RE: [PATCH v3 3/7] arm: dts: dt-bindings: Add Renesas RZ pinctrl header
From: Chris Brandt
Date: Wed Mar 29 2017 - 11:39:42 EST
On Wednesday, March 29, 2017, Chris Brandt wrote:
> On Wednesday, March 29, 2017, Geert Uytterhoeven wrote:
> > > But, what do we do for Ethernet? All the pins are "normal" except
> > > just the MDIO pin needs to be bidirectional.
> > > That's the part I'm confused by.
> > > How do we flag that just the ET_MDIO needs "bidirectional"?
> >
> > You add subnodes, cfr. arch/arm64/boot/dts/renesas/r8a7795-salvator-
> x.dts:
> >
> > avb_pins: avb {
> > mux {
> > groups = "avb_link", "avb_phy_int", "avb_mdc",
> > "avb_mii";
> > function = "avb";
> > };
> >
> > pins_mdc {
> > groups = "avb_mdc";
> > drive-strength = <24>;
> > };
> >
> > pins_mii_tx {
> > pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC",
> > "PIN_AVB_TD0",
> > "PIN_AVB_TD1", "PIN_AVB_TD2",
> > "PIN_AVB_TD3";
> > drive-strength = <12>;
> > };
> > };
>
> Oh, so there is a way!
>
> Thank you.
>
>
> So, for clarity:
Actually, Linus's request was to use "pinmux", not "pins".
So, it should be:
/* P1_6 = RIIC3SCL (bi dir) */
/* P1_7 = RIIC3SDA (bi dir) */
i2c3_pins: i2c3 {
pinmux = <PIN(1, 6) | FUNC_1>,
<PIN(1, 7) | FUNC_1>;
bidirectional;
};
/* Ethernet */
ether_pins: ether {
/* Ethernet on Ports 1,2,3,5 */
mux {
pinmux = <PIN(1, 14) | FUNC_4)>, /* P1_14 = ET_COL */
<PIN(5, 9) | FUNC_2)>, /* P5_9 = ET_MDC */
<PIN(3, 4) | FUNC_2)>, /* P3_4 = ET_RXCLK */
<PIN(3, 5) | FUNC_2)>, /* P3_5 = ET_RXER */
<PIN(3, 6) | FUNC_2)>, /* P3_6 = ET_RXDV */
<PIN(2, 0) | FUNC_2)>, /* P2_0 = ET_TXCLK */
<PIN(2, 1) | FUNC_2)>, /* P2_1 = ET_TXER */
<PIN(2, 2) | FUNC_2)>, /* P2_2 = ET_TXEN */
<PIN(2, 3) | FUNC_2)>, /* P2_3 = ET_CRS */
<PIN(2, 4) | FUNC_2)>, /* P2_4 = ET_TXD0 */
<PIN(2, 5) | FUNC_2)>, /* P2_5 = ET_TXD1 */
<PIN(2, 6) | FUNC_2)>, /* P2_6 = ET_TXD2 */
<PIN(2, 7) | FUNC_2)>, /* P2_7 = ET_TXD3 */
<PIN(2, 8) | FUNC_2)>, /* P2_8 = ET_RXD0 */
<PIN(2, 9) | FUNC_2)>, /* P2_9 = ET_RXD1 */
<PIN(2, 10) | FUNC_2)>, /* P2_10 = ET_RXD2 */
<PIN(2, 11) | FUNC_2)>; /* P2_11 = ET_RXD3 */
};
pins_bidir {
pinmux = <PIN(3, 3) | FUNC_2)>, /* P3_3 = ET_MDIO */
bidirectional;
};
};
NOTE: "FUNC_2" can just be "2" as per Geert's request.
Chris