Re: [PATCH] crypto: vmx: Remove dubiously licensed crypto code

From: Tyrel Datwyler
Date: Wed Mar 29 2017 - 19:30:21 EST


Adding Andy to the discussion as he may be able to shine light on
licensing issue of the crypto perl scripts in question.

-Tyrel

On 03/29/2017 05:56 AM, Michal Suchanek wrote:
> While reviewing commit 11c6e16ee13a ("crypto: vmx - Adding asm
> subroutines for XTS") which adds the OpenSSL license header to
> drivers/crypto/vmx/aesp8-ppc.pl licensing of this driver came into
> qestion. The whole license reads:
>
> # Licensed under the OpenSSL license (the "License"). You may not use
> # this file except in compliance with the License. You can obtain a
> # copy
> # in the file LICENSE in the source distribution or at
> # https://www.openssl.org/source/license.html
>
> #
> # ====================================================================
> # Written by Andy Polyakov <appro@xxxxxxxxxxx> for the OpenSSL
> # project. The module is, however, dual licensed under OpenSSL and
> # CRYPTOGAMS licenses depending on where you obtain it. For further
> # details see http://www.openssl.org/~appro/cryptogams/.
> # ====================================================================
>
> After seeking legal advice it is still not clear that this driver can be
> legally used in Linux. In particular the "depending on where you obtain
> it" part does not make it clear when you can apply the GPL and when the
> OpenSSL license.
>
> I tried contacting the author of the code for clarification but did not
> hear back. In absence of clear licensing the only solution I see is
> removing this code.
>
> Signed-off-by: Michal Suchanek <msuchanek@xxxxxxx>
> ---
> MAINTAINERS | 12 -
> drivers/crypto/Kconfig | 8 -
> drivers/crypto/Makefile | 1 -
> drivers/crypto/vmx/.gitignore | 2 -
> drivers/crypto/vmx/Kconfig | 9 -
> drivers/crypto/vmx/Makefile | 21 -
> drivers/crypto/vmx/aes.c | 150 --
> drivers/crypto/vmx/aes_cbc.c | 202 --
> drivers/crypto/vmx/aes_ctr.c | 191 --
> drivers/crypto/vmx/aes_xts.c | 190 --
> drivers/crypto/vmx/aesp8-ppc.h | 25 -
> drivers/crypto/vmx/aesp8-ppc.pl | 3789 -------------------------------------
> drivers/crypto/vmx/ghash.c | 227 ---
> drivers/crypto/vmx/ghashp8-ppc.pl | 234 ---
> drivers/crypto/vmx/ppc-xlate.pl | 228 ---
> drivers/crypto/vmx/vmx.c | 88 -
> 16 files changed, 5377 deletions(-)
> delete mode 100644 drivers/crypto/vmx/.gitignore
> delete mode 100644 drivers/crypto/vmx/Kconfig
> delete mode 100644 drivers/crypto/vmx/Makefile
> delete mode 100644 drivers/crypto/vmx/aes.c
> delete mode 100644 drivers/crypto/vmx/aes_cbc.c
> delete mode 100644 drivers/crypto/vmx/aes_ctr.c
> delete mode 100644 drivers/crypto/vmx/aes_xts.c
> delete mode 100644 drivers/crypto/vmx/aesp8-ppc.h
> delete mode 100644 drivers/crypto/vmx/aesp8-ppc.pl
> delete mode 100644 drivers/crypto/vmx/ghash.c
> delete mode 100644 drivers/crypto/vmx/ghashp8-ppc.pl
> delete mode 100644 drivers/crypto/vmx/ppc-xlate.pl
> delete mode 100644 drivers/crypto/vmx/vmx.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1b0a87ffffab..fd4cbf046ab4 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6190,18 +6190,6 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux.git
> S: Maintained
> F: arch/ia64/
>
> -IBM Power VMX Cryptographic instructions
> -M: Leonidas S. Barbosa <leosilva@xxxxxxxxxxxxxxxxxx>
> -M: Paulo Flabiano Smorigo <pfsmorigo@xxxxxxxxxxxxxxxxxx>
> -L: linux-crypto@xxxxxxxxxxxxxxx
> -S: Supported
> -F: drivers/crypto/vmx/Makefile
> -F: drivers/crypto/vmx/Kconfig
> -F: drivers/crypto/vmx/vmx.c
> -F: drivers/crypto/vmx/aes*
> -F: drivers/crypto/vmx/ghash*
> -F: drivers/crypto/vmx/ppc-xlate.pl
> -
> IBM Power in-Nest Crypto Acceleration
> M: Leonidas S. Barbosa <leosilva@xxxxxxxxxxxxxxxxxx>
> M: Paulo Flabiano Smorigo <pfsmorigo@xxxxxxxxxxxxxxxxxx>
> diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
> index 473d31288ad8..9fcd3af1f2f1 100644
> --- a/drivers/crypto/Kconfig
> +++ b/drivers/crypto/Kconfig
> @@ -530,14 +530,6 @@ config CRYPTO_DEV_QCE
> hardware. To compile this driver as a module, choose M here. The
> module will be called qcrypto.
>
> -config CRYPTO_DEV_VMX
> - bool "Support for VMX cryptographic acceleration instructions"
> - depends on PPC64 && VSX
> - help
> - Support for VMX cryptographic acceleration instructions.
> -
> -source "drivers/crypto/vmx/Kconfig"
> -
> config CRYPTO_DEV_IMGTEC_HASH
> tristate "Imagination Technologies hardware hash accelerator"
> depends on MIPS || COMPILE_TEST
> diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
> index 739609471169..486e57e10e7a 100644
> --- a/drivers/crypto/Makefile
> +++ b/drivers/crypto/Makefile
> @@ -34,5 +34,4 @@ obj-$(CONFIG_CRYPTO_DEV_SUN4I_SS) += sunxi-ss/
> obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
> obj-$(CONFIG_CRYPTO_DEV_UX500) += ux500/
> obj-$(CONFIG_CRYPTO_DEV_VIRTIO) += virtio/
> -obj-$(CONFIG_CRYPTO_DEV_VMX) += vmx/
> obj-$(CONFIG_CRYPTO_DEV_BCM_SPU) += bcm/
> diff --git a/drivers/crypto/vmx/.gitignore b/drivers/crypto/vmx/.gitignore
> deleted file mode 100644
> index af4a7ce4738d..000000000000
> --- a/drivers/crypto/vmx/.gitignore
> +++ /dev/null
> @@ -1,2 +0,0 @@
> -aesp8-ppc.S
> -ghashp8-ppc.S
> diff --git a/drivers/crypto/vmx/Kconfig b/drivers/crypto/vmx/Kconfig
> deleted file mode 100644
> index c3d524ea6998..000000000000
> --- a/drivers/crypto/vmx/Kconfig
> +++ /dev/null
> @@ -1,9 +0,0 @@
> -config CRYPTO_DEV_VMX_ENCRYPT
> - tristate "Encryption acceleration support on P8 CPU"
> - depends on CRYPTO_DEV_VMX
> - select CRYPTO_GHASH
> - default m
> - help
> - Support for VMX cryptographic acceleration instructions on Power8 CPU.
> - This module supports acceleration for AES and GHASH in hardware. If you
> - choose 'M' here, this module will be called vmx-crypto.
> diff --git a/drivers/crypto/vmx/Makefile b/drivers/crypto/vmx/Makefile
> deleted file mode 100644
> index 55f7c392582f..000000000000
> --- a/drivers/crypto/vmx/Makefile
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -obj-$(CONFIG_CRYPTO_DEV_VMX_ENCRYPT) += vmx-crypto.o
> -vmx-crypto-objs := vmx.o aesp8-ppc.o ghashp8-ppc.o aes.o aes_cbc.o aes_ctr.o aes_xts.o ghash.o
> -
> -ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
> -TARGET := linux-ppc64le
> -else
> -TARGET := linux-ppc64
> -endif
> -
> -quiet_cmd_perl = PERL $@
> - cmd_perl = $(PERL) $(<) $(TARGET) > $(@)
> -
> -targets += aesp8-ppc.S ghashp8-ppc.S
> -
> -$(obj)/aesp8-ppc.S: $(src)/aesp8-ppc.pl FORCE
> - $(call if_changed,perl)
> -
> -$(obj)/ghashp8-ppc.S: $(src)/ghashp8-ppc.pl FORCE
> - $(call if_changed,perl)
> -
> -clean-files := aesp8-ppc.S ghashp8-ppc.S
> diff --git a/drivers/crypto/vmx/aes.c b/drivers/crypto/vmx/aes.c
> deleted file mode 100644
> index 022c7ab7351a..000000000000
> --- a/drivers/crypto/vmx/aes.c
> +++ /dev/null
> @@ -1,150 +0,0 @@
> -/**
> - * AES routines supporting VMX instructions on the Power 8
> - *
> - * Copyright (C) 2015 International Business Machines Inc.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; version 2 only.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> - *
> - * Author: Marcelo Henrique Cerri <mhcerri@xxxxxxxxxx>
> - */
> -
> -#include <linux/types.h>
> -#include <linux/err.h>
> -#include <linux/crypto.h>
> -#include <linux/delay.h>
> -#include <linux/hardirq.h>
> -#include <asm/switch_to.h>
> -#include <crypto/aes.h>
> -
> -#include "aesp8-ppc.h"
> -
> -struct p8_aes_ctx {
> - struct crypto_cipher *fallback;
> - struct aes_key enc_key;
> - struct aes_key dec_key;
> -};
> -
> -static int p8_aes_init(struct crypto_tfm *tfm)
> -{
> - const char *alg;
> - struct crypto_cipher *fallback;
> - struct p8_aes_ctx *ctx = crypto_tfm_ctx(tfm);
> -
> - if (!(alg = crypto_tfm_alg_name(tfm))) {
> - printk(KERN_ERR "Failed to get algorithm name.\n");
> - return -ENOENT;
> - }
> -
> - fallback = crypto_alloc_cipher(alg, 0, CRYPTO_ALG_NEED_FALLBACK);
> - if (IS_ERR(fallback)) {
> - printk(KERN_ERR
> - "Failed to allocate transformation for '%s': %ld\n",
> - alg, PTR_ERR(fallback));
> - return PTR_ERR(fallback);
> - }
> - printk(KERN_INFO "Using '%s' as fallback implementation.\n",
> - crypto_tfm_alg_driver_name((struct crypto_tfm *) fallback));
> -
> - crypto_cipher_set_flags(fallback,
> - crypto_cipher_get_flags((struct
> - crypto_cipher *)
> - tfm));
> - ctx->fallback = fallback;
> -
> - return 0;
> -}
> -
> -static void p8_aes_exit(struct crypto_tfm *tfm)
> -{
> - struct p8_aes_ctx *ctx = crypto_tfm_ctx(tfm);
> -
> - if (ctx->fallback) {
> - crypto_free_cipher(ctx->fallback);
> - ctx->fallback = NULL;
> - }
> -}
> -
> -static int p8_aes_setkey(struct crypto_tfm *tfm, const u8 *key,
> - unsigned int keylen)
> -{
> - int ret;
> - struct p8_aes_ctx *ctx = crypto_tfm_ctx(tfm);
> -
> - preempt_disable();
> - pagefault_disable();
> - enable_kernel_vsx();
> - ret = aes_p8_set_encrypt_key(key, keylen * 8, &ctx->enc_key);
> - ret += aes_p8_set_decrypt_key(key, keylen * 8, &ctx->dec_key);
> - disable_kernel_vsx();
> - pagefault_enable();
> - preempt_enable();
> -
> - ret += crypto_cipher_setkey(ctx->fallback, key, keylen);
> - return ret;
> -}
> -
> -static void p8_aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
> -{
> - struct p8_aes_ctx *ctx = crypto_tfm_ctx(tfm);
> -
> - if (in_interrupt()) {
> - crypto_cipher_encrypt_one(ctx->fallback, dst, src);
> - } else {
> - preempt_disable();
> - pagefault_disable();
> - enable_kernel_vsx();
> - aes_p8_encrypt(src, dst, &ctx->enc_key);
> - disable_kernel_vsx();
> - pagefault_enable();
> - preempt_enable();
> - }
> -}
> -
> -static void p8_aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
> -{
> - struct p8_aes_ctx *ctx = crypto_tfm_ctx(tfm);
> -
> - if (in_interrupt()) {
> - crypto_cipher_decrypt_one(ctx->fallback, dst, src);
> - } else {
> - preempt_disable();
> - pagefault_disable();
> - enable_kernel_vsx();
> - aes_p8_decrypt(src, dst, &ctx->dec_key);
> - disable_kernel_vsx();
> - pagefault_enable();
> - preempt_enable();
> - }
> -}
> -
> -struct crypto_alg p8_aes_alg = {
> - .cra_name = "aes",
> - .cra_driver_name = "p8_aes",
> - .cra_module = THIS_MODULE,
> - .cra_priority = 1000,
> - .cra_type = NULL,
> - .cra_flags = CRYPTO_ALG_TYPE_CIPHER | CRYPTO_ALG_NEED_FALLBACK,
> - .cra_alignmask = 0,
> - .cra_blocksize = AES_BLOCK_SIZE,
> - .cra_ctxsize = sizeof(struct p8_aes_ctx),
> - .cra_init = p8_aes_init,
> - .cra_exit = p8_aes_exit,
> - .cra_cipher = {
> - .cia_min_keysize = AES_MIN_KEY_SIZE,
> - .cia_max_keysize = AES_MAX_KEY_SIZE,
> - .cia_setkey = p8_aes_setkey,
> - .cia_encrypt = p8_aes_encrypt,
> - .cia_decrypt = p8_aes_decrypt,
> - },
> -};
> diff --git a/drivers/crypto/vmx/aes_cbc.c b/drivers/crypto/vmx/aes_cbc.c
> deleted file mode 100644
> index 72a26eb4e954..000000000000
> --- a/drivers/crypto/vmx/aes_cbc.c
> +++ /dev/null
> @@ -1,202 +0,0 @@
> -/**
> - * AES CBC routines supporting VMX instructions on the Power 8
> - *
> - * Copyright (C) 2015 International Business Machines Inc.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; version 2 only.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> - *
> - * Author: Marcelo Henrique Cerri <mhcerri@xxxxxxxxxx>
> - */
> -
> -#include <linux/types.h>
> -#include <linux/err.h>
> -#include <linux/crypto.h>
> -#include <linux/delay.h>
> -#include <linux/hardirq.h>
> -#include <asm/switch_to.h>
> -#include <crypto/aes.h>
> -#include <crypto/scatterwalk.h>
> -#include <crypto/skcipher.h>
> -
> -#include "aesp8-ppc.h"
> -
> -struct p8_aes_cbc_ctx {
> - struct crypto_skcipher *fallback;
> - struct aes_key enc_key;
> - struct aes_key dec_key;
> -};
> -
> -static int p8_aes_cbc_init(struct crypto_tfm *tfm)
> -{
> - const char *alg;
> - struct crypto_skcipher *fallback;
> - struct p8_aes_cbc_ctx *ctx = crypto_tfm_ctx(tfm);
> -
> - if (!(alg = crypto_tfm_alg_name(tfm))) {
> - printk(KERN_ERR "Failed to get algorithm name.\n");
> - return -ENOENT;
> - }
> -
> - fallback = crypto_alloc_skcipher(alg, 0,
> - CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK);
> -
> - if (IS_ERR(fallback)) {
> - printk(KERN_ERR
> - "Failed to allocate transformation for '%s': %ld\n",
> - alg, PTR_ERR(fallback));
> - return PTR_ERR(fallback);
> - }
> - printk(KERN_INFO "Using '%s' as fallback implementation.\n",
> - crypto_skcipher_driver_name(fallback));
> -
> -
> - crypto_skcipher_set_flags(
> - fallback,
> - crypto_skcipher_get_flags((struct crypto_skcipher *)tfm));
> - ctx->fallback = fallback;
> -
> - return 0;
> -}
> -
> -static void p8_aes_cbc_exit(struct crypto_tfm *tfm)
> -{
> - struct p8_aes_cbc_ctx *ctx = crypto_tfm_ctx(tfm);
> -
> - if (ctx->fallback) {
> - crypto_free_skcipher(ctx->fallback);
> - ctx->fallback = NULL;
> - }
> -}
> -
> -static int p8_aes_cbc_setkey(struct crypto_tfm *tfm, const u8 *key,
> - unsigned int keylen)
> -{
> - int ret;
> - struct p8_aes_cbc_ctx *ctx = crypto_tfm_ctx(tfm);
> -
> - preempt_disable();
> - pagefault_disable();
> - enable_kernel_vsx();
> - ret = aes_p8_set_encrypt_key(key, keylen * 8, &ctx->enc_key);
> - ret += aes_p8_set_decrypt_key(key, keylen * 8, &ctx->dec_key);
> - disable_kernel_vsx();
> - pagefault_enable();
> - preempt_enable();
> -
> - ret += crypto_skcipher_setkey(ctx->fallback, key, keylen);
> - return ret;
> -}
> -
> -static int p8_aes_cbc_encrypt(struct blkcipher_desc *desc,
> - struct scatterlist *dst,
> - struct scatterlist *src, unsigned int nbytes)
> -{
> - int ret;
> - struct blkcipher_walk walk;
> - struct p8_aes_cbc_ctx *ctx =
> - crypto_tfm_ctx(crypto_blkcipher_tfm(desc->tfm));
> -
> - if (in_interrupt()) {
> - SKCIPHER_REQUEST_ON_STACK(req, ctx->fallback);
> - skcipher_request_set_tfm(req, ctx->fallback);
> - skcipher_request_set_callback(req, desc->flags, NULL, NULL);
> - skcipher_request_set_crypt(req, src, dst, nbytes, desc->info);
> - ret = crypto_skcipher_encrypt(req);
> - skcipher_request_zero(req);
> - } else {
> - preempt_disable();
> - pagefault_disable();
> - enable_kernel_vsx();
> -
> - blkcipher_walk_init(&walk, dst, src, nbytes);
> - ret = blkcipher_walk_virt(desc, &walk);
> - while ((nbytes = walk.nbytes)) {
> - aes_p8_cbc_encrypt(walk.src.virt.addr,
> - walk.dst.virt.addr,
> - nbytes & AES_BLOCK_MASK,
> - &ctx->enc_key, walk.iv, 1);
> - nbytes &= AES_BLOCK_SIZE - 1;
> - ret = blkcipher_walk_done(desc, &walk, nbytes);
> - }
> -
> - disable_kernel_vsx();
> - pagefault_enable();
> - preempt_enable();
> - }
> -
> - return ret;
> -}
> -
> -static int p8_aes_cbc_decrypt(struct blkcipher_desc *desc,
> - struct scatterlist *dst,
> - struct scatterlist *src, unsigned int nbytes)
> -{
> - int ret;
> - struct blkcipher_walk walk;
> - struct p8_aes_cbc_ctx *ctx =
> - crypto_tfm_ctx(crypto_blkcipher_tfm(desc->tfm));
> -
> - if (in_interrupt()) {
> - SKCIPHER_REQUEST_ON_STACK(req, ctx->fallback);
> - skcipher_request_set_tfm(req, ctx->fallback);
> - skcipher_request_set_callback(req, desc->flags, NULL, NULL);
> - skcipher_request_set_crypt(req, src, dst, nbytes, desc->info);
> - ret = crypto_skcipher_decrypt(req);
> - skcipher_request_zero(req);
> - } else {
> - preempt_disable();
> - pagefault_disable();
> - enable_kernel_vsx();
> -
> - blkcipher_walk_init(&walk, dst, src, nbytes);
> - ret = blkcipher_walk_virt(desc, &walk);
> - while ((nbytes = walk.nbytes)) {
> - aes_p8_cbc_encrypt(walk.src.virt.addr,
> - walk.dst.virt.addr,
> - nbytes & AES_BLOCK_MASK,
> - &ctx->dec_key, walk.iv, 0);
> - nbytes &= AES_BLOCK_SIZE - 1;
> - ret = blkcipher_walk_done(desc, &walk, nbytes);
> - }
> -
> - disable_kernel_vsx();
> - pagefault_enable();
> - preempt_enable();
> - }
> -
> - return ret;
> -}
> -
> -
> -struct crypto_alg p8_aes_cbc_alg = {
> - .cra_name = "cbc(aes)",
> - .cra_driver_name = "p8_aes_cbc",
> - .cra_module = THIS_MODULE,
> - .cra_priority = 2000,
> - .cra_type = &crypto_blkcipher_type,
> - .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | CRYPTO_ALG_NEED_FALLBACK,
> - .cra_alignmask = 0,
> - .cra_blocksize = AES_BLOCK_SIZE,
> - .cra_ctxsize = sizeof(struct p8_aes_cbc_ctx),
> - .cra_init = p8_aes_cbc_init,
> - .cra_exit = p8_aes_cbc_exit,
> - .cra_blkcipher = {
> - .ivsize = AES_BLOCK_SIZE,
> - .min_keysize = AES_MIN_KEY_SIZE,
> - .max_keysize = AES_MAX_KEY_SIZE,
> - .setkey = p8_aes_cbc_setkey,
> - .encrypt = p8_aes_cbc_encrypt,
> - .decrypt = p8_aes_cbc_decrypt,
> - },
> -};
> diff --git a/drivers/crypto/vmx/aes_ctr.c b/drivers/crypto/vmx/aes_ctr.c
> deleted file mode 100644
> index 7cf6d31c1123..000000000000
> --- a/drivers/crypto/vmx/aes_ctr.c
> +++ /dev/null
> @@ -1,191 +0,0 @@
> -/**
> - * AES CTR routines supporting VMX instructions on the Power 8
> - *
> - * Copyright (C) 2015 International Business Machines Inc.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; version 2 only.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> - *
> - * Author: Marcelo Henrique Cerri <mhcerri@xxxxxxxxxx>
> - */
> -
> -#include <linux/types.h>
> -#include <linux/err.h>
> -#include <linux/crypto.h>
> -#include <linux/delay.h>
> -#include <linux/hardirq.h>
> -#include <asm/switch_to.h>
> -#include <crypto/aes.h>
> -#include <crypto/scatterwalk.h>
> -#include "aesp8-ppc.h"
> -
> -struct p8_aes_ctr_ctx {
> - struct crypto_blkcipher *fallback;
> - struct aes_key enc_key;
> -};
> -
> -static int p8_aes_ctr_init(struct crypto_tfm *tfm)
> -{
> - const char *alg;
> - struct crypto_blkcipher *fallback;
> - struct p8_aes_ctr_ctx *ctx = crypto_tfm_ctx(tfm);
> -
> - if (!(alg = crypto_tfm_alg_name(tfm))) {
> - printk(KERN_ERR "Failed to get algorithm name.\n");
> - return -ENOENT;
> - }
> -
> - fallback =
> - crypto_alloc_blkcipher(alg, 0, CRYPTO_ALG_NEED_FALLBACK);
> - if (IS_ERR(fallback)) {
> - printk(KERN_ERR
> - "Failed to allocate transformation for '%s': %ld\n",
> - alg, PTR_ERR(fallback));
> - return PTR_ERR(fallback);
> - }
> - printk(KERN_INFO "Using '%s' as fallback implementation.\n",
> - crypto_tfm_alg_driver_name((struct crypto_tfm *) fallback));
> -
> - crypto_blkcipher_set_flags(
> - fallback,
> - crypto_blkcipher_get_flags((struct crypto_blkcipher *)tfm));
> - ctx->fallback = fallback;
> -
> - return 0;
> -}
> -
> -static void p8_aes_ctr_exit(struct crypto_tfm *tfm)
> -{
> - struct p8_aes_ctr_ctx *ctx = crypto_tfm_ctx(tfm);
> -
> - if (ctx->fallback) {
> - crypto_free_blkcipher(ctx->fallback);
> - ctx->fallback = NULL;
> - }
> -}
> -
> -static int p8_aes_ctr_setkey(struct crypto_tfm *tfm, const u8 *key,
> - unsigned int keylen)
> -{
> - int ret;
> - struct p8_aes_ctr_ctx *ctx = crypto_tfm_ctx(tfm);
> -
> - preempt_disable();
> - pagefault_disable();
> - enable_kernel_vsx();
> - ret = aes_p8_set_encrypt_key(key, keylen * 8, &ctx->enc_key);
> - disable_kernel_vsx();
> - pagefault_enable();
> - preempt_enable();
> -
> - ret += crypto_blkcipher_setkey(ctx->fallback, key, keylen);
> - return ret;
> -}
> -
> -static void p8_aes_ctr_final(struct p8_aes_ctr_ctx *ctx,
> - struct blkcipher_walk *walk)
> -{
> - u8 *ctrblk = walk->iv;
> - u8 keystream[AES_BLOCK_SIZE];
> - u8 *src = walk->src.virt.addr;
> - u8 *dst = walk->dst.virt.addr;
> - unsigned int nbytes = walk->nbytes;
> -
> - preempt_disable();
> - pagefault_disable();
> - enable_kernel_vsx();
> - aes_p8_encrypt(ctrblk, keystream, &ctx->enc_key);
> - disable_kernel_vsx();
> - pagefault_enable();
> - preempt_enable();
> -
> - crypto_xor(keystream, src, nbytes);
> - memcpy(dst, keystream, nbytes);
> - crypto_inc(ctrblk, AES_BLOCK_SIZE);
> -}
> -
> -static int p8_aes_ctr_crypt(struct blkcipher_desc *desc,
> - struct scatterlist *dst,
> - struct scatterlist *src, unsigned int nbytes)
> -{
> - int ret;
> - u64 inc;
> - struct blkcipher_walk walk;
> - struct p8_aes_ctr_ctx *ctx =
> - crypto_tfm_ctx(crypto_blkcipher_tfm(desc->tfm));
> - struct blkcipher_desc fallback_desc = {
> - .tfm = ctx->fallback,
> - .info = desc->info,
> - .flags = desc->flags
> - };
> -
> - if (in_interrupt()) {
> - ret = crypto_blkcipher_encrypt(&fallback_desc, dst, src,
> - nbytes);
> - } else {
> - blkcipher_walk_init(&walk, dst, src, nbytes);
> - ret = blkcipher_walk_virt_block(desc, &walk, AES_BLOCK_SIZE);
> - while ((nbytes = walk.nbytes) >= AES_BLOCK_SIZE) {
> - preempt_disable();
> - pagefault_disable();
> - enable_kernel_vsx();
> - aes_p8_ctr32_encrypt_blocks(walk.src.virt.addr,
> - walk.dst.virt.addr,
> - (nbytes &
> - AES_BLOCK_MASK) /
> - AES_BLOCK_SIZE,
> - &ctx->enc_key,
> - walk.iv);
> - disable_kernel_vsx();
> - pagefault_enable();
> - preempt_enable();
> -
> - /* We need to update IV mostly for last bytes/round */
> - inc = (nbytes & AES_BLOCK_MASK) / AES_BLOCK_SIZE;
> - if (inc > 0)
> - while (inc--)
> - crypto_inc(walk.iv, AES_BLOCK_SIZE);
> -
> - nbytes &= AES_BLOCK_SIZE - 1;
> - ret = blkcipher_walk_done(desc, &walk, nbytes);
> - }
> - if (walk.nbytes) {
> - p8_aes_ctr_final(ctx, &walk);
> - ret = blkcipher_walk_done(desc, &walk, 0);
> - }
> - }
> -
> - return ret;
> -}
> -
> -struct crypto_alg p8_aes_ctr_alg = {
> - .cra_name = "ctr(aes)",
> - .cra_driver_name = "p8_aes_ctr",
> - .cra_module = THIS_MODULE,
> - .cra_priority = 2000,
> - .cra_type = &crypto_blkcipher_type,
> - .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | CRYPTO_ALG_NEED_FALLBACK,
> - .cra_alignmask = 0,
> - .cra_blocksize = 1,
> - .cra_ctxsize = sizeof(struct p8_aes_ctr_ctx),
> - .cra_init = p8_aes_ctr_init,
> - .cra_exit = p8_aes_ctr_exit,
> - .cra_blkcipher = {
> - .ivsize = AES_BLOCK_SIZE,
> - .min_keysize = AES_MIN_KEY_SIZE,
> - .max_keysize = AES_MAX_KEY_SIZE,
> - .setkey = p8_aes_ctr_setkey,
> - .encrypt = p8_aes_ctr_crypt,
> - .decrypt = p8_aes_ctr_crypt,
> - },
> -};
> diff --git a/drivers/crypto/vmx/aes_xts.c b/drivers/crypto/vmx/aes_xts.c
> deleted file mode 100644
> index 6adc9290557a..000000000000
> --- a/drivers/crypto/vmx/aes_xts.c
> +++ /dev/null
> @@ -1,190 +0,0 @@
> -/**
> - * AES XTS routines supporting VMX In-core instructions on Power 8
> - *
> - * Copyright (C) 2015 International Business Machines Inc.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundations; version 2 only.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY of FITNESS FOR A PARTICUPAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> - *
> - * Author: Leonidas S. Barbosa <leosilva@xxxxxxxxxxxxxxxxxx>
> - */
> -
> -#include <linux/types.h>
> -#include <linux/err.h>
> -#include <linux/crypto.h>
> -#include <linux/delay.h>
> -#include <linux/hardirq.h>
> -#include <asm/switch_to.h>
> -#include <crypto/aes.h>
> -#include <crypto/scatterwalk.h>
> -#include <crypto/xts.h>
> -#include <crypto/skcipher.h>
> -
> -#include "aesp8-ppc.h"
> -
> -struct p8_aes_xts_ctx {
> - struct crypto_skcipher *fallback;
> - struct aes_key enc_key;
> - struct aes_key dec_key;
> - struct aes_key tweak_key;
> -};
> -
> -static int p8_aes_xts_init(struct crypto_tfm *tfm)
> -{
> - const char *alg;
> - struct crypto_skcipher *fallback;
> - struct p8_aes_xts_ctx *ctx = crypto_tfm_ctx(tfm);
> -
> - if (!(alg = crypto_tfm_alg_name(tfm))) {
> - printk(KERN_ERR "Failed to get algorithm name.\n");
> - return -ENOENT;
> - }
> -
> - fallback = crypto_alloc_skcipher(alg, 0,
> - CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK);
> - if (IS_ERR(fallback)) {
> - printk(KERN_ERR
> - "Failed to allocate transformation for '%s': %ld\n",
> - alg, PTR_ERR(fallback));
> - return PTR_ERR(fallback);
> - }
> - printk(KERN_INFO "Using '%s' as fallback implementation.\n",
> - crypto_skcipher_driver_name(fallback));
> -
> - crypto_skcipher_set_flags(
> - fallback,
> - crypto_skcipher_get_flags((struct crypto_skcipher *)tfm));
> - ctx->fallback = fallback;
> -
> - return 0;
> -}
> -
> -static void p8_aes_xts_exit(struct crypto_tfm *tfm)
> -{
> - struct p8_aes_xts_ctx *ctx = crypto_tfm_ctx(tfm);
> -
> - if (ctx->fallback) {
> - crypto_free_skcipher(ctx->fallback);
> - ctx->fallback = NULL;
> - }
> -}
> -
> -static int p8_aes_xts_setkey(struct crypto_tfm *tfm, const u8 *key,
> - unsigned int keylen)
> -{
> - int ret;
> - struct p8_aes_xts_ctx *ctx = crypto_tfm_ctx(tfm);
> -
> - ret = xts_check_key(tfm, key, keylen);
> - if (ret)
> - return ret;
> -
> - preempt_disable();
> - pagefault_disable();
> - enable_kernel_vsx();
> - ret = aes_p8_set_encrypt_key(key + keylen/2, (keylen/2) * 8, &ctx->tweak_key);
> - ret += aes_p8_set_encrypt_key(key, (keylen/2) * 8, &ctx->enc_key);
> - ret += aes_p8_set_decrypt_key(key, (keylen/2) * 8, &ctx->dec_key);
> - disable_kernel_vsx();
> - pagefault_enable();
> - preempt_enable();
> -
> - ret += crypto_skcipher_setkey(ctx->fallback, key, keylen);
> - return ret;
> -}
> -
> -static int p8_aes_xts_crypt(struct blkcipher_desc *desc,
> - struct scatterlist *dst,
> - struct scatterlist *src,
> - unsigned int nbytes, int enc)
> -{
> - int ret;
> - u8 tweak[AES_BLOCK_SIZE];
> - u8 *iv;
> - struct blkcipher_walk walk;
> - struct p8_aes_xts_ctx *ctx =
> - crypto_tfm_ctx(crypto_blkcipher_tfm(desc->tfm));
> -
> - if (in_interrupt()) {
> - SKCIPHER_REQUEST_ON_STACK(req, ctx->fallback);
> - skcipher_request_set_tfm(req, ctx->fallback);
> - skcipher_request_set_callback(req, desc->flags, NULL, NULL);
> - skcipher_request_set_crypt(req, src, dst, nbytes, desc->info);
> - ret = enc? crypto_skcipher_encrypt(req) : crypto_skcipher_decrypt(req);
> - skcipher_request_zero(req);
> - } else {
> - preempt_disable();
> - pagefault_disable();
> - enable_kernel_vsx();
> -
> - blkcipher_walk_init(&walk, dst, src, nbytes);
> -
> - ret = blkcipher_walk_virt(desc, &walk);
> - iv = walk.iv;
> - memset(tweak, 0, AES_BLOCK_SIZE);
> - aes_p8_encrypt(iv, tweak, &ctx->tweak_key);
> -
> - while ((nbytes = walk.nbytes)) {
> - if (enc)
> - aes_p8_xts_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
> - nbytes & AES_BLOCK_MASK, &ctx->enc_key, NULL, tweak);
> - else
> - aes_p8_xts_decrypt(walk.src.virt.addr, walk.dst.virt.addr,
> - nbytes & AES_BLOCK_MASK, &ctx->dec_key, NULL, tweak);
> -
> - nbytes &= AES_BLOCK_SIZE - 1;
> - ret = blkcipher_walk_done(desc, &walk, nbytes);
> - }
> -
> - disable_kernel_vsx();
> - pagefault_enable();
> - preempt_enable();
> - }
> - return ret;
> -}
> -
> -static int p8_aes_xts_encrypt(struct blkcipher_desc *desc,
> - struct scatterlist *dst,
> - struct scatterlist *src, unsigned int nbytes)
> -{
> - return p8_aes_xts_crypt(desc, dst, src, nbytes, 1);
> -}
> -
> -static int p8_aes_xts_decrypt(struct blkcipher_desc *desc,
> - struct scatterlist *dst,
> - struct scatterlist *src, unsigned int nbytes)
> -{
> - return p8_aes_xts_crypt(desc, dst, src, nbytes, 0);
> -}
> -
> -struct crypto_alg p8_aes_xts_alg = {
> - .cra_name = "xts(aes)",
> - .cra_driver_name = "p8_aes_xts",
> - .cra_module = THIS_MODULE,
> - .cra_priority = 2000,
> - .cra_type = &crypto_blkcipher_type,
> - .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | CRYPTO_ALG_NEED_FALLBACK,
> - .cra_alignmask = 0,
> - .cra_blocksize = AES_BLOCK_SIZE,
> - .cra_ctxsize = sizeof(struct p8_aes_xts_ctx),
> - .cra_init = p8_aes_xts_init,
> - .cra_exit = p8_aes_xts_exit,
> - .cra_blkcipher = {
> - .ivsize = AES_BLOCK_SIZE,
> - .min_keysize = 2 * AES_MIN_KEY_SIZE,
> - .max_keysize = 2 * AES_MAX_KEY_SIZE,
> - .setkey = p8_aes_xts_setkey,
> - .encrypt = p8_aes_xts_encrypt,
> - .decrypt = p8_aes_xts_decrypt,
> - }
> -};
> diff --git a/drivers/crypto/vmx/aesp8-ppc.h b/drivers/crypto/vmx/aesp8-ppc.h
> deleted file mode 100644
> index 01972e16a6c0..000000000000
> --- a/drivers/crypto/vmx/aesp8-ppc.h
> +++ /dev/null
> @@ -1,25 +0,0 @@
> -#include <linux/types.h>
> -#include <crypto/aes.h>
> -
> -#define AES_BLOCK_MASK (~(AES_BLOCK_SIZE-1))
> -
> -struct aes_key {
> - u8 key[AES_MAX_KEYLENGTH];
> - int rounds;
> -};
> -
> -int aes_p8_set_encrypt_key(const u8 *userKey, const int bits,
> - struct aes_key *key);
> -int aes_p8_set_decrypt_key(const u8 *userKey, const int bits,
> - struct aes_key *key);
> -void aes_p8_encrypt(const u8 *in, u8 *out, const struct aes_key *key);
> -void aes_p8_decrypt(const u8 *in, u8 *out, const struct aes_key *key);
> -void aes_p8_cbc_encrypt(const u8 *in, u8 *out, size_t len,
> - const struct aes_key *key, u8 *iv, const int enc);
> -void aes_p8_ctr32_encrypt_blocks(const u8 *in, u8 *out,
> - size_t len, const struct aes_key *key,
> - const u8 *iv);
> -void aes_p8_xts_encrypt(const u8 *in, u8 *out, size_t len,
> - const struct aes_key *key1, const struct aes_key *key2, u8 *iv);
> -void aes_p8_xts_decrypt(const u8 *in, u8 *out, size_t len,
> - const struct aes_key *key1, const struct aes_key *key2, u8 *iv);
> diff --git a/drivers/crypto/vmx/aesp8-ppc.pl b/drivers/crypto/vmx/aesp8-ppc.pl
> deleted file mode 100644
> index 0b4a293b8a1e..000000000000
> --- a/drivers/crypto/vmx/aesp8-ppc.pl
> +++ /dev/null
> @@ -1,3789 +0,0 @@
> -#! /usr/bin/env perl
> -# Copyright 2014-2016 The OpenSSL Project Authors. All Rights Reserved.
> -#
> -# Licensed under the OpenSSL license (the "License"). You may not use
> -# this file except in compliance with the License. You can obtain a copy
> -# in the file LICENSE in the source distribution or at
> -# https://www.openssl.org/source/license.html
> -
> -#
> -# ====================================================================
> -# Written by Andy Polyakov <appro@xxxxxxxxxxx> for the OpenSSL
> -# project. The module is, however, dual licensed under OpenSSL and
> -# CRYPTOGAMS licenses depending on where you obtain it. For further
> -# details see http://www.openssl.org/~appro/cryptogams/.
> -# ====================================================================
> -#
> -# This module implements support for AES instructions as per PowerISA
> -# specification version 2.07, first implemented by POWER8 processor.
> -# The module is endian-agnostic in sense that it supports both big-
> -# and little-endian cases. Data alignment in parallelizable modes is
> -# handled with VSX loads and stores, which implies MSR.VSX flag being
> -# set. It should also be noted that ISA specification doesn't prohibit
> -# alignment exceptions for these instructions on page boundaries.
> -# Initially alignment was handled in pure AltiVec/VMX way [when data
> -# is aligned programmatically, which in turn guarantees exception-
> -# free execution], but it turned to hamper performance when vcipher
> -# instructions are interleaved. It's reckoned that eventual
> -# misalignment penalties at page boundaries are in average lower
> -# than additional overhead in pure AltiVec approach.
> -#
> -# May 2016
> -#
> -# Add XTS subroutine, 9x on little- and 12x improvement on big-endian
> -# systems were measured.
> -#
> -######################################################################
> -# Current large-block performance in cycles per byte processed with
> -# 128-bit key (less is better).
> -#
> -# CBC en-/decrypt CTR XTS
> -# POWER8[le] 3.96/0.72 0.74 1.1
> -# POWER8[be] 3.75/0.65 0.66 1.0
> -
> -$flavour = shift;
> -
> -if ($flavour =~ /64/) {
> - $SIZE_T =8;
> - $LRSAVE =2*$SIZE_T;
> - $STU ="stdu";
> - $POP ="ld";
> - $PUSH ="std";
> - $UCMP ="cmpld";
> - $SHL ="sldi";
> -} elsif ($flavour =~ /32/) {
> - $SIZE_T =4;
> - $LRSAVE =$SIZE_T;
> - $STU ="stwu";
> - $POP ="lwz";
> - $PUSH ="stw";
> - $UCMP ="cmplw";
> - $SHL ="slwi";
> -} else { die "nonsense $flavour"; }
> -
> -$LITTLE_ENDIAN = ($flavour=~/le$/) ? $SIZE_T : 0;
> -
> -$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
> -( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
> -( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
> -die "can't locate ppc-xlate.pl";
> -
> -open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
> -
> -$FRAME=8*$SIZE_T;
> -$prefix="aes_p8";
> -
> -$sp="r1";
> -$vrsave="r12";
> -
> -#########################################################################
> -{{{ # Key setup procedures #
> -my ($inp,$bits,$out,$ptr,$cnt,$rounds)=map("r$_",(3..8));
> -my ($zero,$in0,$in1,$key,$rcon,$mask,$tmp)=map("v$_",(0..6));
> -my ($stage,$outperm,$outmask,$outhead,$outtail)=map("v$_",(7..11));
> -
> -$code.=<<___;
> -.machine "any"
> -
> -.text
> -
> -.align 7
> -rcon:
> -.long 0x01000000, 0x01000000, 0x01000000, 0x01000000 ?rev
> -.long 0x1b000000, 0x1b000000, 0x1b000000, 0x1b000000 ?rev
> -.long 0x0d0e0f0c, 0x0d0e0f0c, 0x0d0e0f0c, 0x0d0e0f0c ?rev
> -.long 0,0,0,0 ?asis
> -Lconsts:
> - mflr r0
> - bcl 20,31,\$+4
> - mflr $ptr #vvvvv "distance between . and rcon
> - addi $ptr,$ptr,-0x48
> - mtlr r0
> - blr
> - .long 0
> - .byte 0,12,0x14,0,0,0,0,0
> -.asciz "AES for PowerISA 2.07, CRYPTOGAMS by <appro\@openssl.org>"
> -
> -.globl .${prefix}_set_encrypt_key
> -Lset_encrypt_key:
> - mflr r11
> - $PUSH r11,$LRSAVE($sp)
> -
> - li $ptr,-1
> - ${UCMP}i $inp,0
> - beq- Lenc_key_abort # if ($inp==0) return -1;
> - ${UCMP}i $out,0
> - beq- Lenc_key_abort # if ($out==0) return -1;
> - li $ptr,-2
> - cmpwi $bits,128
> - blt- Lenc_key_abort
> - cmpwi $bits,256
> - bgt- Lenc_key_abort
> - andi. r0,$bits,0x3f
> - bne- Lenc_key_abort
> -
> - lis r0,0xfff0
> - mfspr $vrsave,256
> - mtspr 256,r0
> -
> - bl Lconsts
> - mtlr r11
> -
> - neg r9,$inp
> - lvx $in0,0,$inp
> - addi $inp,$inp,15 # 15 is not typo
> - lvsr $key,0,r9 # borrow $key
> - li r8,0x20
> - cmpwi $bits,192
> - lvx $in1,0,$inp
> - le?vspltisb $mask,0x0f # borrow $mask
> - lvx $rcon,0,$ptr
> - le?vxor $key,$key,$mask # adjust for byte swap
> - lvx $mask,r8,$ptr
> - addi $ptr,$ptr,0x10
> - vperm $in0,$in0,$in1,$key # align [and byte swap in LE]
> - li $cnt,8
> - vxor $zero,$zero,$zero
> - mtctr $cnt
> -
> - ?lvsr $outperm,0,$out
> - vspltisb $outmask,-1
> - lvx $outhead,0,$out
> - ?vperm $outmask,$zero,$outmask,$outperm
> -
> - blt Loop128
> - addi $inp,$inp,8
> - beq L192
> - addi $inp,$inp,8
> - b L256
> -
> -.align 4
> -Loop128:
> - vperm $key,$in0,$in0,$mask # rotate-n-splat
> - vsldoi $tmp,$zero,$in0,12 # >>32
> - vperm $outtail,$in0,$in0,$outperm # rotate
> - vsel $stage,$outhead,$outtail,$outmask
> - vmr $outhead,$outtail
> - vcipherlast $key,$key,$rcon
> - stvx $stage,0,$out
> - addi $out,$out,16
> -
> - vxor $in0,$in0,$tmp
> - vsldoi $tmp,$zero,$tmp,12 # >>32
> - vxor $in0,$in0,$tmp
> - vsldoi $tmp,$zero,$tmp,12 # >>32
> - vxor $in0,$in0,$tmp
> - vadduwm $rcon,$rcon,$rcon
> - vxor $in0,$in0,$key
> - bdnz Loop128
> -
> - lvx $rcon,0,$ptr # last two round keys
> -
> - vperm $key,$in0,$in0,$mask # rotate-n-splat
> - vsldoi $tmp,$zero,$in0,12 # >>32
> - vperm $outtail,$in0,$in0,$outperm # rotate
> - vsel $stage,$outhead,$outtail,$outmask
> - vmr $outhead,$outtail
> - vcipherlast $key,$key,$rcon
> - stvx $stage,0,$out
> - addi $out,$out,16
> -
> - vxor $in0,$in0,$tmp
> - vsldoi $tmp,$zero,$tmp,12 # >>32
> - vxor $in0,$in0,$tmp
> - vsldoi $tmp,$zero,$tmp,12 # >>32
> - vxor $in0,$in0,$tmp
> - vadduwm $rcon,$rcon,$rcon
> - vxor $in0,$in0,$key
> -
> - vperm $key,$in0,$in0,$mask # rotate-n-splat
> - vsldoi $tmp,$zero,$in0,12 # >>32
> - vperm $outtail,$in0,$in0,$outperm # rotate
> - vsel $stage,$outhead,$outtail,$outmask
> - vmr $outhead,$outtail
> - vcipherlast $key,$key,$rcon
> - stvx $stage,0,$out
> - addi $out,$out,16
> -
> - vxor $in0,$in0,$tmp
> - vsldoi $tmp,$zero,$tmp,12 # >>32
> - vxor $in0,$in0,$tmp
> - vsldoi $tmp,$zero,$tmp,12 # >>32
> - vxor $in0,$in0,$tmp
> - vxor $in0,$in0,$key
> - vperm $outtail,$in0,$in0,$outperm # rotate
> - vsel $stage,$outhead,$outtail,$outmask
> - vmr $outhead,$outtail
> - stvx $stage,0,$out
> -
> - addi $inp,$out,15 # 15 is not typo
> - addi $out,$out,0x50
> -
> - li $rounds,10
> - b Ldone
> -
> -.align 4
> -L192:
> - lvx $tmp,0,$inp
> - li $cnt,4
> - vperm $outtail,$in0,$in0,$outperm # rotate
> - vsel $stage,$outhead,$outtail,$outmask
> - vmr $outhead,$outtail
> - stvx $stage,0,$out
> - addi $out,$out,16
> - vperm $in1,$in1,$tmp,$key # align [and byte swap in LE]
> - vspltisb $key,8 # borrow $key
> - mtctr $cnt
> - vsububm $mask,$mask,$key # adjust the mask
> -
> -Loop192:
> - vperm $key,$in1,$in1,$mask # roate-n-splat
> - vsldoi $tmp,$zero,$in0,12 # >>32
> - vcipherlast $key,$key,$rcon
> -
> - vxor $in0,$in0,$tmp
> - vsldoi $tmp,$zero,$tmp,12 # >>32
> - vxor $in0,$in0,$tmp
> - vsldoi $tmp,$zero,$tmp,12 # >>32
> - vxor $in0,$in0,$tmp
> -
> - vsldoi $stage,$zero,$in1,8
> - vspltw $tmp,$in0,3
> - vxor $tmp,$tmp,$in1
> - vsldoi $in1,$zero,$in1,12 # >>32
> - vadduwm $rcon,$rcon,$rcon
> - vxor $in1,$in1,$tmp
> - vxor $in0,$in0,$key
> - vxor $in1,$in1,$key
> - vsldoi $stage,$stage,$in0,8
> -
> - vperm $key,$in1,$in1,$mask # rotate-n-splat
> - vsldoi $tmp,$zero,$in0,12 # >>32
> - vperm $outtail,$stage,$stage,$outperm # rotate
> - vsel $stage,$outhead,$outtail,$outmask
> - vmr $outhead,$outtail
> - vcipherlast $key,$key,$rcon
> - stvx $stage,0,$out
> - addi $out,$out,16
> -
> - vsldoi $stage,$in0,$in1,8
> - vxor $in0,$in0,$tmp
> - vsldoi $tmp,$zero,$tmp,12 # >>32
> - vperm $outtail,$stage,$stage,$outperm # rotate
> - vsel $stage,$outhead,$outtail,$outmask
> - vmr $outhead,$outtail
> - vxor $in0,$in0,$tmp
> - vsldoi $tmp,$zero,$tmp,12 # >>32
> - vxor $in0,$in0,$tmp
> - stvx $stage,0,$out
> - addi $out,$out,16
> -
> - vspltw $tmp,$in0,3
> - vxor $tmp,$tmp,$in1
> - vsldoi $in1,$zero,$in1,12 # >>32
> - vadduwm $rcon,$rcon,$rcon
> - vxor $in1,$in1,$tmp
> - vxor $in0,$in0,$key
> - vxor $in1,$in1,$key
> - vperm $outtail,$in0,$in0,$outperm # rotate
> - vsel $stage,$outhead,$outtail,$outmask
> - vmr $outhead,$outtail
> - stvx $stage,0,$out
> - addi $inp,$out,15 # 15 is not typo
> - addi $out,$out,16
> - bdnz Loop192
> -
> - li $rounds,12
> - addi $out,$out,0x20
> - b Ldone
> -
> -.align 4
> -L256:
> - lvx $tmp,0,$inp
> - li $cnt,7
> - li $rounds,14
> - vperm $outtail,$in0,$in0,$outperm # rotate
> - vsel $stage,$outhead,$outtail,$outmask
> - vmr $outhead,$outtail
> - stvx $stage,0,$out
> - addi $out,$out,16
> - vperm $in1,$in1,$tmp,$key # align [and byte swap in LE]
> - mtctr $cnt
> -
> -Loop256:
> - vperm $key,$in1,$in1,$mask # rotate-n-splat
> - vsldoi $tmp,$zero,$in0,12 # >>32
> - vperm $outtail,$in1,$in1,$outperm # rotate
> - vsel $stage,$outhead,$outtail,$outmask
> - vmr $outhead,$outtail
> - vcipherlast $key,$key,$rcon
> - stvx $stage,0,$out
> - addi $out,$out,16
> -
> - vxor $in0,$in0,$tmp
> - vsldoi $tmp,$zero,$tmp,12 # >>32
> - vxor $in0,$in0,$tmp
> - vsldoi $tmp,$zero,$tmp,12 # >>32
> - vxor $in0,$in0,$tmp
> - vadduwm $rcon,$rcon,$rcon
> - vxor $in0,$in0,$key
> - vperm $outtail,$in0,$in0,$outperm # rotate
> - vsel $stage,$outhead,$outtail,$outmask
> - vmr $outhead,$outtail
> - stvx $stage,0,$out
> - addi $inp,$out,15 # 15 is not typo
> - addi $out,$out,16
> - bdz Ldone
> -
> - vspltw $key,$in0,3 # just splat
> - vsldoi $tmp,$zero,$in1,12 # >>32
> - vsbox $key,$key
> -
> - vxor $in1,$in1,$tmp
> - vsldoi $tmp,$zero,$tmp,12 # >>32
> - vxor $in1,$in1,$tmp
> - vsldoi $tmp,$zero,$tmp,12 # >>32
> - vxor $in1,$in1,$tmp
> -
> - vxor $in1,$in1,$key
> - b Loop256
> -
> -.align 4
> -Ldone:
> - lvx $in1,0,$inp # redundant in aligned case
> - vsel $in1,$outhead,$in1,$outmask
> - stvx $in1,0,$inp
> - li $ptr,0
> - mtspr 256,$vrsave
> - stw $rounds,0($out)
> -
> -Lenc_key_abort:
> - mr r3,$ptr
> - blr
> - .long 0
> - .byte 0,12,0x14,1,0,0,3,0
> - .long 0
> -.size .${prefix}_set_encrypt_key,.-.${prefix}_set_encrypt_key
> -
> -.globl .${prefix}_set_decrypt_key
> - $STU $sp,-$FRAME($sp)
> - mflr r10
> - $PUSH r10,$FRAME+$LRSAVE($sp)
> - bl Lset_encrypt_key
> - mtlr r10
> -
> - cmpwi r3,0
> - bne- Ldec_key_abort
> -
> - slwi $cnt,$rounds,4
> - subi $inp,$out,240 # first round key
> - srwi $rounds,$rounds,1
> - add $out,$inp,$cnt # last round key
> - mtctr $rounds
> -
> -Ldeckey:
> - lwz r0, 0($inp)
> - lwz r6, 4($inp)
> - lwz r7, 8($inp)
> - lwz r8, 12($inp)
> - addi $inp,$inp,16
> - lwz r9, 0($out)
> - lwz r10,4($out)
> - lwz r11,8($out)
> - lwz r12,12($out)
> - stw r0, 0($out)
> - stw r6, 4($out)
> - stw r7, 8($out)
> - stw r8, 12($out)
> - subi $out,$out,16
> - stw r9, -16($inp)
> - stw r10,-12($inp)
> - stw r11,-8($inp)
> - stw r12,-4($inp)
> - bdnz Ldeckey
> -
> - xor r3,r3,r3 # return value
> -Ldec_key_abort:
> - addi $sp,$sp,$FRAME
> - blr
> - .long 0
> - .byte 0,12,4,1,0x80,0,3,0
> - .long 0
> -.size .${prefix}_set_decrypt_key,.-.${prefix}_set_decrypt_key
> -___
> -}}}
> -#########################################################################
> -{{{ # Single block en- and decrypt procedures #
> -sub gen_block () {
> -my $dir = shift;
> -my $n = $dir eq "de" ? "n" : "";
> -my ($inp,$out,$key,$rounds,$idx)=map("r$_",(3..7));
> -
> -$code.=<<___;
> -.globl .${prefix}_${dir}crypt
> - lwz $rounds,240($key)
> - lis r0,0xfc00
> - mfspr $vrsave,256
> - li $idx,15 # 15 is not typo
> - mtspr 256,r0
> -
> - lvx v0,0,$inp
> - neg r11,$out
> - lvx v1,$idx,$inp
> - lvsl v2,0,$inp # inpperm
> - le?vspltisb v4,0x0f
> - ?lvsl v3,0,r11 # outperm
> - le?vxor v2,v2,v4
> - li $idx,16
> - vperm v0,v0,v1,v2 # align [and byte swap in LE]
> - lvx v1,0,$key
> - ?lvsl v5,0,$key # keyperm
> - srwi $rounds,$rounds,1
> - lvx v2,$idx,$key
> - addi $idx,$idx,16
> - subi $rounds,$rounds,1
> - ?vperm v1,v1,v2,v5 # align round key
> -
> - vxor v0,v0,v1
> - lvx v1,$idx,$key
> - addi $idx,$idx,16
> - mtctr $rounds
> -
> -Loop_${dir}c:
> - ?vperm v2,v2,v1,v5
> - v${n}cipher v0,v0,v2
> - lvx v2,$idx,$key
> - addi $idx,$idx,16
> - ?vperm v1,v1,v2,v5
> - v${n}cipher v0,v0,v1
> - lvx v1,$idx,$key
> - addi $idx,$idx,16
> - bdnz Loop_${dir}c
> -
> - ?vperm v2,v2,v1,v5
> - v${n}cipher v0,v0,v2
> - lvx v2,$idx,$key
> - ?vperm v1,v1,v2,v5
> - v${n}cipherlast v0,v0,v1
> -
> - vspltisb v2,-1
> - vxor v1,v1,v1
> - li $idx,15 # 15 is not typo
> - ?vperm v2,v1,v2,v3 # outmask
> - le?vxor v3,v3,v4
> - lvx v1,0,$out # outhead
> - vperm v0,v0,v0,v3 # rotate [and byte swap in LE]
> - vsel v1,v1,v0,v2
> - lvx v4,$idx,$out
> - stvx v1,0,$out
> - vsel v0,v0,v4,v2
> - stvx v0,$idx,$out
> -
> - mtspr 256,$vrsave
> - blr
> - .long 0
> - .byte 0,12,0x14,0,0,0,3,0
> - .long 0
> -.size .${prefix}_${dir}crypt,.-.${prefix}_${dir}crypt
> -___
> -}
> -&gen_block("en");
> -&gen_block("de");
> -}}}
> -#########################################################################
> -{{{ # CBC en- and decrypt procedures #
> -my ($inp,$out,$len,$key,$ivp,$enc,$rounds,$idx)=map("r$_",(3..10));
> -my ($rndkey0,$rndkey1,$inout,$tmp)= map("v$_",(0..3));
> -my ($ivec,$inptail,$inpperm,$outhead,$outperm,$outmask,$keyperm)=
> - map("v$_",(4..10));
> -$code.=<<___;
> -.globl .${prefix}_cbc_encrypt
> - ${UCMP}i $len,16
> - bltlr-
> -
> - cmpwi $enc,0 # test direction
> - lis r0,0xffe0
> - mfspr $vrsave,256
> - mtspr 256,r0
> -
> - li $idx,15
> - vxor $rndkey0,$rndkey0,$rndkey0
> - le?vspltisb $tmp,0x0f
> -
> - lvx $ivec,0,$ivp # load [unaligned] iv
> - lvsl $inpperm,0,$ivp
> - lvx $inptail,$idx,$ivp
> - le?vxor $inpperm,$inpperm,$tmp
> - vperm $ivec,$ivec,$inptail,$inpperm
> -
> - neg r11,$inp
> - ?lvsl $keyperm,0,$key # prepare for unaligned key
> - lwz $rounds,240($key)
> -
> - lvsr $inpperm,0,r11 # prepare for unaligned load
> - lvx $inptail,0,$inp
> - addi $inp,$inp,15 # 15 is not typo
> - le?vxor $inpperm,$inpperm,$tmp
> -
> - ?lvsr $outperm,0,$out # prepare for unaligned store
> - vspltisb $outmask,-1
> - lvx $outhead,0,$out
> - ?vperm $outmask,$rndkey0,$outmask,$outperm
> - le?vxor $outperm,$outperm,$tmp
> -
> - srwi $rounds,$rounds,1
> - li $idx,16
> - subi $rounds,$rounds,1
> - beq Lcbc_dec
> -
> -Lcbc_enc:
> - vmr $inout,$inptail
> - lvx $inptail,0,$inp
> - addi $inp,$inp,16
> - mtctr $rounds
> - subi $len,$len,16 # len-=16
> -
> - lvx $rndkey0,0,$key
> - vperm $inout,$inout,$inptail,$inpperm
> - lvx $rndkey1,$idx,$key
> - addi $idx,$idx,16
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vxor $inout,$inout,$rndkey0
> - lvx $rndkey0,$idx,$key
> - addi $idx,$idx,16
> - vxor $inout,$inout,$ivec
> -
> -Loop_cbc_enc:
> - ?vperm $rndkey1,$rndkey1,$rndkey0,$keyperm
> - vcipher $inout,$inout,$rndkey1
> - lvx $rndkey1,$idx,$key
> - addi $idx,$idx,16
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vcipher $inout,$inout,$rndkey0
> - lvx $rndkey0,$idx,$key
> - addi $idx,$idx,16
> - bdnz Loop_cbc_enc
> -
> - ?vperm $rndkey1,$rndkey1,$rndkey0,$keyperm
> - vcipher $inout,$inout,$rndkey1
> - lvx $rndkey1,$idx,$key
> - li $idx,16
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vcipherlast $ivec,$inout,$rndkey0
> - ${UCMP}i $len,16
> -
> - vperm $tmp,$ivec,$ivec,$outperm
> - vsel $inout,$outhead,$tmp,$outmask
> - vmr $outhead,$tmp
> - stvx $inout,0,$out
> - addi $out,$out,16
> - bge Lcbc_enc
> -
> - b Lcbc_done
> -
> -.align 4
> -Lcbc_dec:
> - ${UCMP}i $len,128
> - bge _aesp8_cbc_decrypt8x
> - vmr $tmp,$inptail
> - lvx $inptail,0,$inp
> - addi $inp,$inp,16
> - mtctr $rounds
> - subi $len,$len,16 # len-=16
> -
> - lvx $rndkey0,0,$key
> - vperm $tmp,$tmp,$inptail,$inpperm
> - lvx $rndkey1,$idx,$key
> - addi $idx,$idx,16
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vxor $inout,$tmp,$rndkey0
> - lvx $rndkey0,$idx,$key
> - addi $idx,$idx,16
> -
> -Loop_cbc_dec:
> - ?vperm $rndkey1,$rndkey1,$rndkey0,$keyperm
> - vncipher $inout,$inout,$rndkey1
> - lvx $rndkey1,$idx,$key
> - addi $idx,$idx,16
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vncipher $inout,$inout,$rndkey0
> - lvx $rndkey0,$idx,$key
> - addi $idx,$idx,16
> - bdnz Loop_cbc_dec
> -
> - ?vperm $rndkey1,$rndkey1,$rndkey0,$keyperm
> - vncipher $inout,$inout,$rndkey1
> - lvx $rndkey1,$idx,$key
> - li $idx,16
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vncipherlast $inout,$inout,$rndkey0
> - ${UCMP}i $len,16
> -
> - vxor $inout,$inout,$ivec
> - vmr $ivec,$tmp
> - vperm $tmp,$inout,$inout,$outperm
> - vsel $inout,$outhead,$tmp,$outmask
> - vmr $outhead,$tmp
> - stvx $inout,0,$out
> - addi $out,$out,16
> - bge Lcbc_dec
> -
> -Lcbc_done:
> - addi $out,$out,-1
> - lvx $inout,0,$out # redundant in aligned case
> - vsel $inout,$outhead,$inout,$outmask
> - stvx $inout,0,$out
> -
> - neg $enc,$ivp # write [unaligned] iv
> - li $idx,15 # 15 is not typo
> - vxor $rndkey0,$rndkey0,$rndkey0
> - vspltisb $outmask,-1
> - le?vspltisb $tmp,0x0f
> - ?lvsl $outperm,0,$enc
> - ?vperm $outmask,$rndkey0,$outmask,$outperm
> - le?vxor $outperm,$outperm,$tmp
> - lvx $outhead,0,$ivp
> - vperm $ivec,$ivec,$ivec,$outperm
> - vsel $inout,$outhead,$ivec,$outmask
> - lvx $inptail,$idx,$ivp
> - stvx $inout,0,$ivp
> - vsel $inout,$ivec,$inptail,$outmask
> - stvx $inout,$idx,$ivp
> -
> - mtspr 256,$vrsave
> - blr
> - .long 0
> - .byte 0,12,0x14,0,0,0,6,0
> - .long 0
> -___
> -#########################################################################
> -{{ # Optimized CBC decrypt procedure #
> -my $key_="r11";
> -my ($x00,$x10,$x20,$x30,$x40,$x50,$x60,$x70)=map("r$_",(0,8,26..31));
> -my ($in0, $in1, $in2, $in3, $in4, $in5, $in6, $in7 )=map("v$_",(0..3,10..13));
> -my ($out0,$out1,$out2,$out3,$out4,$out5,$out6,$out7)=map("v$_",(14..21));
> -my $rndkey0="v23"; # v24-v25 rotating buffer for first found keys
> - # v26-v31 last 6 round keys
> -my ($tmp,$keyperm)=($in3,$in4); # aliases with "caller", redundant assignment
> -
> -$code.=<<___;
> -.align 5
> -_aesp8_cbc_decrypt8x:
> - $STU $sp,-`($FRAME+21*16+6*$SIZE_T)`($sp)
> - li r10,`$FRAME+8*16+15`
> - li r11,`$FRAME+8*16+31`
> - stvx v20,r10,$sp # ABI says so
> - addi r10,r10,32
> - stvx v21,r11,$sp
> - addi r11,r11,32
> - stvx v22,r10,$sp
> - addi r10,r10,32
> - stvx v23,r11,$sp
> - addi r11,r11,32
> - stvx v24,r10,$sp
> - addi r10,r10,32
> - stvx v25,r11,$sp
> - addi r11,r11,32
> - stvx v26,r10,$sp
> - addi r10,r10,32
> - stvx v27,r11,$sp
> - addi r11,r11,32
> - stvx v28,r10,$sp
> - addi r10,r10,32
> - stvx v29,r11,$sp
> - addi r11,r11,32
> - stvx v30,r10,$sp
> - stvx v31,r11,$sp
> - li r0,-1
> - stw $vrsave,`$FRAME+21*16-4`($sp) # save vrsave
> - li $x10,0x10
> - $PUSH r26,`$FRAME+21*16+0*$SIZE_T`($sp)
> - li $x20,0x20
> - $PUSH r27,`$FRAME+21*16+1*$SIZE_T`($sp)
> - li $x30,0x30
> - $PUSH r28,`$FRAME+21*16+2*$SIZE_T`($sp)
> - li $x40,0x40
> - $PUSH r29,`$FRAME+21*16+3*$SIZE_T`($sp)
> - li $x50,0x50
> - $PUSH r30,`$FRAME+21*16+4*$SIZE_T`($sp)
> - li $x60,0x60
> - $PUSH r31,`$FRAME+21*16+5*$SIZE_T`($sp)
> - li $x70,0x70
> - mtspr 256,r0
> -
> - subi $rounds,$rounds,3 # -4 in total
> - subi $len,$len,128 # bias
> -
> - lvx $rndkey0,$x00,$key # load key schedule
> - lvx v30,$x10,$key
> - addi $key,$key,0x20
> - lvx v31,$x00,$key
> - ?vperm $rndkey0,$rndkey0,v30,$keyperm
> - addi $key_,$sp,$FRAME+15
> - mtctr $rounds
> -
> -Load_cbc_dec_key:
> - ?vperm v24,v30,v31,$keyperm
> - lvx v30,$x10,$key
> - addi $key,$key,0x20
> - stvx v24,$x00,$key_ # off-load round[1]
> - ?vperm v25,v31,v30,$keyperm
> - lvx v31,$x00,$key
> - stvx v25,$x10,$key_ # off-load round[2]
> - addi $key_,$key_,0x20
> - bdnz Load_cbc_dec_key
> -
> - lvx v26,$x10,$key
> - ?vperm v24,v30,v31,$keyperm
> - lvx v27,$x20,$key
> - stvx v24,$x00,$key_ # off-load round[3]
> - ?vperm v25,v31,v26,$keyperm
> - lvx v28,$x30,$key
> - stvx v25,$x10,$key_ # off-load round[4]
> - addi $key_,$sp,$FRAME+15 # rewind $key_
> - ?vperm v26,v26,v27,$keyperm
> - lvx v29,$x40,$key
> - ?vperm v27,v27,v28,$keyperm
> - lvx v30,$x50,$key
> - ?vperm v28,v28,v29,$keyperm
> - lvx v31,$x60,$key
> - ?vperm v29,v29,v30,$keyperm
> - lvx $out0,$x70,$key # borrow $out0
> - ?vperm v30,v30,v31,$keyperm
> - lvx v24,$x00,$key_ # pre-load round[1]
> - ?vperm v31,v31,$out0,$keyperm
> - lvx v25,$x10,$key_ # pre-load round[2]
> -
> - #lvx $inptail,0,$inp # "caller" already did this
> - #addi $inp,$inp,15 # 15 is not typo
> - subi $inp,$inp,15 # undo "caller"
> -
> - le?li $idx,8
> - lvx_u $in0,$x00,$inp # load first 8 "words"
> - le?lvsl $inpperm,0,$idx
> - le?vspltisb $tmp,0x0f
> - lvx_u $in1,$x10,$inp
> - le?vxor $inpperm,$inpperm,$tmp # transform for lvx_u/stvx_u
> - lvx_u $in2,$x20,$inp
> - le?vperm $in0,$in0,$in0,$inpperm
> - lvx_u $in3,$x30,$inp
> - le?vperm $in1,$in1,$in1,$inpperm
> - lvx_u $in4,$x40,$inp
> - le?vperm $in2,$in2,$in2,$inpperm
> - vxor $out0,$in0,$rndkey0
> - lvx_u $in5,$x50,$inp
> - le?vperm $in3,$in3,$in3,$inpperm
> - vxor $out1,$in1,$rndkey0
> - lvx_u $in6,$x60,$inp
> - le?vperm $in4,$in4,$in4,$inpperm
> - vxor $out2,$in2,$rndkey0
> - lvx_u $in7,$x70,$inp
> - addi $inp,$inp,0x80
> - le?vperm $in5,$in5,$in5,$inpperm
> - vxor $out3,$in3,$rndkey0
> - le?vperm $in6,$in6,$in6,$inpperm
> - vxor $out4,$in4,$rndkey0
> - le?vperm $in7,$in7,$in7,$inpperm
> - vxor $out5,$in5,$rndkey0
> - vxor $out6,$in6,$rndkey0
> - vxor $out7,$in7,$rndkey0
> -
> - mtctr $rounds
> - b Loop_cbc_dec8x
> -.align 5
> -Loop_cbc_dec8x:
> - vncipher $out0,$out0,v24
> - vncipher $out1,$out1,v24
> - vncipher $out2,$out2,v24
> - vncipher $out3,$out3,v24
> - vncipher $out4,$out4,v24
> - vncipher $out5,$out5,v24
> - vncipher $out6,$out6,v24
> - vncipher $out7,$out7,v24
> - lvx v24,$x20,$key_ # round[3]
> - addi $key_,$key_,0x20
> -
> - vncipher $out0,$out0,v25
> - vncipher $out1,$out1,v25
> - vncipher $out2,$out2,v25
> - vncipher $out3,$out3,v25
> - vncipher $out4,$out4,v25
> - vncipher $out5,$out5,v25
> - vncipher $out6,$out6,v25
> - vncipher $out7,$out7,v25
> - lvx v25,$x10,$key_ # round[4]
> - bdnz Loop_cbc_dec8x
> -
> - subic $len,$len,128 # $len-=128
> - vncipher $out0,$out0,v24
> - vncipher $out1,$out1,v24
> - vncipher $out2,$out2,v24
> - vncipher $out3,$out3,v24
> - vncipher $out4,$out4,v24
> - vncipher $out5,$out5,v24
> - vncipher $out6,$out6,v24
> - vncipher $out7,$out7,v24
> -
> - subfe. r0,r0,r0 # borrow?-1:0
> - vncipher $out0,$out0,v25
> - vncipher $out1,$out1,v25
> - vncipher $out2,$out2,v25
> - vncipher $out3,$out3,v25
> - vncipher $out4,$out4,v25
> - vncipher $out5,$out5,v25
> - vncipher $out6,$out6,v25
> - vncipher $out7,$out7,v25
> -
> - and r0,r0,$len
> - vncipher $out0,$out0,v26
> - vncipher $out1,$out1,v26
> - vncipher $out2,$out2,v26
> - vncipher $out3,$out3,v26
> - vncipher $out4,$out4,v26
> - vncipher $out5,$out5,v26
> - vncipher $out6,$out6,v26
> - vncipher $out7,$out7,v26
> -
> - add $inp,$inp,r0 # $inp is adjusted in such
> - # way that at exit from the
> - # loop inX-in7 are loaded
> - # with last "words"
> - vncipher $out0,$out0,v27
> - vncipher $out1,$out1,v27
> - vncipher $out2,$out2,v27
> - vncipher $out3,$out3,v27
> - vncipher $out4,$out4,v27
> - vncipher $out5,$out5,v27
> - vncipher $out6,$out6,v27
> - vncipher $out7,$out7,v27
> -
> - addi $key_,$sp,$FRAME+15 # rewind $key_
> - vncipher $out0,$out0,v28
> - vncipher $out1,$out1,v28
> - vncipher $out2,$out2,v28
> - vncipher $out3,$out3,v28
> - vncipher $out4,$out4,v28
> - vncipher $out5,$out5,v28
> - vncipher $out6,$out6,v28
> - vncipher $out7,$out7,v28
> - lvx v24,$x00,$key_ # re-pre-load round[1]
> -
> - vncipher $out0,$out0,v29
> - vncipher $out1,$out1,v29
> - vncipher $out2,$out2,v29
> - vncipher $out3,$out3,v29
> - vncipher $out4,$out4,v29
> - vncipher $out5,$out5,v29
> - vncipher $out6,$out6,v29
> - vncipher $out7,$out7,v29
> - lvx v25,$x10,$key_ # re-pre-load round[2]
> -
> - vncipher $out0,$out0,v30
> - vxor $ivec,$ivec,v31 # xor with last round key
> - vncipher $out1,$out1,v30
> - vxor $in0,$in0,v31
> - vncipher $out2,$out2,v30
> - vxor $in1,$in1,v31
> - vncipher $out3,$out3,v30
> - vxor $in2,$in2,v31
> - vncipher $out4,$out4,v30
> - vxor $in3,$in3,v31
> - vncipher $out5,$out5,v30
> - vxor $in4,$in4,v31
> - vncipher $out6,$out6,v30
> - vxor $in5,$in5,v31
> - vncipher $out7,$out7,v30
> - vxor $in6,$in6,v31
> -
> - vncipherlast $out0,$out0,$ivec
> - vncipherlast $out1,$out1,$in0
> - lvx_u $in0,$x00,$inp # load next input block
> - vncipherlast $out2,$out2,$in1
> - lvx_u $in1,$x10,$inp
> - vncipherlast $out3,$out3,$in2
> - le?vperm $in0,$in0,$in0,$inpperm
> - lvx_u $in2,$x20,$inp
> - vncipherlast $out4,$out4,$in3
> - le?vperm $in1,$in1,$in1,$inpperm
> - lvx_u $in3,$x30,$inp
> - vncipherlast $out5,$out5,$in4
> - le?vperm $in2,$in2,$in2,$inpperm
> - lvx_u $in4,$x40,$inp
> - vncipherlast $out6,$out6,$in5
> - le?vperm $in3,$in3,$in3,$inpperm
> - lvx_u $in5,$x50,$inp
> - vncipherlast $out7,$out7,$in6
> - le?vperm $in4,$in4,$in4,$inpperm
> - lvx_u $in6,$x60,$inp
> - vmr $ivec,$in7
> - le?vperm $in5,$in5,$in5,$inpperm
> - lvx_u $in7,$x70,$inp
> - addi $inp,$inp,0x80
> -
> - le?vperm $out0,$out0,$out0,$inpperm
> - le?vperm $out1,$out1,$out1,$inpperm
> - stvx_u $out0,$x00,$out
> - le?vperm $in6,$in6,$in6,$inpperm
> - vxor $out0,$in0,$rndkey0
> - le?vperm $out2,$out2,$out2,$inpperm
> - stvx_u $out1,$x10,$out
> - le?vperm $in7,$in7,$in7,$inpperm
> - vxor $out1,$in1,$rndkey0
> - le?vperm $out3,$out3,$out3,$inpperm
> - stvx_u $out2,$x20,$out
> - vxor $out2,$in2,$rndkey0
> - le?vperm $out4,$out4,$out4,$inpperm
> - stvx_u $out3,$x30,$out
> - vxor $out3,$in3,$rndkey0
> - le?vperm $out5,$out5,$out5,$inpperm
> - stvx_u $out4,$x40,$out
> - vxor $out4,$in4,$rndkey0
> - le?vperm $out6,$out6,$out6,$inpperm
> - stvx_u $out5,$x50,$out
> - vxor $out5,$in5,$rndkey0
> - le?vperm $out7,$out7,$out7,$inpperm
> - stvx_u $out6,$x60,$out
> - vxor $out6,$in6,$rndkey0
> - stvx_u $out7,$x70,$out
> - addi $out,$out,0x80
> - vxor $out7,$in7,$rndkey0
> -
> - mtctr $rounds
> - beq Loop_cbc_dec8x # did $len-=128 borrow?
> -
> - addic. $len,$len,128
> - beq Lcbc_dec8x_done
> - nop
> - nop
> -
> -Loop_cbc_dec8x_tail: # up to 7 "words" tail...
> - vncipher $out1,$out1,v24
> - vncipher $out2,$out2,v24
> - vncipher $out3,$out3,v24
> - vncipher $out4,$out4,v24
> - vncipher $out5,$out5,v24
> - vncipher $out6,$out6,v24
> - vncipher $out7,$out7,v24
> - lvx v24,$x20,$key_ # round[3]
> - addi $key_,$key_,0x20
> -
> - vncipher $out1,$out1,v25
> - vncipher $out2,$out2,v25
> - vncipher $out3,$out3,v25
> - vncipher $out4,$out4,v25
> - vncipher $out5,$out5,v25
> - vncipher $out6,$out6,v25
> - vncipher $out7,$out7,v25
> - lvx v25,$x10,$key_ # round[4]
> - bdnz Loop_cbc_dec8x_tail
> -
> - vncipher $out1,$out1,v24
> - vncipher $out2,$out2,v24
> - vncipher $out3,$out3,v24
> - vncipher $out4,$out4,v24
> - vncipher $out5,$out5,v24
> - vncipher $out6,$out6,v24
> - vncipher $out7,$out7,v24
> -
> - vncipher $out1,$out1,v25
> - vncipher $out2,$out2,v25
> - vncipher $out3,$out3,v25
> - vncipher $out4,$out4,v25
> - vncipher $out5,$out5,v25
> - vncipher $out6,$out6,v25
> - vncipher $out7,$out7,v25
> -
> - vncipher $out1,$out1,v26
> - vncipher $out2,$out2,v26
> - vncipher $out3,$out3,v26
> - vncipher $out4,$out4,v26
> - vncipher $out5,$out5,v26
> - vncipher $out6,$out6,v26
> - vncipher $out7,$out7,v26
> -
> - vncipher $out1,$out1,v27
> - vncipher $out2,$out2,v27
> - vncipher $out3,$out3,v27
> - vncipher $out4,$out4,v27
> - vncipher $out5,$out5,v27
> - vncipher $out6,$out6,v27
> - vncipher $out7,$out7,v27
> -
> - vncipher $out1,$out1,v28
> - vncipher $out2,$out2,v28
> - vncipher $out3,$out3,v28
> - vncipher $out4,$out4,v28
> - vncipher $out5,$out5,v28
> - vncipher $out6,$out6,v28
> - vncipher $out7,$out7,v28
> -
> - vncipher $out1,$out1,v29
> - vncipher $out2,$out2,v29
> - vncipher $out3,$out3,v29
> - vncipher $out4,$out4,v29
> - vncipher $out5,$out5,v29
> - vncipher $out6,$out6,v29
> - vncipher $out7,$out7,v29
> -
> - vncipher $out1,$out1,v30
> - vxor $ivec,$ivec,v31 # last round key
> - vncipher $out2,$out2,v30
> - vxor $in1,$in1,v31
> - vncipher $out3,$out3,v30
> - vxor $in2,$in2,v31
> - vncipher $out4,$out4,v30
> - vxor $in3,$in3,v31
> - vncipher $out5,$out5,v30
> - vxor $in4,$in4,v31
> - vncipher $out6,$out6,v30
> - vxor $in5,$in5,v31
> - vncipher $out7,$out7,v30
> - vxor $in6,$in6,v31
> -
> - cmplwi $len,32 # switch($len)
> - blt Lcbc_dec8x_one
> - nop
> - beq Lcbc_dec8x_two
> - cmplwi $len,64
> - blt Lcbc_dec8x_three
> - nop
> - beq Lcbc_dec8x_four
> - cmplwi $len,96
> - blt Lcbc_dec8x_five
> - nop
> - beq Lcbc_dec8x_six
> -
> -Lcbc_dec8x_seven:
> - vncipherlast $out1,$out1,$ivec
> - vncipherlast $out2,$out2,$in1
> - vncipherlast $out3,$out3,$in2
> - vncipherlast $out4,$out4,$in3
> - vncipherlast $out5,$out5,$in4
> - vncipherlast $out6,$out6,$in5
> - vncipherlast $out7,$out7,$in6
> - vmr $ivec,$in7
> -
> - le?vperm $out1,$out1,$out1,$inpperm
> - le?vperm $out2,$out2,$out2,$inpperm
> - stvx_u $out1,$x00,$out
> - le?vperm $out3,$out3,$out3,$inpperm
> - stvx_u $out2,$x10,$out
> - le?vperm $out4,$out4,$out4,$inpperm
> - stvx_u $out3,$x20,$out
> - le?vperm $out5,$out5,$out5,$inpperm
> - stvx_u $out4,$x30,$out
> - le?vperm $out6,$out6,$out6,$inpperm
> - stvx_u $out5,$x40,$out
> - le?vperm $out7,$out7,$out7,$inpperm
> - stvx_u $out6,$x50,$out
> - stvx_u $out7,$x60,$out
> - addi $out,$out,0x70
> - b Lcbc_dec8x_done
> -
> -.align 5
> -Lcbc_dec8x_six:
> - vncipherlast $out2,$out2,$ivec
> - vncipherlast $out3,$out3,$in2
> - vncipherlast $out4,$out4,$in3
> - vncipherlast $out5,$out5,$in4
> - vncipherlast $out6,$out6,$in5
> - vncipherlast $out7,$out7,$in6
> - vmr $ivec,$in7
> -
> - le?vperm $out2,$out2,$out2,$inpperm
> - le?vperm $out3,$out3,$out3,$inpperm
> - stvx_u $out2,$x00,$out
> - le?vperm $out4,$out4,$out4,$inpperm
> - stvx_u $out3,$x10,$out
> - le?vperm $out5,$out5,$out5,$inpperm
> - stvx_u $out4,$x20,$out
> - le?vperm $out6,$out6,$out6,$inpperm
> - stvx_u $out5,$x30,$out
> - le?vperm $out7,$out7,$out7,$inpperm
> - stvx_u $out6,$x40,$out
> - stvx_u $out7,$x50,$out
> - addi $out,$out,0x60
> - b Lcbc_dec8x_done
> -
> -.align 5
> -Lcbc_dec8x_five:
> - vncipherlast $out3,$out3,$ivec
> - vncipherlast $out4,$out4,$in3
> - vncipherlast $out5,$out5,$in4
> - vncipherlast $out6,$out6,$in5
> - vncipherlast $out7,$out7,$in6
> - vmr $ivec,$in7
> -
> - le?vperm $out3,$out3,$out3,$inpperm
> - le?vperm $out4,$out4,$out4,$inpperm
> - stvx_u $out3,$x00,$out
> - le?vperm $out5,$out5,$out5,$inpperm
> - stvx_u $out4,$x10,$out
> - le?vperm $out6,$out6,$out6,$inpperm
> - stvx_u $out5,$x20,$out
> - le?vperm $out7,$out7,$out7,$inpperm
> - stvx_u $out6,$x30,$out
> - stvx_u $out7,$x40,$out
> - addi $out,$out,0x50
> - b Lcbc_dec8x_done
> -
> -.align 5
> -Lcbc_dec8x_four:
> - vncipherlast $out4,$out4,$ivec
> - vncipherlast $out5,$out5,$in4
> - vncipherlast $out6,$out6,$in5
> - vncipherlast $out7,$out7,$in6
> - vmr $ivec,$in7
> -
> - le?vperm $out4,$out4,$out4,$inpperm
> - le?vperm $out5,$out5,$out5,$inpperm
> - stvx_u $out4,$x00,$out
> - le?vperm $out6,$out6,$out6,$inpperm
> - stvx_u $out5,$x10,$out
> - le?vperm $out7,$out7,$out7,$inpperm
> - stvx_u $out6,$x20,$out
> - stvx_u $out7,$x30,$out
> - addi $out,$out,0x40
> - b Lcbc_dec8x_done
> -
> -.align 5
> -Lcbc_dec8x_three:
> - vncipherlast $out5,$out5,$ivec
> - vncipherlast $out6,$out6,$in5
> - vncipherlast $out7,$out7,$in6
> - vmr $ivec,$in7
> -
> - le?vperm $out5,$out5,$out5,$inpperm
> - le?vperm $out6,$out6,$out6,$inpperm
> - stvx_u $out5,$x00,$out
> - le?vperm $out7,$out7,$out7,$inpperm
> - stvx_u $out6,$x10,$out
> - stvx_u $out7,$x20,$out
> - addi $out,$out,0x30
> - b Lcbc_dec8x_done
> -
> -.align 5
> -Lcbc_dec8x_two:
> - vncipherlast $out6,$out6,$ivec
> - vncipherlast $out7,$out7,$in6
> - vmr $ivec,$in7
> -
> - le?vperm $out6,$out6,$out6,$inpperm
> - le?vperm $out7,$out7,$out7,$inpperm
> - stvx_u $out6,$x00,$out
> - stvx_u $out7,$x10,$out
> - addi $out,$out,0x20
> - b Lcbc_dec8x_done
> -
> -.align 5
> -Lcbc_dec8x_one:
> - vncipherlast $out7,$out7,$ivec
> - vmr $ivec,$in7
> -
> - le?vperm $out7,$out7,$out7,$inpperm
> - stvx_u $out7,0,$out
> - addi $out,$out,0x10
> -
> -Lcbc_dec8x_done:
> - le?vperm $ivec,$ivec,$ivec,$inpperm
> - stvx_u $ivec,0,$ivp # write [unaligned] iv
> -
> - li r10,`$FRAME+15`
> - li r11,`$FRAME+31`
> - stvx $inpperm,r10,$sp # wipe copies of round keys
> - addi r10,r10,32
> - stvx $inpperm,r11,$sp
> - addi r11,r11,32
> - stvx $inpperm,r10,$sp
> - addi r10,r10,32
> - stvx $inpperm,r11,$sp
> - addi r11,r11,32
> - stvx $inpperm,r10,$sp
> - addi r10,r10,32
> - stvx $inpperm,r11,$sp
> - addi r11,r11,32
> - stvx $inpperm,r10,$sp
> - addi r10,r10,32
> - stvx $inpperm,r11,$sp
> - addi r11,r11,32
> -
> - mtspr 256,$vrsave
> - lvx v20,r10,$sp # ABI says so
> - addi r10,r10,32
> - lvx v21,r11,$sp
> - addi r11,r11,32
> - lvx v22,r10,$sp
> - addi r10,r10,32
> - lvx v23,r11,$sp
> - addi r11,r11,32
> - lvx v24,r10,$sp
> - addi r10,r10,32
> - lvx v25,r11,$sp
> - addi r11,r11,32
> - lvx v26,r10,$sp
> - addi r10,r10,32
> - lvx v27,r11,$sp
> - addi r11,r11,32
> - lvx v28,r10,$sp
> - addi r10,r10,32
> - lvx v29,r11,$sp
> - addi r11,r11,32
> - lvx v30,r10,$sp
> - lvx v31,r11,$sp
> - $POP r26,`$FRAME+21*16+0*$SIZE_T`($sp)
> - $POP r27,`$FRAME+21*16+1*$SIZE_T`($sp)
> - $POP r28,`$FRAME+21*16+2*$SIZE_T`($sp)
> - $POP r29,`$FRAME+21*16+3*$SIZE_T`($sp)
> - $POP r30,`$FRAME+21*16+4*$SIZE_T`($sp)
> - $POP r31,`$FRAME+21*16+5*$SIZE_T`($sp)
> - addi $sp,$sp,`$FRAME+21*16+6*$SIZE_T`
> - blr
> - .long 0
> - .byte 0,12,0x14,0,0x80,6,6,0
> - .long 0
> -.size .${prefix}_cbc_encrypt,.-.${prefix}_cbc_encrypt
> -___
> -}} }}}
> -
> -#########################################################################
> -{{{ # CTR procedure[s] #
> -my ($inp,$out,$len,$key,$ivp,$x10,$rounds,$idx)=map("r$_",(3..10));
> -my ($rndkey0,$rndkey1,$inout,$tmp)= map("v$_",(0..3));
> -my ($ivec,$inptail,$inpperm,$outhead,$outperm,$outmask,$keyperm,$one)=
> - map("v$_",(4..11));
> -my $dat=$tmp;
> -
> -$code.=<<___;
> -.globl .${prefix}_ctr32_encrypt_blocks
> - ${UCMP}i $len,1
> - bltlr-
> -
> - lis r0,0xfff0
> - mfspr $vrsave,256
> - mtspr 256,r0
> -
> - li $idx,15
> - vxor $rndkey0,$rndkey0,$rndkey0
> - le?vspltisb $tmp,0x0f
> -
> - lvx $ivec,0,$ivp # load [unaligned] iv
> - lvsl $inpperm,0,$ivp
> - lvx $inptail,$idx,$ivp
> - vspltisb $one,1
> - le?vxor $inpperm,$inpperm,$tmp
> - vperm $ivec,$ivec,$inptail,$inpperm
> - vsldoi $one,$rndkey0,$one,1
> -
> - neg r11,$inp
> - ?lvsl $keyperm,0,$key # prepare for unaligned key
> - lwz $rounds,240($key)
> -
> - lvsr $inpperm,0,r11 # prepare for unaligned load
> - lvx $inptail,0,$inp
> - addi $inp,$inp,15 # 15 is not typo
> - le?vxor $inpperm,$inpperm,$tmp
> -
> - srwi $rounds,$rounds,1
> - li $idx,16
> - subi $rounds,$rounds,1
> -
> - ${UCMP}i $len,8
> - bge _aesp8_ctr32_encrypt8x
> -
> - ?lvsr $outperm,0,$out # prepare for unaligned store
> - vspltisb $outmask,-1
> - lvx $outhead,0,$out
> - ?vperm $outmask,$rndkey0,$outmask,$outperm
> - le?vxor $outperm,$outperm,$tmp
> -
> - lvx $rndkey0,0,$key
> - mtctr $rounds
> - lvx $rndkey1,$idx,$key
> - addi $idx,$idx,16
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vxor $inout,$ivec,$rndkey0
> - lvx $rndkey0,$idx,$key
> - addi $idx,$idx,16
> - b Loop_ctr32_enc
> -
> -.align 5
> -Loop_ctr32_enc:
> - ?vperm $rndkey1,$rndkey1,$rndkey0,$keyperm
> - vcipher $inout,$inout,$rndkey1
> - lvx $rndkey1,$idx,$key
> - addi $idx,$idx,16
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vcipher $inout,$inout,$rndkey0
> - lvx $rndkey0,$idx,$key
> - addi $idx,$idx,16
> - bdnz Loop_ctr32_enc
> -
> - vadduwm $ivec,$ivec,$one
> - vmr $dat,$inptail
> - lvx $inptail,0,$inp
> - addi $inp,$inp,16
> - subic. $len,$len,1 # blocks--
> -
> - ?vperm $rndkey1,$rndkey1,$rndkey0,$keyperm
> - vcipher $inout,$inout,$rndkey1
> - lvx $rndkey1,$idx,$key
> - vperm $dat,$dat,$inptail,$inpperm
> - li $idx,16
> - ?vperm $rndkey1,$rndkey0,$rndkey1,$keyperm
> - lvx $rndkey0,0,$key
> - vxor $dat,$dat,$rndkey1 # last round key
> - vcipherlast $inout,$inout,$dat
> -
> - lvx $rndkey1,$idx,$key
> - addi $idx,$idx,16
> - vperm $inout,$inout,$inout,$outperm
> - vsel $dat,$outhead,$inout,$outmask
> - mtctr $rounds
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vmr $outhead,$inout
> - vxor $inout,$ivec,$rndkey0
> - lvx $rndkey0,$idx,$key
> - addi $idx,$idx,16
> - stvx $dat,0,$out
> - addi $out,$out,16
> - bne Loop_ctr32_enc
> -
> - addi $out,$out,-1
> - lvx $inout,0,$out # redundant in aligned case
> - vsel $inout,$outhead,$inout,$outmask
> - stvx $inout,0,$out
> -
> - mtspr 256,$vrsave
> - blr
> - .long 0
> - .byte 0,12,0x14,0,0,0,6,0
> - .long 0
> -___
> -#########################################################################
> -{{ # Optimized CTR procedure #
> -my $key_="r11";
> -my ($x00,$x10,$x20,$x30,$x40,$x50,$x60,$x70)=map("r$_",(0,8,26..31));
> -my ($in0, $in1, $in2, $in3, $in4, $in5, $in6, $in7 )=map("v$_",(0..3,10,12..14));
> -my ($out0,$out1,$out2,$out3,$out4,$out5,$out6,$out7)=map("v$_",(15..22));
> -my $rndkey0="v23"; # v24-v25 rotating buffer for first found keys
> - # v26-v31 last 6 round keys
> -my ($tmp,$keyperm)=($in3,$in4); # aliases with "caller", redundant assignment
> -my ($two,$three,$four)=($outhead,$outperm,$outmask);
> -
> -$code.=<<___;
> -.align 5
> -_aesp8_ctr32_encrypt8x:
> - $STU $sp,-`($FRAME+21*16+6*$SIZE_T)`($sp)
> - li r10,`$FRAME+8*16+15`
> - li r11,`$FRAME+8*16+31`
> - stvx v20,r10,$sp # ABI says so
> - addi r10,r10,32
> - stvx v21,r11,$sp
> - addi r11,r11,32
> - stvx v22,r10,$sp
> - addi r10,r10,32
> - stvx v23,r11,$sp
> - addi r11,r11,32
> - stvx v24,r10,$sp
> - addi r10,r10,32
> - stvx v25,r11,$sp
> - addi r11,r11,32
> - stvx v26,r10,$sp
> - addi r10,r10,32
> - stvx v27,r11,$sp
> - addi r11,r11,32
> - stvx v28,r10,$sp
> - addi r10,r10,32
> - stvx v29,r11,$sp
> - addi r11,r11,32
> - stvx v30,r10,$sp
> - stvx v31,r11,$sp
> - li r0,-1
> - stw $vrsave,`$FRAME+21*16-4`($sp) # save vrsave
> - li $x10,0x10
> - $PUSH r26,`$FRAME+21*16+0*$SIZE_T`($sp)
> - li $x20,0x20
> - $PUSH r27,`$FRAME+21*16+1*$SIZE_T`($sp)
> - li $x30,0x30
> - $PUSH r28,`$FRAME+21*16+2*$SIZE_T`($sp)
> - li $x40,0x40
> - $PUSH r29,`$FRAME+21*16+3*$SIZE_T`($sp)
> - li $x50,0x50
> - $PUSH r30,`$FRAME+21*16+4*$SIZE_T`($sp)
> - li $x60,0x60
> - $PUSH r31,`$FRAME+21*16+5*$SIZE_T`($sp)
> - li $x70,0x70
> - mtspr 256,r0
> -
> - subi $rounds,$rounds,3 # -4 in total
> -
> - lvx $rndkey0,$x00,$key # load key schedule
> - lvx v30,$x10,$key
> - addi $key,$key,0x20
> - lvx v31,$x00,$key
> - ?vperm $rndkey0,$rndkey0,v30,$keyperm
> - addi $key_,$sp,$FRAME+15
> - mtctr $rounds
> -
> -Load_ctr32_enc_key:
> - ?vperm v24,v30,v31,$keyperm
> - lvx v30,$x10,$key
> - addi $key,$key,0x20
> - stvx v24,$x00,$key_ # off-load round[1]
> - ?vperm v25,v31,v30,$keyperm
> - lvx v31,$x00,$key
> - stvx v25,$x10,$key_ # off-load round[2]
> - addi $key_,$key_,0x20
> - bdnz Load_ctr32_enc_key
> -
> - lvx v26,$x10,$key
> - ?vperm v24,v30,v31,$keyperm
> - lvx v27,$x20,$key
> - stvx v24,$x00,$key_ # off-load round[3]
> - ?vperm v25,v31,v26,$keyperm
> - lvx v28,$x30,$key
> - stvx v25,$x10,$key_ # off-load round[4]
> - addi $key_,$sp,$FRAME+15 # rewind $key_
> - ?vperm v26,v26,v27,$keyperm
> - lvx v29,$x40,$key
> - ?vperm v27,v27,v28,$keyperm
> - lvx v30,$x50,$key
> - ?vperm v28,v28,v29,$keyperm
> - lvx v31,$x60,$key
> - ?vperm v29,v29,v30,$keyperm
> - lvx $out0,$x70,$key # borrow $out0
> - ?vperm v30,v30,v31,$keyperm
> - lvx v24,$x00,$key_ # pre-load round[1]
> - ?vperm v31,v31,$out0,$keyperm
> - lvx v25,$x10,$key_ # pre-load round[2]
> -
> - vadduqm $two,$one,$one
> - subi $inp,$inp,15 # undo "caller"
> - $SHL $len,$len,4
> -
> - vadduqm $out1,$ivec,$one # counter values ...
> - vadduqm $out2,$ivec,$two
> - vxor $out0,$ivec,$rndkey0 # ... xored with rndkey[0]
> - le?li $idx,8
> - vadduqm $out3,$out1,$two
> - vxor $out1,$out1,$rndkey0
> - le?lvsl $inpperm,0,$idx
> - vadduqm $out4,$out2,$two
> - vxor $out2,$out2,$rndkey0
> - le?vspltisb $tmp,0x0f
> - vadduqm $out5,$out3,$two
> - vxor $out3,$out3,$rndkey0
> - le?vxor $inpperm,$inpperm,$tmp # transform for lvx_u/stvx_u
> - vadduqm $out6,$out4,$two
> - vxor $out4,$out4,$rndkey0
> - vadduqm $out7,$out5,$two
> - vxor $out5,$out5,$rndkey0
> - vadduqm $ivec,$out6,$two # next counter value
> - vxor $out6,$out6,$rndkey0
> - vxor $out7,$out7,$rndkey0
> -
> - mtctr $rounds
> - b Loop_ctr32_enc8x
> -.align 5
> -Loop_ctr32_enc8x:
> - vcipher $out0,$out0,v24
> - vcipher $out1,$out1,v24
> - vcipher $out2,$out2,v24
> - vcipher $out3,$out3,v24
> - vcipher $out4,$out4,v24
> - vcipher $out5,$out5,v24
> - vcipher $out6,$out6,v24
> - vcipher $out7,$out7,v24
> -Loop_ctr32_enc8x_middle:
> - lvx v24,$x20,$key_ # round[3]
> - addi $key_,$key_,0x20
> -
> - vcipher $out0,$out0,v25
> - vcipher $out1,$out1,v25
> - vcipher $out2,$out2,v25
> - vcipher $out3,$out3,v25
> - vcipher $out4,$out4,v25
> - vcipher $out5,$out5,v25
> - vcipher $out6,$out6,v25
> - vcipher $out7,$out7,v25
> - lvx v25,$x10,$key_ # round[4]
> - bdnz Loop_ctr32_enc8x
> -
> - subic r11,$len,256 # $len-256, borrow $key_
> - vcipher $out0,$out0,v24
> - vcipher $out1,$out1,v24
> - vcipher $out2,$out2,v24
> - vcipher $out3,$out3,v24
> - vcipher $out4,$out4,v24
> - vcipher $out5,$out5,v24
> - vcipher $out6,$out6,v24
> - vcipher $out7,$out7,v24
> -
> - subfe r0,r0,r0 # borrow?-1:0
> - vcipher $out0,$out0,v25
> - vcipher $out1,$out1,v25
> - vcipher $out2,$out2,v25
> - vcipher $out3,$out3,v25
> - vcipher $out4,$out4,v25
> - vcipher $out5,$out5,v25
> - vcipher $out6,$out6,v25
> - vcipher $out7,$out7,v25
> -
> - and r0,r0,r11
> - addi $key_,$sp,$FRAME+15 # rewind $key_
> - vcipher $out0,$out0,v26
> - vcipher $out1,$out1,v26
> - vcipher $out2,$out2,v26
> - vcipher $out3,$out3,v26
> - vcipher $out4,$out4,v26
> - vcipher $out5,$out5,v26
> - vcipher $out6,$out6,v26
> - vcipher $out7,$out7,v26
> - lvx v24,$x00,$key_ # re-pre-load round[1]
> -
> - subic $len,$len,129 # $len-=129
> - vcipher $out0,$out0,v27
> - addi $len,$len,1 # $len-=128 really
> - vcipher $out1,$out1,v27
> - vcipher $out2,$out2,v27
> - vcipher $out3,$out3,v27
> - vcipher $out4,$out4,v27
> - vcipher $out5,$out5,v27
> - vcipher $out6,$out6,v27
> - vcipher $out7,$out7,v27
> - lvx v25,$x10,$key_ # re-pre-load round[2]
> -
> - vcipher $out0,$out0,v28
> - lvx_u $in0,$x00,$inp # load input
> - vcipher $out1,$out1,v28
> - lvx_u $in1,$x10,$inp
> - vcipher $out2,$out2,v28
> - lvx_u $in2,$x20,$inp
> - vcipher $out3,$out3,v28
> - lvx_u $in3,$x30,$inp
> - vcipher $out4,$out4,v28
> - lvx_u $in4,$x40,$inp
> - vcipher $out5,$out5,v28
> - lvx_u $in5,$x50,$inp
> - vcipher $out6,$out6,v28
> - lvx_u $in6,$x60,$inp
> - vcipher $out7,$out7,v28
> - lvx_u $in7,$x70,$inp
> - addi $inp,$inp,0x80
> -
> - vcipher $out0,$out0,v29
> - le?vperm $in0,$in0,$in0,$inpperm
> - vcipher $out1,$out1,v29
> - le?vperm $in1,$in1,$in1,$inpperm
> - vcipher $out2,$out2,v29
> - le?vperm $in2,$in2,$in2,$inpperm
> - vcipher $out3,$out3,v29
> - le?vperm $in3,$in3,$in3,$inpperm
> - vcipher $out4,$out4,v29
> - le?vperm $in4,$in4,$in4,$inpperm
> - vcipher $out5,$out5,v29
> - le?vperm $in5,$in5,$in5,$inpperm
> - vcipher $out6,$out6,v29
> - le?vperm $in6,$in6,$in6,$inpperm
> - vcipher $out7,$out7,v29
> - le?vperm $in7,$in7,$in7,$inpperm
> -
> - add $inp,$inp,r0 # $inp is adjusted in such
> - # way that at exit from the
> - # loop inX-in7 are loaded
> - # with last "words"
> - subfe. r0,r0,r0 # borrow?-1:0
> - vcipher $out0,$out0,v30
> - vxor $in0,$in0,v31 # xor with last round key
> - vcipher $out1,$out1,v30
> - vxor $in1,$in1,v31
> - vcipher $out2,$out2,v30
> - vxor $in2,$in2,v31
> - vcipher $out3,$out3,v30
> - vxor $in3,$in3,v31
> - vcipher $out4,$out4,v30
> - vxor $in4,$in4,v31
> - vcipher $out5,$out5,v30
> - vxor $in5,$in5,v31
> - vcipher $out6,$out6,v30
> - vxor $in6,$in6,v31
> - vcipher $out7,$out7,v30
> - vxor $in7,$in7,v31
> -
> - bne Lctr32_enc8x_break # did $len-129 borrow?
> -
> - vcipherlast $in0,$out0,$in0
> - vcipherlast $in1,$out1,$in1
> - vadduqm $out1,$ivec,$one # counter values ...
> - vcipherlast $in2,$out2,$in2
> - vadduqm $out2,$ivec,$two
> - vxor $out0,$ivec,$rndkey0 # ... xored with rndkey[0]
> - vcipherlast $in3,$out3,$in3
> - vadduqm $out3,$out1,$two
> - vxor $out1,$out1,$rndkey0
> - vcipherlast $in4,$out4,$in4
> - vadduqm $out4,$out2,$two
> - vxor $out2,$out2,$rndkey0
> - vcipherlast $in5,$out5,$in5
> - vadduqm $out5,$out3,$two
> - vxor $out3,$out3,$rndkey0
> - vcipherlast $in6,$out6,$in6
> - vadduqm $out6,$out4,$two
> - vxor $out4,$out4,$rndkey0
> - vcipherlast $in7,$out7,$in7
> - vadduqm $out7,$out5,$two
> - vxor $out5,$out5,$rndkey0
> - le?vperm $in0,$in0,$in0,$inpperm
> - vadduqm $ivec,$out6,$two # next counter value
> - vxor $out6,$out6,$rndkey0
> - le?vperm $in1,$in1,$in1,$inpperm
> - vxor $out7,$out7,$rndkey0
> - mtctr $rounds
> -
> - vcipher $out0,$out0,v24
> - stvx_u $in0,$x00,$out
> - le?vperm $in2,$in2,$in2,$inpperm
> - vcipher $out1,$out1,v24
> - stvx_u $in1,$x10,$out
> - le?vperm $in3,$in3,$in3,$inpperm
> - vcipher $out2,$out2,v24
> - stvx_u $in2,$x20,$out
> - le?vperm $in4,$in4,$in4,$inpperm
> - vcipher $out3,$out3,v24
> - stvx_u $in3,$x30,$out
> - le?vperm $in5,$in5,$in5,$inpperm
> - vcipher $out4,$out4,v24
> - stvx_u $in4,$x40,$out
> - le?vperm $in6,$in6,$in6,$inpperm
> - vcipher $out5,$out5,v24
> - stvx_u $in5,$x50,$out
> - le?vperm $in7,$in7,$in7,$inpperm
> - vcipher $out6,$out6,v24
> - stvx_u $in6,$x60,$out
> - vcipher $out7,$out7,v24
> - stvx_u $in7,$x70,$out
> - addi $out,$out,0x80
> -
> - b Loop_ctr32_enc8x_middle
> -
> -.align 5
> -Lctr32_enc8x_break:
> - cmpwi $len,-0x60
> - blt Lctr32_enc8x_one
> - nop
> - beq Lctr32_enc8x_two
> - cmpwi $len,-0x40
> - blt Lctr32_enc8x_three
> - nop
> - beq Lctr32_enc8x_four
> - cmpwi $len,-0x20
> - blt Lctr32_enc8x_five
> - nop
> - beq Lctr32_enc8x_six
> - cmpwi $len,0x00
> - blt Lctr32_enc8x_seven
> -
> -Lctr32_enc8x_eight:
> - vcipherlast $out0,$out0,$in0
> - vcipherlast $out1,$out1,$in1
> - vcipherlast $out2,$out2,$in2
> - vcipherlast $out3,$out3,$in3
> - vcipherlast $out4,$out4,$in4
> - vcipherlast $out5,$out5,$in5
> - vcipherlast $out6,$out6,$in6
> - vcipherlast $out7,$out7,$in7
> -
> - le?vperm $out0,$out0,$out0,$inpperm
> - le?vperm $out1,$out1,$out1,$inpperm
> - stvx_u $out0,$x00,$out
> - le?vperm $out2,$out2,$out2,$inpperm
> - stvx_u $out1,$x10,$out
> - le?vperm $out3,$out3,$out3,$inpperm
> - stvx_u $out2,$x20,$out
> - le?vperm $out4,$out4,$out4,$inpperm
> - stvx_u $out3,$x30,$out
> - le?vperm $out5,$out5,$out5,$inpperm
> - stvx_u $out4,$x40,$out
> - le?vperm $out6,$out6,$out6,$inpperm
> - stvx_u $out5,$x50,$out
> - le?vperm $out7,$out7,$out7,$inpperm
> - stvx_u $out6,$x60,$out
> - stvx_u $out7,$x70,$out
> - addi $out,$out,0x80
> - b Lctr32_enc8x_done
> -
> -.align 5
> -Lctr32_enc8x_seven:
> - vcipherlast $out0,$out0,$in1
> - vcipherlast $out1,$out1,$in2
> - vcipherlast $out2,$out2,$in3
> - vcipherlast $out3,$out3,$in4
> - vcipherlast $out4,$out4,$in5
> - vcipherlast $out5,$out5,$in6
> - vcipherlast $out6,$out6,$in7
> -
> - le?vperm $out0,$out0,$out0,$inpperm
> - le?vperm $out1,$out1,$out1,$inpperm
> - stvx_u $out0,$x00,$out
> - le?vperm $out2,$out2,$out2,$inpperm
> - stvx_u $out1,$x10,$out
> - le?vperm $out3,$out3,$out3,$inpperm
> - stvx_u $out2,$x20,$out
> - le?vperm $out4,$out4,$out4,$inpperm
> - stvx_u $out3,$x30,$out
> - le?vperm $out5,$out5,$out5,$inpperm
> - stvx_u $out4,$x40,$out
> - le?vperm $out6,$out6,$out6,$inpperm
> - stvx_u $out5,$x50,$out
> - stvx_u $out6,$x60,$out
> - addi $out,$out,0x70
> - b Lctr32_enc8x_done
> -
> -.align 5
> -Lctr32_enc8x_six:
> - vcipherlast $out0,$out0,$in2
> - vcipherlast $out1,$out1,$in3
> - vcipherlast $out2,$out2,$in4
> - vcipherlast $out3,$out3,$in5
> - vcipherlast $out4,$out4,$in6
> - vcipherlast $out5,$out5,$in7
> -
> - le?vperm $out0,$out0,$out0,$inpperm
> - le?vperm $out1,$out1,$out1,$inpperm
> - stvx_u $out0,$x00,$out
> - le?vperm $out2,$out2,$out2,$inpperm
> - stvx_u $out1,$x10,$out
> - le?vperm $out3,$out3,$out3,$inpperm
> - stvx_u $out2,$x20,$out
> - le?vperm $out4,$out4,$out4,$inpperm
> - stvx_u $out3,$x30,$out
> - le?vperm $out5,$out5,$out5,$inpperm
> - stvx_u $out4,$x40,$out
> - stvx_u $out5,$x50,$out
> - addi $out,$out,0x60
> - b Lctr32_enc8x_done
> -
> -.align 5
> -Lctr32_enc8x_five:
> - vcipherlast $out0,$out0,$in3
> - vcipherlast $out1,$out1,$in4
> - vcipherlast $out2,$out2,$in5
> - vcipherlast $out3,$out3,$in6
> - vcipherlast $out4,$out4,$in7
> -
> - le?vperm $out0,$out0,$out0,$inpperm
> - le?vperm $out1,$out1,$out1,$inpperm
> - stvx_u $out0,$x00,$out
> - le?vperm $out2,$out2,$out2,$inpperm
> - stvx_u $out1,$x10,$out
> - le?vperm $out3,$out3,$out3,$inpperm
> - stvx_u $out2,$x20,$out
> - le?vperm $out4,$out4,$out4,$inpperm
> - stvx_u $out3,$x30,$out
> - stvx_u $out4,$x40,$out
> - addi $out,$out,0x50
> - b Lctr32_enc8x_done
> -
> -.align 5
> -Lctr32_enc8x_four:
> - vcipherlast $out0,$out0,$in4
> - vcipherlast $out1,$out1,$in5
> - vcipherlast $out2,$out2,$in6
> - vcipherlast $out3,$out3,$in7
> -
> - le?vperm $out0,$out0,$out0,$inpperm
> - le?vperm $out1,$out1,$out1,$inpperm
> - stvx_u $out0,$x00,$out
> - le?vperm $out2,$out2,$out2,$inpperm
> - stvx_u $out1,$x10,$out
> - le?vperm $out3,$out3,$out3,$inpperm
> - stvx_u $out2,$x20,$out
> - stvx_u $out3,$x30,$out
> - addi $out,$out,0x40
> - b Lctr32_enc8x_done
> -
> -.align 5
> -Lctr32_enc8x_three:
> - vcipherlast $out0,$out0,$in5
> - vcipherlast $out1,$out1,$in6
> - vcipherlast $out2,$out2,$in7
> -
> - le?vperm $out0,$out0,$out0,$inpperm
> - le?vperm $out1,$out1,$out1,$inpperm
> - stvx_u $out0,$x00,$out
> - le?vperm $out2,$out2,$out2,$inpperm
> - stvx_u $out1,$x10,$out
> - stvx_u $out2,$x20,$out
> - addi $out,$out,0x30
> - b Lcbc_dec8x_done
> -
> -.align 5
> -Lctr32_enc8x_two:
> - vcipherlast $out0,$out0,$in6
> - vcipherlast $out1,$out1,$in7
> -
> - le?vperm $out0,$out0,$out0,$inpperm
> - le?vperm $out1,$out1,$out1,$inpperm
> - stvx_u $out0,$x00,$out
> - stvx_u $out1,$x10,$out
> - addi $out,$out,0x20
> - b Lcbc_dec8x_done
> -
> -.align 5
> -Lctr32_enc8x_one:
> - vcipherlast $out0,$out0,$in7
> -
> - le?vperm $out0,$out0,$out0,$inpperm
> - stvx_u $out0,0,$out
> - addi $out,$out,0x10
> -
> -Lctr32_enc8x_done:
> - li r10,`$FRAME+15`
> - li r11,`$FRAME+31`
> - stvx $inpperm,r10,$sp # wipe copies of round keys
> - addi r10,r10,32
> - stvx $inpperm,r11,$sp
> - addi r11,r11,32
> - stvx $inpperm,r10,$sp
> - addi r10,r10,32
> - stvx $inpperm,r11,$sp
> - addi r11,r11,32
> - stvx $inpperm,r10,$sp
> - addi r10,r10,32
> - stvx $inpperm,r11,$sp
> - addi r11,r11,32
> - stvx $inpperm,r10,$sp
> - addi r10,r10,32
> - stvx $inpperm,r11,$sp
> - addi r11,r11,32
> -
> - mtspr 256,$vrsave
> - lvx v20,r10,$sp # ABI says so
> - addi r10,r10,32
> - lvx v21,r11,$sp
> - addi r11,r11,32
> - lvx v22,r10,$sp
> - addi r10,r10,32
> - lvx v23,r11,$sp
> - addi r11,r11,32
> - lvx v24,r10,$sp
> - addi r10,r10,32
> - lvx v25,r11,$sp
> - addi r11,r11,32
> - lvx v26,r10,$sp
> - addi r10,r10,32
> - lvx v27,r11,$sp
> - addi r11,r11,32
> - lvx v28,r10,$sp
> - addi r10,r10,32
> - lvx v29,r11,$sp
> - addi r11,r11,32
> - lvx v30,r10,$sp
> - lvx v31,r11,$sp
> - $POP r26,`$FRAME+21*16+0*$SIZE_T`($sp)
> - $POP r27,`$FRAME+21*16+1*$SIZE_T`($sp)
> - $POP r28,`$FRAME+21*16+2*$SIZE_T`($sp)
> - $POP r29,`$FRAME+21*16+3*$SIZE_T`($sp)
> - $POP r30,`$FRAME+21*16+4*$SIZE_T`($sp)
> - $POP r31,`$FRAME+21*16+5*$SIZE_T`($sp)
> - addi $sp,$sp,`$FRAME+21*16+6*$SIZE_T`
> - blr
> - .long 0
> - .byte 0,12,0x14,0,0x80,6,6,0
> - .long 0
> -.size .${prefix}_ctr32_encrypt_blocks,.-.${prefix}_ctr32_encrypt_blocks
> -___
> -}} }}}
> -
> -#########################################################################
> -{{{ # XTS procedures #
> -# int aes_p8_xts_[en|de]crypt(const char *inp, char *out, size_t len, #
> -# const AES_KEY *key1, const AES_KEY *key2, #
> -# [const] unsigned char iv[16]); #
> -# If $key2 is NULL, then a "tweak chaining" mode is engaged, in which #
> -# input tweak value is assumed to be encrypted already, and last tweak #
> -# value, one suitable for consecutive call on same chunk of data, is #
> -# written back to original buffer. In addition, in "tweak chaining" #
> -# mode only complete input blocks are processed. #
> -
> -my ($inp,$out,$len,$key1,$key2,$ivp,$rounds,$idx) = map("r$_",(3..10));
> -my ($rndkey0,$rndkey1,$inout) = map("v$_",(0..2));
> -my ($output,$inptail,$inpperm,$leperm,$keyperm) = map("v$_",(3..7));
> -my ($tweak,$seven,$eighty7,$tmp,$tweak1) = map("v$_",(8..12));
> -my $taillen = $key2;
> -
> - ($inp,$idx) = ($idx,$inp); # reassign
> -
> -$code.=<<___;
> -.globl .${prefix}_xts_encrypt
> - mr $inp,r3 # reassign
> - li r3,-1
> - ${UCMP}i $len,16
> - bltlr-
> -
> - lis r0,0xfff0
> - mfspr r12,256 # save vrsave
> - li r11,0
> - mtspr 256,r0
> -
> - vspltisb $seven,0x07 # 0x070707..07
> - le?lvsl $leperm,r11,r11
> - le?vspltisb $tmp,0x0f
> - le?vxor $leperm,$leperm,$seven
> -
> - li $idx,15
> - lvx $tweak,0,$ivp # load [unaligned] iv
> - lvsl $inpperm,0,$ivp
> - lvx $inptail,$idx,$ivp
> - le?vxor $inpperm,$inpperm,$tmp
> - vperm $tweak,$tweak,$inptail,$inpperm
> -
> - neg r11,$inp
> - lvsr $inpperm,0,r11 # prepare for unaligned load
> - lvx $inout,0,$inp
> - addi $inp,$inp,15 # 15 is not typo
> - le?vxor $inpperm,$inpperm,$tmp
> -
> - ${UCMP}i $key2,0 # key2==NULL?
> - beq Lxts_enc_no_key2
> -
> - ?lvsl $keyperm,0,$key2 # prepare for unaligned key
> - lwz $rounds,240($key2)
> - srwi $rounds,$rounds,1
> - subi $rounds,$rounds,1
> - li $idx,16
> -
> - lvx $rndkey0,0,$key2
> - lvx $rndkey1,$idx,$key2
> - addi $idx,$idx,16
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vxor $tweak,$tweak,$rndkey0
> - lvx $rndkey0,$idx,$key2
> - addi $idx,$idx,16
> - mtctr $rounds
> -
> -Ltweak_xts_enc:
> - ?vperm $rndkey1,$rndkey1,$rndkey0,$keyperm
> - vcipher $tweak,$tweak,$rndkey1
> - lvx $rndkey1,$idx,$key2
> - addi $idx,$idx,16
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vcipher $tweak,$tweak,$rndkey0
> - lvx $rndkey0,$idx,$key2
> - addi $idx,$idx,16
> - bdnz Ltweak_xts_enc
> -
> - ?vperm $rndkey1,$rndkey1,$rndkey0,$keyperm
> - vcipher $tweak,$tweak,$rndkey1
> - lvx $rndkey1,$idx,$key2
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vcipherlast $tweak,$tweak,$rndkey0
> -
> - li $ivp,0 # don't chain the tweak
> - b Lxts_enc
> -
> -Lxts_enc_no_key2:
> - li $idx,-16
> - and $len,$len,$idx # in "tweak chaining"
> - # mode only complete
> - # blocks are processed
> -Lxts_enc:
> - lvx $inptail,0,$inp
> - addi $inp,$inp,16
> -
> - ?lvsl $keyperm,0,$key1 # prepare for unaligned key
> - lwz $rounds,240($key1)
> - srwi $rounds,$rounds,1
> - subi $rounds,$rounds,1
> - li $idx,16
> -
> - vslb $eighty7,$seven,$seven # 0x808080..80
> - vor $eighty7,$eighty7,$seven # 0x878787..87
> - vspltisb $tmp,1 # 0x010101..01
> - vsldoi $eighty7,$eighty7,$tmp,15 # 0x870101..01
> -
> - ${UCMP}i $len,96
> - bge _aesp8_xts_encrypt6x
> -
> - andi. $taillen,$len,15
> - subic r0,$len,32
> - subi $taillen,$taillen,16
> - subfe r0,r0,r0
> - and r0,r0,$taillen
> - add $inp,$inp,r0
> -
> - lvx $rndkey0,0,$key1
> - lvx $rndkey1,$idx,$key1
> - addi $idx,$idx,16
> - vperm $inout,$inout,$inptail,$inpperm
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vxor $inout,$inout,$tweak
> - vxor $inout,$inout,$rndkey0
> - lvx $rndkey0,$idx,$key1
> - addi $idx,$idx,16
> - mtctr $rounds
> - b Loop_xts_enc
> -
> -.align 5
> -Loop_xts_enc:
> - ?vperm $rndkey1,$rndkey1,$rndkey0,$keyperm
> - vcipher $inout,$inout,$rndkey1
> - lvx $rndkey1,$idx,$key1
> - addi $idx,$idx,16
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vcipher $inout,$inout,$rndkey0
> - lvx $rndkey0,$idx,$key1
> - addi $idx,$idx,16
> - bdnz Loop_xts_enc
> -
> - ?vperm $rndkey1,$rndkey1,$rndkey0,$keyperm
> - vcipher $inout,$inout,$rndkey1
> - lvx $rndkey1,$idx,$key1
> - li $idx,16
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vxor $rndkey0,$rndkey0,$tweak
> - vcipherlast $output,$inout,$rndkey0
> -
> - le?vperm $tmp,$output,$output,$leperm
> - be?nop
> - le?stvx_u $tmp,0,$out
> - be?stvx_u $output,0,$out
> - addi $out,$out,16
> -
> - subic. $len,$len,16
> - beq Lxts_enc_done
> -
> - vmr $inout,$inptail
> - lvx $inptail,0,$inp
> - addi $inp,$inp,16
> - lvx $rndkey0,0,$key1
> - lvx $rndkey1,$idx,$key1
> - addi $idx,$idx,16
> -
> - subic r0,$len,32
> - subfe r0,r0,r0
> - and r0,r0,$taillen
> - add $inp,$inp,r0
> -
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - vand $tmp,$tmp,$eighty7
> - vxor $tweak,$tweak,$tmp
> -
> - vperm $inout,$inout,$inptail,$inpperm
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vxor $inout,$inout,$tweak
> - vxor $output,$output,$rndkey0 # just in case $len<16
> - vxor $inout,$inout,$rndkey0
> - lvx $rndkey0,$idx,$key1
> - addi $idx,$idx,16
> -
> - mtctr $rounds
> - ${UCMP}i $len,16
> - bge Loop_xts_enc
> -
> - vxor $output,$output,$tweak
> - lvsr $inpperm,0,$len # $inpperm is no longer needed
> - vxor $inptail,$inptail,$inptail # $inptail is no longer needed
> - vspltisb $tmp,-1
> - vperm $inptail,$inptail,$tmp,$inpperm
> - vsel $inout,$inout,$output,$inptail
> -
> - subi r11,$out,17
> - subi $out,$out,16
> - mtctr $len
> - li $len,16
> -Loop_xts_enc_steal:
> - lbzu r0,1(r11)
> - stb r0,16(r11)
> - bdnz Loop_xts_enc_steal
> -
> - mtctr $rounds
> - b Loop_xts_enc # one more time...
> -
> -Lxts_enc_done:
> - ${UCMP}i $ivp,0
> - beq Lxts_enc_ret
> -
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - vand $tmp,$tmp,$eighty7
> - vxor $tweak,$tweak,$tmp
> -
> - le?vperm $tweak,$tweak,$tweak,$leperm
> - stvx_u $tweak,0,$ivp
> -
> -Lxts_enc_ret:
> - mtspr 256,r12 # restore vrsave
> - li r3,0
> - blr
> - .long 0
> - .byte 0,12,0x04,0,0x80,6,6,0
> - .long 0
> -.size .${prefix}_xts_encrypt,.-.${prefix}_xts_encrypt
> -
> -.globl .${prefix}_xts_decrypt
> - mr $inp,r3 # reassign
> - li r3,-1
> - ${UCMP}i $len,16
> - bltlr-
> -
> - lis r0,0xfff8
> - mfspr r12,256 # save vrsave
> - li r11,0
> - mtspr 256,r0
> -
> - andi. r0,$len,15
> - neg r0,r0
> - andi. r0,r0,16
> - sub $len,$len,r0
> -
> - vspltisb $seven,0x07 # 0x070707..07
> - le?lvsl $leperm,r11,r11
> - le?vspltisb $tmp,0x0f
> - le?vxor $leperm,$leperm,$seven
> -
> - li $idx,15
> - lvx $tweak,0,$ivp # load [unaligned] iv
> - lvsl $inpperm,0,$ivp
> - lvx $inptail,$idx,$ivp
> - le?vxor $inpperm,$inpperm,$tmp
> - vperm $tweak,$tweak,$inptail,$inpperm
> -
> - neg r11,$inp
> - lvsr $inpperm,0,r11 # prepare for unaligned load
> - lvx $inout,0,$inp
> - addi $inp,$inp,15 # 15 is not typo
> - le?vxor $inpperm,$inpperm,$tmp
> -
> - ${UCMP}i $key2,0 # key2==NULL?
> - beq Lxts_dec_no_key2
> -
> - ?lvsl $keyperm,0,$key2 # prepare for unaligned key
> - lwz $rounds,240($key2)
> - srwi $rounds,$rounds,1
> - subi $rounds,$rounds,1
> - li $idx,16
> -
> - lvx $rndkey0,0,$key2
> - lvx $rndkey1,$idx,$key2
> - addi $idx,$idx,16
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vxor $tweak,$tweak,$rndkey0
> - lvx $rndkey0,$idx,$key2
> - addi $idx,$idx,16
> - mtctr $rounds
> -
> -Ltweak_xts_dec:
> - ?vperm $rndkey1,$rndkey1,$rndkey0,$keyperm
> - vcipher $tweak,$tweak,$rndkey1
> - lvx $rndkey1,$idx,$key2
> - addi $idx,$idx,16
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vcipher $tweak,$tweak,$rndkey0
> - lvx $rndkey0,$idx,$key2
> - addi $idx,$idx,16
> - bdnz Ltweak_xts_dec
> -
> - ?vperm $rndkey1,$rndkey1,$rndkey0,$keyperm
> - vcipher $tweak,$tweak,$rndkey1
> - lvx $rndkey1,$idx,$key2
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vcipherlast $tweak,$tweak,$rndkey0
> -
> - li $ivp,0 # don't chain the tweak
> - b Lxts_dec
> -
> -Lxts_dec_no_key2:
> - neg $idx,$len
> - andi. $idx,$idx,15
> - add $len,$len,$idx # in "tweak chaining"
> - # mode only complete
> - # blocks are processed
> -Lxts_dec:
> - lvx $inptail,0,$inp
> - addi $inp,$inp,16
> -
> - ?lvsl $keyperm,0,$key1 # prepare for unaligned key
> - lwz $rounds,240($key1)
> - srwi $rounds,$rounds,1
> - subi $rounds,$rounds,1
> - li $idx,16
> -
> - vslb $eighty7,$seven,$seven # 0x808080..80
> - vor $eighty7,$eighty7,$seven # 0x878787..87
> - vspltisb $tmp,1 # 0x010101..01
> - vsldoi $eighty7,$eighty7,$tmp,15 # 0x870101..01
> -
> - ${UCMP}i $len,96
> - bge _aesp8_xts_decrypt6x
> -
> - lvx $rndkey0,0,$key1
> - lvx $rndkey1,$idx,$key1
> - addi $idx,$idx,16
> - vperm $inout,$inout,$inptail,$inpperm
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vxor $inout,$inout,$tweak
> - vxor $inout,$inout,$rndkey0
> - lvx $rndkey0,$idx,$key1
> - addi $idx,$idx,16
> - mtctr $rounds
> -
> - ${UCMP}i $len,16
> - blt Ltail_xts_dec
> - be?b Loop_xts_dec
> -
> -.align 5
> -Loop_xts_dec:
> - ?vperm $rndkey1,$rndkey1,$rndkey0,$keyperm
> - vncipher $inout,$inout,$rndkey1
> - lvx $rndkey1,$idx,$key1
> - addi $idx,$idx,16
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vncipher $inout,$inout,$rndkey0
> - lvx $rndkey0,$idx,$key1
> - addi $idx,$idx,16
> - bdnz Loop_xts_dec
> -
> - ?vperm $rndkey1,$rndkey1,$rndkey0,$keyperm
> - vncipher $inout,$inout,$rndkey1
> - lvx $rndkey1,$idx,$key1
> - li $idx,16
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vxor $rndkey0,$rndkey0,$tweak
> - vncipherlast $output,$inout,$rndkey0
> -
> - le?vperm $tmp,$output,$output,$leperm
> - be?nop
> - le?stvx_u $tmp,0,$out
> - be?stvx_u $output,0,$out
> - addi $out,$out,16
> -
> - subic. $len,$len,16
> - beq Lxts_dec_done
> -
> - vmr $inout,$inptail
> - lvx $inptail,0,$inp
> - addi $inp,$inp,16
> - lvx $rndkey0,0,$key1
> - lvx $rndkey1,$idx,$key1
> - addi $idx,$idx,16
> -
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - vand $tmp,$tmp,$eighty7
> - vxor $tweak,$tweak,$tmp
> -
> - vperm $inout,$inout,$inptail,$inpperm
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vxor $inout,$inout,$tweak
> - vxor $inout,$inout,$rndkey0
> - lvx $rndkey0,$idx,$key1
> - addi $idx,$idx,16
> -
> - mtctr $rounds
> - ${UCMP}i $len,16
> - bge Loop_xts_dec
> -
> -Ltail_xts_dec:
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vaddubm $tweak1,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - vand $tmp,$tmp,$eighty7
> - vxor $tweak1,$tweak1,$tmp
> -
> - subi $inp,$inp,16
> - add $inp,$inp,$len
> -
> - vxor $inout,$inout,$tweak # :-(
> - vxor $inout,$inout,$tweak1 # :-)
> -
> -Loop_xts_dec_short:
> - ?vperm $rndkey1,$rndkey1,$rndkey0,$keyperm
> - vncipher $inout,$inout,$rndkey1
> - lvx $rndkey1,$idx,$key1
> - addi $idx,$idx,16
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vncipher $inout,$inout,$rndkey0
> - lvx $rndkey0,$idx,$key1
> - addi $idx,$idx,16
> - bdnz Loop_xts_dec_short
> -
> - ?vperm $rndkey1,$rndkey1,$rndkey0,$keyperm
> - vncipher $inout,$inout,$rndkey1
> - lvx $rndkey1,$idx,$key1
> - li $idx,16
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> - vxor $rndkey0,$rndkey0,$tweak1
> - vncipherlast $output,$inout,$rndkey0
> -
> - le?vperm $tmp,$output,$output,$leperm
> - be?nop
> - le?stvx_u $tmp,0,$out
> - be?stvx_u $output,0,$out
> -
> - vmr $inout,$inptail
> - lvx $inptail,0,$inp
> - #addi $inp,$inp,16
> - lvx $rndkey0,0,$key1
> - lvx $rndkey1,$idx,$key1
> - addi $idx,$idx,16
> - vperm $inout,$inout,$inptail,$inpperm
> - ?vperm $rndkey0,$rndkey0,$rndkey1,$keyperm
> -
> - lvsr $inpperm,0,$len # $inpperm is no longer needed
> - vxor $inptail,$inptail,$inptail # $inptail is no longer needed
> - vspltisb $tmp,-1
> - vperm $inptail,$inptail,$tmp,$inpperm
> - vsel $inout,$inout,$output,$inptail
> -
> - vxor $rndkey0,$rndkey0,$tweak
> - vxor $inout,$inout,$rndkey0
> - lvx $rndkey0,$idx,$key1
> - addi $idx,$idx,16
> -
> - subi r11,$out,1
> - mtctr $len
> - li $len,16
> -Loop_xts_dec_steal:
> - lbzu r0,1(r11)
> - stb r0,16(r11)
> - bdnz Loop_xts_dec_steal
> -
> - mtctr $rounds
> - b Loop_xts_dec # one more time...
> -
> -Lxts_dec_done:
> - ${UCMP}i $ivp,0
> - beq Lxts_dec_ret
> -
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - vand $tmp,$tmp,$eighty7
> - vxor $tweak,$tweak,$tmp
> -
> - le?vperm $tweak,$tweak,$tweak,$leperm
> - stvx_u $tweak,0,$ivp
> -
> -Lxts_dec_ret:
> - mtspr 256,r12 # restore vrsave
> - li r3,0
> - blr
> - .long 0
> - .byte 0,12,0x04,0,0x80,6,6,0
> - .long 0
> -.size .${prefix}_xts_decrypt,.-.${prefix}_xts_decrypt
> -___
> -#########################################################################
> -{{ # Optimized XTS procedures #
> -my $key_=$key2;
> -my ($x00,$x10,$x20,$x30,$x40,$x50,$x60,$x70)=map("r$_",(0,3,26..31));
> - $x00=0 if ($flavour =~ /osx/);
> -my ($in0, $in1, $in2, $in3, $in4, $in5 )=map("v$_",(0..5));
> -my ($out0, $out1, $out2, $out3, $out4, $out5)=map("v$_",(7,12..16));
> -my ($twk0, $twk1, $twk2, $twk3, $twk4, $twk5)=map("v$_",(17..22));
> -my $rndkey0="v23"; # v24-v25 rotating buffer for first found keys
> - # v26-v31 last 6 round keys
> -my ($keyperm)=($out0); # aliases with "caller", redundant assignment
> -my $taillen=$x70;
> -
> -$code.=<<___;
> -.align 5
> -_aesp8_xts_encrypt6x:
> - $STU $sp,-`($FRAME+21*16+6*$SIZE_T)`($sp)
> - mflr r11
> - li r7,`$FRAME+8*16+15`
> - li r3,`$FRAME+8*16+31`
> - $PUSH r11,`$FRAME+21*16+6*$SIZE_T+$LRSAVE`($sp)
> - stvx v20,r7,$sp # ABI says so
> - addi r7,r7,32
> - stvx v21,r3,$sp
> - addi r3,r3,32
> - stvx v22,r7,$sp
> - addi r7,r7,32
> - stvx v23,r3,$sp
> - addi r3,r3,32
> - stvx v24,r7,$sp
> - addi r7,r7,32
> - stvx v25,r3,$sp
> - addi r3,r3,32
> - stvx v26,r7,$sp
> - addi r7,r7,32
> - stvx v27,r3,$sp
> - addi r3,r3,32
> - stvx v28,r7,$sp
> - addi r7,r7,32
> - stvx v29,r3,$sp
> - addi r3,r3,32
> - stvx v30,r7,$sp
> - stvx v31,r3,$sp
> - li r0,-1
> - stw $vrsave,`$FRAME+21*16-4`($sp) # save vrsave
> - li $x10,0x10
> - $PUSH r26,`$FRAME+21*16+0*$SIZE_T`($sp)
> - li $x20,0x20
> - $PUSH r27,`$FRAME+21*16+1*$SIZE_T`($sp)
> - li $x30,0x30
> - $PUSH r28,`$FRAME+21*16+2*$SIZE_T`($sp)
> - li $x40,0x40
> - $PUSH r29,`$FRAME+21*16+3*$SIZE_T`($sp)
> - li $x50,0x50
> - $PUSH r30,`$FRAME+21*16+4*$SIZE_T`($sp)
> - li $x60,0x60
> - $PUSH r31,`$FRAME+21*16+5*$SIZE_T`($sp)
> - li $x70,0x70
> - mtspr 256,r0
> -
> - subi $rounds,$rounds,3 # -4 in total
> -
> - lvx $rndkey0,$x00,$key1 # load key schedule
> - lvx v30,$x10,$key1
> - addi $key1,$key1,0x20
> - lvx v31,$x00,$key1
> - ?vperm $rndkey0,$rndkey0,v30,$keyperm
> - addi $key_,$sp,$FRAME+15
> - mtctr $rounds
> -
> -Load_xts_enc_key:
> - ?vperm v24,v30,v31,$keyperm
> - lvx v30,$x10,$key1
> - addi $key1,$key1,0x20
> - stvx v24,$x00,$key_ # off-load round[1]
> - ?vperm v25,v31,v30,$keyperm
> - lvx v31,$x00,$key1
> - stvx v25,$x10,$key_ # off-load round[2]
> - addi $key_,$key_,0x20
> - bdnz Load_xts_enc_key
> -
> - lvx v26,$x10,$key1
> - ?vperm v24,v30,v31,$keyperm
> - lvx v27,$x20,$key1
> - stvx v24,$x00,$key_ # off-load round[3]
> - ?vperm v25,v31,v26,$keyperm
> - lvx v28,$x30,$key1
> - stvx v25,$x10,$key_ # off-load round[4]
> - addi $key_,$sp,$FRAME+15 # rewind $key_
> - ?vperm v26,v26,v27,$keyperm
> - lvx v29,$x40,$key1
> - ?vperm v27,v27,v28,$keyperm
> - lvx v30,$x50,$key1
> - ?vperm v28,v28,v29,$keyperm
> - lvx v31,$x60,$key1
> - ?vperm v29,v29,v30,$keyperm
> - lvx $twk5,$x70,$key1 # borrow $twk5
> - ?vperm v30,v30,v31,$keyperm
> - lvx v24,$x00,$key_ # pre-load round[1]
> - ?vperm v31,v31,$twk5,$keyperm
> - lvx v25,$x10,$key_ # pre-load round[2]
> -
> - vperm $in0,$inout,$inptail,$inpperm
> - subi $inp,$inp,31 # undo "caller"
> - vxor $twk0,$tweak,$rndkey0
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - vand $tmp,$tmp,$eighty7
> - vxor $out0,$in0,$twk0
> - vxor $tweak,$tweak,$tmp
> -
> - lvx_u $in1,$x10,$inp
> - vxor $twk1,$tweak,$rndkey0
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - le?vperm $in1,$in1,$in1,$leperm
> - vand $tmp,$tmp,$eighty7
> - vxor $out1,$in1,$twk1
> - vxor $tweak,$tweak,$tmp
> -
> - lvx_u $in2,$x20,$inp
> - andi. $taillen,$len,15
> - vxor $twk2,$tweak,$rndkey0
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - le?vperm $in2,$in2,$in2,$leperm
> - vand $tmp,$tmp,$eighty7
> - vxor $out2,$in2,$twk2
> - vxor $tweak,$tweak,$tmp
> -
> - lvx_u $in3,$x30,$inp
> - sub $len,$len,$taillen
> - vxor $twk3,$tweak,$rndkey0
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - le?vperm $in3,$in3,$in3,$leperm
> - vand $tmp,$tmp,$eighty7
> - vxor $out3,$in3,$twk3
> - vxor $tweak,$tweak,$tmp
> -
> - lvx_u $in4,$x40,$inp
> - subi $len,$len,0x60
> - vxor $twk4,$tweak,$rndkey0
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - le?vperm $in4,$in4,$in4,$leperm
> - vand $tmp,$tmp,$eighty7
> - vxor $out4,$in4,$twk4
> - vxor $tweak,$tweak,$tmp
> -
> - lvx_u $in5,$x50,$inp
> - addi $inp,$inp,0x60
> - vxor $twk5,$tweak,$rndkey0
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - le?vperm $in5,$in5,$in5,$leperm
> - vand $tmp,$tmp,$eighty7
> - vxor $out5,$in5,$twk5
> - vxor $tweak,$tweak,$tmp
> -
> - vxor v31,v31,$rndkey0
> - mtctr $rounds
> - b Loop_xts_enc6x
> -
> -.align 5
> -Loop_xts_enc6x:
> - vcipher $out0,$out0,v24
> - vcipher $out1,$out1,v24
> - vcipher $out2,$out2,v24
> - vcipher $out3,$out3,v24
> - vcipher $out4,$out4,v24
> - vcipher $out5,$out5,v24
> - lvx v24,$x20,$key_ # round[3]
> - addi $key_,$key_,0x20
> -
> - vcipher $out0,$out0,v25
> - vcipher $out1,$out1,v25
> - vcipher $out2,$out2,v25
> - vcipher $out3,$out3,v25
> - vcipher $out4,$out4,v25
> - vcipher $out5,$out5,v25
> - lvx v25,$x10,$key_ # round[4]
> - bdnz Loop_xts_enc6x
> -
> - subic $len,$len,96 # $len-=96
> - vxor $in0,$twk0,v31 # xor with last round key
> - vcipher $out0,$out0,v24
> - vcipher $out1,$out1,v24
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vxor $twk0,$tweak,$rndkey0
> - vaddubm $tweak,$tweak,$tweak
> - vcipher $out2,$out2,v24
> - vcipher $out3,$out3,v24
> - vsldoi $tmp,$tmp,$tmp,15
> - vcipher $out4,$out4,v24
> - vcipher $out5,$out5,v24
> -
> - subfe. r0,r0,r0 # borrow?-1:0
> - vand $tmp,$tmp,$eighty7
> - vcipher $out0,$out0,v25
> - vcipher $out1,$out1,v25
> - vxor $tweak,$tweak,$tmp
> - vcipher $out2,$out2,v25
> - vcipher $out3,$out3,v25
> - vxor $in1,$twk1,v31
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vxor $twk1,$tweak,$rndkey0
> - vcipher $out4,$out4,v25
> - vcipher $out5,$out5,v25
> -
> - and r0,r0,$len
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - vcipher $out0,$out0,v26
> - vcipher $out1,$out1,v26
> - vand $tmp,$tmp,$eighty7
> - vcipher $out2,$out2,v26
> - vcipher $out3,$out3,v26
> - vxor $tweak,$tweak,$tmp
> - vcipher $out4,$out4,v26
> - vcipher $out5,$out5,v26
> -
> - add $inp,$inp,r0 # $inp is adjusted in such
> - # way that at exit from the
> - # loop inX-in5 are loaded
> - # with last "words"
> - vxor $in2,$twk2,v31
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vxor $twk2,$tweak,$rndkey0
> - vaddubm $tweak,$tweak,$tweak
> - vcipher $out0,$out0,v27
> - vcipher $out1,$out1,v27
> - vsldoi $tmp,$tmp,$tmp,15
> - vcipher $out2,$out2,v27
> - vcipher $out3,$out3,v27
> - vand $tmp,$tmp,$eighty7
> - vcipher $out4,$out4,v27
> - vcipher $out5,$out5,v27
> -
> - addi $key_,$sp,$FRAME+15 # rewind $key_
> - vxor $tweak,$tweak,$tmp
> - vcipher $out0,$out0,v28
> - vcipher $out1,$out1,v28
> - vxor $in3,$twk3,v31
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vxor $twk3,$tweak,$rndkey0
> - vcipher $out2,$out2,v28
> - vcipher $out3,$out3,v28
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - vcipher $out4,$out4,v28
> - vcipher $out5,$out5,v28
> - lvx v24,$x00,$key_ # re-pre-load round[1]
> - vand $tmp,$tmp,$eighty7
> -
> - vcipher $out0,$out0,v29
> - vcipher $out1,$out1,v29
> - vxor $tweak,$tweak,$tmp
> - vcipher $out2,$out2,v29
> - vcipher $out3,$out3,v29
> - vxor $in4,$twk4,v31
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vxor $twk4,$tweak,$rndkey0
> - vcipher $out4,$out4,v29
> - vcipher $out5,$out5,v29
> - lvx v25,$x10,$key_ # re-pre-load round[2]
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> -
> - vcipher $out0,$out0,v30
> - vcipher $out1,$out1,v30
> - vand $tmp,$tmp,$eighty7
> - vcipher $out2,$out2,v30
> - vcipher $out3,$out3,v30
> - vxor $tweak,$tweak,$tmp
> - vcipher $out4,$out4,v30
> - vcipher $out5,$out5,v30
> - vxor $in5,$twk5,v31
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vxor $twk5,$tweak,$rndkey0
> -
> - vcipherlast $out0,$out0,$in0
> - lvx_u $in0,$x00,$inp # load next input block
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - vcipherlast $out1,$out1,$in1
> - lvx_u $in1,$x10,$inp
> - vcipherlast $out2,$out2,$in2
> - le?vperm $in0,$in0,$in0,$leperm
> - lvx_u $in2,$x20,$inp
> - vand $tmp,$tmp,$eighty7
> - vcipherlast $out3,$out3,$in3
> - le?vperm $in1,$in1,$in1,$leperm
> - lvx_u $in3,$x30,$inp
> - vcipherlast $out4,$out4,$in4
> - le?vperm $in2,$in2,$in2,$leperm
> - lvx_u $in4,$x40,$inp
> - vxor $tweak,$tweak,$tmp
> - vcipherlast $tmp,$out5,$in5 # last block might be needed
> - # in stealing mode
> - le?vperm $in3,$in3,$in3,$leperm
> - lvx_u $in5,$x50,$inp
> - addi $inp,$inp,0x60
> - le?vperm $in4,$in4,$in4,$leperm
> - le?vperm $in5,$in5,$in5,$leperm
> -
> - le?vperm $out0,$out0,$out0,$leperm
> - le?vperm $out1,$out1,$out1,$leperm
> - stvx_u $out0,$x00,$out # store output
> - vxor $out0,$in0,$twk0
> - le?vperm $out2,$out2,$out2,$leperm
> - stvx_u $out1,$x10,$out
> - vxor $out1,$in1,$twk1
> - le?vperm $out3,$out3,$out3,$leperm
> - stvx_u $out2,$x20,$out
> - vxor $out2,$in2,$twk2
> - le?vperm $out4,$out4,$out4,$leperm
> - stvx_u $out3,$x30,$out
> - vxor $out3,$in3,$twk3
> - le?vperm $out5,$tmp,$tmp,$leperm
> - stvx_u $out4,$x40,$out
> - vxor $out4,$in4,$twk4
> - le?stvx_u $out5,$x50,$out
> - be?stvx_u $tmp, $x50,$out
> - vxor $out5,$in5,$twk5
> - addi $out,$out,0x60
> -
> - mtctr $rounds
> - beq Loop_xts_enc6x # did $len-=96 borrow?
> -
> - addic. $len,$len,0x60
> - beq Lxts_enc6x_zero
> - cmpwi $len,0x20
> - blt Lxts_enc6x_one
> - nop
> - beq Lxts_enc6x_two
> - cmpwi $len,0x40
> - blt Lxts_enc6x_three
> - nop
> - beq Lxts_enc6x_four
> -
> -Lxts_enc6x_five:
> - vxor $out0,$in1,$twk0
> - vxor $out1,$in2,$twk1
> - vxor $out2,$in3,$twk2
> - vxor $out3,$in4,$twk3
> - vxor $out4,$in5,$twk4
> -
> - bl _aesp8_xts_enc5x
> -
> - le?vperm $out0,$out0,$out0,$leperm
> - vmr $twk0,$twk5 # unused tweak
> - le?vperm $out1,$out1,$out1,$leperm
> - stvx_u $out0,$x00,$out # store output
> - le?vperm $out2,$out2,$out2,$leperm
> - stvx_u $out1,$x10,$out
> - le?vperm $out3,$out3,$out3,$leperm
> - stvx_u $out2,$x20,$out
> - vxor $tmp,$out4,$twk5 # last block prep for stealing
> - le?vperm $out4,$out4,$out4,$leperm
> - stvx_u $out3,$x30,$out
> - stvx_u $out4,$x40,$out
> - addi $out,$out,0x50
> - bne Lxts_enc6x_steal
> - b Lxts_enc6x_done
> -
> -.align 4
> -Lxts_enc6x_four:
> - vxor $out0,$in2,$twk0
> - vxor $out1,$in3,$twk1
> - vxor $out2,$in4,$twk2
> - vxor $out3,$in5,$twk3
> - vxor $out4,$out4,$out4
> -
> - bl _aesp8_xts_enc5x
> -
> - le?vperm $out0,$out0,$out0,$leperm
> - vmr $twk0,$twk4 # unused tweak
> - le?vperm $out1,$out1,$out1,$leperm
> - stvx_u $out0,$x00,$out # store output
> - le?vperm $out2,$out2,$out2,$leperm
> - stvx_u $out1,$x10,$out
> - vxor $tmp,$out3,$twk4 # last block prep for stealing
> - le?vperm $out3,$out3,$out3,$leperm
> - stvx_u $out2,$x20,$out
> - stvx_u $out3,$x30,$out
> - addi $out,$out,0x40
> - bne Lxts_enc6x_steal
> - b Lxts_enc6x_done
> -
> -.align 4
> -Lxts_enc6x_three:
> - vxor $out0,$in3,$twk0
> - vxor $out1,$in4,$twk1
> - vxor $out2,$in5,$twk2
> - vxor $out3,$out3,$out3
> - vxor $out4,$out4,$out4
> -
> - bl _aesp8_xts_enc5x
> -
> - le?vperm $out0,$out0,$out0,$leperm
> - vmr $twk0,$twk3 # unused tweak
> - le?vperm $out1,$out1,$out1,$leperm
> - stvx_u $out0,$x00,$out # store output
> - vxor $tmp,$out2,$twk3 # last block prep for stealing
> - le?vperm $out2,$out2,$out2,$leperm
> - stvx_u $out1,$x10,$out
> - stvx_u $out2,$x20,$out
> - addi $out,$out,0x30
> - bne Lxts_enc6x_steal
> - b Lxts_enc6x_done
> -
> -.align 4
> -Lxts_enc6x_two:
> - vxor $out0,$in4,$twk0
> - vxor $out1,$in5,$twk1
> - vxor $out2,$out2,$out2
> - vxor $out3,$out3,$out3
> - vxor $out4,$out4,$out4
> -
> - bl _aesp8_xts_enc5x
> -
> - le?vperm $out0,$out0,$out0,$leperm
> - vmr $twk0,$twk2 # unused tweak
> - vxor $tmp,$out1,$twk2 # last block prep for stealing
> - le?vperm $out1,$out1,$out1,$leperm
> - stvx_u $out0,$x00,$out # store output
> - stvx_u $out1,$x10,$out
> - addi $out,$out,0x20
> - bne Lxts_enc6x_steal
> - b Lxts_enc6x_done
> -
> -.align 4
> -Lxts_enc6x_one:
> - vxor $out0,$in5,$twk0
> - nop
> -Loop_xts_enc1x:
> - vcipher $out0,$out0,v24
> - lvx v24,$x20,$key_ # round[3]
> - addi $key_,$key_,0x20
> -
> - vcipher $out0,$out0,v25
> - lvx v25,$x10,$key_ # round[4]
> - bdnz Loop_xts_enc1x
> -
> - add $inp,$inp,$taillen
> - cmpwi $taillen,0
> - vcipher $out0,$out0,v24
> -
> - subi $inp,$inp,16
> - vcipher $out0,$out0,v25
> -
> - lvsr $inpperm,0,$taillen
> - vcipher $out0,$out0,v26
> -
> - lvx_u $in0,0,$inp
> - vcipher $out0,$out0,v27
> -
> - addi $key_,$sp,$FRAME+15 # rewind $key_
> - vcipher $out0,$out0,v28
> - lvx v24,$x00,$key_ # re-pre-load round[1]
> -
> - vcipher $out0,$out0,v29
> - lvx v25,$x10,$key_ # re-pre-load round[2]
> - vxor $twk0,$twk0,v31
> -
> - le?vperm $in0,$in0,$in0,$leperm
> - vcipher $out0,$out0,v30
> -
> - vperm $in0,$in0,$in0,$inpperm
> - vcipherlast $out0,$out0,$twk0
> -
> - vmr $twk0,$twk1 # unused tweak
> - vxor $tmp,$out0,$twk1 # last block prep for stealing
> - le?vperm $out0,$out0,$out0,$leperm
> - stvx_u $out0,$x00,$out # store output
> - addi $out,$out,0x10
> - bne Lxts_enc6x_steal
> - b Lxts_enc6x_done
> -
> -.align 4
> -Lxts_enc6x_zero:
> - cmpwi $taillen,0
> - beq Lxts_enc6x_done
> -
> - add $inp,$inp,$taillen
> - subi $inp,$inp,16
> - lvx_u $in0,0,$inp
> - lvsr $inpperm,0,$taillen # $in5 is no more
> - le?vperm $in0,$in0,$in0,$leperm
> - vperm $in0,$in0,$in0,$inpperm
> - vxor $tmp,$tmp,$twk0
> -Lxts_enc6x_steal:
> - vxor $in0,$in0,$twk0
> - vxor $out0,$out0,$out0
> - vspltisb $out1,-1
> - vperm $out0,$out0,$out1,$inpperm
> - vsel $out0,$in0,$tmp,$out0 # $tmp is last block, remember?
> -
> - subi r30,$out,17
> - subi $out,$out,16
> - mtctr $taillen
> -Loop_xts_enc6x_steal:
> - lbzu r0,1(r30)
> - stb r0,16(r30)
> - bdnz Loop_xts_enc6x_steal
> -
> - li $taillen,0
> - mtctr $rounds
> - b Loop_xts_enc1x # one more time...
> -
> -.align 4
> -Lxts_enc6x_done:
> - ${UCMP}i $ivp,0
> - beq Lxts_enc6x_ret
> -
> - vxor $tweak,$twk0,$rndkey0
> - le?vperm $tweak,$tweak,$tweak,$leperm
> - stvx_u $tweak,0,$ivp
> -
> -Lxts_enc6x_ret:
> - mtlr r11
> - li r10,`$FRAME+15`
> - li r11,`$FRAME+31`
> - stvx $seven,r10,$sp # wipe copies of round keys
> - addi r10,r10,32
> - stvx $seven,r11,$sp
> - addi r11,r11,32
> - stvx $seven,r10,$sp
> - addi r10,r10,32
> - stvx $seven,r11,$sp
> - addi r11,r11,32
> - stvx $seven,r10,$sp
> - addi r10,r10,32
> - stvx $seven,r11,$sp
> - addi r11,r11,32
> - stvx $seven,r10,$sp
> - addi r10,r10,32
> - stvx $seven,r11,$sp
> - addi r11,r11,32
> -
> - mtspr 256,$vrsave
> - lvx v20,r10,$sp # ABI says so
> - addi r10,r10,32
> - lvx v21,r11,$sp
> - addi r11,r11,32
> - lvx v22,r10,$sp
> - addi r10,r10,32
> - lvx v23,r11,$sp
> - addi r11,r11,32
> - lvx v24,r10,$sp
> - addi r10,r10,32
> - lvx v25,r11,$sp
> - addi r11,r11,32
> - lvx v26,r10,$sp
> - addi r10,r10,32
> - lvx v27,r11,$sp
> - addi r11,r11,32
> - lvx v28,r10,$sp
> - addi r10,r10,32
> - lvx v29,r11,$sp
> - addi r11,r11,32
> - lvx v30,r10,$sp
> - lvx v31,r11,$sp
> - $POP r26,`$FRAME+21*16+0*$SIZE_T`($sp)
> - $POP r27,`$FRAME+21*16+1*$SIZE_T`($sp)
> - $POP r28,`$FRAME+21*16+2*$SIZE_T`($sp)
> - $POP r29,`$FRAME+21*16+3*$SIZE_T`($sp)
> - $POP r30,`$FRAME+21*16+4*$SIZE_T`($sp)
> - $POP r31,`$FRAME+21*16+5*$SIZE_T`($sp)
> - addi $sp,$sp,`$FRAME+21*16+6*$SIZE_T`
> - blr
> - .long 0
> - .byte 0,12,0x04,1,0x80,6,6,0
> - .long 0
> -
> -.align 5
> -_aesp8_xts_enc5x:
> - vcipher $out0,$out0,v24
> - vcipher $out1,$out1,v24
> - vcipher $out2,$out2,v24
> - vcipher $out3,$out3,v24
> - vcipher $out4,$out4,v24
> - lvx v24,$x20,$key_ # round[3]
> - addi $key_,$key_,0x20
> -
> - vcipher $out0,$out0,v25
> - vcipher $out1,$out1,v25
> - vcipher $out2,$out2,v25
> - vcipher $out3,$out3,v25
> - vcipher $out4,$out4,v25
> - lvx v25,$x10,$key_ # round[4]
> - bdnz _aesp8_xts_enc5x
> -
> - add $inp,$inp,$taillen
> - cmpwi $taillen,0
> - vcipher $out0,$out0,v24
> - vcipher $out1,$out1,v24
> - vcipher $out2,$out2,v24
> - vcipher $out3,$out3,v24
> - vcipher $out4,$out4,v24
> -
> - subi $inp,$inp,16
> - vcipher $out0,$out0,v25
> - vcipher $out1,$out1,v25
> - vcipher $out2,$out2,v25
> - vcipher $out3,$out3,v25
> - vcipher $out4,$out4,v25
> - vxor $twk0,$twk0,v31
> -
> - vcipher $out0,$out0,v26
> - lvsr $inpperm,r0,$taillen # $in5 is no more
> - vcipher $out1,$out1,v26
> - vcipher $out2,$out2,v26
> - vcipher $out3,$out3,v26
> - vcipher $out4,$out4,v26
> - vxor $in1,$twk1,v31
> -
> - vcipher $out0,$out0,v27
> - lvx_u $in0,0,$inp
> - vcipher $out1,$out1,v27
> - vcipher $out2,$out2,v27
> - vcipher $out3,$out3,v27
> - vcipher $out4,$out4,v27
> - vxor $in2,$twk2,v31
> -
> - addi $key_,$sp,$FRAME+15 # rewind $key_
> - vcipher $out0,$out0,v28
> - vcipher $out1,$out1,v28
> - vcipher $out2,$out2,v28
> - vcipher $out3,$out3,v28
> - vcipher $out4,$out4,v28
> - lvx v24,$x00,$key_ # re-pre-load round[1]
> - vxor $in3,$twk3,v31
> -
> - vcipher $out0,$out0,v29
> - le?vperm $in0,$in0,$in0,$leperm
> - vcipher $out1,$out1,v29
> - vcipher $out2,$out2,v29
> - vcipher $out3,$out3,v29
> - vcipher $out4,$out4,v29
> - lvx v25,$x10,$key_ # re-pre-load round[2]
> - vxor $in4,$twk4,v31
> -
> - vcipher $out0,$out0,v30
> - vperm $in0,$in0,$in0,$inpperm
> - vcipher $out1,$out1,v30
> - vcipher $out2,$out2,v30
> - vcipher $out3,$out3,v30
> - vcipher $out4,$out4,v30
> -
> - vcipherlast $out0,$out0,$twk0
> - vcipherlast $out1,$out1,$in1
> - vcipherlast $out2,$out2,$in2
> - vcipherlast $out3,$out3,$in3
> - vcipherlast $out4,$out4,$in4
> - blr
> - .long 0
> - .byte 0,12,0x14,0,0,0,0,0
> -
> -.align 5
> -_aesp8_xts_decrypt6x:
> - $STU $sp,-`($FRAME+21*16+6*$SIZE_T)`($sp)
> - mflr r11
> - li r7,`$FRAME+8*16+15`
> - li r3,`$FRAME+8*16+31`
> - $PUSH r11,`$FRAME+21*16+6*$SIZE_T+$LRSAVE`($sp)
> - stvx v20,r7,$sp # ABI says so
> - addi r7,r7,32
> - stvx v21,r3,$sp
> - addi r3,r3,32
> - stvx v22,r7,$sp
> - addi r7,r7,32
> - stvx v23,r3,$sp
> - addi r3,r3,32
> - stvx v24,r7,$sp
> - addi r7,r7,32
> - stvx v25,r3,$sp
> - addi r3,r3,32
> - stvx v26,r7,$sp
> - addi r7,r7,32
> - stvx v27,r3,$sp
> - addi r3,r3,32
> - stvx v28,r7,$sp
> - addi r7,r7,32
> - stvx v29,r3,$sp
> - addi r3,r3,32
> - stvx v30,r7,$sp
> - stvx v31,r3,$sp
> - li r0,-1
> - stw $vrsave,`$FRAME+21*16-4`($sp) # save vrsave
> - li $x10,0x10
> - $PUSH r26,`$FRAME+21*16+0*$SIZE_T`($sp)
> - li $x20,0x20
> - $PUSH r27,`$FRAME+21*16+1*$SIZE_T`($sp)
> - li $x30,0x30
> - $PUSH r28,`$FRAME+21*16+2*$SIZE_T`($sp)
> - li $x40,0x40
> - $PUSH r29,`$FRAME+21*16+3*$SIZE_T`($sp)
> - li $x50,0x50
> - $PUSH r30,`$FRAME+21*16+4*$SIZE_T`($sp)
> - li $x60,0x60
> - $PUSH r31,`$FRAME+21*16+5*$SIZE_T`($sp)
> - li $x70,0x70
> - mtspr 256,r0
> -
> - subi $rounds,$rounds,3 # -4 in total
> -
> - lvx $rndkey0,$x00,$key1 # load key schedule
> - lvx v30,$x10,$key1
> - addi $key1,$key1,0x20
> - lvx v31,$x00,$key1
> - ?vperm $rndkey0,$rndkey0,v30,$keyperm
> - addi $key_,$sp,$FRAME+15
> - mtctr $rounds
> -
> -Load_xts_dec_key:
> - ?vperm v24,v30,v31,$keyperm
> - lvx v30,$x10,$key1
> - addi $key1,$key1,0x20
> - stvx v24,$x00,$key_ # off-load round[1]
> - ?vperm v25,v31,v30,$keyperm
> - lvx v31,$x00,$key1
> - stvx v25,$x10,$key_ # off-load round[2]
> - addi $key_,$key_,0x20
> - bdnz Load_xts_dec_key
> -
> - lvx v26,$x10,$key1
> - ?vperm v24,v30,v31,$keyperm
> - lvx v27,$x20,$key1
> - stvx v24,$x00,$key_ # off-load round[3]
> - ?vperm v25,v31,v26,$keyperm
> - lvx v28,$x30,$key1
> - stvx v25,$x10,$key_ # off-load round[4]
> - addi $key_,$sp,$FRAME+15 # rewind $key_
> - ?vperm v26,v26,v27,$keyperm
> - lvx v29,$x40,$key1
> - ?vperm v27,v27,v28,$keyperm
> - lvx v30,$x50,$key1
> - ?vperm v28,v28,v29,$keyperm
> - lvx v31,$x60,$key1
> - ?vperm v29,v29,v30,$keyperm
> - lvx $twk5,$x70,$key1 # borrow $twk5
> - ?vperm v30,v30,v31,$keyperm
> - lvx v24,$x00,$key_ # pre-load round[1]
> - ?vperm v31,v31,$twk5,$keyperm
> - lvx v25,$x10,$key_ # pre-load round[2]
> -
> - vperm $in0,$inout,$inptail,$inpperm
> - subi $inp,$inp,31 # undo "caller"
> - vxor $twk0,$tweak,$rndkey0
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - vand $tmp,$tmp,$eighty7
> - vxor $out0,$in0,$twk0
> - vxor $tweak,$tweak,$tmp
> -
> - lvx_u $in1,$x10,$inp
> - vxor $twk1,$tweak,$rndkey0
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - le?vperm $in1,$in1,$in1,$leperm
> - vand $tmp,$tmp,$eighty7
> - vxor $out1,$in1,$twk1
> - vxor $tweak,$tweak,$tmp
> -
> - lvx_u $in2,$x20,$inp
> - andi. $taillen,$len,15
> - vxor $twk2,$tweak,$rndkey0
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - le?vperm $in2,$in2,$in2,$leperm
> - vand $tmp,$tmp,$eighty7
> - vxor $out2,$in2,$twk2
> - vxor $tweak,$tweak,$tmp
> -
> - lvx_u $in3,$x30,$inp
> - sub $len,$len,$taillen
> - vxor $twk3,$tweak,$rndkey0
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - le?vperm $in3,$in3,$in3,$leperm
> - vand $tmp,$tmp,$eighty7
> - vxor $out3,$in3,$twk3
> - vxor $tweak,$tweak,$tmp
> -
> - lvx_u $in4,$x40,$inp
> - subi $len,$len,0x60
> - vxor $twk4,$tweak,$rndkey0
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - le?vperm $in4,$in4,$in4,$leperm
> - vand $tmp,$tmp,$eighty7
> - vxor $out4,$in4,$twk4
> - vxor $tweak,$tweak,$tmp
> -
> - lvx_u $in5,$x50,$inp
> - addi $inp,$inp,0x60
> - vxor $twk5,$tweak,$rndkey0
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - le?vperm $in5,$in5,$in5,$leperm
> - vand $tmp,$tmp,$eighty7
> - vxor $out5,$in5,$twk5
> - vxor $tweak,$tweak,$tmp
> -
> - vxor v31,v31,$rndkey0
> - mtctr $rounds
> - b Loop_xts_dec6x
> -
> -.align 5
> -Loop_xts_dec6x:
> - vncipher $out0,$out0,v24
> - vncipher $out1,$out1,v24
> - vncipher $out2,$out2,v24
> - vncipher $out3,$out3,v24
> - vncipher $out4,$out4,v24
> - vncipher $out5,$out5,v24
> - lvx v24,$x20,$key_ # round[3]
> - addi $key_,$key_,0x20
> -
> - vncipher $out0,$out0,v25
> - vncipher $out1,$out1,v25
> - vncipher $out2,$out2,v25
> - vncipher $out3,$out3,v25
> - vncipher $out4,$out4,v25
> - vncipher $out5,$out5,v25
> - lvx v25,$x10,$key_ # round[4]
> - bdnz Loop_xts_dec6x
> -
> - subic $len,$len,96 # $len-=96
> - vxor $in0,$twk0,v31 # xor with last round key
> - vncipher $out0,$out0,v24
> - vncipher $out1,$out1,v24
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vxor $twk0,$tweak,$rndkey0
> - vaddubm $tweak,$tweak,$tweak
> - vncipher $out2,$out2,v24
> - vncipher $out3,$out3,v24
> - vsldoi $tmp,$tmp,$tmp,15
> - vncipher $out4,$out4,v24
> - vncipher $out5,$out5,v24
> -
> - subfe. r0,r0,r0 # borrow?-1:0
> - vand $tmp,$tmp,$eighty7
> - vncipher $out0,$out0,v25
> - vncipher $out1,$out1,v25
> - vxor $tweak,$tweak,$tmp
> - vncipher $out2,$out2,v25
> - vncipher $out3,$out3,v25
> - vxor $in1,$twk1,v31
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vxor $twk1,$tweak,$rndkey0
> - vncipher $out4,$out4,v25
> - vncipher $out5,$out5,v25
> -
> - and r0,r0,$len
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - vncipher $out0,$out0,v26
> - vncipher $out1,$out1,v26
> - vand $tmp,$tmp,$eighty7
> - vncipher $out2,$out2,v26
> - vncipher $out3,$out3,v26
> - vxor $tweak,$tweak,$tmp
> - vncipher $out4,$out4,v26
> - vncipher $out5,$out5,v26
> -
> - add $inp,$inp,r0 # $inp is adjusted in such
> - # way that at exit from the
> - # loop inX-in5 are loaded
> - # with last "words"
> - vxor $in2,$twk2,v31
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vxor $twk2,$tweak,$rndkey0
> - vaddubm $tweak,$tweak,$tweak
> - vncipher $out0,$out0,v27
> - vncipher $out1,$out1,v27
> - vsldoi $tmp,$tmp,$tmp,15
> - vncipher $out2,$out2,v27
> - vncipher $out3,$out3,v27
> - vand $tmp,$tmp,$eighty7
> - vncipher $out4,$out4,v27
> - vncipher $out5,$out5,v27
> -
> - addi $key_,$sp,$FRAME+15 # rewind $key_
> - vxor $tweak,$tweak,$tmp
> - vncipher $out0,$out0,v28
> - vncipher $out1,$out1,v28
> - vxor $in3,$twk3,v31
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vxor $twk3,$tweak,$rndkey0
> - vncipher $out2,$out2,v28
> - vncipher $out3,$out3,v28
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - vncipher $out4,$out4,v28
> - vncipher $out5,$out5,v28
> - lvx v24,$x00,$key_ # re-pre-load round[1]
> - vand $tmp,$tmp,$eighty7
> -
> - vncipher $out0,$out0,v29
> - vncipher $out1,$out1,v29
> - vxor $tweak,$tweak,$tmp
> - vncipher $out2,$out2,v29
> - vncipher $out3,$out3,v29
> - vxor $in4,$twk4,v31
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vxor $twk4,$tweak,$rndkey0
> - vncipher $out4,$out4,v29
> - vncipher $out5,$out5,v29
> - lvx v25,$x10,$key_ # re-pre-load round[2]
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> -
> - vncipher $out0,$out0,v30
> - vncipher $out1,$out1,v30
> - vand $tmp,$tmp,$eighty7
> - vncipher $out2,$out2,v30
> - vncipher $out3,$out3,v30
> - vxor $tweak,$tweak,$tmp
> - vncipher $out4,$out4,v30
> - vncipher $out5,$out5,v30
> - vxor $in5,$twk5,v31
> - vsrab $tmp,$tweak,$seven # next tweak value
> - vxor $twk5,$tweak,$rndkey0
> -
> - vncipherlast $out0,$out0,$in0
> - lvx_u $in0,$x00,$inp # load next input block
> - vaddubm $tweak,$tweak,$tweak
> - vsldoi $tmp,$tmp,$tmp,15
> - vncipherlast $out1,$out1,$in1
> - lvx_u $in1,$x10,$inp
> - vncipherlast $out2,$out2,$in2
> - le?vperm $in0,$in0,$in0,$leperm
> - lvx_u $in2,$x20,$inp
> - vand $tmp,$tmp,$eighty7
> - vncipherlast $out3,$out3,$in3
> - le?vperm $in1,$in1,$in1,$leperm
> - lvx_u $in3,$x30,$inp
> - vncipherlast $out4,$out4,$in4
> - le?vperm $in2,$in2,$in2,$leperm
> - lvx_u $in4,$x40,$inp
> - vxor $tweak,$tweak,$tmp
> - vncipherlast $out5,$out5,$in5
> - le?vperm $in3,$in3,$in3,$leperm
> - lvx_u $in5,$x50,$inp
> - addi $inp,$inp,0x60
> - le?vperm $in4,$in4,$in4,$leperm
> - le?vperm $in5,$in5,$in5,$leperm
> -
> - le?vperm $out0,$out0,$out0,$leperm
> - le?vperm $out1,$out1,$out1,$leperm
> - stvx_u $out0,$x00,$out # store output
> - vxor $out0,$in0,$twk0
> - le?vperm $out2,$out2,$out2,$leperm
> - stvx_u $out1,$x10,$out
> - vxor $out1,$in1,$twk1
> - le?vperm $out3,$out3,$out3,$leperm
> - stvx_u $out2,$x20,$out
> - vxor $out2,$in2,$twk2
> - le?vperm $out4,$out4,$out4,$leperm
> - stvx_u $out3,$x30,$out
> - vxor $out3,$in3,$twk3
> - le?vperm $out5,$out5,$out5,$leperm
> - stvx_u $out4,$x40,$out
> - vxor $out4,$in4,$twk4
> - stvx_u $out5,$x50,$out
> - vxor $out5,$in5,$twk5
> - addi $out,$out,0x60
> -
> - mtctr $rounds
> - beq Loop_xts_dec6x # did $len-=96 borrow?
> -
> - addic. $len,$len,0x60
> - beq Lxts_dec6x_zero
> - cmpwi $len,0x20
> - blt Lxts_dec6x_one
> - nop
> - beq Lxts_dec6x_two
> - cmpwi $len,0x40
> - blt Lxts_dec6x_three
> - nop
> - beq Lxts_dec6x_four
> -
> -Lxts_dec6x_five:
> - vxor $out0,$in1,$twk0
> - vxor $out1,$in2,$twk1
> - vxor $out2,$in3,$twk2
> - vxor $out3,$in4,$twk3
> - vxor $out4,$in5,$twk4
> -
> - bl _aesp8_xts_dec5x
> -
> - le?vperm $out0,$out0,$out0,$leperm
> - vmr $twk0,$twk5 # unused tweak
> - vxor $twk1,$tweak,$rndkey0
> - le?vperm $out1,$out1,$out1,$leperm
> - stvx_u $out0,$x00,$out # store output
> - vxor $out0,$in0,$twk1
> - le?vperm $out2,$out2,$out2,$leperm
> - stvx_u $out1,$x10,$out
> - le?vperm $out3,$out3,$out3,$leperm
> - stvx_u $out2,$x20,$out
> - le?vperm $out4,$out4,$out4,$leperm
> - stvx_u $out3,$x30,$out
> - stvx_u $out4,$x40,$out
> - addi $out,$out,0x50
> - bne Lxts_dec6x_steal
> - b Lxts_dec6x_done
> -
> -.align 4
> -Lxts_dec6x_four:
> - vxor $out0,$in2,$twk0
> - vxor $out1,$in3,$twk1
> - vxor $out2,$in4,$twk2
> - vxor $out3,$in5,$twk3
> - vxor $out4,$out4,$out4
> -
> - bl _aesp8_xts_dec5x
> -
> - le?vperm $out0,$out0,$out0,$leperm
> - vmr $twk0,$twk4 # unused tweak
> - vmr $twk1,$twk5
> - le?vperm $out1,$out1,$out1,$leperm
> - stvx_u $out0,$x00,$out # store output
> - vxor $out0,$in0,$twk5
> - le?vperm $out2,$out2,$out2,$leperm
> - stvx_u $out1,$x10,$out
> - le?vperm $out3,$out3,$out3,$leperm
> - stvx_u $out2,$x20,$out
> - stvx_u $out3,$x30,$out
> - addi $out,$out,0x40
> - bne Lxts_dec6x_steal
> - b Lxts_dec6x_done
> -
> -.align 4
> -Lxts_dec6x_three:
> - vxor $out0,$in3,$twk0
> - vxor $out1,$in4,$twk1
> - vxor $out2,$in5,$twk2
> - vxor $out3,$out3,$out3
> - vxor $out4,$out4,$out4
> -
> - bl _aesp8_xts_dec5x
> -
> - le?vperm $out0,$out0,$out0,$leperm
> - vmr $twk0,$twk3 # unused tweak
> - vmr $twk1,$twk4
> - le?vperm $out1,$out1,$out1,$leperm
> - stvx_u $out0,$x00,$out # store output
> - vxor $out0,$in0,$twk4
> - le?vperm $out2,$out2,$out2,$leperm
> - stvx_u $out1,$x10,$out
> - stvx_u $out2,$x20,$out
> - addi $out,$out,0x30
> - bne Lxts_dec6x_steal
> - b Lxts_dec6x_done
> -
> -.align 4
> -Lxts_dec6x_two:
> - vxor $out0,$in4,$twk0
> - vxor $out1,$in5,$twk1
> - vxor $out2,$out2,$out2
> - vxor $out3,$out3,$out3
> - vxor $out4,$out4,$out4
> -
> - bl _aesp8_xts_dec5x
> -
> - le?vperm $out0,$out0,$out0,$leperm
> - vmr $twk0,$twk2 # unused tweak
> - vmr $twk1,$twk3
> - le?vperm $out1,$out1,$out1,$leperm
> - stvx_u $out0,$x00,$out # store output
> - vxor $out0,$in0,$twk3
> - stvx_u $out1,$x10,$out
> - addi $out,$out,0x20
> - bne Lxts_dec6x_steal
> - b Lxts_dec6x_done
> -
> -.align 4
> -Lxts_dec6x_one:
> - vxor $out0,$in5,$twk0
> - nop
> -Loop_xts_dec1x:
> - vncipher $out0,$out0,v24
> - lvx v24,$x20,$key_ # round[3]
> - addi $key_,$key_,0x20
> -
> - vncipher $out0,$out0,v25
> - lvx v25,$x10,$key_ # round[4]
> - bdnz Loop_xts_dec1x
> -
> - subi r0,$taillen,1
> - vncipher $out0,$out0,v24
> -
> - andi. r0,r0,16
> - cmpwi $taillen,0
> - vncipher $out0,$out0,v25
> -
> - sub $inp,$inp,r0
> - vncipher $out0,$out0,v26
> -
> - lvx_u $in0,0,$inp
> - vncipher $out0,$out0,v27
> -
> - addi $key_,$sp,$FRAME+15 # rewind $key_
> - vncipher $out0,$out0,v28
> - lvx v24,$x00,$key_ # re-pre-load round[1]
> -
> - vncipher $out0,$out0,v29
> - lvx v25,$x10,$key_ # re-pre-load round[2]
> - vxor $twk0,$twk0,v31
> -
> - le?vperm $in0,$in0,$in0,$leperm
> - vncipher $out0,$out0,v30
> -
> - mtctr $rounds
> - vncipherlast $out0,$out0,$twk0
> -
> - vmr $twk0,$twk1 # unused tweak
> - vmr $twk1,$twk2
> - le?vperm $out0,$out0,$out0,$leperm
> - stvx_u $out0,$x00,$out # store output
> - addi $out,$out,0x10
> - vxor $out0,$in0,$twk2
> - bne Lxts_dec6x_steal
> - b Lxts_dec6x_done
> -
> -.align 4
> -Lxts_dec6x_zero:
> - cmpwi $taillen,0
> - beq Lxts_dec6x_done
> -
> - lvx_u $in0,0,$inp
> - le?vperm $in0,$in0,$in0,$leperm
> - vxor $out0,$in0,$twk1
> -Lxts_dec6x_steal:
> - vncipher $out0,$out0,v24
> - lvx v24,$x20,$key_ # round[3]
> - addi $key_,$key_,0x20
> -
> - vncipher $out0,$out0,v25
> - lvx v25,$x10,$key_ # round[4]
> - bdnz Lxts_dec6x_steal
> -
> - add $inp,$inp,$taillen
> - vncipher $out0,$out0,v24
> -
> - cmpwi $taillen,0
> - vncipher $out0,$out0,v25
> -
> - lvx_u $in0,0,$inp
> - vncipher $out0,$out0,v26
> -
> - lvsr $inpperm,0,$taillen # $in5 is no more
> - vncipher $out0,$out0,v27
> -
> - addi $key_,$sp,$FRAME+15 # rewind $key_
> - vncipher $out0,$out0,v28
> - lvx v24,$x00,$key_ # re-pre-load round[1]
> -
> - vncipher $out0,$out0,v29
> - lvx v25,$x10,$key_ # re-pre-load round[2]
> - vxor $twk1,$twk1,v31
> -
> - le?vperm $in0,$in0,$in0,$leperm
> - vncipher $out0,$out0,v30
> -
> - vperm $in0,$in0,$in0,$inpperm
> - vncipherlast $tmp,$out0,$twk1
> -
> - le?vperm $out0,$tmp,$tmp,$leperm
> - le?stvx_u $out0,0,$out
> - be?stvx_u $tmp,0,$out
> -
> - vxor $out0,$out0,$out0
> - vspltisb $out1,-1
> - vperm $out0,$out0,$out1,$inpperm
> - vsel $out0,$in0,$tmp,$out0
> - vxor $out0,$out0,$twk0
> -
> - subi r30,$out,1
> - mtctr $taillen
> -Loop_xts_dec6x_steal:
> - lbzu r0,1(r30)
> - stb r0,16(r30)
> - bdnz Loop_xts_dec6x_steal
> -
> - li $taillen,0
> - mtctr $rounds
> - b Loop_xts_dec1x # one more time...
> -
> -.align 4
> -Lxts_dec6x_done:
> - ${UCMP}i $ivp,0
> - beq Lxts_dec6x_ret
> -
> - vxor $tweak,$twk0,$rndkey0
> - le?vperm $tweak,$tweak,$tweak,$leperm
> - stvx_u $tweak,0,$ivp
> -
> -Lxts_dec6x_ret:
> - mtlr r11
> - li r10,`$FRAME+15`
> - li r11,`$FRAME+31`
> - stvx $seven,r10,$sp # wipe copies of round keys
> - addi r10,r10,32
> - stvx $seven,r11,$sp
> - addi r11,r11,32
> - stvx $seven,r10,$sp
> - addi r10,r10,32
> - stvx $seven,r11,$sp
> - addi r11,r11,32
> - stvx $seven,r10,$sp
> - addi r10,r10,32
> - stvx $seven,r11,$sp
> - addi r11,r11,32
> - stvx $seven,r10,$sp
> - addi r10,r10,32
> - stvx $seven,r11,$sp
> - addi r11,r11,32
> -
> - mtspr 256,$vrsave
> - lvx v20,r10,$sp # ABI says so
> - addi r10,r10,32
> - lvx v21,r11,$sp
> - addi r11,r11,32
> - lvx v22,r10,$sp
> - addi r10,r10,32
> - lvx v23,r11,$sp
> - addi r11,r11,32
> - lvx v24,r10,$sp
> - addi r10,r10,32
> - lvx v25,r11,$sp
> - addi r11,r11,32
> - lvx v26,r10,$sp
> - addi r10,r10,32
> - lvx v27,r11,$sp
> - addi r11,r11,32
> - lvx v28,r10,$sp
> - addi r10,r10,32
> - lvx v29,r11,$sp
> - addi r11,r11,32
> - lvx v30,r10,$sp
> - lvx v31,r11,$sp
> - $POP r26,`$FRAME+21*16+0*$SIZE_T`($sp)
> - $POP r27,`$FRAME+21*16+1*$SIZE_T`($sp)
> - $POP r28,`$FRAME+21*16+2*$SIZE_T`($sp)
> - $POP r29,`$FRAME+21*16+3*$SIZE_T`($sp)
> - $POP r30,`$FRAME+21*16+4*$SIZE_T`($sp)
> - $POP r31,`$FRAME+21*16+5*$SIZE_T`($sp)
> - addi $sp,$sp,`$FRAME+21*16+6*$SIZE_T`
> - blr
> - .long 0
> - .byte 0,12,0x04,1,0x80,6,6,0
> - .long 0
> -
> -.align 5
> -_aesp8_xts_dec5x:
> - vncipher $out0,$out0,v24
> - vncipher $out1,$out1,v24
> - vncipher $out2,$out2,v24
> - vncipher $out3,$out3,v24
> - vncipher $out4,$out4,v24
> - lvx v24,$x20,$key_ # round[3]
> - addi $key_,$key_,0x20
> -
> - vncipher $out0,$out0,v25
> - vncipher $out1,$out1,v25
> - vncipher $out2,$out2,v25
> - vncipher $out3,$out3,v25
> - vncipher $out4,$out4,v25
> - lvx v25,$x10,$key_ # round[4]
> - bdnz _aesp8_xts_dec5x
> -
> - subi r0,$taillen,1
> - vncipher $out0,$out0,v24
> - vncipher $out1,$out1,v24
> - vncipher $out2,$out2,v24
> - vncipher $out3,$out3,v24
> - vncipher $out4,$out4,v24
> -
> - andi. r0,r0,16
> - cmpwi $taillen,0
> - vncipher $out0,$out0,v25
> - vncipher $out1,$out1,v25
> - vncipher $out2,$out2,v25
> - vncipher $out3,$out3,v25
> - vncipher $out4,$out4,v25
> - vxor $twk0,$twk0,v31
> -
> - sub $inp,$inp,r0
> - vncipher $out0,$out0,v26
> - vncipher $out1,$out1,v26
> - vncipher $out2,$out2,v26
> - vncipher $out3,$out3,v26
> - vncipher $out4,$out4,v26
> - vxor $in1,$twk1,v31
> -
> - vncipher $out0,$out0,v27
> - lvx_u $in0,0,$inp
> - vncipher $out1,$out1,v27
> - vncipher $out2,$out2,v27
> - vncipher $out3,$out3,v27
> - vncipher $out4,$out4,v27
> - vxor $in2,$twk2,v31
> -
> - addi $key_,$sp,$FRAME+15 # rewind $key_
> - vncipher $out0,$out0,v28
> - vncipher $out1,$out1,v28
> - vncipher $out2,$out2,v28
> - vncipher $out3,$out3,v28
> - vncipher $out4,$out4,v28
> - lvx v24,$x00,$key_ # re-pre-load round[1]
> - vxor $in3,$twk3,v31
> -
> - vncipher $out0,$out0,v29
> - le?vperm $in0,$in0,$in0,$leperm
> - vncipher $out1,$out1,v29
> - vncipher $out2,$out2,v29
> - vncipher $out3,$out3,v29
> - vncipher $out4,$out4,v29
> - lvx v25,$x10,$key_ # re-pre-load round[2]
> - vxor $in4,$twk4,v31
> -
> - vncipher $out0,$out0,v30
> - vncipher $out1,$out1,v30
> - vncipher $out2,$out2,v30
> - vncipher $out3,$out3,v30
> - vncipher $out4,$out4,v30
> -
> - vncipherlast $out0,$out0,$twk0
> - vncipherlast $out1,$out1,$in1
> - vncipherlast $out2,$out2,$in2
> - vncipherlast $out3,$out3,$in3
> - vncipherlast $out4,$out4,$in4
> - mtctr $rounds
> - blr
> - .long 0
> - .byte 0,12,0x14,0,0,0,0,0
> -___
> -}} }}}
> -
> -my $consts=1;
> -foreach(split("\n",$code)) {
> - s/\`([^\`]*)\`/eval($1)/geo;
> -
> - # constants table endian-specific conversion
> - if ($consts && m/\.(long|byte)\s+(.+)\s+(\?[a-z]*)$/o) {
> - my $conv=$3;
> - my @bytes=();
> -
> - # convert to endian-agnostic format
> - if ($1 eq "long") {
> - foreach (split(/,\s*/,$2)) {
> - my $l = /^0/?oct:int;
> - push @bytes,($l>>24)&0xff,($l>>16)&0xff,($l>>8)&0xff,$l&0xff;
> - }
> - } else {
> - @bytes = map(/^0/?oct:int,split(/,\s*/,$2));
> - }
> -
> - # little-endian conversion
> - if ($flavour =~ /le$/o) {
> - SWITCH: for($conv) {
> - /\?inv/ && do { @bytes=map($_^0xf,@bytes); last; };
> - /\?rev/ && do { @bytes=reverse(@bytes); last; };
> - }
> - }
> -
> - #emit
> - print ".byte\t",join(',',map (sprintf("0x%02x",$_),@bytes)),"\n";
> - next;
> - }
> - $consts=0 if (m/Lconsts:/o); # end of table
> -
> - # instructions prefixed with '?' are endian-specific and need
> - # to be adjusted accordingly...
> - if ($flavour =~ /le$/o) { # little-endian
> - s/le\?//o or
> - s/be\?/#be#/o or
> - s/\?lvsr/lvsl/o or
> - s/\?lvsl/lvsr/o or
> - s/\?(vperm\s+v[0-9]+,\s*)(v[0-9]+,\s*)(v[0-9]+,\s*)(v[0-9]+)/$1$3$2$4/o or
> - s/\?(vsldoi\s+v[0-9]+,\s*)(v[0-9]+,)\s*(v[0-9]+,\s*)([0-9]+)/$1$3$2 16-$4/o or
> - s/\?(vspltw\s+v[0-9]+,\s*)(v[0-9]+,)\s*([0-9])/$1$2 3-$3/o;
> - } else { # big-endian
> - s/le\?/#le#/o or
> - s/be\?//o or
> - s/\?([a-z]+)/$1/o;
> - }
> -
> - print $_,"\n";
> -}
> -
> -close STDOUT;
> diff --git a/drivers/crypto/vmx/ghash.c b/drivers/crypto/vmx/ghash.c
> deleted file mode 100644
> index 27a94a119009..000000000000
> --- a/drivers/crypto/vmx/ghash.c
> +++ /dev/null
> @@ -1,227 +0,0 @@
> -/**
> - * GHASH routines supporting VMX instructions on the Power 8
> - *
> - * Copyright (C) 2015 International Business Machines Inc.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; version 2 only.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> - *
> - * Author: Marcelo Henrique Cerri <mhcerri@xxxxxxxxxx>
> - */
> -
> -#include <linux/types.h>
> -#include <linux/err.h>
> -#include <linux/crypto.h>
> -#include <linux/delay.h>
> -#include <linux/hardirq.h>
> -#include <asm/switch_to.h>
> -#include <crypto/aes.h>
> -#include <crypto/ghash.h>
> -#include <crypto/scatterwalk.h>
> -#include <crypto/internal/hash.h>
> -#include <crypto/b128ops.h>
> -
> -#define IN_INTERRUPT in_interrupt()
> -
> -void gcm_init_p8(u128 htable[16], const u64 Xi[2]);
> -void gcm_gmult_p8(u64 Xi[2], const u128 htable[16]);
> -void gcm_ghash_p8(u64 Xi[2], const u128 htable[16],
> - const u8 *in, size_t len);
> -
> -struct p8_ghash_ctx {
> - u128 htable[16];
> - struct crypto_shash *fallback;
> -};
> -
> -struct p8_ghash_desc_ctx {
> - u64 shash[2];
> - u8 buffer[GHASH_DIGEST_SIZE];
> - int bytes;
> - struct shash_desc fallback_desc;
> -};
> -
> -static int p8_ghash_init_tfm(struct crypto_tfm *tfm)
> -{
> - const char *alg = "ghash-generic";
> - struct crypto_shash *fallback;
> - struct crypto_shash *shash_tfm = __crypto_shash_cast(tfm);
> - struct p8_ghash_ctx *ctx = crypto_tfm_ctx(tfm);
> -
> - fallback = crypto_alloc_shash(alg, 0, CRYPTO_ALG_NEED_FALLBACK);
> - if (IS_ERR(fallback)) {
> - printk(KERN_ERR
> - "Failed to allocate transformation for '%s': %ld\n",
> - alg, PTR_ERR(fallback));
> - return PTR_ERR(fallback);
> - }
> - printk(KERN_INFO "Using '%s' as fallback implementation.\n",
> - crypto_tfm_alg_driver_name(crypto_shash_tfm(fallback)));
> -
> - crypto_shash_set_flags(fallback,
> - crypto_shash_get_flags((struct crypto_shash
> - *) tfm));
> -
> - /* Check if the descsize defined in the algorithm is still enough. */
> - if (shash_tfm->descsize < sizeof(struct p8_ghash_desc_ctx)
> - + crypto_shash_descsize(fallback)) {
> - printk(KERN_ERR
> - "Desc size of the fallback implementation (%s) does not match the expected value: %lu vs %u\n",
> - alg,
> - shash_tfm->descsize - sizeof(struct p8_ghash_desc_ctx),
> - crypto_shash_descsize(fallback));
> - return -EINVAL;
> - }
> - ctx->fallback = fallback;
> -
> - return 0;
> -}
> -
> -static void p8_ghash_exit_tfm(struct crypto_tfm *tfm)
> -{
> - struct p8_ghash_ctx *ctx = crypto_tfm_ctx(tfm);
> -
> - if (ctx->fallback) {
> - crypto_free_shash(ctx->fallback);
> - ctx->fallback = NULL;
> - }
> -}
> -
> -static int p8_ghash_init(struct shash_desc *desc)
> -{
> - struct p8_ghash_ctx *ctx = crypto_tfm_ctx(crypto_shash_tfm(desc->tfm));
> - struct p8_ghash_desc_ctx *dctx = shash_desc_ctx(desc);
> -
> - dctx->bytes = 0;
> - memset(dctx->shash, 0, GHASH_DIGEST_SIZE);
> - dctx->fallback_desc.tfm = ctx->fallback;
> - dctx->fallback_desc.flags = desc->flags;
> - return crypto_shash_init(&dctx->fallback_desc);
> -}
> -
> -static int p8_ghash_setkey(struct crypto_shash *tfm, const u8 *key,
> - unsigned int keylen)
> -{
> - struct p8_ghash_ctx *ctx = crypto_tfm_ctx(crypto_shash_tfm(tfm));
> -
> - if (keylen != GHASH_BLOCK_SIZE)
> - return -EINVAL;
> -
> - preempt_disable();
> - pagefault_disable();
> - enable_kernel_vsx();
> - gcm_init_p8(ctx->htable, (const u64 *) key);
> - disable_kernel_vsx();
> - pagefault_enable();
> - preempt_enable();
> - return crypto_shash_setkey(ctx->fallback, key, keylen);
> -}
> -
> -static int p8_ghash_update(struct shash_desc *desc,
> - const u8 *src, unsigned int srclen)
> -{
> - unsigned int len;
> - struct p8_ghash_ctx *ctx = crypto_tfm_ctx(crypto_shash_tfm(desc->tfm));
> - struct p8_ghash_desc_ctx *dctx = shash_desc_ctx(desc);
> -
> - if (IN_INTERRUPT) {
> - return crypto_shash_update(&dctx->fallback_desc, src,
> - srclen);
> - } else {
> - if (dctx->bytes) {
> - if (dctx->bytes + srclen < GHASH_DIGEST_SIZE) {
> - memcpy(dctx->buffer + dctx->bytes, src,
> - srclen);
> - dctx->bytes += srclen;
> - return 0;
> - }
> - memcpy(dctx->buffer + dctx->bytes, src,
> - GHASH_DIGEST_SIZE - dctx->bytes);
> - preempt_disable();
> - pagefault_disable();
> - enable_kernel_vsx();
> - gcm_ghash_p8(dctx->shash, ctx->htable,
> - dctx->buffer, GHASH_DIGEST_SIZE);
> - disable_kernel_vsx();
> - pagefault_enable();
> - preempt_enable();
> - src += GHASH_DIGEST_SIZE - dctx->bytes;
> - srclen -= GHASH_DIGEST_SIZE - dctx->bytes;
> - dctx->bytes = 0;
> - }
> - len = srclen & ~(GHASH_DIGEST_SIZE - 1);
> - if (len) {
> - preempt_disable();
> - pagefault_disable();
> - enable_kernel_vsx();
> - gcm_ghash_p8(dctx->shash, ctx->htable, src, len);
> - disable_kernel_vsx();
> - pagefault_enable();
> - preempt_enable();
> - src += len;
> - srclen -= len;
> - }
> - if (srclen) {
> - memcpy(dctx->buffer, src, srclen);
> - dctx->bytes = srclen;
> - }
> - return 0;
> - }
> -}
> -
> -static int p8_ghash_final(struct shash_desc *desc, u8 *out)
> -{
> - int i;
> - struct p8_ghash_ctx *ctx = crypto_tfm_ctx(crypto_shash_tfm(desc->tfm));
> - struct p8_ghash_desc_ctx *dctx = shash_desc_ctx(desc);
> -
> - if (IN_INTERRUPT) {
> - return crypto_shash_final(&dctx->fallback_desc, out);
> - } else {
> - if (dctx->bytes) {
> - for (i = dctx->bytes; i < GHASH_DIGEST_SIZE; i++)
> - dctx->buffer[i] = 0;
> - preempt_disable();
> - pagefault_disable();
> - enable_kernel_vsx();
> - gcm_ghash_p8(dctx->shash, ctx->htable,
> - dctx->buffer, GHASH_DIGEST_SIZE);
> - disable_kernel_vsx();
> - pagefault_enable();
> - preempt_enable();
> - dctx->bytes = 0;
> - }
> - memcpy(out, dctx->shash, GHASH_DIGEST_SIZE);
> - return 0;
> - }
> -}
> -
> -struct shash_alg p8_ghash_alg = {
> - .digestsize = GHASH_DIGEST_SIZE,
> - .init = p8_ghash_init,
> - .update = p8_ghash_update,
> - .final = p8_ghash_final,
> - .setkey = p8_ghash_setkey,
> - .descsize = sizeof(struct p8_ghash_desc_ctx)
> - + sizeof(struct ghash_desc_ctx),
> - .base = {
> - .cra_name = "ghash",
> - .cra_driver_name = "p8_ghash",
> - .cra_priority = 1000,
> - .cra_flags = CRYPTO_ALG_TYPE_SHASH | CRYPTO_ALG_NEED_FALLBACK,
> - .cra_blocksize = GHASH_BLOCK_SIZE,
> - .cra_ctxsize = sizeof(struct p8_ghash_ctx),
> - .cra_module = THIS_MODULE,
> - .cra_init = p8_ghash_init_tfm,
> - .cra_exit = p8_ghash_exit_tfm,
> - },
> -};
> diff --git a/drivers/crypto/vmx/ghashp8-ppc.pl b/drivers/crypto/vmx/ghashp8-ppc.pl
> deleted file mode 100644
> index d8429cb71f02..000000000000
> --- a/drivers/crypto/vmx/ghashp8-ppc.pl
> +++ /dev/null
> @@ -1,234 +0,0 @@
> -#!/usr/bin/env perl
> -#
> -# ====================================================================
> -# Written by Andy Polyakov <appro@xxxxxxxxxxx> for the OpenSSL
> -# project. The module is, however, dual licensed under OpenSSL and
> -# CRYPTOGAMS licenses depending on where you obtain it. For further
> -# details see http://www.openssl.org/~appro/cryptogams/.
> -# ====================================================================
> -#
> -# GHASH for for PowerISA v2.07.
> -#
> -# July 2014
> -#
> -# Accurate performance measurements are problematic, because it's
> -# always virtualized setup with possibly throttled processor.
> -# Relative comparison is therefore more informative. This initial
> -# version is ~2.1x slower than hardware-assisted AES-128-CTR, ~12x
> -# faster than "4-bit" integer-only compiler-generated 64-bit code.
> -# "Initial version" means that there is room for futher improvement.
> -
> -$flavour=shift;
> -$output =shift;
> -
> -if ($flavour =~ /64/) {
> - $SIZE_T=8;
> - $LRSAVE=2*$SIZE_T;
> - $STU="stdu";
> - $POP="ld";
> - $PUSH="std";
> -} elsif ($flavour =~ /32/) {
> - $SIZE_T=4;
> - $LRSAVE=$SIZE_T;
> - $STU="stwu";
> - $POP="lwz";
> - $PUSH="stw";
> -} else { die "nonsense $flavour"; }
> -
> -$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
> -( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
> -( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
> -die "can't locate ppc-xlate.pl";
> -
> -open STDOUT,"| $^X $xlate $flavour $output" || die "can't call $xlate: $!";
> -
> -my ($Xip,$Htbl,$inp,$len)=map("r$_",(3..6)); # argument block
> -
> -my ($Xl,$Xm,$Xh,$IN)=map("v$_",(0..3));
> -my ($zero,$t0,$t1,$t2,$xC2,$H,$Hh,$Hl,$lemask)=map("v$_",(4..12));
> -my $vrsave="r12";
> -
> -$code=<<___;
> -.machine "any"
> -
> -.text
> -
> -.globl .gcm_init_p8
> - lis r0,0xfff0
> - li r8,0x10
> - mfspr $vrsave,256
> - li r9,0x20
> - mtspr 256,r0
> - li r10,0x30
> - lvx_u $H,0,r4 # load H
> - le?xor r7,r7,r7
> - le?addi r7,r7,0x8 # need a vperm start with 08
> - le?lvsr 5,0,r7
> - le?vspltisb 6,0x0f
> - le?vxor 5,5,6 # set a b-endian mask
> - le?vperm $H,$H,$H,5
> -
> - vspltisb $xC2,-16 # 0xf0
> - vspltisb $t0,1 # one
> - vaddubm $xC2,$xC2,$xC2 # 0xe0
> - vxor $zero,$zero,$zero
> - vor $xC2,$xC2,$t0 # 0xe1
> - vsldoi $xC2,$xC2,$zero,15 # 0xe1...
> - vsldoi $t1,$zero,$t0,1 # ...1
> - vaddubm $xC2,$xC2,$xC2 # 0xc2...
> - vspltisb $t2,7
> - vor $xC2,$xC2,$t1 # 0xc2....01
> - vspltb $t1,$H,0 # most significant byte
> - vsl $H,$H,$t0 # H<<=1
> - vsrab $t1,$t1,$t2 # broadcast carry bit
> - vand $t1,$t1,$xC2
> - vxor $H,$H,$t1 # twisted H
> -
> - vsldoi $H,$H,$H,8 # twist even more ...
> - vsldoi $xC2,$zero,$xC2,8 # 0xc2.0
> - vsldoi $Hl,$zero,$H,8 # ... and split
> - vsldoi $Hh,$H,$zero,8
> -
> - stvx_u $xC2,0,r3 # save pre-computed table
> - stvx_u $Hl,r8,r3
> - stvx_u $H, r9,r3
> - stvx_u $Hh,r10,r3
> -
> - mtspr 256,$vrsave
> - blr
> - .long 0
> - .byte 0,12,0x14,0,0,0,2,0
> - .long 0
> -.size .gcm_init_p8,.-.gcm_init_p8
> -
> -.globl .gcm_gmult_p8
> - lis r0,0xfff8
> - li r8,0x10
> - mfspr $vrsave,256
> - li r9,0x20
> - mtspr 256,r0
> - li r10,0x30
> - lvx_u $IN,0,$Xip # load Xi
> -
> - lvx_u $Hl,r8,$Htbl # load pre-computed table
> - le?lvsl $lemask,r0,r0
> - lvx_u $H, r9,$Htbl
> - le?vspltisb $t0,0x07
> - lvx_u $Hh,r10,$Htbl
> - le?vxor $lemask,$lemask,$t0
> - lvx_u $xC2,0,$Htbl
> - le?vperm $IN,$IN,$IN,$lemask
> - vxor $zero,$zero,$zero
> -
> - vpmsumd $Xl,$IN,$Hl # H.loïXi.lo
> - vpmsumd $Xm,$IN,$H # H.hiïXi.lo+H.loïXi.hi
> - vpmsumd $Xh,$IN,$Hh # H.hiïXi.hi
> -
> - vpmsumd $t2,$Xl,$xC2 # 1st phase
> -
> - vsldoi $t0,$Xm,$zero,8
> - vsldoi $t1,$zero,$Xm,8
> - vxor $Xl,$Xl,$t0
> - vxor $Xh,$Xh,$t1
> -
> - vsldoi $Xl,$Xl,$Xl,8
> - vxor $Xl,$Xl,$t2
> -
> - vsldoi $t1,$Xl,$Xl,8 # 2nd phase
> - vpmsumd $Xl,$Xl,$xC2
> - vxor $t1,$t1,$Xh
> - vxor $Xl,$Xl,$t1
> -
> - le?vperm $Xl,$Xl,$Xl,$lemask
> - stvx_u $Xl,0,$Xip # write out Xi
> -
> - mtspr 256,$vrsave
> - blr
> - .long 0
> - .byte 0,12,0x14,0,0,0,2,0
> - .long 0
> -.size .gcm_gmult_p8,.-.gcm_gmult_p8
> -
> -.globl .gcm_ghash_p8
> - lis r0,0xfff8
> - li r8,0x10
> - mfspr $vrsave,256
> - li r9,0x20
> - mtspr 256,r0
> - li r10,0x30
> - lvx_u $Xl,0,$Xip # load Xi
> -
> - lvx_u $Hl,r8,$Htbl # load pre-computed table
> - le?lvsl $lemask,r0,r0
> - lvx_u $H, r9,$Htbl
> - le?vspltisb $t0,0x07
> - lvx_u $Hh,r10,$Htbl
> - le?vxor $lemask,$lemask,$t0
> - lvx_u $xC2,0,$Htbl
> - le?vperm $Xl,$Xl,$Xl,$lemask
> - vxor $zero,$zero,$zero
> -
> - lvx_u $IN,0,$inp
> - addi $inp,$inp,16
> - subi $len,$len,16
> - le?vperm $IN,$IN,$IN,$lemask
> - vxor $IN,$IN,$Xl
> - b Loop
> -
> -.align 5
> -Loop:
> - subic $len,$len,16
> - vpmsumd $Xl,$IN,$Hl # H.loïXi.lo
> - subfe. r0,r0,r0 # borrow?-1:0
> - vpmsumd $Xm,$IN,$H # H.hiïXi.lo+H.loïXi.hi
> - and r0,r0,$len
> - vpmsumd $Xh,$IN,$Hh # H.hiïXi.hi
> - add $inp,$inp,r0
> -
> - vpmsumd $t2,$Xl,$xC2 # 1st phase
> -
> - vsldoi $t0,$Xm,$zero,8
> - vsldoi $t1,$zero,$Xm,8
> - vxor $Xl,$Xl,$t0
> - vxor $Xh,$Xh,$t1
> -
> - vsldoi $Xl,$Xl,$Xl,8
> - vxor $Xl,$Xl,$t2
> - lvx_u $IN,0,$inp
> - addi $inp,$inp,16
> -
> - vsldoi $t1,$Xl,$Xl,8 # 2nd phase
> - vpmsumd $Xl,$Xl,$xC2
> - le?vperm $IN,$IN,$IN,$lemask
> - vxor $t1,$t1,$Xh
> - vxor $IN,$IN,$t1
> - vxor $IN,$IN,$Xl
> - beq Loop # did $len-=16 borrow?
> -
> - vxor $Xl,$Xl,$t1
> - le?vperm $Xl,$Xl,$Xl,$lemask
> - stvx_u $Xl,0,$Xip # write out Xi
> -
> - mtspr 256,$vrsave
> - blr
> - .long 0
> - .byte 0,12,0x14,0,0,0,4,0
> - .long 0
> -.size .gcm_ghash_p8,.-.gcm_ghash_p8
> -
> -.asciz "GHASH for PowerISA 2.07, CRYPTOGAMS by <appro\@openssl.org>"
> -.align 2
> -___
> -
> -foreach (split("\n",$code)) {
> - if ($flavour =~ /le$/o) { # little-endian
> - s/le\?//o or
> - s/be\?/#be#/o;
> - } else {
> - s/le\?/#le#/o or
> - s/be\?//o;
> - }
> - print $_,"\n";
> -}
> -
> -close STDOUT; # enforce flush
> diff --git a/drivers/crypto/vmx/ppc-xlate.pl b/drivers/crypto/vmx/ppc-xlate.pl
> deleted file mode 100644
> index b18e67d0e065..000000000000
> --- a/drivers/crypto/vmx/ppc-xlate.pl
> +++ /dev/null
> @@ -1,228 +0,0 @@
> -#!/usr/bin/env perl
> -
> -# PowerPC assembler distiller by <appro>.
> -
> -my $flavour = shift;
> -my $output = shift;
> -open STDOUT,">$output" || die "can't open $output: $!";
> -
> -my %GLOBALS;
> -my $dotinlocallabels=($flavour=~/linux/)?1:0;
> -
> -################################################################
> -# directives which need special treatment on different platforms
> -################################################################
> -my $globl = sub {
> - my $junk = shift;
> - my $name = shift;
> - my $global = \$GLOBALS{$name};
> - my $ret;
> -
> - $name =~ s|^[\.\_]||;
> -
> - SWITCH: for ($flavour) {
> - /aix/ && do { $name = ".$name";
> - last;
> - };
> - /osx/ && do { $name = "_$name";
> - last;
> - };
> - /linux/
> - && do { $ret = "_GLOBAL($name)";
> - last;
> - };
> - }
> -
> - $ret = ".globl $name\nalign 5\n$name:" if (!$ret);
> - $$global = $name;
> - $ret;
> -};
> -my $text = sub {
> - my $ret = ($flavour =~ /aix/) ? ".csect\t.text[PR],7" : ".text";
> - $ret = ".abiversion 2\n".$ret if ($flavour =~ /linux.*64le/);
> - $ret;
> -};
> -my $machine = sub {
> - my $junk = shift;
> - my $arch = shift;
> - if ($flavour =~ /osx/)
> - { $arch =~ s/\"//g;
> - $arch = ($flavour=~/64/) ? "ppc970-64" : "ppc970" if ($arch eq "any");
> - }
> - ".machine $arch";
> -};
> -my $size = sub {
> - if ($flavour =~ /linux/)
> - { shift;
> - my $name = shift; $name =~ s|^[\.\_]||;
> - my $ret = ".size $name,.-".($flavour=~/64$/?".":"").$name;
> - $ret .= "\n.size .$name,.-.$name" if ($flavour=~/64$/);
> - $ret;
> - }
> - else
> - { ""; }
> -};
> -my $asciz = sub {
> - shift;
> - my $line = join(",",@_);
> - if ($line =~ /^"(.*)"$/)
> - { ".byte " . join(",",unpack("C*",$1),0) . "\n.align 2"; }
> - else
> - { ""; }
> -};
> -my $quad = sub {
> - shift;
> - my @ret;
> - my ($hi,$lo);
> - for (@_) {
> - if (/^0x([0-9a-f]*?)([0-9a-f]{1,8})$/io)
> - { $hi=$1?"0x$1":"0"; $lo="0x$2"; }
> - elsif (/^([0-9]+)$/o)
> - { $hi=$1>>32; $lo=$1&0xffffffff; } # error-prone with 32-bit perl
> - else
> - { $hi=undef; $lo=$_; }
> -
> - if (defined($hi))
> - { push(@ret,$flavour=~/le$/o?".long\t$lo,$hi":".long\t$hi,$lo"); }
> - else
> - { push(@ret,".quad $lo"); }
> - }
> - join("\n",@ret);
> -};
> -
> -################################################################
> -# simplified mnemonics not handled by at least one assembler
> -################################################################
> -my $cmplw = sub {
> - my $f = shift;
> - my $cr = 0; $cr = shift if ($#_>1);
> - # Some out-of-date 32-bit GNU assembler just can't handle cmplw...
> - ($flavour =~ /linux.*32/) ?
> - " .long ".sprintf "0x%x",31<<26|$cr<<23|$_[0]<<16|$_[1]<<11|64 :
> - " cmplw ".join(',',$cr,@_);
> -};
> -my $bdnz = sub {
> - my $f = shift;
> - my $bo = $f=~/[\+\-]/ ? 16+9 : 16; # optional "to be taken" hint
> - " bc $bo,0,".shift;
> -} if ($flavour!~/linux/);
> -my $bltlr = sub {
> - my $f = shift;
> - my $bo = $f=~/\-/ ? 12+2 : 12; # optional "not to be taken" hint
> - ($flavour =~ /linux/) ? # GNU as doesn't allow most recent hints
> - " .long ".sprintf "0x%x",19<<26|$bo<<21|16<<1 :
> - " bclr $bo,0";
> -};
> -my $bnelr = sub {
> - my $f = shift;
> - my $bo = $f=~/\-/ ? 4+2 : 4; # optional "not to be taken" hint
> - ($flavour =~ /linux/) ? # GNU as doesn't allow most recent hints
> - " .long ".sprintf "0x%x",19<<26|$bo<<21|2<<16|16<<1 :
> - " bclr $bo,2";
> -};
> -my $beqlr = sub {
> - my $f = shift;
> - my $bo = $f=~/-/ ? 12+2 : 12; # optional "not to be taken" hint
> - ($flavour =~ /linux/) ? # GNU as doesn't allow most recent hints
> - " .long ".sprintf "0x%X",19<<26|$bo<<21|2<<16|16<<1 :
> - " bclr $bo,2";
> -};
> -# GNU assembler can't handle extrdi rA,rS,16,48, or when sum of last two
> -# arguments is 64, with "operand out of range" error.
> -my $extrdi = sub {
> - my ($f,$ra,$rs,$n,$b) = @_;
> - $b = ($b+$n)&63; $n = 64-$n;
> - " rldicl $ra,$rs,$b,$n";
> -};
> -my $vmr = sub {
> - my ($f,$vx,$vy) = @_;
> - " vor $vx,$vy,$vy";
> -};
> -
> -# Some ABIs specify vrsave, special-purpose register #256, as reserved
> -# for system use.
> -my $no_vrsave = ($flavour =~ /linux-ppc64le/);
> -my $mtspr = sub {
> - my ($f,$idx,$ra) = @_;
> - if ($idx == 256 && $no_vrsave) {
> - " or $ra,$ra,$ra";
> - } else {
> - " mtspr $idx,$ra";
> - }
> -};
> -my $mfspr = sub {
> - my ($f,$rd,$idx) = @_;
> - if ($idx == 256 && $no_vrsave) {
> - " li $rd,-1";
> - } else {
> - " mfspr $rd,$idx";
> - }
> -};
> -
> -# PowerISA 2.06 stuff
> -sub vsxmem_op {
> - my ($f, $vrt, $ra, $rb, $op) = @_;
> - " .long ".sprintf "0x%X",(31<<26)|($vrt<<21)|($ra<<16)|($rb<<11)|($op*2+1);
> -}
> -# made-up unaligned memory reference AltiVec/VMX instructions
> -my $lvx_u = sub { vsxmem_op(@_, 844); }; # lxvd2x
> -my $stvx_u = sub { vsxmem_op(@_, 972); }; # stxvd2x
> -my $lvdx_u = sub { vsxmem_op(@_, 588); }; # lxsdx
> -my $stvdx_u = sub { vsxmem_op(@_, 716); }; # stxsdx
> -my $lvx_4w = sub { vsxmem_op(@_, 780); }; # lxvw4x
> -my $stvx_4w = sub { vsxmem_op(@_, 908); }; # stxvw4x
> -
> -# PowerISA 2.07 stuff
> -sub vcrypto_op {
> - my ($f, $vrt, $vra, $vrb, $op) = @_;
> - " .long ".sprintf "0x%X",(4<<26)|($vrt<<21)|($vra<<16)|($vrb<<11)|$op;
> -}
> -my $vcipher = sub { vcrypto_op(@_, 1288); };
> -my $vcipherlast = sub { vcrypto_op(@_, 1289); };
> -my $vncipher = sub { vcrypto_op(@_, 1352); };
> -my $vncipherlast= sub { vcrypto_op(@_, 1353); };
> -my $vsbox = sub { vcrypto_op(@_, 0, 1480); };
> -my $vshasigmad = sub { my ($st,$six)=splice(@_,-2); vcrypto_op(@_, $st<<4|$six, 1730); };
> -my $vshasigmaw = sub { my ($st,$six)=splice(@_,-2); vcrypto_op(@_, $st<<4|$six, 1666); };
> -my $vpmsumb = sub { vcrypto_op(@_, 1032); };
> -my $vpmsumd = sub { vcrypto_op(@_, 1224); };
> -my $vpmsubh = sub { vcrypto_op(@_, 1096); };
> -my $vpmsumw = sub { vcrypto_op(@_, 1160); };
> -my $vaddudm = sub { vcrypto_op(@_, 192); };
> -my $vadduqm = sub { vcrypto_op(@_, 256); };
> -
> -my $mtsle = sub {
> - my ($f, $arg) = @_;
> - " .long ".sprintf "0x%X",(31<<26)|($arg<<21)|(147*2);
> -};
> -
> -print "#include <asm/ppc_asm.h>\n" if $flavour =~ /linux/;
> -
> -while($line=<>) {
> -
> - $line =~ s|[#!;].*$||; # get rid of asm-style comments...
> - $line =~ s|/\*.*\*/||; # ... and C-style comments...
> - $line =~ s|^\s+||; # ... and skip white spaces in beginning...
> - $line =~ s|\s+$||; # ... and at the end
> -
> - {
> - $line =~ s|\b\.L(\w+)|L$1|g; # common denominator for Locallabel
> - $line =~ s|\bL(\w+)|\.L$1|g if ($dotinlocallabels);
> - }
> -
> - {
> - $line =~ s|^\s*(\.?)(\w+)([\.\+\-]?)\s*||;
> - my $c = $1; $c = "\t" if ($c eq "");
> - my $mnemonic = $2;
> - my $f = $3;
> - my $opcode = eval("\$$mnemonic");
> - $line =~ s/\b(c?[rf]|v|vs)([0-9]+)\b/$2/g if ($c ne "." and $flavour !~ /osx/);
> - if (ref($opcode) eq 'CODE') { $line = &$opcode($f,split(',',$line)); }
> - elsif ($mnemonic) { $line = $c.$mnemonic.$f."\t".$line; }
> - }
> -
> - print $line if ($line);
> - print "\n";
> -}
> -
> -close STDOUT;
> diff --git a/drivers/crypto/vmx/vmx.c b/drivers/crypto/vmx/vmx.c
> deleted file mode 100644
> index 31a98dc6f849..000000000000
> --- a/drivers/crypto/vmx/vmx.c
> +++ /dev/null
> @@ -1,88 +0,0 @@
> -/**
> - * Routines supporting VMX instructions on the Power 8
> - *
> - * Copyright (C) 2015 International Business Machines Inc.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; version 2 only.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> - *
> - * Author: Marcelo Henrique Cerri <mhcerri@xxxxxxxxxx>
> - */
> -
> -#include <linux/module.h>
> -#include <linux/moduleparam.h>
> -#include <linux/types.h>
> -#include <linux/err.h>
> -#include <linux/cpufeature.h>
> -#include <linux/crypto.h>
> -#include <asm/cputable.h>
> -#include <crypto/internal/hash.h>
> -
> -extern struct shash_alg p8_ghash_alg;
> -extern struct crypto_alg p8_aes_alg;
> -extern struct crypto_alg p8_aes_cbc_alg;
> -extern struct crypto_alg p8_aes_ctr_alg;
> -extern struct crypto_alg p8_aes_xts_alg;
> -static struct crypto_alg *algs[] = {
> - &p8_aes_alg,
> - &p8_aes_cbc_alg,
> - &p8_aes_ctr_alg,
> - &p8_aes_xts_alg,
> - NULL,
> -};
> -
> -int __init p8_init(void)
> -{
> - int ret = 0;
> - struct crypto_alg **alg_it;
> -
> - for (alg_it = algs; *alg_it; alg_it++) {
> - ret = crypto_register_alg(*alg_it);
> - printk(KERN_INFO "crypto_register_alg '%s' = %d\n",
> - (*alg_it)->cra_name, ret);
> - if (ret) {
> - for (alg_it--; alg_it >= algs; alg_it--)
> - crypto_unregister_alg(*alg_it);
> - break;
> - }
> - }
> - if (ret)
> - return ret;
> -
> - ret = crypto_register_shash(&p8_ghash_alg);
> - if (ret) {
> - for (alg_it = algs; *alg_it; alg_it++)
> - crypto_unregister_alg(*alg_it);
> - }
> - return ret;
> -}
> -
> -void __exit p8_exit(void)
> -{
> - struct crypto_alg **alg_it;
> -
> - for (alg_it = algs; *alg_it; alg_it++) {
> - printk(KERN_INFO "Removing '%s'\n", (*alg_it)->cra_name);
> - crypto_unregister_alg(*alg_it);
> - }
> - crypto_unregister_shash(&p8_ghash_alg);
> -}
> -
> -module_cpu_feature_match(PPC_MODULE_FEATURE_VEC_CRYPTO, p8_init);
> -module_exit(p8_exit);
> -
> -MODULE_AUTHOR("Marcelo Cerri<mhcerri@xxxxxxxxxx>");
> -MODULE_DESCRIPTION("IBM VMX cryptographic acceleration instructions "
> - "support on Power 8");
> -MODULE_LICENSE("GPL");
> -MODULE_VERSION("1.0.0");
>