[PATCH] mfd: stmpe: Fix bit clearing on STMPE1600

[Hugues Fruchet]

GPIO bits clearing on pins assigned to STMPE1600
had no effects due to missing "clear registers"
settings within stmpe1600_regs[].
STMPE1600 does not have dedicated "clear registers",
but single "set/clear registers", hence stmpe1600_regs[]
"clear registers" (STMPE_IDX_GPCR_XXX) must be set to
same value as "set registers" (STMPE_IDX_GPSR_XXX), ie
STMPE1600_REG_GPSR_XXX.

Signed-off-by: Hugues Fruchet <hugues.fruchet@xxxxxx>
---
 drivers/mfd/stmpe.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index b0c7bcd..566caca 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -568,6 +568,8 @@ static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
 	[STMPE_IDX_GPMR_CSB]	= STMPE1600_REG_GPMR_MSB,
 	[STMPE_IDX_GPSR_LSB]	= STMPE1600_REG_GPSR_LSB,
 	[STMPE_IDX_GPSR_CSB]	= STMPE1600_REG_GPSR_MSB,
+	[STMPE_IDX_GPCR_LSB]	= STMPE1600_REG_GPSR_LSB,
+	[STMPE_IDX_GPCR_CSB]	= STMPE1600_REG_GPSR_MSB,
 	[STMPE_IDX_GPDR_LSB]	= STMPE1600_REG_GPDR_LSB,
 	[STMPE_IDX_GPDR_CSB]	= STMPE1600_REG_GPDR_MSB,
 	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1600_REG_IEGPIOR_LSB,
-- 
1.9.1