Re: [PATCH v2 4/4] usb: dwc3: Workaround for super-speed host on dra7 in dual-role mode

[Roger Quadros]

+Mathias

On 31/03/17 10:46, Felipe Balbi wrote:
> 
> Hi,
> 
> Roger Quadros <rogerq@xxxxxx> writes:
>>>>> Roger Quadros <rogerq@xxxxxx> writes:
>>>>>> dra7 OTG core limits the host controller to USB2.0 (high-speed) mode
>>>>>> when we're operating in dual-role.
>>>>>
>>>>> yeah, that's not a quirk. DRA7 supports OTGv2, not OTGv3. There was no
>>>>> USB3 when OTGv2 was written.
>>>>>
>>>>> DRA7 just shouldn't use OTG core altogether. In fact, this is the very
>>>>> thing I've been saying for a long time. Make the simplest implementation
>>>>> possible. The dead simple, does-one-thing-only sort of implementation.
>>>>>
>>>>> All we need for Dual-Role (without OTG extras) is some input for ID and
>>>>> VBUS, then we add/remove HCD/UDC conditionally and set PRTCAPDIR.
>>>>>
>>>>
>>>> The catch is that on AM437x there is no way to get ID and VBUS events other
>>>> than the OTG controller so we have to rely on the OTG controller for that. :(
>>>
>>> okay, so AM437x can get OTG interrupts properly. That's fine. We can
>>> still do everything we need using code that's already existing in dwc3
>>> if we refactor it a bit and hook it up to the OTG IRQ handler.
>>>
>>> Here's what we do:
>>>
>>> * First we re-factor all necessary code around so the API for OTG/DRD
>>>   is resumed to calling:
>>>
>>> 	dwc3_add_udc(dwc);
>>>         dwc3_del_udc(dwc);
>>>         dwc3_add_hcd(dwc);
>>>         dwc3_del_hcd(dwc);
>>
>> Why do we need these new APIs? don't these suffice?
>> 	dwc3_gadget_init(dwc);
>> 	dwc3_gadget_exit(dwc);
>> 	dwc3_host_init(dwc);
>> 	dwc3_host_exit(dwc);
> 
> well, if they do what we want, sure. They suffice.
> 
>>> the semantics of these should be easy to understand and you can
>>> implement each in their respective host.c/gadget.c files.
>>>
>>> * Second step is to modify our dwc3_init_mode() (or whatever that
>>>   function was called, sorry, didn't check) to make sure we have
>>>   something like:
>>>
>>> 	case OTG:
>>>         	dwc3_add_udc(dwc);
>>>                 break;
>>>
>>> We should *not* add HCD in this case yet.
>>>
>>> * After that we add otg.c (or drd.c, no preference) and make that call
>>>   dwc3_add_udc(dwc) and, also, provide
>>>   dwc3_add_otg(dwc)/dwc3_del_otg(dwc) calls. Then patch the switch
>>>   statement above to:
>>>
>>> 	case OTG:
>>>         	dwc3_add_otg(dwc);
>>>                 break;
>>>
>>> Note that at this point, this is simply a direct replacement of
>>> dwc3_add_udc() to dwc3_add_otg(). This should maintain current behavior
>>> (which is starting with peripheral mode by default), but it should also
>>> add support for OTG interrupts to change the mode (from an interrupt
>>> thead)
>>>
>>> 	otg_isr()
>>>         {
>>>
>>> 		/* don't forget to remove preivous mode if necessary */
>>>         	if (perimode)
>>>                 	dwc3_add_udc(dwc);
>>>                 else
>>>                 	dwc3_add_hcd(dwc);
>>> 	}
>>>
>>> * The next patch would be to choose default conditionally based on
>>>   PERIMODE or whatever.
>>>
>>> Of course, this is an oversimplified view of reality. You still need to
>>> poke around at PRTCAPDIR, etc. But all this can, actually, be prototyped
>>> using our "mode" debugfs file. Just make that call
>>> dwc3_add/del_udc/hcd() apart from fiddling with PRTCAPDIR in GCTL.
>>
>> We also need to ensure that system suspend/resume doesn't break.
>> Mainly if we suspend/resume with UDC removed.
> 
> right, why would it break in that case? I'm missing something...
> 
>>> Your first implementation could be just that. Refactoring what needs to
>>> be refactored, then patching "mode" debugfs to work properly in that
>>> case. Only add otg.c/drd.c after "mode" debugfs file is stable, because
>>> then you know what needs to be taken into consideration.
>>>
>>> Just to be clear, I'm not saying we should *ONLY* get the debugfs
>>> interface for v4.12, I'm saying you should start with that and get that
>>> stable and working properly (make an infinite loop constantly changing
>>> modes and keep it running over the weekend) before you add support for
>>> OTG interrupts, which could come in the same series ;-)
>>>
>>
>> Just to clarify debugfs mode behaviour.
>>
>> Currently it is just changing PRTCAPDIR. What we need to do is that if
>> dr_mode == "otg", then we call dwc3_host/gadget_init/exit() accordingly as well.
>>
>> Does this make sense?
> 
> it does.
> 

OK. Below is a patch that allows us to use debugfs/mode to do the role switch.
Switching from device to host worked fine but I get the following error when
switching from host to device.

https://hastebin.com/liluqosewe.xml

cheers,
-roger

---