Re: [PATCH V10 07/12] of/acpi: Configure dma operations at probe time for platform/amba/pci bus devices

From: Sricharan R
Date: Tue Apr 04 2017 - 08:30:58 EST

Hi Robin,

On 4/4/2017 5:47 PM, Robin Murphy wrote:
On 04/04/17 11:18, Sricharan R wrote:
Configuring DMA ops at probe time will allow deferring device probe when
the IOMMU isn't available yet. The dma_configure for the device is
now called from the generic device_attach callback just before the
bus/driver probe is called. This way, configuring the DMA ops for the
device would be called at the same place for all bus_types, hence the
deferred probing mechanism should work for all buses as well.

pci_bus_add_devices (platform/amba)(_device_create/driver_register)
| |
pci_bus_add_device (device_add/driver_register)
| |
device_attach device_initial_probe
| |
__device_attach_driver __device_attach_driver
|
driver_probe_device
|
really_probe
|
dma_configure

Similarly on the device/driver_unregister path __device_release_driver is
called which inturn calls dma_deconfigure.

This patch changes the dma ops configuration to probe time for
both OF and ACPI based platform/amba/pci bus devices.

Reviewed-by: Robin Murphy <robin.murphy@xxxxxxx>

It's possible we could subsume {of,acpi}_dma_deconfigure() into
dma_deconfigure() entirely in future if it becomes clear that neither of
them will ever need to do anything firmware-specific, but I think for
now it's probably safer to keep the current symmetry - calling
arch_teardown_dma_ops() twice is benign (and even if it weren't, I'd say
it really should be!)


Ya, calling it twice should cause no harm. If nothing firmware specific
gets added this could simply be put in deconfigure itself in future.
Thanks for all the reviews !!

Regards,
Sricharan



Robin.

Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Tested-by: Hanjun Guo <hanjun.guo@xxxxxxxxxx>
Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> (drivers/pci part)
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
---

[V10] Added dummy dma_(de)configure functions in case
of !CONFIG_HAS_DMA to avoid build breaks.

drivers/acpi/glue.c | 5 -----
drivers/base/dd.c | 9 +++++++++
drivers/base/dma-mapping.c | 40 ++++++++++++++++++++++++++++++++++++++++
drivers/of/platform.c | 5 +----
drivers/pci/probe.c | 28 ----------------------------
include/linux/dma-mapping.h | 12 ++++++++++++
6 files changed, 62 insertions(+), 37 deletions(-)

diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index fb19e1c..c05f241 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -176,7 +176,6 @@ int acpi_bind_one(struct device *dev, struct acpi_device *acpi_dev)
struct list_head *physnode_list;
unsigned int node_id;
int retval = -EINVAL;
- enum dev_dma_attr attr;

if (has_acpi_companion(dev)) {
if (acpi_dev) {
@@ -233,10 +232,6 @@ int acpi_bind_one(struct device *dev, struct acpi_device *acpi_dev)
if (!has_acpi_companion(dev))
ACPI_COMPANION_SET(dev, acpi_dev);

- attr = acpi_get_dma_attr(acpi_dev);
- if (attr != DEV_DMA_NOT_SUPPORTED)
- acpi_dma_configure(dev, attr);
-
acpi_physnode_link_name(physical_node_name, node_id);
retval = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj,
physical_node_name);
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index a1fbf55..4882f06 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -19,6 +19,7 @@

#include <linux/device.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/kthread.h>
#include <linux/wait.h>
@@ -356,6 +357,10 @@ static int really_probe(struct device *dev, struct device_driver *drv)
if (ret)
goto pinctrl_bind_failed;

+ ret = dma_configure(dev);
+ if (ret)
+ goto dma_failed;
+
if (driver_sysfs_add(dev)) {
printk(KERN_ERR "%s: driver_sysfs_add(%s) failed\n",
__func__, dev_name(dev));
@@ -417,6 +422,8 @@ static int really_probe(struct device *dev, struct device_driver *drv)
goto done;

probe_failed:
+ dma_deconfigure(dev);
+dma_failed:
if (dev->bus)
blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
BUS_NOTIFY_DRIVER_NOT_BOUND, dev);
@@ -826,6 +833,8 @@ static void __device_release_driver(struct device *dev, struct device *parent)
drv->remove(dev);

device_links_driver_cleanup(dev);
+ dma_deconfigure(dev);
+
devres_release_all(dev);
dev->driver = NULL;
dev_set_drvdata(dev, NULL);
diff --git a/drivers/base/dma-mapping.c b/drivers/base/dma-mapping.c
index efd71cf..449b948 100644
--- a/drivers/base/dma-mapping.c
+++ b/drivers/base/dma-mapping.c
@@ -7,9 +7,11 @@
* This file is released under the GPLv2.
*/

+#include <linux/acpi.h>
#include <linux/dma-mapping.h>
#include <linux/export.h>
#include <linux/gfp.h>
+#include <linux/of_device.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>

@@ -341,3 +343,41 @@ void dma_common_free_remap(void *cpu_addr, size_t size, unsigned long vm_flags)
vunmap(cpu_addr);
}
#endif
+
+/*
+ * Common configuration to enable DMA API use for a device
+ */
+#include <linux/pci.h>
+
+int dma_configure(struct device *dev)
+{
+ struct device *bridge = NULL, *dma_dev = dev;
+ enum dev_dma_attr attr;
+
+ if (dev_is_pci(dev)) {
+ bridge = pci_get_host_bridge_device(to_pci_dev(dev));
+ dma_dev = bridge;
+ if (IS_ENABLED(CONFIG_OF) && dma_dev->parent &&
+ dma_dev->parent->of_node)
+ dma_dev = dma_dev->parent;
+ }
+
+ if (dma_dev->of_node) {
+ of_dma_configure(dev, dma_dev->of_node);
+ } else if (has_acpi_companion(dma_dev)) {
+ attr = acpi_get_dma_attr(to_acpi_device_node(dma_dev->fwnode));
+ if (attr != DEV_DMA_NOT_SUPPORTED)
+ acpi_dma_configure(dev, attr);
+ }
+
+ if (bridge)
+ pci_put_host_bridge_device(bridge);
+
+ return 0;
+}
+
+void dma_deconfigure(struct device *dev)
+{
+ of_dma_deconfigure(dev);
+ acpi_dma_deconfigure(dev);
+}
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 5344db5..2aa4ebb 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -22,6 +22,7 @@
#include <linux/slab.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/of_iommu.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
@@ -186,11 +187,9 @@ static struct platform_device *of_platform_device_create_pdata(

dev->dev.bus = &platform_bus_type;
dev->dev.platform_data = platform_data;
- of_dma_configure(&dev->dev, dev->dev.of_node);
of_msi_configure(&dev->dev, dev->dev.of_node);

if (of_device_add(dev) != 0) {
- of_dma_deconfigure(&dev->dev);
platform_device_put(dev);
goto err_clear_flag;
}
@@ -248,7 +247,6 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
dev_set_name(&dev->dev, "%s", bus_id);
else
of_device_make_bus_id(&dev->dev);
- of_dma_configure(&dev->dev, dev->dev.of_node);

/* Allow the HW Peripheral ID to be overridden */
prop = of_get_property(node, "arm,primecell-periphid", NULL);
@@ -542,7 +540,6 @@ static int of_platform_device_destroy(struct device *dev, void *data)
amba_device_unregister(to_amba_device(dev));
#endif

- of_dma_deconfigure(dev);
of_node_clear_flag(dev->of_node, OF_POPULATED);
of_node_clear_flag(dev->of_node, OF_POPULATED_BUS);
return 0;
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index dfc9a27..5a8dd43 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1893,33 +1893,6 @@ static void pci_set_msi_domain(struct pci_dev *dev)
dev_set_msi_domain(&dev->dev, d);
}

-/**
- * pci_dma_configure - Setup DMA configuration
- * @dev: ptr to pci_dev struct of the PCI device
- *
- * Function to update PCI devices's DMA configuration using the same
- * info from the OF node or ACPI node of host bridge's parent (if any).
- */
-static void pci_dma_configure(struct pci_dev *dev)
-{
- struct device *bridge = pci_get_host_bridge_device(dev);
-
- if (IS_ENABLED(CONFIG_OF) &&
- bridge->parent && bridge->parent->of_node) {
- of_dma_configure(&dev->dev, bridge->parent->of_node);
- } else if (has_acpi_companion(bridge)) {
- struct acpi_device *adev = to_acpi_device_node(bridge->fwnode);
- enum dev_dma_attr attr = acpi_get_dma_attr(adev);
-
- if (attr == DEV_DMA_NOT_SUPPORTED)
- dev_warn(&dev->dev, "DMA not supported.\n");
- else
- acpi_dma_configure(&dev->dev, attr);
- }
-
- pci_put_host_bridge_device(bridge);
-}
-
void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
{
int ret;
@@ -1933,7 +1906,6 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
dev->dev.dma_mask = &dev->dma_mask;
dev->dev.dma_parms = &dev->dma_parms;
dev->dev.coherent_dma_mask = 0xffffffffull;
- pci_dma_configure(dev);

pci_set_dma_max_seg_size(dev, 65536);
pci_set_dma_seg_boundary(dev, 0xffffffff);
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 0977317..4f3eece 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -728,6 +728,18 @@ void *dma_mark_declared_memory_occupied(struct device *dev,
}
#endif /* CONFIG_HAVE_GENERIC_DMA_COHERENT */

+#ifdef CONFIG_HAS_DMA
+int dma_configure(struct device *dev);
+void dma_deconfigure(struct device *dev);
+#else
+static inline int dma_configure(struct device *dev)
+{
+ return 0;
+}
+
+static inline void dma_deconfigure(struct device *dev) {}
+#endif
+
/*
* Managed DMA API
*/


--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html


--
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation