Re: [PATCH v2 5/9] drm/rockchip: vop: Enable pm domain when resetting vop

From: jeffy
Date: Wed Apr 05 2017 - 06:26:10 EST


Hi Sean,

On 04/05/2017 03:42 AM, Sean Paul wrote:
On Sat, Apr 01, 2017 at 07:35:25PM +0800, Jeffy Chen wrote:

Hi Jeffy,
Could you please add commit messages describing *why* you're making the change?
It might be obvious to you (and maybe me), but others will benefit from better
descriptions.
ok, will do.

Signed-off-by: Jeffy Chen <jeffy.chen@xxxxxxxxxxxxxx>
---

Changes in v2: None

drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 31 +++++++++++++++++++----------
1 file changed, 21 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 76c79ac..1d85319 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1365,6 +1365,12 @@ static int vop_initial(struct vop *vop)
return ret;
}

+ ret = pm_runtime_get_sync(vop->dev);
+ if (ret < 0) {
+ dev_err(vop->dev, "failed to get pm runtime: %d\n", ret);
+ goto err_put_pm_runtime;

This should go to err_unprepare_dclk, the next error condition should go to
err_put_pm_runtime
hmm, that's true, i copied it from vop_enable without a double check...will fix that too.

+ }
+
/* Enable both the hclk and aclk to setup the vop */
ret = clk_prepare_enable(vop->hclk);
if (ret < 0) {
@@ -1422,6 +1428,8 @@ static int vop_initial(struct vop *vop)

vop->is_enabled = false;

+ pm_runtime_put_sync(vop->dev);
+
return 0;

err_disable_aclk:
@@ -1430,6 +1438,8 @@ static int vop_initial(struct vop *vop)
clk_disable_unprepare(vop->hclk);
err_unprepare_dclk:
clk_unprepare(vop->dclk);
+err_put_pm_runtime:
+ pm_runtime_put_sync(vop->dev);

Should be above err_unprepare_dclk

oh, too careless, thanx for pointing that out.
return ret;
}

@@ -1530,12 +1540,6 @@ static int vop_bind(struct device *dev, struct device *master, void *data)
if (!vop->regsbak)
return -ENOMEM;

- ret = vop_initial(vop);
- if (ret < 0) {
- dev_err(&pdev->dev, "cannot initial vop dev - err %d\n", ret);
- return ret;
- }
-
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(dev, "cannot find irq for vop\n");
@@ -1556,15 +1560,22 @@ static int vop_bind(struct device *dev, struct device *master, void *data)
/* IRQ is initially disabled; it gets enabled in power_on */
disable_irq(vop->irq);

+ pm_runtime_enable(&pdev->dev);
+
+ ret = vop_initial(vop);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot initial vop dev - err %d\n", ret);
+ goto err_disable_pm_runtime;
+ }

This function move would be a lot easier to understand with a commit message ;-)

ok
+
ret = vop_create_crtc(vop);
if (ret)
- goto err_enable_irq;
-
- pm_runtime_enable(&pdev->dev);
+ goto err_disable_pm_runtime;

Do you have anything to clean up from vop_initial()?

i'll put it to the end of bind ;)

return 0;

-err_enable_irq:
+err_disable_pm_runtime:
+ pm_runtime_disable(&pdev->dev);
enable_irq(vop->irq); /* To balance out the disable_irq above */
return ret;
}
--
2.1.4