Re: [PATCH v4 6/8] ARM: sun8i: a33: add CPU thermal throttling

[Maxime Ripard]

On Wed, Apr 05, 2017 at 11:06:32AM +0200, Quentin Schulz wrote:
> This adds CPU thermal throttling for the Allwinner A33. It uses the
> thermal sensor present in the SoC's GPADC.
> 
> Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
> ---
> 
> v3:
>   - switched to new phandle because of modified DT node name for the GPADC
>   (named THS),
>   - got rid of cooling-min-level and cooling-max-level as it's not used in any
>   code in the kernel,
> 
> v2:
>   - updated cooling-max-level to reflect newly added OPPs,
> 
>  arch/arm/boot/dts/sun8i-a33.dtsi | 45 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 45 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
> index 9734e63..b88c107 100644
> --- a/arch/arm/boot/dts/sun8i-a33.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a33.dtsi
> @@ -43,6 +43,7 @@
>   */
>  
>  #include "sun8i-a23-a33.dtsi"
> +#include <dt-bindings/thermal/thermal.h>
>  
>  / {
>  	cpu0_opp_table: opp_table0 {
> @@ -127,6 +128,7 @@
>  			clocks = <&ccu CLK_CPUX>;
>  			clock-names = "cpu";
>  			operating-points-v2 = <&cpu0_opp_table>;
> +			#cooling-cells = <2>;
>  		};
>  
>  		cpu@1 {
> @@ -170,6 +172,49 @@
>  		};
>  	};
>  
> +	thermal-zones {
> +		cpu_thermal {
> +			/* milliseconds */
> +			polling-delay-passive = <250>;
> +			polling-delay = <1000>;
> +			thermal-sensors = <&ths>;
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu_alert0>;
> +					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +				map1 {
> +					trip = <&cpu_alert1>;
> +					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
> +
> +			trips {
> +				cpu_alert0: cpu_alert0 {
> +					/* milliCelsius */
> +					temperature = <75000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu_alert1: cpu_alert1 {
> +					/* milliCelsius */
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "hot";
> +				};
> +
> +				cpu_crit: cpu_crit {
> +					/* milliCelsius */
> +					temperature = <110000>;
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +	};
> +

This wasn't sorted properly (thermal is not between mali- and memory
in the alphabetical order). Fixed and applied, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature