[PATCH] drm: dw-hdmi: Implement the mode_fixup drm helper
From: Romain Perier
Date: Fri Apr 07 2017 - 08:18:01 EST
This helper is supposed to validate or reject the modeline before it
applied by the mode setting. Currently this function has been dropped,
it was previously set to a dummy function that always returned true. For
both cases, this means that userspace can ask for a bad modeline that
will be always accepted.
On some platforms, like Rockchip, the drm dw_hdmi-rockchip variant driver
already implements the atomic_check drm helper, so mode_fixup cannot be
handled and implemented there (as drm_atomic_helper relies on either
atomic_check or mode_fixup).
This commit implements this helper. It only checks that this mode is
correct from the connector point of view
Signed-off-by: Romain Perier <romain.perier@xxxxxxxxxxxxx>
---
drivers/gpu/drm/bridge/dw-hdmi.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c b/drivers/gpu/drm/bridge/dw-hdmi.c
index 22211ff..3bd0807 100644
--- a/drivers/gpu/drm/bridge/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/dw-hdmi.c
@@ -1740,6 +1740,21 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
return 0;
}
+
+static bool dw_hdmi_bridge_mode_fixup(struct drm_bridge *bridge,
+ const struct drm_display_mode *orig_mode,
+ struct drm_display_mode *mode)
+{
+ struct dw_hdmi *hdmi = bridge->driver_private;
+ struct drm_connector *connector = &hdmi->connector;
+ enum drm_mode_status status;
+
+ status = dw_hdmi_connector_mode_valid(connector, mode);
+ if (status != MODE_OK)
+ return false;
+ return true;
+}
+
static void dw_hdmi_bridge_mode_set(struct drm_bridge *bridge,
struct drm_display_mode *orig_mode,
struct drm_display_mode *mode)
@@ -1781,6 +1796,7 @@ static const struct drm_bridge_funcs dw_hdmi_bridge_funcs = {
.enable = dw_hdmi_bridge_enable,
.disable = dw_hdmi_bridge_disable,
.mode_set = dw_hdmi_bridge_mode_set,
+ .mode_fixup = dw_hdmi_bridge_mode_fixup,
};
static irqreturn_t dw_hdmi_i2c_irq(struct dw_hdmi *hdmi)
--
2.9.3