Re: [PATCH 1/3] clocksource: Augment bindings for Faraday timer

[Daniel Lezcano]

On Fri, Mar 24, 2017 at 10:32:33PM +0100, Linus Walleij wrote:
> It turns out that the Cortina Gemini timer block is just a
> standard IP block from Faraday Technology named FTTMR010.
> 
> In order to make things clear and understandable, we rename the
> bindings with a Faraday compatible as primary and the Cortina
> gemini as a more specific case.
> 
> For the plain Faraday timer we require two clock references,
> while the Gemini can keep it's syscon lookup pattern.
> 
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> ---

Rob ? Is this change ok for you?

Thanks.

  -- Daniel

>  .../bindings/timer/cortina,gemini-timer.txt        | 22 ---------------
>  .../devicetree/bindings/timer/faraday,fttmr010.txt | 33 ++++++++++++++++++++++
>  2 files changed, 33 insertions(+), 22 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/timer/cortina,gemini-timer.txt
>  create mode 100644 Documentation/devicetree/bindings/timer/faraday,fttmr010.txt
> 
> diff --git a/Documentation/devicetree/bindings/timer/cortina,gemini-timer.txt b/Documentation/devicetree/bindings/timer/cortina,gemini-timer.txt
> deleted file mode 100644
> index 16ea1d3b2e9e..000000000000
> --- a/Documentation/devicetree/bindings/timer/cortina,gemini-timer.txt
> +++ /dev/null
> @@ -1,22 +0,0 @@
> -Cortina Systems Gemini timer
> -
> -This timer is embedded in the Cortina Systems Gemini SoCs.
> -
> -Required properties:
> -
> -- compatible : Must be "cortina,gemini-timer"
> -- reg : Should contain registers location and length
> -- interrupts : Should contain the three timer interrupts with
> -  flags for rising edge
> -- syscon : a phandle to the global Gemini system controller
> -
> -Example:
> -
> -timer@43000000 {
> -	compatible = "cortina,gemini-timer";
> -	reg = <0x43000000 0x1000>;
> -	interrupts = <14 IRQ_TYPE_EDGE_RISING>, /* Timer 1 */
> -		   <15 IRQ_TYPE_EDGE_RISING>, /* Timer 2 */
> -		   <16 IRQ_TYPE_EDGE_RISING>; /* Timer 3 */
> -	syscon = <&syscon>;
> -};
> diff --git a/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt b/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt
> new file mode 100644
> index 000000000000..b73ca6cd07f8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt
> @@ -0,0 +1,33 @@
> +Faraday Technology timer
> +
> +This timer is a generic IP block from Faraday Technology, embedded in the
> +Cortina Systems Gemini SoCs and other designs.
> +
> +Required properties:
> +
> +- compatible : Must be one of
> +  "faraday,fttmr010"
> +  "cortina,gemini-timer"
> +- reg : Should contain registers location and length
> +- interrupts : Should contain the three timer interrupts usually with
> +  flags for falling edge
> +
> +Optionally required properties:
> +
> +- clocks : a clock to provide the tick rate for "faraday,fttmr010"
> +- clock-names : should be "EXTCLK" and "PCLK" for the external tick timer
> +  and peripheral clock respectively, for "faraday,fttmr010"
> +- syscon : a phandle to the global Gemini system controller if the compatible
> +  type is "cortina,gemini-timer"
> +
> +Example:
> +
> +timer@43000000 {
> +	compatible = "faraday,fttmr010";
> +	reg = <0x43000000 0x1000>;
> +	interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
> +		   <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
> +		   <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
> +	clocks = <&extclk>, <&pclk>;
> +	clock-names = "EXTCLK", "PCLK";
> +};
> -- 
> 2.9.3
> 

-- 

 <http://www.linaro.org/> Linaro.org â Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog