Re: [PATCH net-next] bindings: net: stmmac: add missing note about LPI interrupt

[Sergei Shtylyov]

Hello!

On 04/07/2017 05:30 PM, Niklas Cassel wrote:

> From: Niklas Cassel <niklas.cassel@xxxxxxxx>
>
> The hardware has a LPI interrupt.
> There is already code in the stmmac driver to parse and handle the
> interrupt. However, this information was missing from the DT binding.
>
> Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxx>
> ---
>  Documentation/devicetree/bindings/net/stmmac.txt | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
> index f652b0c384ce..8977abc266ac 100644
> --- a/Documentation/devicetree/bindings/net/stmmac.txt
> +++ b/Documentation/devicetree/bindings/net/stmmac.txt
> @@ -8,8 +8,8 @@ Required properties:
>    that services interrupts for this device
>  - interrupts: Should contain the STMMAC interrupts
>  - interrupt-names: Should contain the interrupt names "macirq"
> -  "eth_wake_irq" if this interrupt is supported in the "interrupts"
> -  property
> +  "eth_wake_irq" if this interrupt is supported in the "interrupts property

   Missed closing quote?

> +  "eth_lpi" if this interrupt is supported in the "interrupts" property
>  - phy-mode: See ethernet.txt file in the same directory.
>  - snps,reset-gpio 	gpio number for phy reset.
>  - snps,reset-active-low boolean flag to indicate if phy reset is active low.
[...]

MBR, Sergei