Re: [PATCH] usb: host: plat: Enable xHCI plat runtime PM
From: Baolin Wang
Date: Mon Apr 10 2017 - 03:58:10 EST
Hi Mathias,
On 30 March 2017 at 11:26, Baolin Wang <baolin.wang@xxxxxxxxxx> wrote:
> Enable the xHCI plat runtime PM for parent device to suspend/resume
> xHCI. Also call pm_runtime_forbid() in probe() function to force users
> to explicitly enable runtime pm using power/control in sysfs, in case
> some parent devices didn't implement runtime PM callbacks.
>
> Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxx>
> ---
> drivers/usb/host/xhci-plat.c | 54 ++++++++++++++++++++++++++++++++++++------
> 1 file changed, 47 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index bd02a6c..2036c24 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -179,9 +179,15 @@ static int xhci_plat_probe(struct platform_device *pdev)
> return ret;
> }
>
> + pm_runtime_set_active(&pdev->dev);
> + pm_runtime_enable(&pdev->dev);
> + pm_runtime_get_noresume(&pdev->dev);
> +
> hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
> - if (!hcd)
> - return -ENOMEM;
> + if (!hcd) {
> + ret = -ENOMEM;
> + goto disable_runtime;
> + }
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> hcd->regs = devm_ioremap_resource(&pdev->dev, res);
> @@ -258,6 +264,14 @@ static int xhci_plat_probe(struct platform_device *pdev)
> if (ret)
> goto dealloc_usb2_hcd;
>
> + pm_runtime_put_noidle(&pdev->dev);
> +
> + /*
> + * Prevent runtime pm from being on as default, users should enable
> + * runtime pm using power/control in sysfs.
> + */
> + pm_runtime_forbid(&pdev->dev);
> +
> return 0;
>
>
> @@ -277,6 +291,10 @@ static int xhci_plat_probe(struct platform_device *pdev)
> put_hcd:
> usb_put_hcd(hcd);
>
> +disable_runtime:
> + pm_runtime_put_noidle(&pdev->dev);
> + pm_runtime_disable(&pdev->dev);
> +
> return ret;
> }
>
> @@ -298,6 +316,9 @@ static int xhci_plat_remove(struct platform_device *dev)
> clk_disable_unprepare(clk);
> usb_put_hcd(hcd);
>
> + pm_runtime_set_suspended(&dev->dev);
> + pm_runtime_disable(&dev->dev);
> +
> return 0;
> }
>
> @@ -325,14 +346,33 @@ static int xhci_plat_resume(struct device *dev)
>
> return xhci_resume(xhci, 0);
> }
> +#endif /* CONFIG_PM_SLEEP */
> +
> +#ifdef CONFIG_PM
> +static int xhci_plat_runtime_suspend(struct device *dev)
> +{
> + struct usb_hcd *hcd = dev_get_drvdata(dev);
> + struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> +
> + return xhci_suspend(xhci, device_may_wakeup(dev));
> +}
> +
> +static int xhci_plat_runtime_resume(struct device *dev)
> +{
> + struct usb_hcd *hcd = dev_get_drvdata(dev);
> + struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> +
> + return xhci_resume(xhci, 0);
> +}
> +#endif /* CONFIG_PM */
>
> static const struct dev_pm_ops xhci_plat_pm_ops = {
> SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
> +
> + SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend,
> + xhci_plat_runtime_resume,
> + NULL)
> };
> -#define DEV_PM_OPS (&xhci_plat_pm_ops)
> -#else
> -#define DEV_PM_OPS NULL
> -#endif /* CONFIG_PM */
>
> static const struct acpi_device_id usb_xhci_acpi_match[] = {
> /* XHCI-compliant USB Controller */
> @@ -346,7 +386,7 @@ static int xhci_plat_resume(struct device *dev)
> .remove = xhci_plat_remove,
> .driver = {
> .name = "xhci-hcd",
> - .pm = DEV_PM_OPS,
> + .pm = &xhci_plat_pm_ops,
> .of_match_table = of_match_ptr(usb_xhci_of_match),
> .acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
> },
Any comments?
--
Baolin.wang
Best Regards