[PATCH 4.9 113/152] amd-xgbe: Prepare for working with more than one type of phy
From: Greg Kroah-Hartman
Date: Mon Apr 10 2017 - 13:21:37 EST
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Lendacky, Thomas" <Thomas.Lendacky@xxxxxxx>
[ Upstream commit e57f7a3feaef0e9e196801f1625bca1337405421 ]
Prepare the code to be able to work with more than one type of phy by
adding additional callable functions into the phy interface and removing
phy specific settings/functions from non-phy related files.
Signed-off-by: Tom Lendacky <thomas.lendacky@xxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/amd/xgbe/Makefile | 3
drivers/net/ethernet/amd/xgbe/xgbe-dev.c | 58 -
drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 6
drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 19
drivers/net/ethernet/amd/xgbe/xgbe-main.c | 214 ++-----
drivers/net/ethernet/amd/xgbe/xgbe-mdio.c | 543 +++++------------
drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c | 821 +++++++++++++++++++++++++++
drivers/net/ethernet/amd/xgbe/xgbe.h | 130 ++--
8 files changed, 1137 insertions(+), 657 deletions(-)
create mode 100644 drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c
--- a/drivers/net/ethernet/amd/xgbe/Makefile
+++ b/drivers/net/ethernet/amd/xgbe/Makefile
@@ -2,7 +2,8 @@ obj-$(CONFIG_AMD_XGBE) += amd-xgbe.o
amd-xgbe-objs := xgbe-main.o xgbe-drv.o xgbe-dev.o \
xgbe-desc.o xgbe-ethtool.o xgbe-mdio.o \
- xgbe-ptp.o
+ xgbe-ptp.o \
+ xgbe-phy-v1.o
amd-xgbe-$(CONFIG_AMD_XGBE_DCB) += xgbe-dcb.o
amd-xgbe-$(CONFIG_DEBUG_FS) += xgbe-debugfs.o
--- a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
@@ -704,32 +704,26 @@ static void xgbe_enable_mac_interrupts(s
XGMAC_IOWRITE_BITS(pdata, MMC_TIER, ALL_INTERRUPTS, 0xffffffff);
}
-static int xgbe_set_gmii_speed(struct xgbe_prv_data *pdata)
+static int xgbe_set_speed(struct xgbe_prv_data *pdata, int speed)
{
- if (XGMAC_IOREAD_BITS(pdata, MAC_TCR, SS) == 0x3)
- return 0;
-
- XGMAC_IOWRITE_BITS(pdata, MAC_TCR, SS, 0x3);
-
- return 0;
-}
-
-static int xgbe_set_gmii_2500_speed(struct xgbe_prv_data *pdata)
-{
- if (XGMAC_IOREAD_BITS(pdata, MAC_TCR, SS) == 0x2)
- return 0;
+ unsigned int ss;
- XGMAC_IOWRITE_BITS(pdata, MAC_TCR, SS, 0x2);
-
- return 0;
-}
-
-static int xgbe_set_xgmii_speed(struct xgbe_prv_data *pdata)
-{
- if (XGMAC_IOREAD_BITS(pdata, MAC_TCR, SS) == 0)
- return 0;
+ switch (speed) {
+ case SPEED_1000:
+ ss = 0x03;
+ break;
+ case SPEED_2500:
+ ss = 0x02;
+ break;
+ case SPEED_10000:
+ ss = 0x00;
+ break;
+ default:
+ return -EINVAL;
+ }
- XGMAC_IOWRITE_BITS(pdata, MAC_TCR, SS, 0);
+ if (XGMAC_IOREAD_BITS(pdata, MAC_TCR, SS) != ss)
+ XGMAC_IOWRITE_BITS(pdata, MAC_TCR, SS, ss);
return 0;
}
@@ -2177,19 +2171,7 @@ static void xgbe_config_jumbo_enable(str
static void xgbe_config_mac_speed(struct xgbe_prv_data *pdata)
{
- switch (pdata->phy_speed) {
- case SPEED_10000:
- xgbe_set_xgmii_speed(pdata);
- break;
-
- case SPEED_2500:
- xgbe_set_gmii_2500_speed(pdata);
- break;
-
- case SPEED_1000:
- xgbe_set_gmii_speed(pdata);
- break;
- }
+ xgbe_set_speed(pdata, pdata->phy_speed);
}
static void xgbe_config_checksum_offload(struct xgbe_prv_data *pdata)
@@ -2905,9 +2887,7 @@ void xgbe_init_function_ptrs_dev(struct
hw_if->read_mmd_regs = xgbe_read_mmd_regs;
hw_if->write_mmd_regs = xgbe_write_mmd_regs;
- hw_if->set_gmii_speed = xgbe_set_gmii_speed;
- hw_if->set_gmii_2500_speed = xgbe_set_gmii_2500_speed;
- hw_if->set_xgmii_speed = xgbe_set_xgmii_speed;
+ hw_if->set_speed = xgbe_set_speed;
hw_if->enable_tx = xgbe_enable_tx;
hw_if->disable_tx = xgbe_disable_tx;
--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -783,7 +783,7 @@ static void xgbe_free_rx_data(struct xgb
DBGPR("<--xgbe_free_rx_data\n");
}
-static int xgbe_phy_init(struct xgbe_prv_data *pdata)
+static int xgbe_phy_reset(struct xgbe_prv_data *pdata)
{
pdata->phy_link = -1;
pdata->phy_speed = SPEED_UNKNOWN;
@@ -1297,8 +1297,8 @@ static int xgbe_open(struct net_device *
DBGPR("-->xgbe_open\n");
- /* Initialize the phy */
- ret = xgbe_phy_init(pdata);
+ /* Reset the phy settings */
+ ret = xgbe_phy_reset(pdata);
if (ret)
return ret;
--- a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
@@ -316,24 +316,7 @@ static int xgbe_set_settings(struct net_
}
if (cmd->autoneg == AUTONEG_DISABLE) {
- switch (speed) {
- case SPEED_10000:
- break;
- case SPEED_2500:
- if (pdata->speed_set != XGBE_SPEEDSET_2500_10000) {
- netdev_err(netdev, "unsupported speed %u\n",
- speed);
- return -EINVAL;
- }
- break;
- case SPEED_1000:
- if (pdata->speed_set != XGBE_SPEEDSET_1000_10000) {
- netdev_err(netdev, "unsupported speed %u\n",
- speed);
- return -EINVAL;
- }
- break;
- default:
+ if (!pdata->phy_if.phy_valid_speed(pdata, speed)) {
netdev_err(netdev, "unsupported speed %u\n", speed);
return -EINVAL;
}
--- a/drivers/net/ethernet/amd/xgbe/xgbe-main.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-main.c
@@ -125,6 +125,7 @@
#include <linux/of_net.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
+#include <linux/of_device.h>
#include <linux/clk.h>
#include <linux/property.h>
#include <linux/acpi.h>
@@ -145,42 +146,6 @@ MODULE_PARM_DESC(debug, " Network interf
static const u32 default_msg_level = (NETIF_MSG_LINK | NETIF_MSG_IFDOWN |
NETIF_MSG_IFUP);
-static const u32 xgbe_serdes_blwc[] = {
- XGBE_SPEED_1000_BLWC,
- XGBE_SPEED_2500_BLWC,
- XGBE_SPEED_10000_BLWC,
-};
-
-static const u32 xgbe_serdes_cdr_rate[] = {
- XGBE_SPEED_1000_CDR,
- XGBE_SPEED_2500_CDR,
- XGBE_SPEED_10000_CDR,
-};
-
-static const u32 xgbe_serdes_pq_skew[] = {
- XGBE_SPEED_1000_PQ,
- XGBE_SPEED_2500_PQ,
- XGBE_SPEED_10000_PQ,
-};
-
-static const u32 xgbe_serdes_tx_amp[] = {
- XGBE_SPEED_1000_TXAMP,
- XGBE_SPEED_2500_TXAMP,
- XGBE_SPEED_10000_TXAMP,
-};
-
-static const u32 xgbe_serdes_dfe_tap_cfg[] = {
- XGBE_SPEED_1000_DFE_TAP_CONFIG,
- XGBE_SPEED_2500_DFE_TAP_CONFIG,
- XGBE_SPEED_10000_DFE_TAP_CONFIG,
-};
-
-static const u32 xgbe_serdes_dfe_tap_ena[] = {
- XGBE_SPEED_1000_DFE_TAP_ENABLE,
- XGBE_SPEED_2500_DFE_TAP_ENABLE,
- XGBE_SPEED_10000_DFE_TAP_ENABLE,
-};
-
static void xgbe_default_config(struct xgbe_prv_data *pdata)
{
DBGPR("-->xgbe_default_config\n");
@@ -207,9 +172,22 @@ static void xgbe_init_all_fptrs(struct x
xgbe_init_function_ptrs_dev(&pdata->hw_if);
xgbe_init_function_ptrs_phy(&pdata->phy_if);
xgbe_init_function_ptrs_desc(&pdata->desc_if);
+
+ pdata->vdata->init_function_ptrs_phy_impl(&pdata->phy_if);
}
#ifdef CONFIG_ACPI
+static const struct acpi_device_id xgbe_acpi_match[];
+
+static struct xgbe_version_data *xgbe_acpi_vdata(struct xgbe_prv_data *pdata)
+{
+ const struct acpi_device_id *id;
+
+ id = acpi_match_device(xgbe_acpi_match, pdata->dev);
+
+ return id ? (struct xgbe_version_data *)id->driver_data : NULL;
+}
+
static int xgbe_acpi_support(struct xgbe_prv_data *pdata)
{
struct device *dev = pdata->dev;
@@ -237,6 +215,11 @@ static int xgbe_acpi_support(struct xgbe
return 0;
}
#else /* CONFIG_ACPI */
+static struct xgbe_version_data *xgbe_acpi_vdata(struct xgbe_prv_data *pdata)
+{
+ return NULL;
+}
+
static int xgbe_acpi_support(struct xgbe_prv_data *pdata)
{
return -EINVAL;
@@ -244,6 +227,17 @@ static int xgbe_acpi_support(struct xgbe
#endif /* CONFIG_ACPI */
#ifdef CONFIG_OF
+static const struct of_device_id xgbe_of_match[];
+
+static struct xgbe_version_data *xgbe_of_vdata(struct xgbe_prv_data *pdata)
+{
+ const struct of_device_id *id;
+
+ id = of_match_device(xgbe_of_match, pdata->dev);
+
+ return id ? (struct xgbe_version_data *)id->data : NULL;
+}
+
static int xgbe_of_support(struct xgbe_prv_data *pdata)
{
struct device *dev = pdata->dev;
@@ -292,6 +286,11 @@ static struct platform_device *xgbe_of_g
return phy_pdev;
}
#else /* CONFIG_OF */
+static struct xgbe_version_data *xgbe_of_vdata(struct xgbe_prv_data *pdata)
+{
+ return NULL;
+}
+
static int xgbe_of_support(struct xgbe_prv_data *pdata)
{
return -EINVAL;
@@ -333,11 +332,17 @@ static struct platform_device *xgbe_get_
return phy_pdev;
}
+static struct xgbe_version_data *xgbe_get_vdata(struct xgbe_prv_data *pdata)
+{
+ return pdata->use_acpi ? xgbe_acpi_vdata(pdata)
+ : xgbe_of_vdata(pdata);
+}
+
static int xgbe_probe(struct platform_device *pdev)
{
struct xgbe_prv_data *pdata;
struct net_device *netdev;
- struct device *dev = &pdev->dev, *phy_dev;
+ struct device *dev = &pdev->dev;
struct platform_device *phy_pdev;
struct resource *res;
const char *phy_mode;
@@ -374,13 +379,17 @@ static int xgbe_probe(struct platform_de
/* Check if we should use ACPI or DT */
pdata->use_acpi = dev->of_node ? 0 : 1;
+ /* Get the version data */
+ pdata->vdata = xgbe_get_vdata(pdata);
+
phy_pdev = xgbe_get_phy_pdev(pdata);
if (!phy_pdev) {
dev_err(dev, "unable to obtain phy device\n");
ret = -EINVAL;
goto err_phydev;
}
- phy_dev = &phy_pdev->dev;
+ pdata->phy_pdev = phy_pdev;
+ pdata->phy_dev = &phy_pdev->dev;
if (pdev == phy_pdev) {
/* New style device tree or ACPI:
@@ -492,115 +501,6 @@ static int xgbe_probe(struct platform_de
if (device_property_present(dev, XGBE_DMA_IRQS_PROPERTY))
pdata->per_channel_irq = 1;
- /* Retrieve the PHY speedset */
- ret = device_property_read_u32(phy_dev, XGBE_SPEEDSET_PROPERTY,
- &pdata->speed_set);
- if (ret) {
- dev_err(dev, "invalid %s property\n", XGBE_SPEEDSET_PROPERTY);
- goto err_io;
- }
-
- switch (pdata->speed_set) {
- case XGBE_SPEEDSET_1000_10000:
- case XGBE_SPEEDSET_2500_10000:
- break;
- default:
- dev_err(dev, "invalid %s property\n", XGBE_SPEEDSET_PROPERTY);
- ret = -EINVAL;
- goto err_io;
- }
-
- /* Retrieve the PHY configuration properties */
- if (device_property_present(phy_dev, XGBE_BLWC_PROPERTY)) {
- ret = device_property_read_u32_array(phy_dev,
- XGBE_BLWC_PROPERTY,
- pdata->serdes_blwc,
- XGBE_SPEEDS);
- if (ret) {
- dev_err(dev, "invalid %s property\n",
- XGBE_BLWC_PROPERTY);
- goto err_io;
- }
- } else {
- memcpy(pdata->serdes_blwc, xgbe_serdes_blwc,
- sizeof(pdata->serdes_blwc));
- }
-
- if (device_property_present(phy_dev, XGBE_CDR_RATE_PROPERTY)) {
- ret = device_property_read_u32_array(phy_dev,
- XGBE_CDR_RATE_PROPERTY,
- pdata->serdes_cdr_rate,
- XGBE_SPEEDS);
- if (ret) {
- dev_err(dev, "invalid %s property\n",
- XGBE_CDR_RATE_PROPERTY);
- goto err_io;
- }
- } else {
- memcpy(pdata->serdes_cdr_rate, xgbe_serdes_cdr_rate,
- sizeof(pdata->serdes_cdr_rate));
- }
-
- if (device_property_present(phy_dev, XGBE_PQ_SKEW_PROPERTY)) {
- ret = device_property_read_u32_array(phy_dev,
- XGBE_PQ_SKEW_PROPERTY,
- pdata->serdes_pq_skew,
- XGBE_SPEEDS);
- if (ret) {
- dev_err(dev, "invalid %s property\n",
- XGBE_PQ_SKEW_PROPERTY);
- goto err_io;
- }
- } else {
- memcpy(pdata->serdes_pq_skew, xgbe_serdes_pq_skew,
- sizeof(pdata->serdes_pq_skew));
- }
-
- if (device_property_present(phy_dev, XGBE_TX_AMP_PROPERTY)) {
- ret = device_property_read_u32_array(phy_dev,
- XGBE_TX_AMP_PROPERTY,
- pdata->serdes_tx_amp,
- XGBE_SPEEDS);
- if (ret) {
- dev_err(dev, "invalid %s property\n",
- XGBE_TX_AMP_PROPERTY);
- goto err_io;
- }
- } else {
- memcpy(pdata->serdes_tx_amp, xgbe_serdes_tx_amp,
- sizeof(pdata->serdes_tx_amp));
- }
-
- if (device_property_present(phy_dev, XGBE_DFE_CFG_PROPERTY)) {
- ret = device_property_read_u32_array(phy_dev,
- XGBE_DFE_CFG_PROPERTY,
- pdata->serdes_dfe_tap_cfg,
- XGBE_SPEEDS);
- if (ret) {
- dev_err(dev, "invalid %s property\n",
- XGBE_DFE_CFG_PROPERTY);
- goto err_io;
- }
- } else {
- memcpy(pdata->serdes_dfe_tap_cfg, xgbe_serdes_dfe_tap_cfg,
- sizeof(pdata->serdes_dfe_tap_cfg));
- }
-
- if (device_property_present(phy_dev, XGBE_DFE_ENA_PROPERTY)) {
- ret = device_property_read_u32_array(phy_dev,
- XGBE_DFE_ENA_PROPERTY,
- pdata->serdes_dfe_tap_ena,
- XGBE_SPEEDS);
- if (ret) {
- dev_err(dev, "invalid %s property\n",
- XGBE_DFE_ENA_PROPERTY);
- goto err_io;
- }
- } else {
- memcpy(pdata->serdes_dfe_tap_ena, xgbe_serdes_dfe_tap_ena,
- sizeof(pdata->serdes_dfe_tap_ena));
- }
-
/* Obtain device settings unique to ACPI/OF */
if (pdata->use_acpi)
ret = xgbe_acpi_support(pdata);
@@ -704,7 +604,9 @@ static int xgbe_probe(struct platform_de
XGMAC_SET_BITS(pdata->rss_options, MAC_RSSCR, UDP4TE, 1);
/* Call MDIO/PHY initialization routine */
- pdata->phy_if.phy_init(pdata);
+ ret = pdata->phy_if.phy_init(pdata);
+ if (ret)
+ goto err_io;
/* Set device operations */
netdev->netdev_ops = xgbe_get_netdev_ops();
@@ -777,8 +679,6 @@ static int xgbe_probe(struct platform_de
xgbe_debugfs_init(pdata);
- platform_device_put(phy_pdev);
-
netdev_notice(netdev, "net device enabled\n");
DBGPR("<-- xgbe_probe\n");
@@ -814,6 +714,8 @@ static int xgbe_remove(struct platform_d
xgbe_ptp_unregister(pdata);
+ pdata->phy_if.phy_exit(pdata);
+
flush_workqueue(pdata->an_workqueue);
destroy_workqueue(pdata->an_workqueue);
@@ -822,6 +724,8 @@ static int xgbe_remove(struct platform_d
unregister_netdev(netdev);
+ platform_device_put(pdata->phy_pdev);
+
free_netdev(netdev);
DBGPR("<--xgbe_remove\n");
@@ -876,9 +780,14 @@ static int xgbe_resume(struct device *de
}
#endif /* CONFIG_PM_SLEEP */
+static const struct xgbe_version_data xgbe_v1 = {
+ .init_function_ptrs_phy_impl = xgbe_init_function_ptrs_phy_v1,
+};
+
#ifdef CONFIG_ACPI
static const struct acpi_device_id xgbe_acpi_match[] = {
- { "AMDI8001", 0 },
+ { .id = "AMDI8001",
+ .driver_data = (kernel_ulong_t)&xgbe_v1 },
{},
};
@@ -887,7 +796,8 @@ MODULE_DEVICE_TABLE(acpi, xgbe_acpi_matc
#ifdef CONFIG_OF
static const struct of_device_id xgbe_of_match[] = {
- { .compatible = "amd,xgbe-seattle-v1a", },
+ { .compatible = "amd,xgbe-seattle-v1a",
+ .data = &xgbe_v1 },
{},
};
--- a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
@@ -145,280 +145,91 @@ static void xgbe_an_disable_kr_training(
XMDIO_WRITE(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, reg);
}
-static void xgbe_pcs_power_cycle(struct xgbe_prv_data *pdata)
+static void xgbe_kr_mode(struct xgbe_prv_data *pdata)
{
- unsigned int reg;
-
- reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
-
- reg |= MDIO_CTRL1_LPOWER;
- XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
-
- usleep_range(75, 100);
-
- reg &= ~MDIO_CTRL1_LPOWER;
- XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
-}
-
-static void xgbe_serdes_start_ratechange(struct xgbe_prv_data *pdata)
-{
- /* Assert Rx and Tx ratechange */
- XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, RATECHANGE, 1);
-}
-
-static void xgbe_serdes_complete_ratechange(struct xgbe_prv_data *pdata)
-{
- unsigned int wait;
- u16 status;
-
- /* Release Rx and Tx ratechange */
- XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, RATECHANGE, 0);
-
- /* Wait for Rx and Tx ready */
- wait = XGBE_RATECHANGE_COUNT;
- while (wait--) {
- usleep_range(50, 75);
-
- status = XSIR0_IOREAD(pdata, SIR0_STATUS);
- if (XSIR_GET_BITS(status, SIR0_STATUS, RX_READY) &&
- XSIR_GET_BITS(status, SIR0_STATUS, TX_READY))
- goto rx_reset;
- }
-
- netif_dbg(pdata, link, pdata->netdev, "SerDes rx/tx not ready (%#hx)\n",
- status);
-
-rx_reset:
- /* Perform Rx reset for the DFE changes */
- XRXTX_IOWRITE_BITS(pdata, RXTX_REG6, RESETB_RXD, 0);
- XRXTX_IOWRITE_BITS(pdata, RXTX_REG6, RESETB_RXD, 1);
-}
-
-static void xgbe_xgmii_mode(struct xgbe_prv_data *pdata)
-{
- unsigned int reg;
-
/* Enable KR training */
xgbe_an_enable_kr_training(pdata);
/* Set MAC to 10G speed */
- pdata->hw_if.set_xgmii_speed(pdata);
-
- /* Set PCS to KR/10G speed */
- reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
- reg &= ~MDIO_PCS_CTRL2_TYPE;
- reg |= MDIO_PCS_CTRL2_10GBR;
- XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
-
- reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
- reg &= ~MDIO_CTRL1_SPEEDSEL;
- reg |= MDIO_CTRL1_SPEED10G;
- XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
-
- xgbe_pcs_power_cycle(pdata);
-
- /* Set SerDes to 10G speed */
- xgbe_serdes_start_ratechange(pdata);
-
- XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_10000_RATE);
- XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_10000_WORD);
- XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_10000_PLL);
-
- XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
- pdata->serdes_cdr_rate[XGBE_SPEED_10000]);
- XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
- pdata->serdes_tx_amp[XGBE_SPEED_10000]);
- XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
- pdata->serdes_blwc[XGBE_SPEED_10000]);
- XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
- pdata->serdes_pq_skew[XGBE_SPEED_10000]);
- XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
- pdata->serdes_dfe_tap_cfg[XGBE_SPEED_10000]);
- XRXTX_IOWRITE(pdata, RXTX_REG22,
- pdata->serdes_dfe_tap_ena[XGBE_SPEED_10000]);
-
- xgbe_serdes_complete_ratechange(pdata);
+ pdata->hw_if.set_speed(pdata, SPEED_10000);
- netif_dbg(pdata, link, pdata->netdev, "10GbE KR mode set\n");
+ /* Call PHY implementation support to complete rate change */
+ pdata->phy_if.phy_impl.set_mode(pdata, XGBE_MODE_KR);
}
-static void xgbe_gmii_2500_mode(struct xgbe_prv_data *pdata)
+static void xgbe_kx_2500_mode(struct xgbe_prv_data *pdata)
{
- unsigned int reg;
-
/* Disable KR training */
xgbe_an_disable_kr_training(pdata);
/* Set MAC to 2.5G speed */
- pdata->hw_if.set_gmii_2500_speed(pdata);
-
- /* Set PCS to KX/1G speed */
- reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
- reg &= ~MDIO_PCS_CTRL2_TYPE;
- reg |= MDIO_PCS_CTRL2_10GBX;
- XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
-
- reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
- reg &= ~MDIO_CTRL1_SPEEDSEL;
- reg |= MDIO_CTRL1_SPEED1G;
- XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
-
- xgbe_pcs_power_cycle(pdata);
-
- /* Set SerDes to 2.5G speed */
- xgbe_serdes_start_ratechange(pdata);
-
- XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_2500_RATE);
- XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_2500_WORD);
- XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_2500_PLL);
-
- XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
- pdata->serdes_cdr_rate[XGBE_SPEED_2500]);
- XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
- pdata->serdes_tx_amp[XGBE_SPEED_2500]);
- XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
- pdata->serdes_blwc[XGBE_SPEED_2500]);
- XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
- pdata->serdes_pq_skew[XGBE_SPEED_2500]);
- XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
- pdata->serdes_dfe_tap_cfg[XGBE_SPEED_2500]);
- XRXTX_IOWRITE(pdata, RXTX_REG22,
- pdata->serdes_dfe_tap_ena[XGBE_SPEED_2500]);
-
- xgbe_serdes_complete_ratechange(pdata);
+ pdata->hw_if.set_speed(pdata, SPEED_2500);
- netif_dbg(pdata, link, pdata->netdev, "2.5GbE KX mode set\n");
+ /* Call PHY implementation support to complete rate change */
+ pdata->phy_if.phy_impl.set_mode(pdata, XGBE_MODE_KX_2500);
}
-static void xgbe_gmii_mode(struct xgbe_prv_data *pdata)
+static void xgbe_kx_1000_mode(struct xgbe_prv_data *pdata)
{
- unsigned int reg;
-
/* Disable KR training */
xgbe_an_disable_kr_training(pdata);
/* Set MAC to 1G speed */
- pdata->hw_if.set_gmii_speed(pdata);
-
- /* Set PCS to KX/1G speed */
- reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
- reg &= ~MDIO_PCS_CTRL2_TYPE;
- reg |= MDIO_PCS_CTRL2_10GBX;
- XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
-
- reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
- reg &= ~MDIO_CTRL1_SPEEDSEL;
- reg |= MDIO_CTRL1_SPEED1G;
- XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
-
- xgbe_pcs_power_cycle(pdata);
-
- /* Set SerDes to 1G speed */
- xgbe_serdes_start_ratechange(pdata);
-
- XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_1000_RATE);
- XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_1000_WORD);
- XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_1000_PLL);
-
- XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
- pdata->serdes_cdr_rate[XGBE_SPEED_1000]);
- XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
- pdata->serdes_tx_amp[XGBE_SPEED_1000]);
- XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
- pdata->serdes_blwc[XGBE_SPEED_1000]);
- XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
- pdata->serdes_pq_skew[XGBE_SPEED_1000]);
- XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
- pdata->serdes_dfe_tap_cfg[XGBE_SPEED_1000]);
- XRXTX_IOWRITE(pdata, RXTX_REG22,
- pdata->serdes_dfe_tap_ena[XGBE_SPEED_1000]);
+ pdata->hw_if.set_speed(pdata, SPEED_1000);
- xgbe_serdes_complete_ratechange(pdata);
-
- netif_dbg(pdata, link, pdata->netdev, "1GbE KX mode set\n");
+ /* Call PHY implementation support to complete rate change */
+ pdata->phy_if.phy_impl.set_mode(pdata, XGBE_MODE_KX_1000);
}
-static void xgbe_cur_mode(struct xgbe_prv_data *pdata,
- enum xgbe_mode *mode)
+static enum xgbe_mode xgbe_cur_mode(struct xgbe_prv_data *pdata)
{
- unsigned int reg;
-
- reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
- if ((reg & MDIO_PCS_CTRL2_TYPE) == MDIO_PCS_CTRL2_10GBR)
- *mode = XGBE_MODE_KR;
- else
- *mode = XGBE_MODE_KX;
+ return pdata->phy_if.phy_impl.cur_mode(pdata);
}
static bool xgbe_in_kr_mode(struct xgbe_prv_data *pdata)
{
- enum xgbe_mode mode;
-
- xgbe_cur_mode(pdata, &mode);
-
- return (mode == XGBE_MODE_KR);
+ return (xgbe_cur_mode(pdata) == XGBE_MODE_KR);
}
-static void xgbe_switch_mode(struct xgbe_prv_data *pdata)
+static void xgbe_change_mode(struct xgbe_prv_data *pdata,
+ enum xgbe_mode mode)
{
- /* If we are in KR switch to KX, and vice-versa */
- if (xgbe_in_kr_mode(pdata)) {
- if (pdata->speed_set == XGBE_SPEEDSET_1000_10000)
- xgbe_gmii_mode(pdata);
- else
- xgbe_gmii_2500_mode(pdata);
- } else {
- xgbe_xgmii_mode(pdata);
+ switch (mode) {
+ case XGBE_MODE_KX_1000:
+ xgbe_kx_1000_mode(pdata);
+ break;
+ case XGBE_MODE_KX_2500:
+ xgbe_kx_2500_mode(pdata);
+ break;
+ case XGBE_MODE_KR:
+ xgbe_kr_mode(pdata);
+ break;
+ case XGBE_MODE_UNKNOWN:
+ break;
+ default:
+ netif_dbg(pdata, link, pdata->netdev,
+ "invalid operation mode requested (%u)\n", mode);
}
}
-static void xgbe_set_mode(struct xgbe_prv_data *pdata,
- enum xgbe_mode mode)
-{
- enum xgbe_mode cur_mode;
-
- xgbe_cur_mode(pdata, &cur_mode);
- if (mode != cur_mode)
- xgbe_switch_mode(pdata);
-}
-
-static bool xgbe_use_xgmii_mode(struct xgbe_prv_data *pdata)
+static void xgbe_switch_mode(struct xgbe_prv_data *pdata)
{
- if (pdata->phy.autoneg == AUTONEG_ENABLE) {
- if (pdata->phy.advertising & ADVERTISED_10000baseKR_Full)
- return true;
- } else {
- if (pdata->phy.speed == SPEED_10000)
- return true;
- }
-
- return false;
+ xgbe_change_mode(pdata, pdata->phy_if.phy_impl.switch_mode(pdata));
}
-static bool xgbe_use_gmii_2500_mode(struct xgbe_prv_data *pdata)
+static void xgbe_set_mode(struct xgbe_prv_data *pdata,
+ enum xgbe_mode mode)
{
- if (pdata->phy.autoneg == AUTONEG_ENABLE) {
- if (pdata->phy.advertising & ADVERTISED_2500baseX_Full)
- return true;
- } else {
- if (pdata->phy.speed == SPEED_2500)
- return true;
- }
+ if (mode == xgbe_cur_mode(pdata))
+ return;
- return false;
+ xgbe_change_mode(pdata, mode);
}
-static bool xgbe_use_gmii_mode(struct xgbe_prv_data *pdata)
+static bool xgbe_use_mode(struct xgbe_prv_data *pdata,
+ enum xgbe_mode mode)
{
- if (pdata->phy.autoneg == AUTONEG_ENABLE) {
- if (pdata->phy.advertising & ADVERTISED_1000baseKX_Full)
- return true;
- } else {
- if (pdata->phy.speed == SPEED_1000)
- return true;
- }
-
- return false;
+ return pdata->phy_if.phy_impl.use_mode(pdata, mode);
}
static void xgbe_set_an(struct xgbe_prv_data *pdata, bool enable, bool restart)
@@ -476,13 +287,15 @@ static enum xgbe_an xgbe_an_tx_training(
/* Start KR training */
reg = XMDIO_READ(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL);
if (reg & XGBE_KR_TRAINING_ENABLE) {
- XSIR0_IOWRITE_BITS(pdata, SIR0_KR_RT_1, RESET, 1);
+ if (pdata->phy_if.phy_impl.kr_training_pre)
+ pdata->phy_if.phy_impl.kr_training_pre(pdata);
reg |= XGBE_KR_TRAINING_START;
XMDIO_WRITE(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL,
reg);
- XSIR0_IOWRITE_BITS(pdata, SIR0_KR_RT_1, RESET, 0);
+ if (pdata->phy_if.phy_impl.kr_training_post)
+ pdata->phy_if.phy_impl.kr_training_post(pdata);
netif_dbg(pdata, link, pdata->netdev,
"KR training initiated\n");
@@ -571,7 +384,7 @@ static enum xgbe_an xgbe_an_page_receive
}
state = xgbe_in_kr_mode(pdata) ? &pdata->kr_state
- : &pdata->kx_state;
+ : &pdata->kx_state;
switch (*state) {
case XGBE_RX_BPA:
@@ -907,24 +720,28 @@ static void xgbe_phy_adjust_link(struct
xgbe_phy_print_status(pdata);
}
+static bool xgbe_phy_valid_speed(struct xgbe_prv_data *pdata, int speed)
+{
+ return pdata->phy_if.phy_impl.valid_speed(pdata, speed);
+}
+
static int xgbe_phy_config_fixed(struct xgbe_prv_data *pdata)
{
+ enum xgbe_mode mode;
+
netif_dbg(pdata, link, pdata->netdev, "fixed PHY configuration\n");
/* Disable auto-negotiation */
xgbe_disable_an(pdata);
- /* Validate/Set specified speed */
- switch (pdata->phy.speed) {
- case SPEED_10000:
- xgbe_set_mode(pdata, XGBE_MODE_KR);
- break;
-
- case SPEED_2500:
- case SPEED_1000:
- xgbe_set_mode(pdata, XGBE_MODE_KX);
+ /* Set specified mode for specified speed */
+ mode = pdata->phy_if.phy_impl.get_mode(pdata, pdata->phy.speed);
+ switch (mode) {
+ case XGBE_MODE_KX_1000:
+ case XGBE_MODE_KX_2500:
+ case XGBE_MODE_KR:
break;
-
+ case XGBE_MODE_UNKNOWN:
default:
return -EINVAL;
}
@@ -933,6 +750,8 @@ static int xgbe_phy_config_fixed(struct
if (pdata->phy.duplex != DUPLEX_FULL)
return -EINVAL;
+ xgbe_set_mode(pdata, mode);
+
return 0;
}
@@ -950,11 +769,12 @@ static int __xgbe_phy_config_aneg(struct
disable_irq(pdata->an_irq);
/* Start auto-negotiation in a supported mode */
- if (pdata->phy.advertising & ADVERTISED_10000baseKR_Full) {
+ if (xgbe_use_mode(pdata, XGBE_MODE_KR)) {
xgbe_set_mode(pdata, XGBE_MODE_KR);
- } else if ((pdata->phy.advertising & ADVERTISED_1000baseKX_Full) ||
- (pdata->phy.advertising & ADVERTISED_2500baseX_Full)) {
- xgbe_set_mode(pdata, XGBE_MODE_KX);
+ } else if (xgbe_use_mode(pdata, XGBE_MODE_KX_2500)) {
+ xgbe_set_mode(pdata, XGBE_MODE_KX_2500);
+ } else if (xgbe_use_mode(pdata, XGBE_MODE_KX_1000)) {
+ xgbe_set_mode(pdata, XGBE_MODE_KX_1000);
} else {
enable_irq(pdata->an_irq);
return -EINVAL;
@@ -1016,108 +836,45 @@ static void xgbe_check_link_timeout(stru
}
}
-static void xgbe_phy_status_force(struct xgbe_prv_data *pdata)
+static enum xgbe_mode xgbe_phy_status_aneg(struct xgbe_prv_data *pdata)
{
- if (xgbe_in_kr_mode(pdata)) {
- pdata->phy.speed = SPEED_10000;
- } else {
- switch (pdata->speed_set) {
- case XGBE_SPEEDSET_1000_10000:
- pdata->phy.speed = SPEED_1000;
- break;
-
- case XGBE_SPEEDSET_2500_10000:
- pdata->phy.speed = SPEED_2500;
- break;
- }
- }
- pdata->phy.duplex = DUPLEX_FULL;
+ return pdata->phy_if.phy_impl.an_outcome(pdata);
}
-static void xgbe_phy_status_aneg(struct xgbe_prv_data *pdata)
+static void xgbe_phy_status_result(struct xgbe_prv_data *pdata)
{
- unsigned int ad_reg, lp_reg;
+ enum xgbe_mode mode;
pdata->phy.lp_advertising = 0;
if ((pdata->phy.autoneg != AUTONEG_ENABLE) || pdata->parallel_detect)
- return xgbe_phy_status_force(pdata);
-
- pdata->phy.lp_advertising |= ADVERTISED_Autoneg;
- pdata->phy.lp_advertising |= ADVERTISED_Backplane;
-
- /* Compare Advertisement and Link Partner register 1 */
- ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE);
- lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA);
- if (lp_reg & 0x400)
- pdata->phy.lp_advertising |= ADVERTISED_Pause;
- if (lp_reg & 0x800)
- pdata->phy.lp_advertising |= ADVERTISED_Asym_Pause;
-
- if (pdata->phy.pause_autoneg) {
- /* Set flow control based on auto-negotiation result */
- pdata->phy.tx_pause = 0;
- pdata->phy.rx_pause = 0;
-
- if (ad_reg & lp_reg & 0x400) {
- pdata->phy.tx_pause = 1;
- pdata->phy.rx_pause = 1;
- } else if (ad_reg & lp_reg & 0x800) {
- if (ad_reg & 0x400)
- pdata->phy.rx_pause = 1;
- else if (lp_reg & 0x400)
- pdata->phy.tx_pause = 1;
- }
- }
-
- /* Compare Advertisement and Link Partner register 2 */
- ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1);
- lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 1);
- if (lp_reg & 0x80)
- pdata->phy.lp_advertising |= ADVERTISED_10000baseKR_Full;
- if (lp_reg & 0x20) {
- switch (pdata->speed_set) {
- case XGBE_SPEEDSET_1000_10000:
- pdata->phy.lp_advertising |= ADVERTISED_1000baseKX_Full;
- break;
- case XGBE_SPEEDSET_2500_10000:
- pdata->phy.lp_advertising |= ADVERTISED_2500baseX_Full;
- break;
- }
- }
+ mode = xgbe_cur_mode(pdata);
+ else
+ mode = xgbe_phy_status_aneg(pdata);
- ad_reg &= lp_reg;
- if (ad_reg & 0x80) {
+ switch (mode) {
+ case XGBE_MODE_KX_1000:
+ pdata->phy.speed = SPEED_1000;
+ break;
+ case XGBE_MODE_KX_2500:
+ pdata->phy.speed = SPEED_2500;
+ break;
+ case XGBE_MODE_KR:
pdata->phy.speed = SPEED_10000;
- xgbe_set_mode(pdata, XGBE_MODE_KR);
- } else if (ad_reg & 0x20) {
- switch (pdata->speed_set) {
- case XGBE_SPEEDSET_1000_10000:
- pdata->phy.speed = SPEED_1000;
- break;
-
- case XGBE_SPEEDSET_2500_10000:
- pdata->phy.speed = SPEED_2500;
- break;
- }
-
- xgbe_set_mode(pdata, XGBE_MODE_KX);
- } else {
+ break;
+ case XGBE_MODE_UNKNOWN:
+ default:
pdata->phy.speed = SPEED_UNKNOWN;
}
- /* Compare Advertisement and Link Partner register 3 */
- ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2);
- lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 2);
- if (lp_reg & 0xc000)
- pdata->phy.lp_advertising |= ADVERTISED_10000baseR_FEC;
-
pdata->phy.duplex = DUPLEX_FULL;
+
+ xgbe_set_mode(pdata, mode);
}
static void xgbe_phy_status(struct xgbe_prv_data *pdata)
{
- unsigned int reg, link_aneg;
+ unsigned int link_aneg;
if (test_bit(XGBE_LINK_ERR, &pdata->dev_state)) {
netif_carrier_off(pdata->netdev);
@@ -1128,20 +885,14 @@ static void xgbe_phy_status(struct xgbe_
link_aneg = (pdata->phy.autoneg == AUTONEG_ENABLE);
- /* Get the link status. Link status is latched low, so read
- * once to clear and then read again to get current state
- */
- reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
- reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
- pdata->phy.link = (reg & MDIO_STAT1_LSTATUS) ? 1 : 0;
-
+ pdata->phy.link = pdata->phy_if.phy_impl.link_status(pdata);
if (pdata->phy.link) {
if (link_aneg && !xgbe_phy_aneg_done(pdata)) {
xgbe_check_link_timeout(pdata);
return;
}
- xgbe_phy_status_aneg(pdata);
+ xgbe_phy_status_result(pdata);
if (test_bit(XGBE_LINK_INIT, &pdata->dev_state))
clear_bit(XGBE_LINK_INIT, &pdata->dev_state);
@@ -1155,7 +906,7 @@ static void xgbe_phy_status(struct xgbe_
return;
}
- xgbe_phy_status_aneg(pdata);
+ xgbe_phy_status_result(pdata);
netif_carrier_off(pdata->netdev);
}
@@ -1168,6 +919,12 @@ static void xgbe_phy_stop(struct xgbe_pr
{
netif_dbg(pdata, link, pdata->netdev, "stopping PHY\n");
+ if (!pdata->phy_started)
+ return;
+
+ /* Indicate the PHY is down */
+ pdata->phy_started = 0;
+
/* Disable auto-negotiation */
xgbe_disable_an(pdata);
@@ -1176,6 +933,8 @@ static void xgbe_phy_stop(struct xgbe_pr
devm_free_irq(pdata->dev, pdata->an_irq, pdata);
+ pdata->phy_if.phy_impl.stop(pdata);
+
pdata->phy.link = 0;
netif_carrier_off(pdata->netdev);
@@ -1189,28 +948,35 @@ static int xgbe_phy_start(struct xgbe_pr
netif_dbg(pdata, link, pdata->netdev, "starting PHY\n");
+ ret = pdata->phy_if.phy_impl.start(pdata);
+ if (ret)
+ return ret;
+
ret = devm_request_irq(pdata->dev, pdata->an_irq,
xgbe_an_isr, 0, pdata->an_name,
pdata);
if (ret) {
netdev_err(netdev, "phy irq request failed\n");
- return ret;
+ goto err_stop;
}
/* Set initial mode - call the mode setting routines
* directly to insure we are properly configured
*/
- if (xgbe_use_xgmii_mode(pdata)) {
- xgbe_xgmii_mode(pdata);
- } else if (xgbe_use_gmii_mode(pdata)) {
- xgbe_gmii_mode(pdata);
- } else if (xgbe_use_gmii_2500_mode(pdata)) {
- xgbe_gmii_2500_mode(pdata);
+ if (xgbe_use_mode(pdata, XGBE_MODE_KR)) {
+ xgbe_kr_mode(pdata);
+ } else if (xgbe_use_mode(pdata, XGBE_MODE_KX_2500)) {
+ xgbe_kx_2500_mode(pdata);
+ } else if (xgbe_use_mode(pdata, XGBE_MODE_KX_1000)) {
+ xgbe_kx_1000_mode(pdata);
} else {
ret = -EINVAL;
goto err_irq;
}
+ /* Indicate the PHY is up and running */
+ pdata->phy_started = 1;
+
/* Set up advertisement registers based on current settings */
xgbe_an_init(pdata);
@@ -1222,25 +988,19 @@ static int xgbe_phy_start(struct xgbe_pr
err_irq:
devm_free_irq(pdata->dev, pdata->an_irq, pdata);
+err_stop:
+ pdata->phy_if.phy_impl.stop(pdata);
+
return ret;
}
static int xgbe_phy_reset(struct xgbe_prv_data *pdata)
{
- unsigned int count, reg;
-
- reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
- reg |= MDIO_CTRL1_RESET;
- XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
-
- count = 50;
- do {
- msleep(20);
- reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
- } while ((reg & MDIO_CTRL1_RESET) && --count);
+ int ret;
- if (reg & MDIO_CTRL1_RESET)
- return -ETIMEDOUT;
+ ret = pdata->phy_if.phy_impl.reset(pdata);
+ if (ret)
+ return ret;
/* Disable auto-negotiation for now */
xgbe_disable_an(pdata);
@@ -1290,41 +1050,57 @@ static void xgbe_dump_phy_registers(stru
dev_dbg(dev, "\n*************************************************\n");
}
-static void xgbe_phy_init(struct xgbe_prv_data *pdata)
+static int xgbe_phy_best_advertised_speed(struct xgbe_prv_data *pdata)
+{
+ if (pdata->phy.advertising & ADVERTISED_10000baseKR_Full)
+ return SPEED_10000;
+ else if (pdata->phy.advertising & ADVERTISED_2500baseX_Full)
+ return SPEED_2500;
+ else if (pdata->phy.advertising & ADVERTISED_1000baseKX_Full)
+ return SPEED_1000;
+
+ return SPEED_UNKNOWN;
+}
+
+static void xgbe_phy_exit(struct xgbe_prv_data *pdata)
{
+ xgbe_phy_stop(pdata);
+
+ pdata->phy_if.phy_impl.exit(pdata);
+}
+
+static int xgbe_phy_init(struct xgbe_prv_data *pdata)
+{
+ int ret;
+
mutex_init(&pdata->an_mutex);
INIT_WORK(&pdata->an_irq_work, xgbe_an_irq_work);
INIT_WORK(&pdata->an_work, xgbe_an_state_machine);
pdata->mdio_mmd = MDIO_MMD_PCS;
- /* Initialize supported features */
- pdata->phy.supported = SUPPORTED_Autoneg;
- pdata->phy.supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
- pdata->phy.supported |= SUPPORTED_Backplane;
- pdata->phy.supported |= SUPPORTED_10000baseKR_Full;
- switch (pdata->speed_set) {
- case XGBE_SPEEDSET_1000_10000:
- pdata->phy.supported |= SUPPORTED_1000baseKX_Full;
- break;
- case XGBE_SPEEDSET_2500_10000:
- pdata->phy.supported |= SUPPORTED_2500baseX_Full;
- break;
- }
-
+ /* Check for FEC support */
pdata->fec_ability = XMDIO_READ(pdata, MDIO_MMD_PMAPMD,
MDIO_PMA_10GBR_FECABLE);
pdata->fec_ability &= (MDIO_PMA_10GBR_FECABLE_ABLE |
MDIO_PMA_10GBR_FECABLE_ERRABLE);
- if (pdata->fec_ability & MDIO_PMA_10GBR_FECABLE_ABLE)
- pdata->phy.supported |= SUPPORTED_10000baseR_FEC;
+ /* Setup the phy (including supported features) */
+ ret = pdata->phy_if.phy_impl.init(pdata);
+ if (ret)
+ return ret;
pdata->phy.advertising = pdata->phy.supported;
pdata->phy.address = 0;
- pdata->phy.autoneg = AUTONEG_ENABLE;
- pdata->phy.speed = SPEED_UNKNOWN;
- pdata->phy.duplex = DUPLEX_UNKNOWN;
+ if (pdata->phy.advertising & ADVERTISED_Autoneg) {
+ pdata->phy.autoneg = AUTONEG_ENABLE;
+ pdata->phy.speed = SPEED_UNKNOWN;
+ pdata->phy.duplex = DUPLEX_UNKNOWN;
+ } else {
+ pdata->phy.autoneg = AUTONEG_DISABLE;
+ pdata->phy.speed = xgbe_phy_best_advertised_speed(pdata);
+ pdata->phy.duplex = DUPLEX_FULL;
+ }
pdata->phy.link = 0;
@@ -1346,11 +1122,14 @@ static void xgbe_phy_init(struct xgbe_pr
if (netif_msg_drv(pdata))
xgbe_dump_phy_registers(pdata);
+
+ return 0;
}
void xgbe_init_function_ptrs_phy(struct xgbe_phy_if *phy_if)
{
phy_if->phy_init = xgbe_phy_init;
+ phy_if->phy_exit = xgbe_phy_exit;
phy_if->phy_reset = xgbe_phy_reset;
phy_if->phy_start = xgbe_phy_start;
@@ -1358,4 +1137,6 @@ void xgbe_init_function_ptrs_phy(struct
phy_if->phy_status = xgbe_phy_status;
phy_if->phy_config_aneg = xgbe_phy_config_aneg;
+
+ phy_if->phy_valid_speed = xgbe_phy_valid_speed;
}
--- /dev/null
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c
@@ -0,0 +1,821 @@
+/*
+ * AMD 10Gb Ethernet driver
+ *
+ * This file is available to you under your choice of the following two
+ * licenses:
+ *
+ * License 1: GPLv2
+ *
+ * Copyright (c) 2016 Advanced Micro Devices, Inc.
+ *
+ * This file is free software; you may copy, redistribute and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ * The Synopsys DWC ETHER XGMAC Software Driver and documentation
+ * (hereinafter "Software") is an unsupported proprietary work of Synopsys,
+ * Inc. unless otherwise expressly agreed to in writing between Synopsys
+ * and you.
+ *
+ * The Software IS NOT an item of Licensed Software or Licensed Product
+ * under any End User Software License Agreement or Agreement for Licensed
+ * Product with Synopsys or any supplement thereto. Permission is hereby
+ * granted, free of charge, to any person obtaining a copy of this software
+ * annotated with this license and the Software, to deal in the Software
+ * without restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or sell copies
+ * of the Software, and to permit persons to whom the Software is furnished
+ * to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * License 2: Modified BSD
+ *
+ * Copyright (c) 2016 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ * The Synopsys DWC ETHER XGMAC Software Driver and documentation
+ * (hereinafter "Software") is an unsupported proprietary work of Synopsys,
+ * Inc. unless otherwise expressly agreed to in writing between Synopsys
+ * and you.
+ *
+ * The Software IS NOT an item of Licensed Software or Licensed Product
+ * under any End User Software License Agreement or Agreement for Licensed
+ * Product with Synopsys or any supplement thereto. Permission is hereby
+ * granted, free of charge, to any person obtaining a copy of this software
+ * annotated with this license and the Software, to deal in the Software
+ * without restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or sell copies
+ * of the Software, and to permit persons to whom the Software is furnished
+ * to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/device.h>
+#include <linux/property.h>
+#include <linux/mdio.h>
+#include <linux/phy.h>
+
+#include "xgbe.h"
+#include "xgbe-common.h"
+
+#define XGBE_BLWC_PROPERTY "amd,serdes-blwc"
+#define XGBE_CDR_RATE_PROPERTY "amd,serdes-cdr-rate"
+#define XGBE_PQ_SKEW_PROPERTY "amd,serdes-pq-skew"
+#define XGBE_TX_AMP_PROPERTY "amd,serdes-tx-amp"
+#define XGBE_DFE_CFG_PROPERTY "amd,serdes-dfe-tap-config"
+#define XGBE_DFE_ENA_PROPERTY "amd,serdes-dfe-tap-enable"
+
+/* Default SerDes settings */
+#define XGBE_SPEED_1000_BLWC 1
+#define XGBE_SPEED_1000_CDR 0x2
+#define XGBE_SPEED_1000_PLL 0x0
+#define XGBE_SPEED_1000_PQ 0xa
+#define XGBE_SPEED_1000_RATE 0x3
+#define XGBE_SPEED_1000_TXAMP 0xf
+#define XGBE_SPEED_1000_WORD 0x1
+#define XGBE_SPEED_1000_DFE_TAP_CONFIG 0x3
+#define XGBE_SPEED_1000_DFE_TAP_ENABLE 0x0
+
+#define XGBE_SPEED_2500_BLWC 1
+#define XGBE_SPEED_2500_CDR 0x2
+#define XGBE_SPEED_2500_PLL 0x0
+#define XGBE_SPEED_2500_PQ 0xa
+#define XGBE_SPEED_2500_RATE 0x1
+#define XGBE_SPEED_2500_TXAMP 0xf
+#define XGBE_SPEED_2500_WORD 0x1
+#define XGBE_SPEED_2500_DFE_TAP_CONFIG 0x3
+#define XGBE_SPEED_2500_DFE_TAP_ENABLE 0x0
+
+#define XGBE_SPEED_10000_BLWC 0
+#define XGBE_SPEED_10000_CDR 0x7
+#define XGBE_SPEED_10000_PLL 0x1
+#define XGBE_SPEED_10000_PQ 0x12
+#define XGBE_SPEED_10000_RATE 0x0
+#define XGBE_SPEED_10000_TXAMP 0xa
+#define XGBE_SPEED_10000_WORD 0x7
+#define XGBE_SPEED_10000_DFE_TAP_CONFIG 0x1
+#define XGBE_SPEED_10000_DFE_TAP_ENABLE 0x7f
+
+/* Rate-change complete wait/retry count */
+#define XGBE_RATECHANGE_COUNT 500
+
+static const u32 xgbe_phy_blwc[] = {
+ XGBE_SPEED_1000_BLWC,
+ XGBE_SPEED_2500_BLWC,
+ XGBE_SPEED_10000_BLWC,
+};
+
+static const u32 xgbe_phy_cdr_rate[] = {
+ XGBE_SPEED_1000_CDR,
+ XGBE_SPEED_2500_CDR,
+ XGBE_SPEED_10000_CDR,
+};
+
+static const u32 xgbe_phy_pq_skew[] = {
+ XGBE_SPEED_1000_PQ,
+ XGBE_SPEED_2500_PQ,
+ XGBE_SPEED_10000_PQ,
+};
+
+static const u32 xgbe_phy_tx_amp[] = {
+ XGBE_SPEED_1000_TXAMP,
+ XGBE_SPEED_2500_TXAMP,
+ XGBE_SPEED_10000_TXAMP,
+};
+
+static const u32 xgbe_phy_dfe_tap_cfg[] = {
+ XGBE_SPEED_1000_DFE_TAP_CONFIG,
+ XGBE_SPEED_2500_DFE_TAP_CONFIG,
+ XGBE_SPEED_10000_DFE_TAP_CONFIG,
+};
+
+static const u32 xgbe_phy_dfe_tap_ena[] = {
+ XGBE_SPEED_1000_DFE_TAP_ENABLE,
+ XGBE_SPEED_2500_DFE_TAP_ENABLE,
+ XGBE_SPEED_10000_DFE_TAP_ENABLE,
+};
+
+struct xgbe_phy_data {
+ /* 1000/10000 vs 2500/10000 indicator */
+ unsigned int speed_set;
+
+ /* SerDes UEFI configurable settings.
+ * Switching between modes/speeds requires new values for some
+ * SerDes settings. The values can be supplied as device
+ * properties in array format. The first array entry is for
+ * 1GbE, second for 2.5GbE and third for 10GbE
+ */
+ u32 blwc[XGBE_SPEEDS];
+ u32 cdr_rate[XGBE_SPEEDS];
+ u32 pq_skew[XGBE_SPEEDS];
+ u32 tx_amp[XGBE_SPEEDS];
+ u32 dfe_tap_cfg[XGBE_SPEEDS];
+ u32 dfe_tap_ena[XGBE_SPEEDS];
+};
+
+static void xgbe_phy_kr_training_pre(struct xgbe_prv_data *pdata)
+{
+ XSIR0_IOWRITE_BITS(pdata, SIR0_KR_RT_1, RESET, 1);
+}
+
+static void xgbe_phy_kr_training_post(struct xgbe_prv_data *pdata)
+{
+ XSIR0_IOWRITE_BITS(pdata, SIR0_KR_RT_1, RESET, 0);
+}
+
+static enum xgbe_mode xgbe_phy_an_outcome(struct xgbe_prv_data *pdata)
+{
+ struct xgbe_phy_data *phy_data = pdata->phy_data;
+ enum xgbe_mode mode;
+ unsigned int ad_reg, lp_reg;
+
+ pdata->phy.lp_advertising |= ADVERTISED_Autoneg;
+ pdata->phy.lp_advertising |= ADVERTISED_Backplane;
+
+ /* Compare Advertisement and Link Partner register 1 */
+ ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE);
+ lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA);
+ if (lp_reg & 0x400)
+ pdata->phy.lp_advertising |= ADVERTISED_Pause;
+ if (lp_reg & 0x800)
+ pdata->phy.lp_advertising |= ADVERTISED_Asym_Pause;
+
+ if (pdata->phy.pause_autoneg) {
+ /* Set flow control based on auto-negotiation result */
+ pdata->phy.tx_pause = 0;
+ pdata->phy.rx_pause = 0;
+
+ if (ad_reg & lp_reg & 0x400) {
+ pdata->phy.tx_pause = 1;
+ pdata->phy.rx_pause = 1;
+ } else if (ad_reg & lp_reg & 0x800) {
+ if (ad_reg & 0x400)
+ pdata->phy.rx_pause = 1;
+ else if (lp_reg & 0x400)
+ pdata->phy.tx_pause = 1;
+ }
+ }
+
+ /* Compare Advertisement and Link Partner register 2 */
+ ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1);
+ lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 1);
+ if (lp_reg & 0x80)
+ pdata->phy.lp_advertising |= ADVERTISED_10000baseKR_Full;
+ if (lp_reg & 0x20) {
+ if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+ pdata->phy.lp_advertising |= ADVERTISED_2500baseX_Full;
+ else
+ pdata->phy.lp_advertising |= ADVERTISED_1000baseKX_Full;
+ }
+
+ ad_reg &= lp_reg;
+ if (ad_reg & 0x80) {
+ mode = XGBE_MODE_KR;
+ } else if (ad_reg & 0x20) {
+ if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+ mode = XGBE_MODE_KX_2500;
+ else
+ mode = XGBE_MODE_KX_1000;
+ } else {
+ mode = XGBE_MODE_UNKNOWN;
+ }
+
+ /* Compare Advertisement and Link Partner register 3 */
+ ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2);
+ lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 2);
+ if (lp_reg & 0xc000)
+ pdata->phy.lp_advertising |= ADVERTISED_10000baseR_FEC;
+
+ return mode;
+}
+
+static void xgbe_phy_pcs_power_cycle(struct xgbe_prv_data *pdata)
+{
+ unsigned int reg;
+
+ reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+
+ reg |= MDIO_CTRL1_LPOWER;
+ XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+ usleep_range(75, 100);
+
+ reg &= ~MDIO_CTRL1_LPOWER;
+ XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+}
+
+static void xgbe_phy_start_ratechange(struct xgbe_prv_data *pdata)
+{
+ /* Assert Rx and Tx ratechange */
+ XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, RATECHANGE, 1);
+}
+
+static void xgbe_phy_complete_ratechange(struct xgbe_prv_data *pdata)
+{
+ unsigned int wait;
+ u16 status;
+
+ /* Release Rx and Tx ratechange */
+ XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, RATECHANGE, 0);
+
+ /* Wait for Rx and Tx ready */
+ wait = XGBE_RATECHANGE_COUNT;
+ while (wait--) {
+ usleep_range(50, 75);
+
+ status = XSIR0_IOREAD(pdata, SIR0_STATUS);
+ if (XSIR_GET_BITS(status, SIR0_STATUS, RX_READY) &&
+ XSIR_GET_BITS(status, SIR0_STATUS, TX_READY))
+ goto rx_reset;
+ }
+
+ netif_dbg(pdata, link, pdata->netdev, "SerDes rx/tx not ready (%#hx)\n",
+ status);
+
+rx_reset:
+ /* Perform Rx reset for the DFE changes */
+ XRXTX_IOWRITE_BITS(pdata, RXTX_REG6, RESETB_RXD, 0);
+ XRXTX_IOWRITE_BITS(pdata, RXTX_REG6, RESETB_RXD, 1);
+}
+
+static void xgbe_phy_kr_mode(struct xgbe_prv_data *pdata)
+{
+ struct xgbe_phy_data *phy_data = pdata->phy_data;
+ unsigned int reg;
+
+ /* Set PCS to KR/10G speed */
+ reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
+ reg &= ~MDIO_PCS_CTRL2_TYPE;
+ reg |= MDIO_PCS_CTRL2_10GBR;
+ XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
+
+ reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+ reg &= ~MDIO_CTRL1_SPEEDSEL;
+ reg |= MDIO_CTRL1_SPEED10G;
+ XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+ xgbe_phy_pcs_power_cycle(pdata);
+
+ /* Set SerDes to 10G speed */
+ xgbe_phy_start_ratechange(pdata);
+
+ XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_10000_RATE);
+ XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_10000_WORD);
+ XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_10000_PLL);
+
+ XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
+ phy_data->cdr_rate[XGBE_SPEED_10000]);
+ XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
+ phy_data->tx_amp[XGBE_SPEED_10000]);
+ XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
+ phy_data->blwc[XGBE_SPEED_10000]);
+ XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
+ phy_data->pq_skew[XGBE_SPEED_10000]);
+ XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
+ phy_data->dfe_tap_cfg[XGBE_SPEED_10000]);
+ XRXTX_IOWRITE(pdata, RXTX_REG22,
+ phy_data->dfe_tap_ena[XGBE_SPEED_10000]);
+
+ xgbe_phy_complete_ratechange(pdata);
+
+ netif_dbg(pdata, link, pdata->netdev, "10GbE KR mode set\n");
+}
+
+static void xgbe_phy_kx_2500_mode(struct xgbe_prv_data *pdata)
+{
+ struct xgbe_phy_data *phy_data = pdata->phy_data;
+ unsigned int reg;
+
+ /* Set PCS to KX/1G speed */
+ reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
+ reg &= ~MDIO_PCS_CTRL2_TYPE;
+ reg |= MDIO_PCS_CTRL2_10GBX;
+ XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
+
+ reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+ reg &= ~MDIO_CTRL1_SPEEDSEL;
+ reg |= MDIO_CTRL1_SPEED1G;
+ XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+ xgbe_phy_pcs_power_cycle(pdata);
+
+ /* Set SerDes to 2.5G speed */
+ xgbe_phy_start_ratechange(pdata);
+
+ XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_2500_RATE);
+ XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_2500_WORD);
+ XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_2500_PLL);
+
+ XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
+ phy_data->cdr_rate[XGBE_SPEED_2500]);
+ XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
+ phy_data->tx_amp[XGBE_SPEED_2500]);
+ XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
+ phy_data->blwc[XGBE_SPEED_2500]);
+ XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
+ phy_data->pq_skew[XGBE_SPEED_2500]);
+ XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
+ phy_data->dfe_tap_cfg[XGBE_SPEED_2500]);
+ XRXTX_IOWRITE(pdata, RXTX_REG22,
+ phy_data->dfe_tap_ena[XGBE_SPEED_2500]);
+
+ xgbe_phy_complete_ratechange(pdata);
+
+ netif_dbg(pdata, link, pdata->netdev, "2.5GbE KX mode set\n");
+}
+
+static void xgbe_phy_kx_1000_mode(struct xgbe_prv_data *pdata)
+{
+ struct xgbe_phy_data *phy_data = pdata->phy_data;
+ unsigned int reg;
+
+ /* Set PCS to KX/1G speed */
+ reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
+ reg &= ~MDIO_PCS_CTRL2_TYPE;
+ reg |= MDIO_PCS_CTRL2_10GBX;
+ XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
+
+ reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+ reg &= ~MDIO_CTRL1_SPEEDSEL;
+ reg |= MDIO_CTRL1_SPEED1G;
+ XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+ xgbe_phy_pcs_power_cycle(pdata);
+
+ /* Set SerDes to 1G speed */
+ xgbe_phy_start_ratechange(pdata);
+
+ XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_1000_RATE);
+ XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_1000_WORD);
+ XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_1000_PLL);
+
+ XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
+ phy_data->cdr_rate[XGBE_SPEED_1000]);
+ XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
+ phy_data->tx_amp[XGBE_SPEED_1000]);
+ XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
+ phy_data->blwc[XGBE_SPEED_1000]);
+ XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
+ phy_data->pq_skew[XGBE_SPEED_1000]);
+ XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
+ phy_data->dfe_tap_cfg[XGBE_SPEED_1000]);
+ XRXTX_IOWRITE(pdata, RXTX_REG22,
+ phy_data->dfe_tap_ena[XGBE_SPEED_1000]);
+
+ xgbe_phy_complete_ratechange(pdata);
+
+ netif_dbg(pdata, link, pdata->netdev, "1GbE KX mode set\n");
+}
+
+static enum xgbe_mode xgbe_phy_cur_mode(struct xgbe_prv_data *pdata)
+{
+ struct xgbe_phy_data *phy_data = pdata->phy_data;
+ enum xgbe_mode mode;
+ unsigned int reg;
+
+ reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
+ reg &= MDIO_PCS_CTRL2_TYPE;
+
+ if (reg == MDIO_PCS_CTRL2_10GBR) {
+ mode = XGBE_MODE_KR;
+ } else {
+ if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+ mode = XGBE_MODE_KX_2500;
+ else
+ mode = XGBE_MODE_KX_1000;
+ }
+
+ return mode;
+}
+
+static enum xgbe_mode xgbe_phy_switch_mode(struct xgbe_prv_data *pdata)
+{
+ struct xgbe_phy_data *phy_data = pdata->phy_data;
+ enum xgbe_mode mode;
+
+ /* If we are in KR switch to KX, and vice-versa */
+ if (xgbe_phy_cur_mode(pdata) == XGBE_MODE_KR) {
+ if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+ mode = XGBE_MODE_KX_2500;
+ else
+ mode = XGBE_MODE_KX_1000;
+ } else {
+ mode = XGBE_MODE_KR;
+ }
+
+ return mode;
+}
+
+static enum xgbe_mode xgbe_phy_get_mode(struct xgbe_prv_data *pdata,
+ int speed)
+{
+ struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+ switch (speed) {
+ case SPEED_1000:
+ return (phy_data->speed_set == XGBE_SPEEDSET_1000_10000)
+ ? XGBE_MODE_KX_1000 : XGBE_MODE_UNKNOWN;
+ case SPEED_2500:
+ return (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+ ? XGBE_MODE_KX_2500 : XGBE_MODE_UNKNOWN;
+ case SPEED_10000:
+ return XGBE_MODE_KR;
+ default:
+ return XGBE_MODE_UNKNOWN;
+ }
+}
+
+static void xgbe_phy_set_mode(struct xgbe_prv_data *pdata, enum xgbe_mode mode)
+{
+ switch (mode) {
+ case XGBE_MODE_KX_1000:
+ xgbe_phy_kx_1000_mode(pdata);
+ break;
+ case XGBE_MODE_KX_2500:
+ xgbe_phy_kx_2500_mode(pdata);
+ break;
+ case XGBE_MODE_KR:
+ xgbe_phy_kr_mode(pdata);
+ break;
+ default:
+ break;
+ }
+}
+
+static bool xgbe_phy_check_mode(struct xgbe_prv_data *pdata,
+ enum xgbe_mode mode, u32 advert)
+{
+ if (pdata->phy.autoneg == AUTONEG_ENABLE) {
+ if (pdata->phy.advertising & advert)
+ return true;
+ } else {
+ enum xgbe_mode cur_mode;
+
+ cur_mode = xgbe_phy_get_mode(pdata, pdata->phy.speed);
+ if (cur_mode == mode)
+ return true;
+ }
+
+ return false;
+}
+
+static bool xgbe_phy_use_mode(struct xgbe_prv_data *pdata, enum xgbe_mode mode)
+{
+ switch (mode) {
+ case XGBE_MODE_KX_1000:
+ return xgbe_phy_check_mode(pdata, mode,
+ ADVERTISED_1000baseKX_Full);
+ case XGBE_MODE_KX_2500:
+ return xgbe_phy_check_mode(pdata, mode,
+ ADVERTISED_2500baseX_Full);
+ case XGBE_MODE_KR:
+ return xgbe_phy_check_mode(pdata, mode,
+ ADVERTISED_10000baseKR_Full);
+ default:
+ return false;
+ }
+}
+
+static bool xgbe_phy_valid_speed(struct xgbe_prv_data *pdata, int speed)
+{
+ struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+ switch (speed) {
+ case SPEED_1000:
+ if (phy_data->speed_set != XGBE_SPEEDSET_1000_10000)
+ return false;
+ return true;
+ case SPEED_2500:
+ if (phy_data->speed_set != XGBE_SPEEDSET_2500_10000)
+ return false;
+ return true;
+ case SPEED_10000:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static int xgbe_phy_link_status(struct xgbe_prv_data *pdata)
+{
+ unsigned int reg;
+
+ /* Link status is latched low, so read once to clear
+ * and then read again to get current state
+ */
+ reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
+ reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
+
+ return (reg & MDIO_STAT1_LSTATUS) ? 1 : 0;
+}
+
+static void xgbe_phy_stop(struct xgbe_prv_data *pdata)
+{
+ /* Nothing uniquely required for stop */
+}
+
+static int xgbe_phy_start(struct xgbe_prv_data *pdata)
+{
+ /* Nothing uniquely required for start */
+ return 0;
+}
+
+static int xgbe_phy_reset(struct xgbe_prv_data *pdata)
+{
+ unsigned int reg, count;
+
+ /* Perform a software reset of the PCS */
+ reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+ reg |= MDIO_CTRL1_RESET;
+ XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+ count = 50;
+ do {
+ msleep(20);
+ reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+ } while ((reg & MDIO_CTRL1_RESET) && --count);
+
+ if (reg & MDIO_CTRL1_RESET)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static void xgbe_phy_exit(struct xgbe_prv_data *pdata)
+{
+ /* Nothing uniquely required for exit */
+}
+
+static int xgbe_phy_init(struct xgbe_prv_data *pdata)
+{
+ struct xgbe_phy_data *phy_data;
+ int ret;
+
+ phy_data = devm_kzalloc(pdata->dev, sizeof(*phy_data), GFP_KERNEL);
+ if (!phy_data)
+ return -ENOMEM;
+
+ /* Retrieve the PHY speedset */
+ ret = device_property_read_u32(pdata->phy_dev, XGBE_SPEEDSET_PROPERTY,
+ &phy_data->speed_set);
+ if (ret) {
+ dev_err(pdata->dev, "invalid %s property\n",
+ XGBE_SPEEDSET_PROPERTY);
+ return ret;
+ }
+
+ switch (phy_data->speed_set) {
+ case XGBE_SPEEDSET_1000_10000:
+ case XGBE_SPEEDSET_2500_10000:
+ break;
+ default:
+ dev_err(pdata->dev, "invalid %s property\n",
+ XGBE_SPEEDSET_PROPERTY);
+ return -EINVAL;
+ }
+
+ /* Retrieve the PHY configuration properties */
+ if (device_property_present(pdata->phy_dev, XGBE_BLWC_PROPERTY)) {
+ ret = device_property_read_u32_array(pdata->phy_dev,
+ XGBE_BLWC_PROPERTY,
+ phy_data->blwc,
+ XGBE_SPEEDS);
+ if (ret) {
+ dev_err(pdata->dev, "invalid %s property\n",
+ XGBE_BLWC_PROPERTY);
+ return ret;
+ }
+ } else {
+ memcpy(phy_data->blwc, xgbe_phy_blwc,
+ sizeof(phy_data->blwc));
+ }
+
+ if (device_property_present(pdata->phy_dev, XGBE_CDR_RATE_PROPERTY)) {
+ ret = device_property_read_u32_array(pdata->phy_dev,
+ XGBE_CDR_RATE_PROPERTY,
+ phy_data->cdr_rate,
+ XGBE_SPEEDS);
+ if (ret) {
+ dev_err(pdata->dev, "invalid %s property\n",
+ XGBE_CDR_RATE_PROPERTY);
+ return ret;
+ }
+ } else {
+ memcpy(phy_data->cdr_rate, xgbe_phy_cdr_rate,
+ sizeof(phy_data->cdr_rate));
+ }
+
+ if (device_property_present(pdata->phy_dev, XGBE_PQ_SKEW_PROPERTY)) {
+ ret = device_property_read_u32_array(pdata->phy_dev,
+ XGBE_PQ_SKEW_PROPERTY,
+ phy_data->pq_skew,
+ XGBE_SPEEDS);
+ if (ret) {
+ dev_err(pdata->dev, "invalid %s property\n",
+ XGBE_PQ_SKEW_PROPERTY);
+ return ret;
+ }
+ } else {
+ memcpy(phy_data->pq_skew, xgbe_phy_pq_skew,
+ sizeof(phy_data->pq_skew));
+ }
+
+ if (device_property_present(pdata->phy_dev, XGBE_TX_AMP_PROPERTY)) {
+ ret = device_property_read_u32_array(pdata->phy_dev,
+ XGBE_TX_AMP_PROPERTY,
+ phy_data->tx_amp,
+ XGBE_SPEEDS);
+ if (ret) {
+ dev_err(pdata->dev, "invalid %s property\n",
+ XGBE_TX_AMP_PROPERTY);
+ return ret;
+ }
+ } else {
+ memcpy(phy_data->tx_amp, xgbe_phy_tx_amp,
+ sizeof(phy_data->tx_amp));
+ }
+
+ if (device_property_present(pdata->phy_dev, XGBE_DFE_CFG_PROPERTY)) {
+ ret = device_property_read_u32_array(pdata->phy_dev,
+ XGBE_DFE_CFG_PROPERTY,
+ phy_data->dfe_tap_cfg,
+ XGBE_SPEEDS);
+ if (ret) {
+ dev_err(pdata->dev, "invalid %s property\n",
+ XGBE_DFE_CFG_PROPERTY);
+ return ret;
+ }
+ } else {
+ memcpy(phy_data->dfe_tap_cfg, xgbe_phy_dfe_tap_cfg,
+ sizeof(phy_data->dfe_tap_cfg));
+ }
+
+ if (device_property_present(pdata->phy_dev, XGBE_DFE_ENA_PROPERTY)) {
+ ret = device_property_read_u32_array(pdata->phy_dev,
+ XGBE_DFE_ENA_PROPERTY,
+ phy_data->dfe_tap_ena,
+ XGBE_SPEEDS);
+ if (ret) {
+ dev_err(pdata->dev, "invalid %s property\n",
+ XGBE_DFE_ENA_PROPERTY);
+ return ret;
+ }
+ } else {
+ memcpy(phy_data->dfe_tap_ena, xgbe_phy_dfe_tap_ena,
+ sizeof(phy_data->dfe_tap_ena));
+ }
+
+ /* Initialize supported features */
+ pdata->phy.supported = SUPPORTED_Autoneg;
+ pdata->phy.supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+ pdata->phy.supported |= SUPPORTED_Backplane;
+ pdata->phy.supported |= SUPPORTED_10000baseKR_Full;
+ switch (phy_data->speed_set) {
+ case XGBE_SPEEDSET_1000_10000:
+ pdata->phy.supported |= SUPPORTED_1000baseKX_Full;
+ break;
+ case XGBE_SPEEDSET_2500_10000:
+ pdata->phy.supported |= SUPPORTED_2500baseX_Full;
+ break;
+ }
+
+ if (pdata->fec_ability & MDIO_PMA_10GBR_FECABLE_ABLE)
+ pdata->phy.supported |= SUPPORTED_10000baseR_FEC;
+
+ pdata->phy_data = phy_data;
+
+ return 0;
+}
+
+void xgbe_init_function_ptrs_phy_v1(struct xgbe_phy_if *phy_if)
+{
+ struct xgbe_phy_impl_if *phy_impl = &phy_if->phy_impl;
+
+ phy_impl->init = xgbe_phy_init;
+ phy_impl->exit = xgbe_phy_exit;
+
+ phy_impl->reset = xgbe_phy_reset;
+ phy_impl->start = xgbe_phy_start;
+ phy_impl->stop = xgbe_phy_stop;
+
+ phy_impl->link_status = xgbe_phy_link_status;
+
+ phy_impl->valid_speed = xgbe_phy_valid_speed;
+
+ phy_impl->use_mode = xgbe_phy_use_mode;
+ phy_impl->set_mode = xgbe_phy_set_mode;
+ phy_impl->get_mode = xgbe_phy_get_mode;
+ phy_impl->switch_mode = xgbe_phy_switch_mode;
+ phy_impl->cur_mode = xgbe_phy_cur_mode;
+
+ phy_impl->an_outcome = xgbe_phy_an_outcome;
+
+ phy_impl->kr_training_pre = xgbe_phy_kr_training_pre;
+ phy_impl->kr_training_post = xgbe_phy_kr_training_post;
+}
--- a/drivers/net/ethernet/amd/xgbe/xgbe.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe.h
@@ -129,7 +129,7 @@
#include <net/dcbnl.h>
#define XGBE_DRV_NAME "amd-xgbe"
-#define XGBE_DRV_VERSION "1.0.2"
+#define XGBE_DRV_VERSION "1.0.3"
#define XGBE_DRV_DESC "AMD 10 Gigabit Ethernet Driver"
/* Descriptor related defines */
@@ -183,12 +183,6 @@
#define XGBE_PHY_MODE_PROPERTY "phy-mode"
#define XGBE_DMA_IRQS_PROPERTY "amd,per-channel-interrupt"
#define XGBE_SPEEDSET_PROPERTY "amd,speed-set"
-#define XGBE_BLWC_PROPERTY "amd,serdes-blwc"
-#define XGBE_CDR_RATE_PROPERTY "amd,serdes-cdr-rate"
-#define XGBE_PQ_SKEW_PROPERTY "amd,serdes-pq-skew"
-#define XGBE_TX_AMP_PROPERTY "amd,serdes-tx-amp"
-#define XGBE_DFE_CFG_PROPERTY "amd,serdes-dfe-tap-config"
-#define XGBE_DFE_ENA_PROPERTY "amd,serdes-dfe-tap-enable"
/* Device-tree clock names */
#define XGBE_DMA_CLOCK "dma_clk"
@@ -251,40 +245,6 @@
#define XGBE_AN_PG_RCV 0x04
#define XGBE_AN_INT_MASK 0x07
-/* Rate-change complete wait/retry count */
-#define XGBE_RATECHANGE_COUNT 500
-
-/* Default SerDes settings */
-#define XGBE_SPEED_10000_BLWC 0
-#define XGBE_SPEED_10000_CDR 0x7
-#define XGBE_SPEED_10000_PLL 0x1
-#define XGBE_SPEED_10000_PQ 0x12
-#define XGBE_SPEED_10000_RATE 0x0
-#define XGBE_SPEED_10000_TXAMP 0xa
-#define XGBE_SPEED_10000_WORD 0x7
-#define XGBE_SPEED_10000_DFE_TAP_CONFIG 0x1
-#define XGBE_SPEED_10000_DFE_TAP_ENABLE 0x7f
-
-#define XGBE_SPEED_2500_BLWC 1
-#define XGBE_SPEED_2500_CDR 0x2
-#define XGBE_SPEED_2500_PLL 0x0
-#define XGBE_SPEED_2500_PQ 0xa
-#define XGBE_SPEED_2500_RATE 0x1
-#define XGBE_SPEED_2500_TXAMP 0xf
-#define XGBE_SPEED_2500_WORD 0x1
-#define XGBE_SPEED_2500_DFE_TAP_CONFIG 0x3
-#define XGBE_SPEED_2500_DFE_TAP_ENABLE 0x0
-
-#define XGBE_SPEED_1000_BLWC 1
-#define XGBE_SPEED_1000_CDR 0x2
-#define XGBE_SPEED_1000_PLL 0x0
-#define XGBE_SPEED_1000_PQ 0xa
-#define XGBE_SPEED_1000_RATE 0x3
-#define XGBE_SPEED_1000_TXAMP 0xf
-#define XGBE_SPEED_1000_WORD 0x1
-#define XGBE_SPEED_1000_DFE_TAP_CONFIG 0x3
-#define XGBE_SPEED_1000_DFE_TAP_ENABLE 0x0
-
struct xgbe_prv_data;
struct xgbe_packet_data {
@@ -504,8 +464,10 @@ enum xgbe_rx {
};
enum xgbe_mode {
- XGBE_MODE_KR = 0,
- XGBE_MODE_KX,
+ XGBE_MODE_KX_1000 = 0,
+ XGBE_MODE_KX_2500,
+ XGBE_MODE_KR,
+ XGBE_MODE_UNKNOWN,
};
enum xgbe_speedset {
@@ -601,9 +563,7 @@ struct xgbe_hw_if {
int (*read_mmd_regs)(struct xgbe_prv_data *, int, int);
void (*write_mmd_regs)(struct xgbe_prv_data *, int, int, int);
- int (*set_gmii_speed)(struct xgbe_prv_data *);
- int (*set_gmii_2500_speed)(struct xgbe_prv_data *);
- int (*set_xgmii_speed)(struct xgbe_prv_data *);
+ int (*set_speed)(struct xgbe_prv_data *, int);
void (*enable_tx)(struct xgbe_prv_data *);
void (*disable_tx)(struct xgbe_prv_data *);
@@ -684,9 +644,50 @@ struct xgbe_hw_if {
int (*set_rss_lookup_table)(struct xgbe_prv_data *, const u32 *);
};
+/* This structure represents implementation specific routines for an
+ * implementation of a PHY. All routines are required unless noted below.
+ * Optional routines:
+ * kr_training_pre, kr_training_post
+ */
+struct xgbe_phy_impl_if {
+ /* Perform Setup/teardown actions */
+ int (*init)(struct xgbe_prv_data *);
+ void (*exit)(struct xgbe_prv_data *);
+
+ /* Perform start/stop specific actions */
+ int (*reset)(struct xgbe_prv_data *);
+ int (*start)(struct xgbe_prv_data *);
+ void (*stop)(struct xgbe_prv_data *);
+
+ /* Return the link status */
+ int (*link_status)(struct xgbe_prv_data *);
+
+ /* Indicate if a particular speed is valid */
+ bool (*valid_speed)(struct xgbe_prv_data *, int);
+
+ /* Check if the specified mode can/should be used */
+ bool (*use_mode)(struct xgbe_prv_data *, enum xgbe_mode);
+ /* Switch the PHY into various modes */
+ void (*set_mode)(struct xgbe_prv_data *, enum xgbe_mode);
+ /* Retrieve mode needed for a specific speed */
+ enum xgbe_mode (*get_mode)(struct xgbe_prv_data *, int);
+ /* Retrieve new/next mode when trying to auto-negotiate */
+ enum xgbe_mode (*switch_mode)(struct xgbe_prv_data *);
+ /* Retrieve current mode */
+ enum xgbe_mode (*cur_mode)(struct xgbe_prv_data *);
+
+ /* Process results of auto-negotiation */
+ enum xgbe_mode (*an_outcome)(struct xgbe_prv_data *);
+
+ /* Pre/Post KR training enablement support */
+ void (*kr_training_pre)(struct xgbe_prv_data *);
+ void (*kr_training_post)(struct xgbe_prv_data *);
+};
+
struct xgbe_phy_if {
- /* For initial PHY setup */
- void (*phy_init)(struct xgbe_prv_data *);
+ /* For PHY setup/teardown */
+ int (*phy_init)(struct xgbe_prv_data *);
+ void (*phy_exit)(struct xgbe_prv_data *);
/* For PHY support when setting device up/down */
int (*phy_reset)(struct xgbe_prv_data *);
@@ -696,6 +697,12 @@ struct xgbe_phy_if {
/* For PHY support while device is up */
void (*phy_status)(struct xgbe_prv_data *);
int (*phy_config_aneg)(struct xgbe_prv_data *);
+
+ /* For PHY settings validation */
+ bool (*phy_valid_speed)(struct xgbe_prv_data *, int);
+
+ /* PHY implementation specific services */
+ struct xgbe_phy_impl_if phy_impl;
};
struct xgbe_desc_if {
@@ -755,11 +762,20 @@ struct xgbe_hw_features {
unsigned int aux_snap_num; /* Number of Aux snapshot inputs */
};
+struct xgbe_version_data {
+ void (*init_function_ptrs_phy_impl)(struct xgbe_phy_if *);
+};
+
struct xgbe_prv_data {
struct net_device *netdev;
struct platform_device *pdev;
struct acpi_device *adev;
struct device *dev;
+ struct platform_device *phy_pdev;
+ struct device *phy_dev;
+
+ /* Version related data */
+ struct xgbe_version_data *vdata;
/* ACPI or DT flag */
unsigned int use_acpi;
@@ -901,6 +917,8 @@ struct xgbe_prv_data {
int phy_speed;
/* MDIO/PHY related settings */
+ unsigned int phy_started;
+ void *phy_data;
struct xgbe_phy phy;
int mdio_mmd;
unsigned long link_check;
@@ -911,21 +929,6 @@ struct xgbe_prv_data {
int an_irq;
struct work_struct an_irq_work;
- unsigned int speed_set;
-
- /* SerDes UEFI configurable settings.
- * Switching between modes/speeds requires new values for some
- * SerDes settings. The values can be supplied as device
- * properties in array format. The first array entry is for
- * 1GbE, second for 2.5GbE and third for 10GbE
- */
- u32 serdes_blwc[XGBE_SPEEDS];
- u32 serdes_cdr_rate[XGBE_SPEEDS];
- u32 serdes_pq_skew[XGBE_SPEEDS];
- u32 serdes_tx_amp[XGBE_SPEEDS];
- u32 serdes_dfe_tap_cfg[XGBE_SPEEDS];
- u32 serdes_dfe_tap_ena[XGBE_SPEEDS];
-
/* Auto-negotiation state machine support */
unsigned int an_int;
struct mutex an_mutex;
@@ -955,6 +958,7 @@ struct xgbe_prv_data {
void xgbe_init_function_ptrs_dev(struct xgbe_hw_if *);
void xgbe_init_function_ptrs_phy(struct xgbe_phy_if *);
+void xgbe_init_function_ptrs_phy_v1(struct xgbe_phy_if *);
void xgbe_init_function_ptrs_desc(struct xgbe_desc_if *);
const struct net_device_ops *xgbe_get_netdev_ops(void);
const struct ethtool_ops *xgbe_get_ethtool_ops(void);