Re: [PATCH v4 1/7] pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers

[Rob Herring]

On Wed, Apr 05, 2017 at 05:18:02PM +0200, Gregory CLEMENT wrote:
> Document the device tree binding for the pin controllers found on the
> Armada 37xx SoCs.
> 
> Update the binding documention of the xtal clk which is a subnode of this
> syscon node.
> 
> Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt         |   7 +--
>  Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt | 183 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
>  2 files changed, 187 insertions(+), 3 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
> index a88f1f05fbd6..4c0807f28cfa 100644
> --- a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
> @@ -5,6 +5,7 @@ reading the gpio latch register.
>  
>  This node must be a subnode of the node exposing the register address
>  of the GPIO block where the gpio latch is located.
> +See Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
>  
>  Required properties:
>  - compatible : shall be one of the following:
> @@ -16,9 +17,9 @@ Optional properties:
>  	output names ("xtal")
>  
>  Example:
> -gpio1: gpio@13800 {
> -	compatible = "marvell,armada-3700-gpio", "syscon", "simple-mfd";
> -	reg = <0x13800 0x1000>;
> +pinctrl_nb: pinctrl-nb@13800 {
> +	compatible = "armada3710-nb-pinctrl", "syscon", "simple-mfd";
> +	reg = <0x13800 0x100>, <0x13C00 0x20>;
>  
>  	xtalclk: xtal-clk {
>  		compatible = "marvell,armada-3700-xtal-clock";
> diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
> new file mode 100644
> index 000000000000..2eda81e0bca1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
> @@ -0,0 +1,183 @@
> +* Marvell Armada 37xx SoC pin and gpio controller
> +
> +Each Armada 37xx SoC come with two pin and gpio controller one for the
> +south bridge and the other for the north bridge.
> +
> +Inside this set of register the gpio latch allows exposing some
> +configuration of the SoC and especially the clock frequency of the
> +xtal. Hence, this node is a represent as syscon allowing sharing the
> +register between multiple hardware block.
> +
> +GPIO and pin controller:
> +------------------------
> +
> +Main node:
> +
> +Refer to pinctrl-bindings.txt in this directory for details of the
> +common pinctrl bindings used by client devices, including the meaning
> +of the phrase "pin configuration node".
> +
> +Required properties for pinctrl driver:
> +
> +- compatible:	"marvell,armada3710-sb-pinctrl", "syscon, "simple-mfd"
> +		for the south bridge
> +		"marvell,armada3710-nb-pinctrl", "syscon, "simple-mfd"
> +		for the north bridge
> +- reg: The first set of register are for pinctrl/gpio and the second
> +  set for the interrupt controller
> +- interrupts: list of the interrupt use by the gpio
> +
> +Available groups and functions for the North bridge:
> +
> +group: jtag
> + - pins 20-24
> + - functions jtag, gpio
> +
> +group sdio0
> + - pins 8-10
> + - functions sdio, gpio
> +
> +group emmc_nb
> + - pins 27-35
> + - functions emmc, gpio
> +
> +group pwm0
> + - pin 11 (GPIO1-11)
> + - functions pwm, gpio
> +
> +group pwm1
> + - pin 12
> + - functions pwm, gpio
> +
> +group pwm2
> + - pin 13
> + - functions pwm, gpio
> +
> +group pwm3
> + - pin 14
> + - functions pwm, gpio
> +
> +group pmic1
> + - pin 17
> + - functions pmic, gpio
> +
> +group pmic0
> + - pin 16
> + - functions pmic, gpio
> +
> +group i2c2
> + - pins 2-3
> + - functions i2c, gpio
> +
> +group i2c1
> + - pins 0-1
> + - functions i2c, gpio
> +
> +group spi_cs1
> + - pin 17
> + - functions spi, gpio
> +
> +group spi_cs2
> + - pin 18
> + - functions spi, gpio
> +
> +group spi_cs3
> + - pin 19
> + - functions spi, gpio
> +
> +group onewire
> + - pin 4
> + - functions onewire, gpio
> +
> +group uart1
> + - pins 25-26
> + - functions uart, gpio
> +
> +group spi_quad
> + - pins 15-16
> + - functions spi, gpio
> +
> +group uart_2
> + - pins 9-10
> + - functions uart, gpio
> +
> +Available groups and functions for the South bridge:
> +
> +group usb32_drvvbus0
> + - pin 36
> + - functions drvbus, gpio
> +
> +group usb2_drvvbus1
> + - pin 37
> + - functions drvbus, gpio
> +
> +group sdio_sb
> + - pins 60-64
> + - functions sdio, gpio
> +
> +group rgmii
> + - pins 42-55
> + - functions mii, gpio
> +
> +group pcie1
> + - pins 39-40
> + - functions pcie, gpio
> +
> +group ptp
> + - pins 56-58
> + - functions ptp, gpio
> +
> +group ptp_clk
> + - pin 57
> + - functions ptp, mii
> +
> +group ptp_trig
> + - pin 58
> + - functions ptp, mii
> +
> +group mii_col
> + - pin 59
> + - functions mii, mii_err
> +
> +GPIO subnode:
> +
> +Please refer to gpio.txt in this directory for details of gpio-ranges property
> +and the common GPIO bindings used by client devices.
> +
> +Required properties for gpio driver under the gpio subnode:
> +- interrupts: List of interrupt specifier for the controllers interrupt.
> +- gpio-controller: Marks the device node as a gpio controller.
> +- #gpio-cells: Should be 2. The first cell is the GPIO number and the
> +   second cell specifies GPIO flags, as defined in
> +   <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH and
> +   GPIO_ACTIVE_LOW flags are supported.
> +- gpio-ranges: Range of pins managed by the GPIO controller.
> +
> +Xtal Clock bindings for Marvell Armada 37xx SoCs
> +------------------------------------------------
> +
> +see Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
> +
> +
> +Example:
> +pinctrl_sb: pinctrl-sb@18800 {

Just pinctrl@...

> +	compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd";
> +	reg = <0x18800 0x100>, <0x18C00 0x20>;
> +	gpiosb: gpiosb {

gpio {

With that,

Acked-by: Rob Herring <robh@xxxxxxxxxx>


> +		#gpio-cells = <2>;
> +		gpio-ranges = <&pinctrl_sb 0 0 29>;
> +		gpio-controller;
> +		interrupts =
> +		<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
> +		<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
> +		<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
> +		<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
> +		<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	rgmii_pins: mii-pins {
> +		groups = "rgmii";
> +		function = "mii";
> +	};
> +
> +};
> -- 
> git-series 0.9.1