Re: [PATCH RFC 2/4] coresight: tmc: set read pointer before dump RAM
From: Chunyan Zhang
Date: Tue Apr 11 2017 - 07:25:36 EST
On 11 April 2017 at 17:10, Leo Yan <leo.yan@xxxxxxxxxx> wrote:
> When dump RAM, we need set read pointer so can make sure every time read
> the consistent content. If the RAM is full by checking status register
> (STS), so set the read pointer to same value with write pointer,
> otherwise set read point to 0 so can read from the start of RAM.
>
> Cc: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
> Cc: Mike Leach <mike.leach@xxxxxxxxxx>
> Cc: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
> Signed-off-by: Leo Yan <leo.yan@xxxxxxxxxx>
> ---
> drivers/hwtracing/coresight/coresight-tmc-etf.c | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/drivers/hwtracing/coresight/coresight-tmc-etf.c b/drivers/hwtracing/coresight/coresight-tmc-etf.c
> index 6150dac..43cfeaa 100644
> --- a/drivers/hwtracing/coresight/coresight-tmc-etf.c
> +++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c
> @@ -43,10 +43,28 @@ static void tmc_etb_enable_hw(struct tmc_drvdata *drvdata)
>
> static void tmc_etb_dump_hw(struct tmc_drvdata *drvdata)
> {
> + u32 write_ptr, status;
> char *bufp;
> u32 read_data;
> int i;
>
> + write_ptr = readl_relaxed(drvdata->base + TMC_RWP);
Since 'write_ptr' is only used in the below 'if' branch, I would
suggest to move this statement into that.
Regards,
Chunyan
> +
> + /*
> + * Get a hold of the status register and see if a wrap around
> + * has occurred. If so adjust things accordingly.
> + */
> + status = readl_relaxed(drvdata->base + TMC_STS);
> + if (status & TMC_STS_FULL)
> + /* Tell the HW the reading start point */
> + writel_relaxed(write_ptr, drvdata->base + TMC_RRP);
> + else
> + /*
> + * In case this is not first time to read ETB RAM,
> + * always write 0 for reading pointer.
> + */
> + writel_relaxed(0x0, drvdata->base + TMC_RRP);
> +
> bufp = drvdata->buf;
> drvdata->len = 0;
> while (1) {
> --
> 2.7.4
>