Re: [PATCH 1/2] mtd: dataflash: Make use of "extened device information"

From: Marek Vasut
Date: Tue Apr 11 2017 - 14:29:42 EST

Next message: SF Markus Elfring: "[PATCH 2/2] tty-goldfish: Adjust five checks for null pointers"
Previous message: SF Markus Elfring: "[PATCH 1/2] tty-goldfish: Use kcalloc() in goldfish_tty_create_driver()"
In reply to: Andrey Smirnov: "[PATCH 2/2] mtd: dataflash: Add flash_info for AT45DB641E"
Next in thread: Andrey Smirnov: "Re: [PATCH 1/2] mtd: dataflash: Make use of "extened device information""
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 04/11/2017 06:17 PM, Andrey Smirnov wrote:
> In anticipation of supporting chips that need it, extend the size of
> struct flash_info's 'jedec_id' field to make room 2 byte of extended
> device information as well as add code to fetch this data during
> jedec_probe().
>
> Cc: cphealy@xxxxxxxxx
> Cc: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
> Cc: Brian Norris <computersforpeace@xxxxxxxxx>
> Cc: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
> Cc: Marek Vasut <marek.vasut@xxxxxxxxx>
> Cc: Richard Weinberger <richard@xxxxxx>
> Cc: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
> ---
> drivers/mtd/devices/mtd_dataflash.c | 113 +++++++++++++++++++++---------------
> 1 file changed, 66 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
> index f9e9bd1..9a98cdc 100644
> --- a/drivers/mtd/devices/mtd_dataflash.c
> +++ b/drivers/mtd/devices/mtd_dataflash.c
> @@ -689,7 +689,7 @@ struct flash_info {
> /* JEDEC id has a high byte of zero plus three data bytes:
> * the manufacturer id, then a two byte device id.
> */
> - uint32_t jedec_id;
> + uint64_t jedec_id;
>
> /* The size listed here is what works with OP_ERASE_PAGE. */
> unsigned nr_pages;
> @@ -712,61 +712,35 @@ static struct flash_info dataflash_data[] = {
> * These newer chips also support 128-byte security registers (with
> * 64 bytes one-time-programmable) and software write-protection.
> */
> - { "AT45DB011B", 0x1f2200, 512, 264, 9, SUP_POW2PS},
> - { "at45db011d", 0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS},
> + { "AT45DB011B", 0x1f22000000, 512, 264, 9, SUP_POW2PS},
> + { "at45db011d", 0x1f22000000, 512, 256, 8, SUP_POW2PS | IS_POW2PS},
>
> - { "AT45DB021B", 0x1f2300, 1024, 264, 9, SUP_POW2PS},
> - { "at45db021d", 0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS},
> + { "AT45DB021B", 0x1f23000000, 1024, 264, 9, SUP_POW2PS},
> + { "at45db021d", 0x1f23000000, 1024, 256, 8, SUP_POW2PS | IS_POW2PS},
>
> - { "AT45DB041x", 0x1f2400, 2048, 264, 9, SUP_POW2PS},
> - { "at45db041d", 0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS},
> + { "AT45DB041x", 0x1f24000000, 2048, 264, 9, SUP_POW2PS},
> + { "at45db041d", 0x1f24000000, 2048, 256, 8, SUP_POW2PS | IS_POW2PS},
>
> - { "AT45DB081B", 0x1f2500, 4096, 264, 9, SUP_POW2PS},
> - { "at45db081d", 0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS},
> + { "AT45DB081B", 0x1f25000000, 4096, 264, 9, SUP_POW2PS},
> + { "at45db081d", 0x1f25000000, 4096, 256, 8, SUP_POW2PS | IS_POW2PS},
>
> - { "AT45DB161x", 0x1f2600, 4096, 528, 10, SUP_POW2PS},
> - { "at45db161d", 0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS},
> + { "AT45DB161x", 0x1f26000000, 4096, 528, 10, SUP_POW2PS},
> + { "at45db161d", 0x1f26000000, 4096, 512, 9, SUP_POW2PS | IS_POW2PS},
>
> - { "AT45DB321x", 0x1f2700, 8192, 528, 10, 0}, /* rev C */
> + { "AT45DB321x", 0x1f27000000, 8192, 528, 10, 0}, /* rev C */
>
> - { "AT45DB321x", 0x1f2701, 8192, 528, 10, SUP_POW2PS},
> - { "at45db321d", 0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS},
> + { "AT45DB321x", 0x1f27010000, 8192, 528, 10, SUP_POW2PS},
> + { "at45db321d", 0x1f27010000, 8192, 512, 9, SUP_POW2PS | IS_POW2PS},
>
> - { "AT45DB642x", 0x1f2800, 8192, 1056, 11, SUP_POW2PS},
> - { "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
> + { "AT45DB642x", 0x1f28000000, 8192, 1056, 11, SUP_POW2PS},
> + { "at45db642d", 0x1f28000000, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
> };
>
> -static struct flash_info *jedec_probe(struct spi_device *spi)
> +static struct flash_info *jedec_lookup(struct spi_device *spi,
> + uint64_t jedec)

const u64 (not uint64_t , this is NOT userspace). Fix globally.

> {
> - int tmp;
> - uint8_t code = OP_READ_ID;
> - uint8_t id[3];
> - uint32_t jedec;
> - struct flash_info *info;
> - int status;
> -
> - /* JEDEC also defines an optional "extended device information"
> - * string for after vendor-specific data, after the three bytes
> - * we use here. Supporting some chips might require using it.
> - *
> - * If the vendor ID isn't Atmel's (0x1f), assume this call failed.
> - * That's not an error; only rev C and newer chips handle it, and
> - * only Atmel sells these chips.
> - */
> - tmp = spi_write_then_read(spi, &code, 1, id, 3);
> - if (tmp < 0) {
> - pr_debug("%s: error %d reading JEDEC ID\n",
> - dev_name(&spi->dev), tmp);
> - return ERR_PTR(tmp);
> - }
> - if (id[0] != 0x1f)
> - return NULL;
> -
> - jedec = id[0];
> - jedec = jedec << 8;
> - jedec |= id[1];
> - jedec = jedec << 8;
> - jedec |= id[2];
> + int tmp, status;
> + struct flash_info *info;
>
> for (tmp = 0, info = dataflash_data;
> tmp < ARRAY_SIZE(dataflash_data);
> @@ -796,12 +770,57 @@ static struct flash_info *jedec_probe(struct spi_device *spi)
> }
> }
>
> + return NULL;
> +}
> +
> +static struct flash_info *jedec_probe(struct spi_device *spi)
> +{
> + int tmp;
> + uint8_t code = OP_READ_ID;
> + uint8_t id[8] = {0};
> + const unsigned int id_size = 5;
> + const unsigned int first_byte = sizeof(id) - id_size;
> + const uint64_t eid_mask = GENMASK_ULL(63, 16);

Can we have some macro, like DATAFLASH_ID_BYTES and derive all the masks
and crap from it instead of having this stack of variables ?

> + uint64_t jedec;
> + struct flash_info *info;

Replace the tab after the type with space please.

> + /* JEDEC also defines an optional "extended device information"

Multi-line comment format:

/*
* foo
* bar
*/

> + * string for after vendor-specific data, after the three bytes
> + * we use here. Supporting some chips might require using it.
> + *
> + * If the vendor ID isn't Atmel's (0x1f), assume this call failed.
> + * That's not an error; only rev C and newer chips handle it, and
> + * only Atmel sells these chips.
> + */
> + tmp = spi_write_then_read(spi, &code, 1, &id[first_byte], id_size);
> + if (tmp < 0) {

Use ret instead of tmp.

> + pr_debug("%s: error %d reading JEDEC ID\n",
> + dev_name(&spi->dev), tmp);
> + return ERR_PTR(tmp);
> + }

newline

> + if (id[first_byte] != 0x1f)

Use a macro, like CFI_MFR_ATMEL ?

> + return NULL;
> +
> + jedec = be64_to_cpup((__be64 *)id);
> +
> + info = jedec_lookup(spi, jedec);
> + if (info)
> + return info;
> + /*
> + * Clear extended id bits and try to find a match again
> + */

This could be a single-line comment.

> + jedec &= eid_mask;
> +
> + info = jedec_lookup(spi, jedec);
> + if (info)
> + return info;
> +
> /*
> * Treat other chips as errors ... we won't know the right page
> * size (it might be binary) even when we can tell which density
> * class is involved (legacy chip id scheme).
> */
> - dev_warn(&spi->dev, "JEDEC id %06x not handled\n", jedec);
> + dev_warn(&spi->dev, "JEDEC id %010llx not handled\n", jedec);
> return ERR_PTR(-ENODEV);
> }
>
>

--
Best regards,
Marek Vasut

Next message: SF Markus Elfring: "[PATCH 2/2] tty-goldfish: Adjust five checks for null pointers"
Previous message: SF Markus Elfring: "[PATCH 1/2] tty-goldfish: Use kcalloc() in goldfish_tty_create_driver()"
In reply to: Andrey Smirnov: "[PATCH 2/2] mtd: dataflash: Add flash_info for AT45DB641E"
Next in thread: Andrey Smirnov: "Re: [PATCH 1/2] mtd: dataflash: Make use of "extened device information""
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]