[PATCH] spi: atmel: factorize reusable code for SPI controller init
From: Quentin Schulz
Date: Wed Apr 12 2017 - 03:05:19 EST
The SPI controller configuration during the init can be reused, for the
resume function for example.
Let's move this configuration to a separate function.
Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
drivers/spi/spi-atmel.c | 35 +++++++++++++++++++++--------------
1 file changed, 21 insertions(+), 14 deletions(-)
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 0e7712bac3b6..247d920a512f 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -1464,6 +1464,25 @@ static int atmel_spi_gpio_cs(struct platform_device *pdev)
return 0;
}
+static void atmel_spi_init(struct atmel_spi *as)
+{
+ spi_writel(as, CR, SPI_BIT(SWRST));
+ spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
+ if (as->caps.has_wdrbt) {
+ spi_writel(as, MR, SPI_BIT(WDRBT) | SPI_BIT(MODFDIS)
+ | SPI_BIT(MSTR));
+ } else {
+ spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS));
+ }
+
+ if (as->use_pdc)
+ spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
+ spi_writel(as, CR, SPI_BIT(SPIEN));
+
+ if (as->fifo_size)
+ spi_writel(as, CR, SPI_BIT(FIFOEN));
+}
+
static int atmel_spi_probe(struct platform_device *pdev)
{
struct resource *regs;
@@ -1572,26 +1591,14 @@ static int atmel_spi_probe(struct platform_device *pdev)
as->spi_clk = clk_get_rate(clk);
- spi_writel(as, CR, SPI_BIT(SWRST));
- spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
- if (as->caps.has_wdrbt) {
- spi_writel(as, MR, SPI_BIT(WDRBT) | SPI_BIT(MODFDIS)
- | SPI_BIT(MSTR));
- } else {
- spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS));
- }
-
- if (as->use_pdc)
- spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
- spi_writel(as, CR, SPI_BIT(SPIEN));
-
as->fifo_size = 0;
if (!of_property_read_u32(pdev->dev.of_node, "atmel,fifo-size",
&as->fifo_size)) {
dev_info(&pdev->dev, "Using FIFO (%u data)\n", as->fifo_size);
- spi_writel(as, CR, SPI_BIT(FIFOEN));
}
+ atmel_spi_init(as);
+
pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
--
2.11.0