[PATCH 28/29] clocksource/drivers/gemini: Rename Gemini timer to Faraday
From: Daniel Lezcano
Date: Sun Apr 16 2017 - 16:29:46 EST
From: Linus Walleij <linus.walleij@xxxxxxxxxx>
After some research it turns out that the "Gemini" timer is
actually a generic IP block from Faraday Technology named
FTTMR010, so as to not make things too confusing we need to
rename the driver and its symbols to make sense.
The implementation remains the same in this patch but we fix
the copy-paste error in the timer name "nomadik_mtu" as we're
at it.
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
---
drivers/clocksource/Kconfig | 7 +-
drivers/clocksource/Makefile | 2 +-
drivers/clocksource/timer-fttmr010.c | 276 ++++++++++++++++++++++++++++++++++
drivers/clocksource/timer-gemini.c | 277 -----------------------------------
4 files changed, 281 insertions(+), 281 deletions(-)
create mode 100644 drivers/clocksource/timer-fttmr010.c
delete mode 100644 drivers/clocksource/timer-gemini.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 483f3b1..7ca2c24 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -67,15 +67,16 @@ config DW_APB_TIMER_OF
select DW_APB_TIMER
select CLKSRC_OF
-config GEMINI_TIMER
- bool "Cortina Gemini timer driver" if COMPILE_TEST
+config FTTMR010_TIMER
+ bool "Faraday Technology timer driver" if COMPILE_TEST
depends on GENERIC_CLOCKEVENTS
depends on HAS_IOMEM
select CLKSRC_MMIO
select CLKSRC_OF
select MFD_SYSCON
help
- Enables support for the Gemini timer
+ Enables support for the Faraday Technology timer block
+ FTTMR010.
config ROCKCHIP_TIMER
bool "Rockchip timer driver" if COMPILE_TEST
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index d227d13..2b5b56a 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -17,7 +17,7 @@ obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
obj-$(CONFIG_DIGICOLOR_TIMER) += timer-digicolor.o
obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o
-obj-$(CONFIG_GEMINI_TIMER) += timer-gemini.o
+obj-$(CONFIG_FTTMR010_TIMER) += timer-fttmr010.o
obj-$(CONFIG_ROCKCHIP_TIMER) += rockchip_timer.o
obj-$(CONFIG_CLKSRC_NOMADIK_MTU) += nomadik-mtu.o
obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
diff --git a/drivers/clocksource/timer-fttmr010.c b/drivers/clocksource/timer-fttmr010.c
new file mode 100644
index 0000000..e37ec3d
--- /dev/null
+++ b/drivers/clocksource/timer-fttmr010.c
@@ -0,0 +1,276 @@
+/*
+ * Faraday Technology FTTMR010 timer driver
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@xxxxxxxxxx>
+ *
+ * Based on a rewrite of arch/arm/mach-gemini/timer.c:
+ * Copyright (C) 2001-2006 Storlink, Corp.
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@xxxxxxxxxxxx>
+ */
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/sched_clock.h>
+
+/*
+ * Relevant registers in the global syscon
+ */
+#define GLOBAL_STATUS 0x04
+#define CPU_AHB_RATIO_MASK (0x3 << 18)
+#define CPU_AHB_1_1 (0x0 << 18)
+#define CPU_AHB_3_2 (0x1 << 18)
+#define CPU_AHB_24_13 (0x2 << 18)
+#define CPU_AHB_2_1 (0x3 << 18)
+#define REG_TO_AHB_SPEED(reg) ((((reg) >> 15) & 0x7) * 10 + 130)
+
+/*
+ * Register definitions for the timers
+ */
+#define TIMER1_COUNT (0x00)
+#define TIMER1_LOAD (0x04)
+#define TIMER1_MATCH1 (0x08)
+#define TIMER1_MATCH2 (0x0c)
+#define TIMER2_COUNT (0x10)
+#define TIMER2_LOAD (0x14)
+#define TIMER2_MATCH1 (0x18)
+#define TIMER2_MATCH2 (0x1c)
+#define TIMER3_COUNT (0x20)
+#define TIMER3_LOAD (0x24)
+#define TIMER3_MATCH1 (0x28)
+#define TIMER3_MATCH2 (0x2c)
+#define TIMER_CR (0x30)
+#define TIMER_INTR_STATE (0x34)
+#define TIMER_INTR_MASK (0x38)
+
+#define TIMER_1_CR_ENABLE (1 << 0)
+#define TIMER_1_CR_CLOCK (1 << 1)
+#define TIMER_1_CR_INT (1 << 2)
+#define TIMER_2_CR_ENABLE (1 << 3)
+#define TIMER_2_CR_CLOCK (1 << 4)
+#define TIMER_2_CR_INT (1 << 5)
+#define TIMER_3_CR_ENABLE (1 << 6)
+#define TIMER_3_CR_CLOCK (1 << 7)
+#define TIMER_3_CR_INT (1 << 8)
+#define TIMER_1_CR_UPDOWN (1 << 9)
+#define TIMER_2_CR_UPDOWN (1 << 10)
+#define TIMER_3_CR_UPDOWN (1 << 11)
+#define TIMER_DEFAULT_FLAGS (TIMER_1_CR_UPDOWN | \
+ TIMER_3_CR_ENABLE | \
+ TIMER_3_CR_UPDOWN)
+
+#define TIMER_1_INT_MATCH1 (1 << 0)
+#define TIMER_1_INT_MATCH2 (1 << 1)
+#define TIMER_1_INT_OVERFLOW (1 << 2)
+#define TIMER_2_INT_MATCH1 (1 << 3)
+#define TIMER_2_INT_MATCH2 (1 << 4)
+#define TIMER_2_INT_OVERFLOW (1 << 5)
+#define TIMER_3_INT_MATCH1 (1 << 6)
+#define TIMER_3_INT_MATCH2 (1 << 7)
+#define TIMER_3_INT_OVERFLOW (1 << 8)
+#define TIMER_INT_ALL_MASK 0x1ff
+
+static unsigned int tick_rate;
+static void __iomem *base;
+
+static u64 notrace fttmr010_read_sched_clock(void)
+{
+ return readl(base + TIMER3_COUNT);
+}
+
+static int fttmr010_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ u32 cr;
+
+ /* Setup the match register */
+ cr = readl(base + TIMER1_COUNT);
+ writel(cr + cycles, base + TIMER1_MATCH1);
+ if (readl(base + TIMER1_COUNT) - cr > cycles)
+ return -ETIME;
+
+ return 0;
+}
+
+static int fttmr010_timer_shutdown(struct clock_event_device *evt)
+{
+ u32 cr;
+
+ /*
+ * Disable also for oneshot: the set_next() call will arm the timer
+ * instead.
+ */
+ /* Stop timer and interrupt. */
+ cr = readl(base + TIMER_CR);
+ cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
+ writel(cr, base + TIMER_CR);
+
+ /* Setup counter start from 0 */
+ writel(0, base + TIMER1_COUNT);
+ writel(0, base + TIMER1_LOAD);
+
+ /* enable interrupt */
+ cr = readl(base + TIMER_INTR_MASK);
+ cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2);
+ cr |= TIMER_1_INT_MATCH1;
+ writel(cr, base + TIMER_INTR_MASK);
+
+ /* start the timer */
+ cr = readl(base + TIMER_CR);
+ cr |= TIMER_1_CR_ENABLE;
+ writel(cr, base + TIMER_CR);
+
+ return 0;
+}
+
+static int fttmr010_timer_set_periodic(struct clock_event_device *evt)
+{
+ u32 period = DIV_ROUND_CLOSEST(tick_rate, HZ);
+ u32 cr;
+
+ /* Stop timer and interrupt */
+ cr = readl(base + TIMER_CR);
+ cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
+ writel(cr, base + TIMER_CR);
+
+ /* Setup timer to fire at 1/HT intervals. */
+ cr = 0xffffffff - (period - 1);
+ writel(cr, base + TIMER1_COUNT);
+ writel(cr, base + TIMER1_LOAD);
+
+ /* enable interrupt on overflow */
+ cr = readl(base + TIMER_INTR_MASK);
+ cr &= ~(TIMER_1_INT_MATCH1 | TIMER_1_INT_MATCH2);
+ cr |= TIMER_1_INT_OVERFLOW;
+ writel(cr, base + TIMER_INTR_MASK);
+
+ /* Start the timer */
+ cr = readl(base + TIMER_CR);
+ cr |= TIMER_1_CR_ENABLE;
+ cr |= TIMER_1_CR_INT;
+ writel(cr, base + TIMER_CR);
+
+ return 0;
+}
+
+/* Use TIMER1 as clock event */
+static struct clock_event_device fttmr010_clockevent = {
+ .name = "TIMER1",
+ /* Reasonably fast and accurate clock event */
+ .rating = 300,
+ .shift = 32,
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = fttmr010_timer_set_next_event,
+ .set_state_shutdown = fttmr010_timer_shutdown,
+ .set_state_periodic = fttmr010_timer_set_periodic,
+ .set_state_oneshot = fttmr010_timer_shutdown,
+ .tick_resume = fttmr010_timer_shutdown,
+};
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t fttmr010_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &fttmr010_clockevent;
+
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static struct irqaction fttmr010_timer_irq = {
+ .name = "Faraday FTTMR010 Timer Tick",
+ .flags = IRQF_TIMER,
+ .handler = fttmr010_timer_interrupt,
+};
+
+static int __init gemini_timer_of_init(struct device_node *np)
+{
+ static struct regmap *map;
+ int irq;
+ int ret;
+ u32 val;
+
+ map = syscon_regmap_lookup_by_phandle(np, "syscon");
+ if (IS_ERR(map)) {
+ pr_err("Can't get regmap for syscon handle");
+ return -ENODEV;
+ }
+ ret = regmap_read(map, GLOBAL_STATUS, &val);
+ if (ret) {
+ pr_err("Can't read syscon status register");
+ return -ENXIO;
+ }
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ pr_err("Can't remap registers");
+ return -ENXIO;
+ }
+ /* IRQ for timer 1 */
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq <= 0) {
+ pr_err("Can't parse IRQ");
+ return -EINVAL;
+ }
+
+ tick_rate = REG_TO_AHB_SPEED(val) * 1000000;
+ printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000);
+
+ tick_rate /= 6; /* APB bus run AHB*(1/6) */
+
+ switch (val & CPU_AHB_RATIO_MASK) {
+ case CPU_AHB_1_1:
+ printk(KERN_CONT "(1/1)\n");
+ break;
+ case CPU_AHB_3_2:
+ printk(KERN_CONT "(3/2)\n");
+ break;
+ case CPU_AHB_24_13:
+ printk(KERN_CONT "(24/13)\n");
+ break;
+ case CPU_AHB_2_1:
+ printk(KERN_CONT "(2/1)\n");
+ break;
+ }
+
+ /*
+ * Reset the interrupt mask and status
+ */
+ writel(TIMER_INT_ALL_MASK, base + TIMER_INTR_MASK);
+ writel(0, base + TIMER_INTR_STATE);
+ writel(TIMER_DEFAULT_FLAGS, base + TIMER_CR);
+
+ /*
+ * Setup free-running clocksource timer (interrupts
+ * disabled.)
+ */
+ writel(0, base + TIMER3_COUNT);
+ writel(0, base + TIMER3_LOAD);
+ writel(0, base + TIMER3_MATCH1);
+ writel(0, base + TIMER3_MATCH2);
+ clocksource_mmio_init(base + TIMER3_COUNT,
+ "fttmr010_clocksource", tick_rate,
+ 300, 32, clocksource_mmio_readl_up);
+ sched_clock_register(fttmr010_read_sched_clock, 32, tick_rate);
+
+ /*
+ * Setup clockevent timer (interrupt-driven.)
+ */
+ writel(0, base + TIMER1_COUNT);
+ writel(0, base + TIMER1_LOAD);
+ writel(0, base + TIMER1_MATCH1);
+ writel(0, base + TIMER1_MATCH2);
+ setup_irq(irq, &fttmr010_timer_irq);
+ fttmr010_clockevent.cpumask = cpumask_of(0);
+ clockevents_config_and_register(&fttmr010_clockevent, tick_rate,
+ 1, 0xffffffff);
+
+ return 0;
+}
+CLOCKSOURCE_OF_DECLARE(gemini, "cortina,gemini-timer", gemini_timer_of_init);
diff --git a/drivers/clocksource/timer-gemini.c b/drivers/clocksource/timer-gemini.c
deleted file mode 100644
index dda27b7..0000000
--- a/drivers/clocksource/timer-gemini.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- * Gemini timer driver
- * Copyright (C) 2017 Linus Walleij <linus.walleij@xxxxxxxxxx>
- *
- * Based on a rewrite of arch/arm/mach-gemini/timer.c:
- * Copyright (C) 2001-2006 Storlink, Corp.
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@xxxxxxxxxxxx>
- */
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
-#include <linux/clockchips.h>
-#include <linux/clocksource.h>
-#include <linux/sched_clock.h>
-
-/*
- * Relevant registers in the global syscon
- */
-#define GLOBAL_STATUS 0x04
-#define CPU_AHB_RATIO_MASK (0x3 << 18)
-#define CPU_AHB_1_1 (0x0 << 18)
-#define CPU_AHB_3_2 (0x1 << 18)
-#define CPU_AHB_24_13 (0x2 << 18)
-#define CPU_AHB_2_1 (0x3 << 18)
-#define REG_TO_AHB_SPEED(reg) ((((reg) >> 15) & 0x7) * 10 + 130)
-
-/*
- * Register definitions for the timers
- */
-#define TIMER1_COUNT (0x00)
-#define TIMER1_LOAD (0x04)
-#define TIMER1_MATCH1 (0x08)
-#define TIMER1_MATCH2 (0x0c)
-#define TIMER2_COUNT (0x10)
-#define TIMER2_LOAD (0x14)
-#define TIMER2_MATCH1 (0x18)
-#define TIMER2_MATCH2 (0x1c)
-#define TIMER3_COUNT (0x20)
-#define TIMER3_LOAD (0x24)
-#define TIMER3_MATCH1 (0x28)
-#define TIMER3_MATCH2 (0x2c)
-#define TIMER_CR (0x30)
-#define TIMER_INTR_STATE (0x34)
-#define TIMER_INTR_MASK (0x38)
-
-#define TIMER_1_CR_ENABLE (1 << 0)
-#define TIMER_1_CR_CLOCK (1 << 1)
-#define TIMER_1_CR_INT (1 << 2)
-#define TIMER_2_CR_ENABLE (1 << 3)
-#define TIMER_2_CR_CLOCK (1 << 4)
-#define TIMER_2_CR_INT (1 << 5)
-#define TIMER_3_CR_ENABLE (1 << 6)
-#define TIMER_3_CR_CLOCK (1 << 7)
-#define TIMER_3_CR_INT (1 << 8)
-#define TIMER_1_CR_UPDOWN (1 << 9)
-#define TIMER_2_CR_UPDOWN (1 << 10)
-#define TIMER_3_CR_UPDOWN (1 << 11)
-#define TIMER_DEFAULT_FLAGS (TIMER_1_CR_UPDOWN | \
- TIMER_3_CR_ENABLE | \
- TIMER_3_CR_UPDOWN)
-
-#define TIMER_1_INT_MATCH1 (1 << 0)
-#define TIMER_1_INT_MATCH2 (1 << 1)
-#define TIMER_1_INT_OVERFLOW (1 << 2)
-#define TIMER_2_INT_MATCH1 (1 << 3)
-#define TIMER_2_INT_MATCH2 (1 << 4)
-#define TIMER_2_INT_OVERFLOW (1 << 5)
-#define TIMER_3_INT_MATCH1 (1 << 6)
-#define TIMER_3_INT_MATCH2 (1 << 7)
-#define TIMER_3_INT_OVERFLOW (1 << 8)
-#define TIMER_INT_ALL_MASK 0x1ff
-
-static unsigned int tick_rate;
-static void __iomem *base;
-
-static u64 notrace gemini_read_sched_clock(void)
-{
- return readl(base + TIMER3_COUNT);
-}
-
-static int gemini_timer_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- u32 cr;
-
- /* Setup the match register */
- cr = readl(base + TIMER1_COUNT);
- writel(cr + cycles, base + TIMER1_MATCH1);
- if (readl(base + TIMER1_COUNT) - cr > cycles)
- return -ETIME;
-
- return 0;
-}
-
-static int gemini_timer_shutdown(struct clock_event_device *evt)
-{
- u32 cr;
-
- /*
- * Disable also for oneshot: the set_next() call will arm the timer
- * instead.
- */
- /* Stop timer and interrupt. */
- cr = readl(base + TIMER_CR);
- cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
- writel(cr, base + TIMER_CR);
-
- /* Setup counter start from 0 */
- writel(0, base + TIMER1_COUNT);
- writel(0, base + TIMER1_LOAD);
-
- /* enable interrupt */
- cr = readl(base + TIMER_INTR_MASK);
- cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2);
- cr |= TIMER_1_INT_MATCH1;
- writel(cr, base + TIMER_INTR_MASK);
-
- /* start the timer */
- cr = readl(base + TIMER_CR);
- cr |= TIMER_1_CR_ENABLE;
- writel(cr, base + TIMER_CR);
-
- return 0;
-}
-
-static int gemini_timer_set_periodic(struct clock_event_device *evt)
-{
- u32 period = DIV_ROUND_CLOSEST(tick_rate, HZ);
- u32 cr;
-
- /* Stop timer and interrupt */
- cr = readl(base + TIMER_CR);
- cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
- writel(cr, base + TIMER_CR);
-
- /* Setup timer to fire at 1/HT intervals. */
- cr = 0xffffffff - (period - 1);
- writel(cr, base + TIMER1_COUNT);
- writel(cr, base + TIMER1_LOAD);
-
- /* enable interrupt on overflow */
- cr = readl(base + TIMER_INTR_MASK);
- cr &= ~(TIMER_1_INT_MATCH1 | TIMER_1_INT_MATCH2);
- cr |= TIMER_1_INT_OVERFLOW;
- writel(cr, base + TIMER_INTR_MASK);
-
- /* Start the timer */
- cr = readl(base + TIMER_CR);
- cr |= TIMER_1_CR_ENABLE;
- cr |= TIMER_1_CR_INT;
- writel(cr, base + TIMER_CR);
-
- return 0;
-}
-
-/* Use TIMER1 as clock event */
-static struct clock_event_device gemini_clockevent = {
- .name = "TIMER1",
- /* Reasonably fast and accurate clock event */
- .rating = 300,
- .shift = 32,
- .features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = gemini_timer_set_next_event,
- .set_state_shutdown = gemini_timer_shutdown,
- .set_state_periodic = gemini_timer_set_periodic,
- .set_state_oneshot = gemini_timer_shutdown,
- .tick_resume = gemini_timer_shutdown,
-};
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &gemini_clockevent;
-
- evt->event_handler(evt);
- return IRQ_HANDLED;
-}
-
-static struct irqaction gemini_timer_irq = {
- .name = "Gemini Timer Tick",
- .flags = IRQF_TIMER,
- .handler = gemini_timer_interrupt,
-};
-
-static int __init gemini_timer_of_init(struct device_node *np)
-{
- static struct regmap *map;
- int irq;
- int ret;
- u32 val;
-
- map = syscon_regmap_lookup_by_phandle(np, "syscon");
- if (IS_ERR(map)) {
- pr_err("Can't get regmap for syscon handle");
- return -ENODEV;
- }
- ret = regmap_read(map, GLOBAL_STATUS, &val);
- if (ret) {
- pr_err("Can't read syscon status register");
- return -ENXIO;
- }
-
- base = of_iomap(np, 0);
- if (!base) {
- pr_err("Can't remap registers");
- return -ENXIO;
- }
- /* IRQ for timer 1 */
- irq = irq_of_parse_and_map(np, 0);
- if (irq <= 0) {
- pr_err("Can't parse IRQ");
- return -EINVAL;
- }
-
- tick_rate = REG_TO_AHB_SPEED(val) * 1000000;
- printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000);
-
- tick_rate /= 6; /* APB bus run AHB*(1/6) */
-
- switch (val & CPU_AHB_RATIO_MASK) {
- case CPU_AHB_1_1:
- printk(KERN_CONT "(1/1)\n");
- break;
- case CPU_AHB_3_2:
- printk(KERN_CONT "(3/2)\n");
- break;
- case CPU_AHB_24_13:
- printk(KERN_CONT "(24/13)\n");
- break;
- case CPU_AHB_2_1:
- printk(KERN_CONT "(2/1)\n");
- break;
- }
-
- /*
- * Reset the interrupt mask and status
- */
- writel(TIMER_INT_ALL_MASK, base + TIMER_INTR_MASK);
- writel(0, base + TIMER_INTR_STATE);
- writel(TIMER_DEFAULT_FLAGS, base + TIMER_CR);
-
- /*
- * Setup free-running clocksource timer (interrupts
- * disabled.)
- */
- writel(0, base + TIMER3_COUNT);
- writel(0, base + TIMER3_LOAD);
- writel(0, base + TIMER3_MATCH1);
- writel(0, base + TIMER3_MATCH2);
- clocksource_mmio_init(base + TIMER3_COUNT,
- "gemini_clocksource", tick_rate,
- 300, 32, clocksource_mmio_readl_up);
- sched_clock_register(gemini_read_sched_clock, 32, tick_rate);
-
- /*
- * Setup clockevent timer (interrupt-driven.)
- */
- writel(0, base + TIMER1_COUNT);
- writel(0, base + TIMER1_LOAD);
- writel(0, base + TIMER1_MATCH1);
- writel(0, base + TIMER1_MATCH2);
- setup_irq(irq, &gemini_timer_irq);
- gemini_clockevent.cpumask = cpumask_of(0);
- clockevents_config_and_register(&gemini_clockevent, tick_rate,
- 1, 0xffffffff);
-
- return 0;
-}
-CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "cortina,gemini-timer",
- gemini_timer_of_init);
--
2.7.4