[PATCH 2/3] clk: cs2000: tidyup DEVICE_CFG2 settings
From: Kuninori Morimoto
Date: Mon Apr 17 2017 - 22:19:55 EST
From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
DEVICE_CFG2 can select ratio from user defined ratio and LOCKCLK is
for it. But current driver sets fixed 0 value. This patch fixes it.
Note is that current cs2000 driver is using/supporting only ratio0
(= ch0) now.
DEVICE_CFG2 can select STATIC/DYNAMIC ratio mode, and current cs2000
driver is selecting STATIC mode, but it was not understandable on
current code. This patch also solve this issue.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
---
drivers/clk/clk-cs2000-cp.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/clk-cs2000-cp.c b/drivers/clk/clk-cs2000-cp.c
index a8fa6bd..f3ab0ca 100644
--- a/drivers/clk/clk-cs2000-cp.c
+++ b/drivers/clk/clk-cs2000-cp.c
@@ -48,7 +48,9 @@
#define AUTORMOD (1 << 3)
#define LOCKCLK(x) (((x) & 0x3) << 1)
#define LOCKCLK_MASK LOCKCLK(0x3)
-#define FRACNSRC (1 << 0)
+#define FRACNSRC_MASK (1 << 0)
+#define FRACNSRC_STATIC (0 << 0)
+#define FRACNSRC_DYNAMIC (1 << 1)
/* GLOBAL_CFG */
#define ENDEV2 (0x1)
@@ -267,8 +269,8 @@ static int cs2000_ratio_select(struct cs2000_priv *priv, int ch)
return ret;
ret = cs2000_bset(priv, DEVICE_CFG2,
- (AUTORMOD | LOCKCLK_MASK | FRACNSRC),
- 0);
+ (AUTORMOD | LOCKCLK_MASK | FRACNSRC_MASK),
+ (LOCKCLK(ch) | FRACNSRC_STATIC));
if (ret < 0)
return ret;
--
1.9.1