Re: [PATCH 2/4] input: xpad.rst: Don't use literal blocks inside footnotes

[Dmitry Torokhov]

On Mon, Apr 17, 2017 at 09:46:14AM -0300, Mauro Carvalho Chehab wrote:
> Unfortunately, Sphinx (or LaTeX) can't handle literal blocks
> inside footnotes. So, just use normal text for the two
> literal code-blocks that documents the output of
> /sys/kernel/debug/usb/devices for xpad devices.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>

Applied, thank you.

> ---
>  Documentation/input/devices/xpad.rst | 51 ++++++++++++++++++------------------
>  1 file changed, 25 insertions(+), 26 deletions(-)
> 
> diff --git a/Documentation/input/devices/xpad.rst b/Documentation/input/devices/xpad.rst
> index e19669fe5a80..c7c4e154bd34 100644
> --- a/Documentation/input/devices/xpad.rst
> +++ b/Documentation/input/devices/xpad.rst
> @@ -138,15 +138,37 @@ Driver Installation
>  
>  Once you have the adapter cable, if needed, and the controller connected
>  the xpad module should be auto loaded. To confirm you can cat
> -/sys/kernel/debug/usb/devices. There should be an entry like the one at the end [4]_.
> +/sys/kernel/debug/usb/devices. There should be an entry like those:
>  
> +.. code-block:: none
> +   :caption: dump from InterAct PowerPad Pro (Germany)
> +
> +    T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
> +    D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=32 #Cfgs=  1
> +    P:  Vendor=05fd ProdID=107a Rev= 1.00
> +    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> +    I:  If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=(none)
> +    E:  Ad=81(I) Atr=03(Int.) MxPS=  32 Ivl= 10ms
> +    E:  Ad=02(O) Atr=03(Int.) MxPS=  32 Ivl= 10ms
> +
> +.. code-block:: none
> +   :caption: dump from Redoctane Xbox Dance Pad (US)
> +
> +    T:  Bus=01 Lev=02 Prnt=09 Port=00 Cnt=01 Dev#= 10 Spd=12  MxCh= 0
> +    D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> +    P:  Vendor=0c12 ProdID=8809 Rev= 0.01
> +    S:  Product=XBOX DDR
> +    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> +    I:  If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=xpad
> +    E:  Ad=82(I) Atr=03(Int.) MxPS=  32 Ivl=4ms
> +    E:  Ad=02(O) Atr=03(Int.) MxPS=  32 Ivl=4ms
>  
>  
>  Supported Controllers
>  =====================
>  
>  For a full list of supported controllers and associated vendor and product
> -IDs see the xpad_device[] array[6].
> +IDs see the xpad_device[] array\ [4]_.
>  
>  As of the historic version 0.0.6 (2006-10-10) the following devices
>  were supported::
> @@ -202,30 +224,7 @@ References
>  .. [1] http://euc.jp/periphs/xbox-controller.ja.html (ITO Takayuki)
>  .. [2] http://xpad.xbox-scene.com/
>  .. [3] http://www.markosweb.com/www/xboxhackz.com/
> -.. [4] /sys/kernel/debug/usb/devices - dump from InterAct PowerPad Pro (Germany):
> -
> - ::
> -
> -    T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
> -    D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=32 #Cfgs=  1
> -    P:  Vendor=05fd ProdID=107a Rev= 1.00
> -    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> -    I:  If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=(none)
> -    E:  Ad=81(I) Atr=03(Int.) MxPS=  32 Ivl= 10ms
> -    E:  Ad=02(O) Atr=03(Int.) MxPS=  32 Ivl= 10ms
> -.. [5] /sys/kernel/debug/usb/devices - dump from Redoctane Xbox Dance Pad (US):
> -
> - ::
> -
> -    T:  Bus=01 Lev=02 Prnt=09 Port=00 Cnt=01 Dev#= 10 Spd=12  MxCh= 0
> -    D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> -    P:  Vendor=0c12 ProdID=8809 Rev= 0.01
> -    S:  Product=XBOX DDR
> -    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> -    I:  If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=xpad
> -    E:  Ad=82(I) Atr=03(Int.) MxPS=  32 Ivl=4ms
> -    E:  Ad=02(O) Atr=03(Int.) MxPS=  32 Ivl=4ms
> -.. [6] http://lxr.free-electrons.com/ident?i=xpad_device
> +.. [4] http://lxr.free-electrons.com/ident?i=xpad_device
>  
>  
>  Historic Edits
> -- 
> 2.9.3
> 

-- 
Dmitry