Re: Doubt on first access for PCIe device
From: Lorenzo Pieralisi
Date: Wed Apr 19 2017 - 06:26:25 EST
On Tue, Apr 11, 2017 at 07:45:40PM +0530, abhijit wrote:
>
> Hi All,
>
> I was referring Linux code for PCIe enumeration and I have one doubt
> w.r.t to very first operation that must be done on device.
>
> Currently while scanning for device, we directly read vendor ID from
> device. But PCIE base specification
> "CB-PCI_Express_Base_4.0r0.7_November-11-2016.pdf" section 2.2.6.2
> specifies that,
>
> "Functions must capture the Bus and Device Numbers supplied with all
> Type 0 Configuration Write Requests completed by the Function and
> supply these numbers in the Bus and Device Number fields of the
> Requester ID for all Requests initiated by the Device/Function."
Please note:
"for all Requests initiated by the Device/Function".
^^^^^^^^^
> Here I am assuming, the completer ID will be device number and
> function number that will eventually programmed in to device. In
> that case, my question is, without first write, how read
> request(VENDOR ID read) is serviced/routed?
That's not initiated by the endpoint device, it is routed by
requester ID, which is the requester ID of the configuration
request - ie master (ie root complex) requester ID.
Read 2.2.9 - Completion rules
HTH,
Lorenzo