[PATCH v3] fpga manager: Add Altera CvP driver
From: Anatolij Gustschin
Date: Thu Apr 20 2017 - 10:58:44 EST
Add FPGA manager driver for loading Arria/Cyclone/Stratix
FPGAs via CvP.
Signed-off-by: Anatolij Gustschin <agust@xxxxxxx>
---
Changes in v3:
- removed V-series from description (since the driver works
also with Arria-10). Also renamed functions, config option
and driver file name. Changed module description in Kconfig
- dropped 'firmware=' module option (does not allow to bypass
the fpga framework any more)
- fixed build warning with newer gcc
- changed to use hex numbers for PCI bus/device in registered
fpga manager name. Use more generic fpga manager name (no
V-series in the name any more)
- moved steps 16 to 18 from teardown func to write_complete()
as suggested by Yi
- rebased on linux-next and tested with Arria-10/Stratix-V
devices
Changes in v2:
- rebase for v4.10, change subject ("Stratix V" to "V series")
and add GPL header
- use BIT() in register bit macro definitions
- change .state() to return status or FPGA_MGR_STATE_UNKNOWN
- use unique name for registered FPGA manager (append "@B:D.F")
- use PCI_ANY_ID for device ID, users can set custom ID using
new_id sysfs interface
- remove map_base/map_len init and use pci_iomap() instead
- simplify to use pci_read_config_word() instead of
pci_bus_read_config_word()
- run fpga_mgr_put() after usage, so the module can be removed
without unbinding the driver
- access CVP_STATUS as a 32-bit register, update CVP_STATUS
bits macros
- check CONFIG_READY bit in write_init and perform a teardown
if this bit is set. Move teardown code to separate function
as suggested
- change function names to altera_v_*() as we can use
the driver with other V-series FPGAs. Also change
the driver file and Kconfig option names accordingly
- pad written firmware data if the file size is not a multiple of 4
- when config error checking is enabled, run checks after a 4KiB
chunk is written
- remove single built-in firmware string, add module parameter
to allow setting default firmware for multiple cards as a
Bus:Device.Function specific strings (optional)
- remove polling of non-existing data bits DATA_ENC, DATA_COMP.
Instead, add module parameter for bitstream specific clock to
data ratio setting
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile | 1 +
drivers/fpga/altera-cvp.c | 587 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 595 insertions(+)
create mode 100644 drivers/fpga/altera-cvp.c
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 161ba9d..be48c2e 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -26,6 +26,13 @@ config FPGA_MGR_ICE40_SPI
help
FPGA manager driver support for Lattice iCE40 FPGAs over SPI.
+config FPGA_MGR_ALTERA_CVP
+ tristate "Altera Arria/Cyclone/Stratix CvP FPGA Manager"
+ depends on PCI
+ help
+ FPGA manager driver support for Altera FPGAs using the
+ CvP interface over PCIe.
+
config FPGA_MGR_SOCFPGA
tristate "Altera SOCFPGA FPGA Manager"
depends on ARCH_SOCFPGA || COMPILE_TEST
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 2a4f021..2e5c8b6 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_FPGA) += fpga-mgr.o
# FPGA Manager Drivers
+obj-$(CONFIG_FPGA_MGR_ALTERA_CVP) += altera-cvp.o
obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o
obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o
obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o
diff --git a/drivers/fpga/altera-cvp.c b/drivers/fpga/altera-cvp.c
new file mode 100644
index 0000000..b146033
--- /dev/null
+++ b/drivers/fpga/altera-cvp.c
@@ -0,0 +1,587 @@
+/*
+ * FPGA Manager Driver for Altera Arria/Cyclone/Stratix CvP
+ *
+ * Copyright (C) 2017 DENX Software Engineering
+ *
+ * Anatolij Gustschin <agust@xxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Manage Altera FPGA firmware using PCIe CvP.
+ * Firmware must be in binary "rbf" format.
+ */
+
+#include <linux/delay.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/sizes.h>
+
+#define CVP_BAR 0 /* BAR used for data transfer in memory mode */
+#define CVP_DUMMY_WR 244 /* dummy writes to clear CvP state machine */
+#define TIMEOUT_IN_US 2000
+
+/* Vendor Specific Extended Capability Offset */
+#define VSEC_OFFSET 0x200
+#define VSEC_PCIE_EXT_CAP_ID_VAL 0x000b
+
+/* offsets from VSEC_OFFSET */
+#define VSEC_PCIE_EXT_CAP_ID (VSEC_OFFSET + 0x00) /* 16bit */
+#define VSEC_VERSION 0x02 /* 8bit */
+#define VSEC_NEXT_CAP_OFF 0x03 /* 8bit */
+#define VSEC_ID 0x04 /* 16bit */
+#define VSEC_REV 0x06 /* 8bit */
+#define VSEC_LENGTH 0x07 /* 8bit */
+#define VSEC_ALTERA_MARKER 0x08 /* 32bit */
+
+#define VSEC_CVP_STATUS (VSEC_OFFSET + 0x1c) /* 32bit */
+#define VSEC_CVP_STATUS_DATA_ENC BIT(16) /* is treated as encrypted */
+#define VSEC_CVP_STATUS_DATA_COMP BIT(17) /* is treated as compressed */
+#define VSEC_CVP_STATUS_CFG_RDY BIT(18) /* CVP_CONFIG_READY */
+#define VSEC_CVP_STATUS_CFG_ERR BIT(19) /* CVP_CONFIG_ERROR */
+#define VSEC_CVP_STATUS_CVP_EN BIT(20) /* ctrl block is enabling CVP */
+#define VSEC_CVP_STATUS_USERMODE BIT(21) /* USERMODE */
+#define VSEC_CVP_STATUS_CFG_DONE BIT(23) /* CVP_CONFIG_DONE */
+#define VSEC_CVP_STATUS_PLD_CLK_IN_USE BIT(24) /* PLD_CLK_IN_USE */
+
+#define VSEC_CVP_MODE_CTRL (VSEC_OFFSET + 0x20) /* 32bit */
+#define VSEC_CVP_MODE_CTRL_CVP_MODE BIT(0) /* CVP (1) or normal mode (0) */
+#define VSEC_CVP_MODE_CTRL_HIP_CLK_SEL BIT(1) /* PMA (1) or fabric clock (0) */
+#define VSEC_CVP_MODE_CTRL_FULL_CFG BIT(2) /* CVP_FULLCONFIG */
+#define VSEC_CVP_MODE_CTRL_NUMCLKS (0xff<<8) /* CVP_NUMCLKS */
+
+#define VSEC_CVP_DATA (VSEC_OFFSET + 0x28) /* 32bit */
+#define VSEC_CVP_PROG_CTRL (VSEC_OFFSET + 0x2c) /* 32bit */
+#define VSEC_CVP_PROG_CTRL_CONFIG BIT(0)
+#define VSEC_CVP_PROG_CTRL_START_XFER BIT(1)
+
+#define VSEC_UNCOR_ERR_STATUS (VSEC_OFFSET + 0x34) /* 32bit */
+#define VSEC_UNCOR_ERR_MASK (VSEC_OFFSET + 0x38) /* 32bit */
+#define VSEC_UNCOR_ERR_CVP_CFG_ERR BIT(5) /* CVP_CONFIG_ERROR_LATCHED */
+
+#define DRV_NAME "altera-cvp"
+#define ALTERA_CVP_MGR_NAME "Altera CvP FPGA Manager"
+
+static int chkcfg; /* use value 1 for debugging only */
+module_param(chkcfg, int, 0664);
+MODULE_PARM_DESC(chkcfg, "1 - check CvP status, 0 - skip checking (default 0)");
+
+static int numclks = 1; /* default 1 for uncompressed and unencrypted */
+module_param(numclks, int, 0664);
+MODULE_PARM_DESC(numclks, "Clock to data ratio 1, 4 or 8 (default 1)");
+
+struct altera_cvp_conf {
+ struct fpga_manager *mgr;
+ struct pci_dev *pci_dev;
+ void __iomem *map;
+ char mgr_name[64];
+};
+
+static inline void altera_cvp_chk_numclks(void)
+{
+ switch (numclks) {
+ case 1:
+ case 4:
+ case 8:
+ break;
+ default:
+ numclks = 1;
+ break;
+ }
+}
+
+static enum fpga_mgr_states altera_cvp_state(struct fpga_manager *mgr)
+{
+ struct altera_cvp_conf *conf = mgr->priv;
+ u32 status;
+
+ pci_read_config_dword(conf->pci_dev, VSEC_CVP_STATUS, &status);
+
+ if (status & VSEC_CVP_STATUS_CFG_DONE)
+ return FPGA_MGR_STATE_OPERATING;
+
+ if (status & VSEC_CVP_STATUS_CVP_EN)
+ return FPGA_MGR_STATE_POWER_UP;
+
+ return FPGA_MGR_STATE_UNKNOWN;
+}
+
+static int altera_cvp_teardown(struct fpga_manager *mgr,
+ struct fpga_image_info *info)
+{
+ struct altera_cvp_conf *conf = mgr->priv;
+ struct pci_dev *pdev = conf->pci_dev;
+ int status = 0;
+ int delay_us, i;
+ u32 val32;
+
+ /*
+ * STEP 12 - reset START_XFER bit
+ */
+ pci_read_config_dword(pdev, VSEC_CVP_PROG_CTRL, &val32);
+ val32 &= ~VSEC_CVP_PROG_CTRL_START_XFER;
+ pci_write_config_dword(pdev, VSEC_CVP_PROG_CTRL, val32);
+
+ /*
+ * STEP 13 - reset CVP_CONFIG bit
+ */
+ val32 &= ~VSEC_CVP_PROG_CTRL_CONFIG;
+ pci_write_config_dword(pdev, VSEC_CVP_PROG_CTRL, val32);
+
+ /*
+ * STEP 14
+ * - set CVP_NUMCLKS to 0x01 and then issue CVP_DUMMY_WR dummy
+ * writes to the HIP
+ */
+ pci_read_config_dword(pdev, VSEC_CVP_MODE_CTRL, &val32);
+ val32 &= ~VSEC_CVP_MODE_CTRL_NUMCLKS;
+ /* set number of CVP clock cycles for every CVP Data Register Write */
+ val32 |= 0x01 << 8; /* 1 clock */
+ pci_write_config_dword(pdev, VSEC_CVP_MODE_CTRL, val32);
+
+ /* dummy memory write to switch from CVP clock to internal clock */
+ val32 = 0xdeadbeef;
+ if (conf->map) {
+ u32 *map = conf->map;
+
+ for (i = 0; i < CVP_DUMMY_WR; i++)
+ *map++ = val32; /* use MemoryWrite */
+ } else {
+ for (i = 0; i < CVP_DUMMY_WR; i++)
+ pci_write_config_dword(pdev, VSEC_CVP_DATA, val32);
+ }
+
+ /*
+ * STEP 15 - poll CVP_CONFIG_READY bit
+ */
+ delay_us = 0;
+ while (1) {
+ pci_read_config_dword(pdev, VSEC_CVP_STATUS, &val32);
+ if ((val32 & VSEC_CVP_STATUS_CFG_RDY) == 0)
+ break;
+
+ udelay(1); /* wait 1us */
+
+ if (delay_us++ > TIMEOUT_IN_US) {
+ dev_warn(&mgr->dev, "CVP_CONFIG_READY == 0 timeout\n");
+ status = -ETIMEDOUT;
+ break;
+ }
+ }
+
+ return status;
+}
+
+static int altera_cvp_write_init(struct fpga_manager *mgr,
+ struct fpga_image_info *info,
+ const char *buf, size_t count)
+{
+ struct altera_cvp_conf *conf = mgr->priv;
+ struct pci_dev *pdev = conf->pci_dev;
+ int delay_us, i;
+ u32 val32;
+ int ret;
+
+ if (info && info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
+ dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
+ return -EINVAL;
+ }
+
+ /*
+ * STEP 1 - read CVP status and check CVP_EN flag
+ */
+ pci_read_config_dword(pdev, VSEC_CVP_STATUS, &val32);
+ if (!(val32 & VSEC_CVP_STATUS_CVP_EN)) {
+ dev_err(&mgr->dev, "CVP mode off: 0x%04x\n", val32);
+ return -ENODEV;
+ }
+
+ if (val32 & VSEC_CVP_STATUS_CFG_RDY) {
+ dev_warn(&mgr->dev, "CvP already started, teardown first\n");
+ ret = altera_cvp_teardown(mgr, info);
+ if (ret < 0)
+ return ret;
+ }
+
+ /*
+ * STEP 2
+ * - set HIP_CLK_SEL and CVP_MODE (must be set in the order mentioned)
+ */
+ /* switch from fabric to PMA clock */
+ pci_read_config_dword(pdev, VSEC_CVP_MODE_CTRL, &val32);
+ val32 |= VSEC_CVP_MODE_CTRL_HIP_CLK_SEL;
+ pci_write_config_dword(pdev, VSEC_CVP_MODE_CTRL, val32);
+
+ /* set CVP mode */
+ pci_read_config_dword(pdev, VSEC_CVP_MODE_CTRL, &val32);
+ val32 |= VSEC_CVP_MODE_CTRL_CVP_MODE;
+ pci_write_config_dword(pdev, VSEC_CVP_MODE_CTRL, val32);
+
+ /*
+ * STEP 3
+ * - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
+ */
+ pci_read_config_dword(pdev, VSEC_CVP_MODE_CTRL, &val32);
+ val32 &= ~VSEC_CVP_MODE_CTRL_NUMCLKS;
+ val32 |= 0x01 << 8; /* 1 clock */
+ pci_write_config_dword(pdev, VSEC_CVP_MODE_CTRL, val32);
+
+ /* dummy memory write to switch from internal clock to CVP clock */
+ val32 = 0xdeadbeef;
+ if (conf->map) {
+ u32 *map = conf->map;
+
+ for (i = 0; i < CVP_DUMMY_WR; i++)
+ *map++ = val32; /* use MemoryWrite */
+ } else {
+ for (i = 0; i < CVP_DUMMY_WR; i++)
+ pci_write_config_dword(pdev, VSEC_CVP_DATA, val32);
+ }
+
+ /*
+ * STEP 4 - set CVP_CONFIG bit
+ */
+ pci_read_config_dword(pdev, VSEC_CVP_PROG_CTRL, &val32);
+ /* request control block to begin transfer using CVP */
+ val32 |= VSEC_CVP_PROG_CTRL_CONFIG;
+ pci_write_config_dword(pdev, VSEC_CVP_PROG_CTRL, val32);
+
+ /*
+ * STEP 5 - poll CVP_CONFIG READY
+ */
+ delay_us = 0;
+ while (1) {
+ pci_read_config_dword(pdev, VSEC_CVP_STATUS, &val32);
+ if ((val32 & VSEC_CVP_STATUS_CFG_RDY) ==
+ VSEC_CVP_STATUS_CFG_RDY)
+ break;
+
+ udelay(1); /* wait 1us */
+
+ if (delay_us++ > TIMEOUT_IN_US) {
+ dev_warn(&mgr->dev, "CVP_CONFIG_READY == 1 timeout\n");
+ return -ETIMEDOUT;
+ }
+ }
+
+ /*
+ * STEP 6
+ * - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
+ */
+ pci_read_config_dword(pdev, VSEC_CVP_MODE_CTRL, &val32);
+ val32 &= ~VSEC_CVP_MODE_CTRL_NUMCLKS;
+ val32 |= 0x01 << 8; /* 1 clock */
+ pci_write_config_dword(pdev, VSEC_CVP_MODE_CTRL, val32);
+
+ /* dummy memory write to switch from internal clock to CVP clock */
+ val32 = 0xdeadbeef;
+ if (conf->map) {
+ u32 *map = conf->map;
+
+ for (i = 0; i < CVP_DUMMY_WR; i++)
+ *map++ = val32; /* use MemoryWrite */
+ } else {
+ for (i = 0; i < CVP_DUMMY_WR; i++)
+ pci_write_config_dword(pdev, VSEC_CVP_DATA, val32);
+ }
+
+ /*
+ * STEP 7 - set START_XFER
+ */
+ pci_read_config_dword(pdev, VSEC_CVP_PROG_CTRL, &val32);
+ val32 |= VSEC_CVP_PROG_CTRL_START_XFER;
+ pci_write_config_dword(pdev, VSEC_CVP_PROG_CTRL, val32);
+
+ /*
+ * STEP 8 - start transfer (set CVP_NUMCLKS)
+ */
+ altera_cvp_chk_numclks();
+ pci_read_config_dword(pdev, VSEC_CVP_MODE_CTRL, &val32);
+ val32 &= ~VSEC_CVP_MODE_CTRL_NUMCLKS;
+ val32 |= numclks << 8; /* bitstream specific clock count */
+ pci_write_config_dword(pdev, VSEC_CVP_MODE_CTRL, val32);
+
+ return 0;
+}
+
+static inline int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
+{
+ struct altera_cvp_conf *conf = mgr->priv;
+ u32 val32;
+
+ /*
+ * STEP 10 (optional) - check CVP_CONFIG_ERROR flag
+ */
+ pci_read_config_dword(conf->pci_dev, VSEC_CVP_STATUS, &val32);
+ if (val32 & VSEC_CVP_STATUS_CFG_ERR) {
+ dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zi bytes!\n",
+ bytes);
+ return -EPROTO;
+ }
+ return 0;
+}
+
+static int altera_cvp_write(struct fpga_manager *mgr, const char *buf,
+ size_t count)
+{
+ struct altera_cvp_conf *conf = mgr->priv;
+ struct pci_dev *pdev = conf->pci_dev;
+ const u32 *data;
+ size_t bytes = 0;
+ int status = 0;
+ u32 mask;
+ u32 *map;
+
+ /*
+ * STEP 9
+ * - write 32-bit configuration data from RBF file to CVP data register
+ */
+ data = (u32 *)buf;
+ map = conf->map;
+ bytes = count;
+
+ if (map) {
+ while (bytes >= 4) {
+ *map = *data++;
+ bytes -= 4;
+
+ /*
+ * STEP 10 (optional) and STEP 11
+ * - check error flag
+ * - loop until data transfer completed
+ */
+ if (chkcfg && !(bytes % SZ_4K)) {
+ size_t done = count - bytes;
+
+ status = altera_cvp_chk_error(mgr, done);
+ if (status < 0)
+ return status;
+ }
+ }
+ } else {
+ while (bytes >= 4) {
+ pci_write_config_dword(pdev, VSEC_CVP_DATA, *data++);
+ bytes -= 4;
+
+ if (chkcfg && !(bytes % SZ_4K)) {
+ size_t done = count - bytes;
+
+ status = altera_cvp_chk_error(mgr, done);
+ if (status < 0)
+ return status;
+ }
+ }
+ }
+
+ switch (bytes) {
+ case 3:
+ mask = 0x00ffffff;
+ break;
+ case 2:
+ mask = 0x0000ffff;
+ break;
+ case 1:
+ mask = 0x000000ff;
+ break;
+ case 0:
+ mask = 0x00000000;
+ break;
+ }
+
+ if (mask) {
+ u32 tail = *data & mask;
+
+ if (map)
+ *map = tail;
+ else
+ pci_write_config_dword(pdev, VSEC_CVP_DATA, tail);
+
+ if (chkcfg)
+ status = altera_cvp_chk_error(mgr, count);
+ }
+
+ return status;
+}
+
+static int altera_cvp_write_complete(struct fpga_manager *mgr,
+ struct fpga_image_info *info)
+{
+ struct altera_cvp_conf *conf = mgr->priv;
+ struct pci_dev *pdev = conf->pci_dev;
+ int status;
+ int delay_us;
+ u32 status_msk;
+ u32 val32;
+
+ status = altera_cvp_teardown(mgr, info);
+ if (status < 0)
+ return status;
+
+ /*
+ * STEP 16 - check CVP_CONFIG_ERROR_LATCHED bit
+ */
+ pci_read_config_dword(pdev, VSEC_UNCOR_ERR_STATUS, &val32);
+ if (val32 & VSEC_UNCOR_ERR_CVP_CFG_ERR) {
+ dev_err(&mgr->dev, "detected CVP_CONFIG_ERROR_LATCHED!\n");
+ return -EFAULT;
+ }
+
+ /*
+ * STEP 17 - reset CVP_MODE and HIP_CLK_SEL bit
+ */
+ pci_read_config_dword(pdev, VSEC_CVP_MODE_CTRL, &val32);
+ val32 &= ~VSEC_CVP_MODE_CTRL_HIP_CLK_SEL;
+ val32 &= ~VSEC_CVP_MODE_CTRL_CVP_MODE;
+ pci_write_config_dword(pdev, VSEC_CVP_MODE_CTRL, val32);
+
+ /*
+ * STEP 18 - poll PLD_CLK_IN_USE and USER_MODE bits
+ */
+ delay_us = 0;
+ status_msk = VSEC_CVP_STATUS_PLD_CLK_IN_USE | VSEC_CVP_STATUS_USERMODE;
+ while (1) {
+ pci_read_config_dword(pdev, VSEC_CVP_STATUS, &val32);
+ if ((val32 & status_msk) == status_msk)
+ break;
+
+ udelay(1); /* wait 1us */
+
+ if (delay_us++ > TIMEOUT_IN_US) {
+ dev_warn(&mgr->dev, "PLD_CLK_IN_USE|USERMODE timeout\n");
+ status = -ETIMEDOUT;
+ break;
+ }
+ }
+
+ return status;
+}
+
+static const struct fpga_manager_ops altera_cvp_ops = {
+ .state = altera_cvp_state,
+ .write_init = altera_cvp_write_init,
+ .write = altera_cvp_write,
+ .write_complete = altera_cvp_write_complete,
+};
+
+static int altera_cvp_probe(struct pci_dev *pdev,
+ const struct pci_device_id *dev_id)
+{
+ struct altera_cvp_conf *conf;
+ u16 cmd, val16;
+ int ret;
+
+ pci_read_config_word(pdev, VSEC_PCIE_EXT_CAP_ID, &val16);
+ if (val16 != VSEC_PCIE_EXT_CAP_ID_VAL) {
+ dev_err(&pdev->dev, "Wrong EXT_CAP_ID value 0x%x\n", val16);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ /* Enable memory BAR access */
+ pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+ if (!(cmd & PCI_COMMAND_MEMORY)) {
+ cmd |= PCI_COMMAND_MEMORY;
+ pci_write_config_word(pdev, PCI_COMMAND, cmd);
+ }
+
+ conf = devm_kzalloc(&pdev->dev, sizeof(*conf), GFP_KERNEL);
+ if (!conf) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ conf->pci_dev = pdev;
+
+ if (pci_request_region(pdev, CVP_BAR, "CVP") < 0) {
+ dev_err(&pdev->dev, "Requesting CVP BAR region failed\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ conf->map = pci_iomap(pdev, CVP_BAR, 0);
+ if (!conf->map)
+ dev_warn(&pdev->dev, "Mapping CVP BAR failed\n");
+
+ snprintf(conf->mgr_name, sizeof(conf->mgr_name), "%s @%02x:%02x.%d",
+ ALTERA_CVP_MGR_NAME, pdev->bus->number,
+ PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+
+ ret = fpga_mgr_register(&pdev->dev, conf->mgr_name,
+ &altera_cvp_ops, conf);
+ if (ret)
+ goto err_unmap;
+
+ conf->mgr = fpga_mgr_get(&pdev->dev);
+ if (IS_ERR(conf->mgr)) {
+ dev_err(&pdev->dev, "Getting fpga mgr reference failed\n");
+ ret = -ENODEV;
+ goto err_unreg;
+ }
+ fpga_mgr_put(conf->mgr);
+
+ return 0;
+
+err_unreg:
+ fpga_mgr_unregister(&pdev->dev);
+err_unmap:
+ pci_iounmap(pdev, conf->map);
+ pci_release_region(pdev, CVP_BAR);
+err:
+ cmd &= ~PCI_COMMAND_MEMORY;
+ pci_write_config_word(pdev, PCI_COMMAND, cmd);
+ return ret;
+}
+
+static void altera_cvp_remove(struct pci_dev *pdev)
+{
+ struct fpga_manager *mgr = pci_get_drvdata(pdev);
+ struct altera_cvp_conf *conf = mgr->priv;
+ u16 cmd;
+
+ fpga_mgr_unregister(&pdev->dev);
+ pci_iounmap(pdev, conf->map);
+ pci_release_region(pdev, CVP_BAR);
+ pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+ cmd &= ~PCI_COMMAND_MEMORY;
+ pci_write_config_word(pdev, PCI_COMMAND, cmd);
+}
+
+#define PCI_VENDOR_ID_ALTERA 0x1172
+
+static struct pci_device_id altera_cvp_id_tbl[] = {
+ { PCI_VDEVICE(ALTERA, PCI_ANY_ID) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(pci, altera_cvp_id_tbl);
+
+static struct pci_driver altera_cvp_driver = {
+ .name = DRV_NAME,
+ .id_table = altera_cvp_id_tbl,
+ .probe = altera_cvp_probe,
+ .remove = altera_cvp_remove,
+};
+
+static int __init altera_cvp_init(void)
+{
+ return pci_register_driver(&altera_cvp_driver);
+}
+
+static void __exit altera_cvp_exit(void)
+{
+ pci_unregister_driver(&altera_cvp_driver);
+}
+
+module_init(altera_cvp_init);
+module_exit(altera_cvp_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Anatolij Gustschin <agust@xxxxxxx>");
+MODULE_DESCRIPTION("Module to load Altera FPGA over CvP");
--
2.7.4