Re: [PATCH v6 1/4] net: dsa: add support for the SMSC-LAN9303 tagging format

[Florian Fainelli]

On 04/18/2017 01:48 AM, Juergen Borleis wrote:
> To define the outgoing port and to discover the incoming port a regular
> VLAN tag is used by the LAN9303. But its VID meaning is 'special'.
> 
> This tag handler/filter depends on some hardware features which must be
> enabled in the device to provide and make use of this special VLAN tag
> to control the destination and the source of an ethernet packet.
> 
> Signed-off-by: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
> ---
>  include/net/dsa.h     |   1 +
>  net/dsa/Kconfig       |   4 ++
>  net/dsa/Makefile      |   1 +
>  net/dsa/dsa.c         |   3 ++
>  net/dsa/dsa_priv.h    |   3 ++
>  net/dsa/tag_lan9303.c | 141 ++++++++++++++++++++++++++++++++++++++++++++++++++
>  6 files changed, 153 insertions(+)
>  create mode 100644 net/dsa/tag_lan9303.c
> 
> diff --git a/include/net/dsa.h b/include/net/dsa.h
> index 9b1c1eb4147a1..51aac97a735fd 100644
> --- a/include/net/dsa.h
> +++ b/include/net/dsa.h
> @@ -33,6 +33,7 @@ enum dsa_tag_protocol {
>  	DSA_TAG_PROTO_BRCM,
>  	DSA_TAG_PROTO_QCA,
>  	DSA_TAG_PROTO_MTK,
> +	DSA_TAG_PROTO_LAN9303,
>  	DSA_TAG_LAST,		/* MUST BE LAST */
>  };
>  
> diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
> index aa21f49f12156..81a0868edb1d6 100644
> --- a/net/dsa/Kconfig
> +++ b/net/dsa/Kconfig
> @@ -33,4 +33,8 @@ config NET_DSA_TAG_QCA
>  
>  config NET_DSA_TAG_MTK
>  	bool
> +
> +config NET_DSA_TAG_LAN9303
> +	bool
> +
>  endif
> diff --git a/net/dsa/Makefile b/net/dsa/Makefile
> index 9b1d478f3713f..2cc661eab5528 100644
> --- a/net/dsa/Makefile
> +++ b/net/dsa/Makefile
> @@ -9,3 +9,4 @@ dsa_core-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
>  dsa_core-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
>  dsa_core-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o
>  dsa_core-$(CONFIG_NET_DSA_TAG_MTK) += tag_mtk.o
> +dsa_core-$(CONFIG_NET_DSA_TAG_LAN9303) += tag_lan9303.o
> diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
> index 1fb9cf7aaaf49..c88466ecfa97b 100644
> --- a/net/dsa/dsa.c
> +++ b/net/dsa/dsa.c
> @@ -58,6 +58,9 @@ const struct dsa_device_ops *dsa_device_ops[DSA_TAG_LAST] = {
>  #ifdef CONFIG_NET_DSA_TAG_MTK
>  	[DSA_TAG_PROTO_MTK] = &mtk_netdev_ops,
>  #endif
> +#ifdef CONFIG_NET_DSA_TAG_LAN9303
> +	[DSA_TAG_PROTO_LAN9303] = &lan9303_netdev_ops,
> +#endif
>  	[DSA_TAG_PROTO_NONE] = &none_ops,
>  };
>  
> diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
> index 107138a55bd86..1f8a12859bd2a 100644
> --- a/net/dsa/dsa_priv.h
> +++ b/net/dsa/dsa_priv.h
> @@ -89,4 +89,7 @@ extern const struct dsa_device_ops qca_netdev_ops;
>  /* tag_mtk.c */
>  extern const struct dsa_device_ops mtk_netdev_ops;
>  
> +/* tag_lan9303.c */
> +extern const struct dsa_device_ops lan9303_netdev_ops;
> +
>  #endif
> diff --git a/net/dsa/tag_lan9303.c b/net/dsa/tag_lan9303.c
> new file mode 100644
> index 0000000000000..563b6c8fe445e
> --- /dev/null
> +++ b/net/dsa/tag_lan9303.c
> @@ -0,0 +1,141 @@
> +/*
> + * Copyright (C) 2017 Pengutronix, Juergen Borleis <jbe@xxxxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +#include <linux/etherdevice.h>
> +#include <linux/list.h>
> +#include <linux/slab.h>
> +#include <net/dsa.h>
> +#include "dsa_priv.h"
> +
> +/* To define the outgoing port and to discover the incoming port a regular
> + * VLAN tag is used by the LAN9303. But its VID meaning is 'special':
> + *
> + *       Dest MAC       Src MAC        TAG    Type
> + * ...| 1 2 3 4 5 6 | 1 2 3 4 5 6 | 1 2 3 4 | 1 2 |...
> + *                                |<------->|
> + * TAG:
> + *    |<------------->|
> + *    |  1  2 | 3  4  |
> + *      TPID    VID
> + *     0x8100
> + *
> + * VID bit 3 indicates a request for an ALR lookup.
> + *
> + * If VID bit 3 is zero, then bits 0 and 1 specify the destination port
> + * (0, 1, 2) or broadcast (3) or the source port (1, 2).
> + *
> + * VID bit 4 is used to specify if the STP port state should be overridden.
> + * Required when no forwarding between the external ports should happen.
> + */
> +
> +#define LAN9303_TAG_LEN 4
> +#define LAN9303_MAX_PORTS 3
> +
> +static struct sk_buff *lan9303_xmit(struct sk_buff *skb, struct net_device *dev)
> +{
> +	struct dsa_slave_priv *p = netdev_priv(dev);
> +	u16 *lan9303_tag;
> +
> +	/* insert a special VLAN tag between the MAC addresses
> +	 * and the current ethertype field.
> +	 */
> +	if (skb_cow_head(skb, LAN9303_TAG_LEN) < 0) {
> +		dev_dbg(&dev->dev,
> +			"Cannot make room for the special tag. Dropping packet\n");
> +		goto out_free;
> +	}
> +
> +	/* provide 'LAN9303_TAG_LEN' bytes additional space */
> +	skb_push(skb, LAN9303_TAG_LEN);
> +
> +	/* make room between MACs and Ether-Type */
> +	memmove(skb->data, skb->data + LAN9303_TAG_LEN, 2 * ETH_ALEN);
> +
> +	lan9303_tag = (u16 *)(skb->data + 2 * ETH_ALEN);
> +	lan9303_tag[0] = htons(ETH_P_8021Q);
> +	lan9303_tag[1] = htons(p->dp->index | BIT(4));
> +
> +	return skb;
> +out_free:
> +	kfree_skb(skb);
> +	return NULL;
> +}
> +
> +static struct sk_buff *lan9303_rcv(struct sk_buff *skb, struct net_device *dev,
> +			struct packet_type *pt, struct net_device *orig_dev)
> +{
> +	u16 *lan9303_tag;
> +	struct dsa_switch_tree *dst = dev->dsa_ptr;
> +	struct dsa_switch *ds;
> +	unsigned int source_port;
> +
> +	if (unlikely(!dst)) {
> +		dev_warn_ratelimited(&dev->dev, "Dropping packet, due to missing switch tree device\n");
> +		return NULL;
> +	}

This check is done by dsa_switch_rcv(), no need to duplicate it here.

Other than that:

Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
-- 
Florian