Re: [PATCH 2/5] mtd: nand: gpmi: add i.MX 7 SoC support

[Stefan Agner]

On 2017-04-20 19:03, Marek Vasut wrote:
> On 04/21/2017 03:07 AM, Stefan Agner wrote:
>> Add support for i.MX 7 SoC. The i.MX 7 has a slightly different
>> clock architecture requiring only two clocks to be referenced.
>> The IP is slightly different compared to i.MX 6SoloX, but currently
>> none of this differences are in use so there is no detection needed
>> and the driver can reuse IS_MX6SX.
>>
>> Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
>> ---
>>  drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 15 +++++++++++++++
>>  1 file changed, 15 insertions(+)
>>
>> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
>> index c8bbf5da2ab8..4a45d37ddc80 100644
>> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
>> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
>> @@ -127,6 +127,18 @@ static const struct gpmi_devdata gpmi_devdata_imx6sx = {
>>  	.clks_count = ARRAY_SIZE(gpmi_clks_for_mx6),
>>  };
>>
>> +static const char * const gpmi_clks_for_mx7d[] = {
>> +	"gpmi_io", "gpmi_bch_apb",
>> +};
>> +
>> +static const struct gpmi_devdata gpmi_devdata_imx7d = {
>> +	.type = IS_MX6SX,
> 
> Would it make sense to use IS_MX7 here already to prevent future surprises ?
> 

Yeah I was thinking we can do it once we have an actual reason to
distinguish.

But then, adding the type would only require 2-3 lines of change if I
add it to the GPMI_IS_MX6 macro...

--
Stefan

>> +	.bch_max_ecc_strength = 62,
>> +	.max_chain_delay = 12,
>> +	.clks = gpmi_clks_for_mx7d,
>> +	.clks_count = ARRAY_SIZE(gpmi_clks_for_mx7d),
>> +};
>> +
>>  static irqreturn_t bch_irq(int irq, void *cookie)
>>  {
>>  	struct gpmi_nand_data *this = cookie;
>> @@ -2071,6 +2083,9 @@ static const struct of_device_id gpmi_nand_id_table[] = {
>>  	}, {
>>  		.compatible = "fsl,imx6sx-gpmi-nand",
>>  		.data = &gpmi_devdata_imx6sx,
>> +	}, {
>> +		.compatible = "fsl,imx7d-gpmi-nand",
>> +		.data = &gpmi_devdata_imx7d,
>>  	}, {}
>>  };
>>  MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
>>