[PATCH v2 0/5] Introduce the Atmel PTC subsystem

From: Ludovic Desroches
Date: Fri Apr 21 2017 - 04:40:29 EST


Hi,

The Atmel Peripheral touch controller subsystem offers built-in hardware for
capacitive touch measurement on sensors that function as buttons, sliders and
wheels. It is available on SAMA5D2.

A firmware and a configuration file describing the topology and the parameters
of the sensor are loaded when probing the driver.

Changes:
- v2:
- reorder patches to get the bindings documentation in first
- remove the header from the uapi since it may change in the future. Declare
only the few structures needed in the driver.
- add this driver to the sama5_defconfig

Ludovic Desroches (5):
dt-bindings: input: Add Atmel PTC subsystem bindings
input: misc: introduce Atmel PTC driver
MAINTAINERS: add Atmel PTC entries
ARM: dts: at91: sama5d2: add PTC subsystem device
ARM: at91/defconfig: add PTC driver to sama5_defconfig

.../devicetree/bindings/input/atmel,ptc.txt | 67 ++
MAINTAINERS | 7 +
arch/arm/boot/dts/sama5d2.dtsi | 16 +
arch/arm/configs/sama5_defconfig | 2 +
drivers/input/misc/Kconfig | 12 +
drivers/input/misc/Makefile | 1 +
drivers/input/misc/atmel_ptc.c | 723 +++++++++++++++++++++
7 files changed, 828 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/atmel,ptc.txt
create mode 100644 drivers/input/misc/atmel_ptc.c

--
2.9.0