[PATCH 2/2 v4] dt-bindings: display: imx: entry for AUS mode
From: Martin Kaiser
Date: Fri Apr 21 2017 - 08:31:21 EST
Allow setting AUS mode for a display from the device tree. Use an
optional boolean property. AUS mode can be set only on imx21 and
compatible chipsets.
Signed-off-by: Martin Kaiser <martin@xxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
sending this again, I missed the v4 in the Subject line
v4:
rename the DT property to fsl,aus-mode
v3:
use a boolean DT property instead of the register value
separate patches for DT binding and code changes
v2:
re-sending DT bindings and code changes as one patch
Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
index 7a5c0e2..e5a8b36 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
@@ -13,6 +13,8 @@ Required nodes:
Additional, the display node has to define properties:
- bits-per-pixel: Bits per pixel
- fsl,pcr: LCDC PCR value
+ A display node may optionally define
+ - fsl,aus-mode: boolean to enable AUS mode (only for imx21)
Optional properties:
- lcd-supply: Regulator for LCD supply voltage.
--
2.1.4