Re: watchdog: f71808e_wdt: Add F71868 support

[Guenter Roeck]

On Mon, Apr 17, 2017 at 10:37:05PM +0200, Maciej S. Szmigiero wrote:
> This adds support for watchdog part of Fintek F71868 Super I/O chip to
> f71808e_wdt driver.
> 
> The F71868 chip is, in general, very similar to a F71869, however it has
> slightly different set of available reset pulse widths.
> 
> Tested on MSI A55M-P33 motherboard.
> 
> Signed-off-by: Maciej S. Szmigiero <mail@xxxxxxxxxxxxxxxxxxxxx>

Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>

> ---
>  drivers/watchdog/Kconfig       |  7 ++++---
>  drivers/watchdog/f71808e_wdt.c | 27 ++++++++++++++++++++-------
>  2 files changed, 24 insertions(+), 10 deletions(-)
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 8b9049dac094..1f23079537ad 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -829,11 +829,12 @@ config EBC_C384_WDT
>  	  the timeout module parameter.
>  
>  config F71808E_WDT
> -	tristate "Fintek F71808E, F71862FG, F71869, F71882FG and F71889FG Watchdog"
> +	tristate "Fintek F718xx, F818xx Super I/O Watchdog"
>  	depends on X86
>  	help
> -	  This is the driver for the hardware watchdog on the Fintek
> -	  F71808E, F71862FG, F71869, F71882FG and F71889FG Super I/O controllers.
> +	  This is the driver for the hardware watchdog on the Fintek F71808E,
> +	  F71862FG, F71868, F71869, F71882FG, F71889FG, F81865 and F81866
> +	  Super I/O controllers.
>  
>  	  You can compile this driver directly into the kernel, or use
>  	  it as a module.  The module will be called f71808e_wdt.
> diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c
> index 1b7e9169072f..8658dba21768 100644
> --- a/drivers/watchdog/f71808e_wdt.c
> +++ b/drivers/watchdog/f71808e_wdt.c
> @@ -57,6 +57,7 @@
>  #define SIO_F71808_ID		0x0901	/* Chipset ID */
>  #define SIO_F71858_ID		0x0507	/* Chipset ID */
>  #define SIO_F71862_ID		0x0601	/* Chipset ID */
> +#define SIO_F71868_ID		0x1106	/* Chipset ID */
>  #define SIO_F71869_ID		0x0814	/* Chipset ID */
>  #define SIO_F71869A_ID		0x1007	/* Chipset ID */
>  #define SIO_F71882_ID		0x0541	/* Chipset ID */
> @@ -101,7 +102,7 @@ MODULE_PARM_DESC(timeout,
>  static unsigned int pulse_width = WATCHDOG_PULSE_WIDTH;
>  module_param(pulse_width, uint, 0);
>  MODULE_PARM_DESC(pulse_width,
> -	"Watchdog signal pulse width. 0(=level), 1 ms, 25 ms, 125 ms or 5000 ms"
> +	"Watchdog signal pulse width. 0(=level), 1, 25, 30, 125, 150, 5000 or 6000 ms"
>  			" (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")");
>  
>  static unsigned int f71862fg_pin = WATCHDOG_F71862FG_PIN;
> @@ -119,13 +120,14 @@ module_param(start_withtimeout, uint, 0);
>  MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with"
>  	" given initial timeout. Zero (default) disables this feature.");
>  
> -enum chips { f71808fg, f71858fg, f71862fg, f71869, f71882fg, f71889fg, f81865,
> -	     f81866};
> +enum chips { f71808fg, f71858fg, f71862fg, f71868, f71869, f71882fg, f71889fg,
> +	     f81865, f81866};
>  
>  static const char *f71808e_names[] = {
>  	"f71808fg",
>  	"f71858fg",
>  	"f71862fg",
> +	"f71868",
>  	"f71869",
>  	"f71882fg",
>  	"f71889fg",
> @@ -252,16 +254,23 @@ static int watchdog_set_timeout(int timeout)
>  static int watchdog_set_pulse_width(unsigned int pw)
>  {
>  	int err = 0;
> +	unsigned int t1 = 25, t2 = 125, t3 = 5000;
> +
> +	if (watchdog.type == f71868) {
> +		t1 = 30;
> +		t2 = 150;
> +		t3 = 6000;
> +	}
>  
>  	mutex_lock(&watchdog.lock);
>  
> -	if        (pw <=    1) {
> +	if        (pw <=  1) {
>  		watchdog.pulse_val = 0;
> -	} else if (pw <=   25) {
> +	} else if (pw <= t1) {
>  		watchdog.pulse_val = 1;
> -	} else if (pw <=  125) {
> +	} else if (pw <= t2) {
>  		watchdog.pulse_val = 2;
> -	} else if (pw <= 5000) {
> +	} else if (pw <= t3) {
>  		watchdog.pulse_val = 3;
>  	} else {
>  		pr_err("pulse width out of range\n");
> @@ -354,6 +363,7 @@ static int watchdog_start(void)
>  			goto exit_superio;
>  		break;
>  
> +	case f71868:
>  	case f71869:
>  		/* GPIO14 --> WDTRST# */
>  		superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT1, 4);
> @@ -792,6 +802,9 @@ static int __init f71808e_find(int sioaddr)
>  		watchdog.type = f71862fg;
>  		err = f71862fg_pin_configure(0); /* validate module parameter */
>  		break;
> +	case SIO_F71868_ID:
> +		watchdog.type = f71868;
> +		break;
>  	case SIO_F71869_ID:
>  	case SIO_F71869A_ID:
>  		watchdog.type = f71869;