Re: [PATCH V2] clk: hi6220: Add the hi655x's pmic clock

[Lee Jones]

On Sat, 08 Apr 2017, Daniel Lezcano wrote:

> The hi655x multi function device is a PMIC providing regulators.
> 
> The PMIC also provides a clock for the WiFi and the Bluetooth, let's implement
> this clock in order to add it in the hi655x MFD and allow proper wireless
> initialization.
> 
> Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
> ---
> 
> Changelog:
> 
>  V2:
>     - Added COMPILE_TEST option, compiled on x86
>     - Removed useless parenthesis
>     - Used of_clk_hw_simple_get() instead of deref dance
>     - Do bailout if the clock-names is not specified
>     - Rollback on error
>     - Folded mfd line change and binding
>     - Added #clock-cells binding documentation
>     - Added #clock-cells in the DT
> 
>  V1: initial post
> ---

??

> ---

I'm unsure if this as been mentioned before, but bundling;
driver & architecture changes and documentation into a single patch is
very seldom a good idea.  In this case, you should split this into at
least 3, perhaps 4 patches.

>  .../devicetree/bindings/mfd/hisilicon,hi655x.txt   |   6 +

Patch 1

>  arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts     |   1 +

Patch 2

>  drivers/clk/Kconfig                                |   8 ++
>  drivers/clk/Makefile                               |   1 +
>  drivers/clk/clk-hi655x.c                           | 140 +++++++++++++++++++++

Patch 3

>  drivers/mfd/hi655x-pmic.c                          |   3 +-

Patch 4

[...]

>  6 files changed, 158 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/clk/clk-hi655x.c
> 
> diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
> index 0548569..194e2a9fd 100644
> --- a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
> +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
> @@ -16,6 +16,11 @@ Required properties:
>  - reg:                  Base address of PMIC on Hi6220 SoC.
>  - interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
>  - pmic-gpios:           The GPIO used by PMIC IRQ.
> +- #clock-cells:		From common clock binding; shall be set to 0
> +
> +Optional properties:
> +- clock-output-names: From common clock binding to override the
> +  default output clock name
>  
>  Example:
>  	pmic: pmic@f8000000 {
> @@ -24,4 +29,5 @@ Example:
>  		interrupt-controller;
>  		#interrupt-cells = <2>;
>  		pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
> +		clock-cells = <0>;
>  	}
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> index dba3c13..bb9afb1 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> @@ -328,6 +328,7 @@
>  		interrupt-controller;
>  		#interrupt-cells = <2>;
>  		pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
> +		#clock-cells = <0>;
>  
>  		regulators {
>  			ldo2: LDO2 {
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 9356ab4..36cfea3 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -47,6 +47,14 @@ config COMMON_CLK_RK808
>  	  clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
>  	  by control register.
>  
> +config COMMON_CLK_HI655X
> +	tristate "Clock driver for Hi655x"
> +	depends on MFD_HI655X_PMIC || COMPILE_TEST
> +	---help---
> +	  This driver supports the hi655x PMIC clock. This
> +	  multi-function device has one fixed-rate oscillator, clocked
> +	  at 32KHz.
> +
>  config COMMON_CLK_SCPI
>  	tristate "Clock driver controlled via SCPI interface"
>  	depends on ARM_SCPI_PROTOCOL || COMPILE_TEST
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 92c12b8..c19983a 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -36,6 +36,7 @@ obj-$(CONFIG_COMMON_CLK_PALMAS)		+= clk-palmas.o
>  obj-$(CONFIG_COMMON_CLK_PWM)		+= clk-pwm.o
>  obj-$(CONFIG_CLK_QORIQ)			+= clk-qoriq.o
>  obj-$(CONFIG_COMMON_CLK_RK808)		+= clk-rk808.o
> +obj-$(CONFIG_COMMON_CLK_HI655X)		+= clk-hi655x.o
>  obj-$(CONFIG_COMMON_CLK_S2MPS11)	+= clk-s2mps11.o
>  obj-$(CONFIG_COMMON_CLK_SCPI)           += clk-scpi.o
>  obj-$(CONFIG_COMMON_CLK_SI5351)		+= clk-si5351.o
> diff --git a/drivers/clk/clk-hi655x.c b/drivers/clk/clk-hi655x.c
> new file mode 100644
> index 0000000..b2bea32
> --- /dev/null
> +++ b/drivers/clk/clk-hi655x.c
> @@ -0,0 +1,140 @@
> +/*
> + * Clock driver for Hi655x
> + *
> + * Copyright (c) 2016, Linaro Ltd.
> + *
> + * Author: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + */
> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/hi655x-pmic.h>
> +
> +#define HI655X_CLK_BASE	HI655X_BUS_ADDR(0x1c)
> +#define HI655X_CLK_SET	BIT(6)
> +
> +struct hi655x_clk {
> +	struct hi655x_pmic *hi655x;
> +	struct clk_hw       clk_hw;
> +};
> +
> +static unsigned long hi655x_clk_recalc_rate(struct clk_hw *hw,
> +					    unsigned long parent_rate)
> +{
> +	return 32768;
> +}
> +
> +static int hi655x_clk_enable(struct clk_hw *hw, bool enable)
> +{
> +	struct hi655x_clk *hi655x_clk =
> +		container_of(hw, struct hi655x_clk, clk_hw);
> +
> +	struct hi655x_pmic *hi655x = hi655x_clk->hi655x;
> +
> +	return regmap_update_bits(hi655x->regmap, HI655X_CLK_BASE,
> +				  HI655X_CLK_SET, enable ? HI655X_CLK_SET : 0);
> +}
> +
> +static int hi655x_clk_prepare(struct clk_hw *hw)
> +{
> +	return hi655x_clk_enable(hw, true);
> +}
> +
> +static void hi655x_clk_unprepare(struct clk_hw *hw)
> +{
> +	hi655x_clk_enable(hw, false);
> +}
> +
> +static int hi655x_clk_is_prepared(struct clk_hw *hw)
> +{
> +	struct hi655x_clk *hi655x_clk =
> +		container_of(hw, struct hi655x_clk, clk_hw);
> +	struct hi655x_pmic *hi655x = hi655x_clk->hi655x;
> +	int ret;
> +	uint32_t val;
> +
> +	ret = regmap_read(hi655x->regmap, HI655X_CLK_BASE, &val);
> +	if (ret < 0)
> +		return ret;
> +
> +	return val & HI655X_CLK_BASE;
> +}
> +
> +static const struct clk_ops hi655x_clk_ops = {
> +	.prepare     = hi655x_clk_prepare,
> +	.unprepare   = hi655x_clk_unprepare,
> +	.is_prepared = hi655x_clk_is_prepared,
> +	.recalc_rate = hi655x_clk_recalc_rate,
> +};
> +
> +static int hi655x_clk_probe(struct platform_device *pdev)
> +{
> +	struct device *parent = pdev->dev.parent;
> +	struct hi655x_pmic *hi655x = dev_get_drvdata(parent);
> +	struct clk_init_data *hi655x_clk_init;
> +	struct hi655x_clk *hi655x_clk;
> +	const char *clk_name = "hi655x-clk";
> +	int ret;
> +
> +	hi655x_clk = devm_kzalloc(&pdev->dev, sizeof(*hi655x_clk), GFP_KERNEL);
> +	if (!hi655x_clk)
> +		return -ENOMEM;
> +
> +	hi655x_clk_init = devm_kzalloc(&pdev->dev, sizeof(*hi655x_clk_init),
> +				       GFP_KERNEL);
> +	if (!hi655x_clk_init)
> +		return -ENOMEM;
> +
> +	of_property_read_string_index(parent->of_node, "clock-output-names",
> +				      0, &clk_name);
> +
> +	hi655x_clk_init->name	= clk_name;
> +	hi655x_clk_init->ops	= &hi655x_clk_ops;
> +
> +	hi655x_clk->clk_hw.init	= hi655x_clk_init;
> +	hi655x_clk->hi655x	= hi655x;
> +
> +	platform_set_drvdata(pdev, hi655x_clk);
> +
> +	ret = devm_clk_hw_register(&pdev->dev, &hi655x_clk->clk_hw);
> +	if (ret)
> +		return ret;
> +
> +	ret = of_clk_add_hw_provider(parent->of_node, of_clk_hw_simple_get,
> +				     &hi655x_clk->clk_hw);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_hw_register_clkdev(&hi655x_clk->clk_hw, clk_name, NULL);
> +	if (ret)
> +		of_clk_del_provider(parent->of_node);
> +
> +	return ret;
> +}
> +
> +static struct platform_driver hi655x_clk_driver = {
> +	.probe =  hi655x_clk_probe,
> +	.driver		= {
> +		.name	= "hi655x-clk",
> +	},
> +};
> +
> +module_platform_driver(hi655x_clk_driver);
> +
> +MODULE_DESCRIPTION("Clk driver for the hi655x series PMICs");
> +MODULE_AUTHOR("Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:hi655x-clk");
> diff --git a/drivers/mfd/hi655x-pmic.c b/drivers/mfd/hi655x-pmic.c
> index ba706ad..c37ccbf 100644
> --- a/drivers/mfd/hi655x-pmic.c
> +++ b/drivers/mfd/hi655x-pmic.c
> @@ -77,7 +77,8 @@
>  		.num_resources	= ARRAY_SIZE(pwrkey_resources),
>  		.resources	= &pwrkey_resources[0],
>  	},
> -	{	.name		= "hi655x-regulator", },
> +	{	.name		= "hi655x-regulator",	},
> +	{	.name		= "hi655x-clk",		},
>  };
>  
>  static void hi655x_local_irq_clear(struct regmap *map)

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog