Re: [PATCH 2/2] mfd: omap-usb-tll: Configure ULPIAUTOIDLE

[Lee Jones]

On Sat, 15 Apr 2017, Tony Lindgren wrote:

> The idle mode needs to be only disabled for UTMIAUTOIDLE while
> ULPIAUTOIDLE can be enabled.
> 
> This matches the TLL_CHANNEL_CONF_i register configuration for ehci-tll
> in the Motorola Linux kernel tree for Wrigley 3G LTE modem on droid 4
> and the modem still stays responsive.
> 
> Cc: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
> Cc: Keshava Munegowda <keshava_mgowda@xxxxxx>
> Cc: Marcel Partap <mpartap@xxxxxxx>
> Cc: Michael Scott <michael.scott@xxxxxxxxxx>
> Cc: Roger Quadros <rogerq@xxxxxx>
> Cc: Sebastian Reichel <sre@xxxxxxxxxx>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> ---
>  drivers/mfd/omap-usb-tll.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)

Applied, thanks.

> diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
> --- a/drivers/mfd/omap-usb-tll.c
> +++ b/drivers/mfd/omap-usb-tll.c
> @@ -373,12 +373,13 @@ int omap_tll_init(struct usbhs_omap_platform_data *pdata)
>  			} else if (pdata->port_mode[i] ==
>  					OMAP_EHCI_PORT_MODE_TLL) {
>  				/*
> -				 * Disable AutoIdle, BitStuffing
> -				 * and use SDR Mode
> +				 * Disable UTMI AutoIdle, BitStuffing
> +				 * and use SDR Mode. Enable ULPI AutoIdle.
>  				 */
>  				reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
>  					| OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
>  				reg |= OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF;
> +				reg |= OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE;
>  			} else if (pdata->port_mode[i] ==
>  					OMAP_EHCI_PORT_MODE_HSIC) {
>  				/*

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog