Re: [PATCH v4 13/18] arm64: allwinner: sun50i-a64: add dwmac-sun8i Ethernet driver

[Corentin Labbe]

On Wed, Apr 12, 2017 at 02:41:53PM +0200, Maxime Ripard wrote:
> On Wed, Apr 12, 2017 at 01:13:55PM +0200, Corentin Labbe wrote:
> > The dwmac-sun8i is an Ethernet MAC that supports 10/100/1000 Mbit
> > connections. It is very similar to the device found in the Allwinner
> > H3, but lacks the internal 100 Mbit PHY and its associated control
> > bits.
> > This adds the necessary bits to the Allwinner A64 SoC .dtsi, but keeps
> > it disabled at this level.
> > 
> > Signed-off-by: Corentin Labbe <clabbe.montjoie@xxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 37 +++++++++++++++++++++++++++
> >  1 file changed, 37 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> > index 0b0f4ab..2569827 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> > @@ -287,6 +287,23 @@
> >  				bias-pull-up;
> >  			};
> >  
> > +			rmii_pins: rmii_pins {
> > +				pins = "PD10", "PD11", "PD13", "PD14",
> > +						"PD17", "PD18", "PD19", "PD20",
> > +						"PD22", "PD23";
> 
> Please align the wrapped lines on the first pin.
> 

OK

> > +				function = "emac";
> > +				drive-strength = <40>;
> 
> Do you actually need that for all the boards, or only a few of them?

I have tried to use lower value without success on some boards. (opipc/pine64 in my memory)

Regards
Corentin Labbe