[PATCH] Use device_property_read instead of of_property_read in the dw_mmc driver

From: David Woods
Date: Tue Apr 25 2017 - 11:40:17 EST


Using the device_property interfaces allows the dw_mmc driver to work
on platforms which run on either device tree or ACPI.

Signed-off-by: David Woods <dwoods@xxxxxxxxxxxx>
Reviewed-by: Chris Metcalf <cmetcalf@xxxxxxxxxxxx>
---
drivers/mmc/core/host.c | 72 +++++++++++++++++++++++------------------------
drivers/mmc/host/dw_mmc.c | 24 ++++++++--------
2 files changed, 47 insertions(+), 49 deletions(-)

diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 3f8c85d..d2c059e 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -176,19 +176,17 @@ static void mmc_retune_timer(unsigned long data)
*/
int mmc_of_parse(struct mmc_host *host)
{
- struct device_node *np;
+ struct device *dev = host->parent;
u32 bus_width;
int ret;
bool cd_cap_invert, cd_gpio_invert = false;
bool ro_cap_invert, ro_gpio_invert = false;

- if (!host->parent || !host->parent->of_node)
+ if (!dev)
return 0;

- np = host->parent->of_node;
-
/* "bus-width" is translated to MMC_CAP_*_BIT_DATA flags */
- if (of_property_read_u32(np, "bus-width", &bus_width) < 0) {
+ if (device_property_read_u32(dev, "bus-width", &bus_width) < 0) {
dev_dbg(host->parent,
"\"bus-width\" property is missing, assuming 1 bit.\n");
bus_width = 1;
@@ -210,7 +208,7 @@ int mmc_of_parse(struct mmc_host *host)
}

/* f_max is obtained from the optional "max-frequency" property */
- of_property_read_u32(np, "max-frequency", &host->f_max);
+ device_property_read_u32(dev, "max-frequency", &host->f_max);

/*
* Configure CD and WP pins. They are both by default active low to
@@ -225,12 +223,12 @@ int mmc_of_parse(struct mmc_host *host)
*/

/* Parse Card Detection */
- if (of_property_read_bool(np, "non-removable")) {
+ if (device_property_read_bool(dev, "non-removable")) {
host->caps |= MMC_CAP_NONREMOVABLE;
} else {
- cd_cap_invert = of_property_read_bool(np, "cd-inverted");
+ cd_cap_invert = device_property_read_bool(dev, "cd-inverted");

- if (of_property_read_bool(np, "broken-cd"))
+ if (device_property_read_bool(dev, "broken-cd"))
host->caps |= MMC_CAP_NEEDS_POLL;

ret = mmc_gpiod_request_cd(host, "cd", 0, true,
@@ -256,7 +254,7 @@ int mmc_of_parse(struct mmc_host *host)
}

/* Parse Write Protection */
- ro_cap_invert = of_property_read_bool(np, "wp-inverted");
+ ro_cap_invert = device_property_read_bool(dev, "wp-inverted");

ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &ro_gpio_invert);
if (!ret)
@@ -264,64 +262,64 @@ int mmc_of_parse(struct mmc_host *host)
else if (ret != -ENOENT && ret != -ENOSYS)
return ret;

- if (of_property_read_bool(np, "disable-wp"))
+ if (device_property_read_bool(dev, "disable-wp"))
host->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;

/* See the comment on CD inversion above */
if (ro_cap_invert ^ ro_gpio_invert)
host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;

- if (of_property_read_bool(np, "cap-sd-highspeed"))
+ if (device_property_read_bool(dev, "cap-sd-highspeed"))
host->caps |= MMC_CAP_SD_HIGHSPEED;
- if (of_property_read_bool(np, "cap-mmc-highspeed"))
+ if (device_property_read_bool(dev, "cap-mmc-highspeed"))
host->caps |= MMC_CAP_MMC_HIGHSPEED;
- if (of_property_read_bool(np, "sd-uhs-sdr12"))
+ if (device_property_read_bool(dev, "sd-uhs-sdr12"))
host->caps |= MMC_CAP_UHS_SDR12;
- if (of_property_read_bool(np, "sd-uhs-sdr25"))
+ if (device_property_read_bool(dev, "sd-uhs-sdr25"))
host->caps |= MMC_CAP_UHS_SDR25;
- if (of_property_read_bool(np, "sd-uhs-sdr50"))
+ if (device_property_read_bool(dev, "sd-uhs-sdr50"))
host->caps |= MMC_CAP_UHS_SDR50;
- if (of_property_read_bool(np, "sd-uhs-sdr104"))
+ if (device_property_read_bool(dev, "sd-uhs-sdr104"))
host->caps |= MMC_CAP_UHS_SDR104;
- if (of_property_read_bool(np, "sd-uhs-ddr50"))
+ if (device_property_read_bool(dev, "sd-uhs-ddr50"))
host->caps |= MMC_CAP_UHS_DDR50;
- if (of_property_read_bool(np, "cap-power-off-card"))
+ if (device_property_read_bool(dev, "cap-power-off-card"))
host->caps |= MMC_CAP_POWER_OFF_CARD;
- if (of_property_read_bool(np, "cap-mmc-hw-reset"))
+ if (device_property_read_bool(dev, "cap-mmc-hw-reset"))
host->caps |= MMC_CAP_HW_RESET;
- if (of_property_read_bool(np, "cap-sdio-irq"))
+ if (device_property_read_bool(dev, "cap-sdio-irq"))
host->caps |= MMC_CAP_SDIO_IRQ;
- if (of_property_read_bool(np, "full-pwr-cycle"))
+ if (device_property_read_bool(dev, "full-pwr-cycle"))
host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE;
- if (of_property_read_bool(np, "keep-power-in-suspend"))
+ if (device_property_read_bool(dev, "keep-power-in-suspend"))
host->pm_caps |= MMC_PM_KEEP_POWER;
- if (of_property_read_bool(np, "wakeup-source") ||
- of_property_read_bool(np, "enable-sdio-wakeup")) /* legacy */
+ if (device_property_read_bool(dev, "wakeup-source") ||
+ device_property_read_bool(dev, "enable-sdio-wakeup")) /* legacy */
host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
- if (of_property_read_bool(np, "mmc-ddr-3_3v"))
+ if (device_property_read_bool(dev, "mmc-ddr-3_3v"))
host->caps |= MMC_CAP_3_3V_DDR;
- if (of_property_read_bool(np, "mmc-ddr-1_8v"))
+ if (device_property_read_bool(dev, "mmc-ddr-1_8v"))
host->caps |= MMC_CAP_1_8V_DDR;
- if (of_property_read_bool(np, "mmc-ddr-1_2v"))
+ if (device_property_read_bool(dev, "mmc-ddr-1_2v"))
host->caps |= MMC_CAP_1_2V_DDR;
- if (of_property_read_bool(np, "mmc-hs200-1_8v"))
+ if (device_property_read_bool(dev, "mmc-hs200-1_8v"))
host->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
- if (of_property_read_bool(np, "mmc-hs200-1_2v"))
+ if (device_property_read_bool(dev, "mmc-hs200-1_2v"))
host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
- if (of_property_read_bool(np, "mmc-hs400-1_8v"))
+ if (device_property_read_bool(dev, "mmc-hs400-1_8v"))
host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR;
- if (of_property_read_bool(np, "mmc-hs400-1_2v"))
+ if (device_property_read_bool(dev, "mmc-hs400-1_2v"))
host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR;
- if (of_property_read_bool(np, "mmc-hs400-enhanced-strobe"))
+ if (device_property_read_bool(dev, "mmc-hs400-enhanced-strobe"))
host->caps2 |= MMC_CAP2_HS400_ES;
- if (of_property_read_bool(np, "no-sdio"))
+ if (device_property_read_bool(dev, "no-sdio"))
host->caps2 |= MMC_CAP2_NO_SDIO;
- if (of_property_read_bool(np, "no-sd"))
+ if (device_property_read_bool(dev, "no-sd"))
host->caps2 |= MMC_CAP2_NO_SD;
- if (of_property_read_bool(np, "no-mmc"))
+ if (device_property_read_bool(dev, "no-mmc"))
host->caps2 |= MMC_CAP2_NO_MMC;

- host->dsr_req = !of_property_read_u32(np, "dsr", &host->dsr);
+ host->dsr_req = !device_property_read_u32(dev, "dsr", &host->dsr);
if (host->dsr_req && (host->dsr & ~0xffff)) {
dev_err(host->parent,
"device tree specified broken value for DSR: 0x%x, ignoring\n",
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 8718432..3728c59 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2641,8 +2641,8 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
host->slot[id] = slot;

mmc->ops = &dw_mci_ops;
- if (of_property_read_u32_array(host->dev->of_node,
- "clock-freq-min-max", freq, 2)) {
+ if (device_property_read_u32_array(host->dev, "clock-freq-min-max",
+ freq, 2)) {
mmc->f_min = DW_MCI_FREQ_MIN;
mmc->f_max = DW_MCI_FREQ_MAX;
} else {
@@ -2742,7 +2742,6 @@ static void dw_mci_init_dma(struct dw_mci *host)
{
int addr_config;
struct device *dev = host->dev;
- struct device_node *np = dev->of_node;

/*
* Check tansfer mode from HCON[17:16]
@@ -2803,8 +2802,9 @@ static void dw_mci_init_dma(struct dw_mci *host)
dev_info(host->dev, "Using internal DMA controller.\n");
} else {
/* TRANS_MODE_EDMAC: check dma bindings again */
- if ((of_property_count_strings(np, "dma-names") < 0) ||
- (!of_find_property(np, "dmas", NULL))) {
+ if ((device_property_read_string_array(dev, "dma-names",
+ NULL, 0) < 0) ||
+ !device_property_present(dev, "dmas")) {
goto no_dma;
}
host->dma_ops = &dw_mci_edmac_ops;
@@ -2964,7 +2964,6 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
{
struct dw_mci_board *pdata;
struct device *dev = host->dev;
- struct device_node *np = dev->of_node;
const struct dw_mci_drv_data *drv_data = host->drv_data;
int ret;
u32 clock_frequency;
@@ -2981,20 +2980,21 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
}

/* find out number of slots supported */
- of_property_read_u32(np, "num-slots", &pdata->num_slots);
+ device_property_read_u32(dev, "num-slots", &pdata->num_slots);

- if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth))
+ if (device_property_read_u32(dev, "fifo-depth", &pdata->fifo_depth))
dev_info(dev,
"fifo-depth property not found, using value of FIFOTH register as default\n");

- of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
+ device_property_read_u32(dev, "card-detect-delay",
+ &pdata->detect_delay_ms);

- of_property_read_u32(np, "data-addr", &host->data_addr_override);
+ device_property_read_u32(dev, "data-addr", &host->data_addr_override);

- if (of_get_property(np, "fifo-watermark-aligned", NULL))
+ if (device_property_present(dev, "fifo-watermark-aligned"))
host->wm_aligned = true;

- if (!of_property_read_u32(np, "clock-frequency", &clock_frequency))
+ if (!device_property_read_u32(dev, "clock-frequency", &clock_frequency))
pdata->bus_hz = clock_frequency;

if (drv_data && drv_data->parse_dt) {
--
2.7.2