Re: [PATCH 2/2] sched/fair: Always propagate runnable_load_avg

[Vincent Guittot]

On 25 April 2017 at 23:08, Tejun Heo <tj@xxxxxxxxxx> wrote:
> On Tue, Apr 25, 2017 at 11:49:41AM -0700, Tejun Heo wrote:
>> > I have run a quick test with your patches and schbench on my platform.
>> > I haven't been able to reproduce your regression but my platform is
>> > quite different from yours (only 8 cores without SMT)
>> > But most importantly, the parent cfs_rq->runnable_load_avg never
>> > reaches 0 (or almost 0) when it is idle. Instead, it still has a
>> > runnable_load_avg (this is not due to rounding computation) whereas
>> > runnable_load_avg should be 0
>>
>> Heh, let me try that out.  Probably a silly mistake somewhere.
>
> This is from the follow-up patch.  I was confused.  Because we don't
> propagate decays, we still should decay the runnable_load_avg;
> otherwise, we end up accumulating errors in the counter.  I'll drop
> the last patch.

Ok, the runnable_load_avg goes back to 0 when I drop patch 3. But i
see  runnable_load_avg sometimes significantly higher than load_avg
which is normally not possible as load_avg = runnable_load_avg +
sleeping task's load_avg

Then, I just have the opposite behavior on my platform. I see a
increase of latency at p99 with your patches.
My platform is a hikey : 2x4 cores ARM and I have used schbench -m 2
-t 4 -s 10000 -c 15000 -r 30 so I have 1 worker thread per CPU which
is similar to what you are doing on your platform

With v4.11-rc8. I have run 10 times the test and get consistent results
schbench -m 2 -t 4 -s 10000 -c 15000 -r 30
Latency percentiles (usec)
50.0000th: 255
75.0000th: 350
90.0000th: 454
95.0000th: 489
*99.0000th: 539
99.5000th: 585
99.9000th: 10224
min=0, max=13567

With your patches i see an increase of the latency for p99. I run 10
times the test too and half tests show latency increase like below
schbench$ ./schbench -m 2 -t 4 -s 10000 -c 15000 -r 30
Latency percentiles (usec)
50.0000th: 216
75.0000th: 295
90.0000th: 395
95.0000th: 444
*99.0000th: 2034
99.5000th: 5960
99.9000th: 12240
min=0, max=14744

>
> Thanks.
>
> --
> tejun