Re: [PATCH v3] staging: ks7010: fix block comment style

[Tobin C. Harding]

On Wed, Apr 26, 2017 at 01:00:23PM +0200, Ilia Sergachev wrote:
> Checkpatch was showing:
> WARNING: Block comments use a trailing */ on a separate line.
> 
> Move trailing */ to a separate line.
> 
> Signed-off-by: Ilia Sergachev <ilia.sergachev@xxxxxxxxx>

Reviewed-by: Tobin C. Harding <me@xxxxxxxx>

> ---
> Changes for v3:
>   - improve the commit message even more
> 
> Changes for v2:
>   - improve the commit message
> 
>  drivers/staging/ks7010/ks_wlan_net.c | 43 ++++++++++++++++++++++--------------
>  1 file changed, 27 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/staging/ks7010/ks_wlan_net.c b/drivers/staging/ks7010/ks_wlan_net.c
> index 121e1530fdba..7f6bd4d53d84 100644
> --- a/drivers/staging/ks7010/ks_wlan_net.c
> +++ b/drivers/staging/ks7010/ks_wlan_net.c
> @@ -230,7 +230,8 @@ static int ks_wlan_set_freq(struct net_device *dev,
>  	else {
>  		int channel = fwrq->m;
>  		/* We should do a better check than that,
> -		 * based on the card capability !!! */
> +		 * based on the card capability !!!
> +		 */
>  		if ((channel < 1) || (channel > 14)) {
>  			netdev_dbg(dev,
>  				   "%s: New channel value of %d is invalid!\n",
> @@ -343,7 +344,8 @@ static int ks_wlan_get_essid(struct net_device *dev,
>  
>  	/* for SLEEP MODE */
>  	/* Note : if dwrq->flags != 0, we should
> -	 * get the relevant SSID from the SSID list... */
> +	 * get the relevant SSID from the SSID list...
> +	 */
>  	if (priv->reg.ssid.size) {
>  		/* Get the current SSID */
>  		memcpy(extra, priv->reg.ssid.body, priv->reg.ssid.size);
> @@ -1137,7 +1139,8 @@ static int ks_wlan_get_range(struct net_device *dev,
>  	range->max_nwid = 0x0000;
>  	range->num_channels = 14;
>  	/* Should be based on cap_rid.country to give only
> -	 * what the current card support */
> +	 * what the current card support
> +	 */
>  	k = 0;
>  	for (i = 0; i < 13; i++) {	/* channel 1 -- 13 */
>  		range->freq[k].i = i + 1;	/* List index */
> @@ -1189,7 +1192,8 @@ static int ks_wlan_get_range(struct net_device *dev,
>  
>  	/* Set an indication of the max TCP throughput
>  	 * in bit/s that we can expect using this interface.
> -	 * May be use for QoS stuff... Jean II */
> +	 * May be use for QoS stuff... Jean II
> +	 */
>  	if (i > 2)
>  		range->throughput = 5000 * 1000;
>  	else
> @@ -1225,7 +1229,8 @@ static int ks_wlan_get_range(struct net_device *dev,
>  
>  	/* Experimental measurements - boundary 11/5.5 Mb/s */
>  	/* Note : with or without the (local->rssi), results
> -	 * are somewhat different. - Jean II */
> +	 * are somewhat different. - Jean II
> +	 */
>  	range->avg_qual.qual = 50;
>  	range->avg_qual.level = 186;	/* -70 dBm */
>  	range->avg_qual.noise = 0;
> @@ -1497,7 +1502,8 @@ static inline char *ks_wlan_translate_scan(struct net_device *dev,
>  				 &(ap->ssid.body[0]));
>  
>  	/* Rate : stuffing multiple values in a single event require a bit
> -	 * more of magic - Jean II */
> +	 * more of magic - Jean II
> +	 */
>  	current_val = current_ev + IW_EV_LCP_LEN;
>  
>  	iwe.cmd = SIOCGIWRATE;
> @@ -1569,7 +1575,8 @@ static inline char *ks_wlan_translate_scan(struct net_device *dev,
>  	}
>  
>  	/* The other data in the scan result are not really
> -	 * interesting, so for now drop it - Jean II */
> +	 * interesting, so for now drop it - Jean II
> +	 */
>  	return current_ev;
>  }
>  
> @@ -1596,7 +1603,8 @@ static int ks_wlan_get_scan(struct net_device *dev,
>  
>  	if (priv->aplist.size == 0) {
>  		/* Client error, no scan results...
> -		 * The caller need to restart the scan. */
> +		 * The caller need to restart the scan.
> +		 */
>  		DPRINTK(2, "aplist 0\n");
>  		return -ENODATA;
>  	}
> @@ -1970,12 +1978,13 @@ static int ks_wlan_get_encode_ext(struct net_device *dev,
>  		return -EPERM;
>  
>  	/* for SLEEP MODE */
> -	/*  WPA (not used ?? wpa_supplicant)
> -	   struct ks_wlan_private *priv = (struct ks_wlan_private *)dev->priv;
> -	   struct iw_encode_ext *enc;
> -	   enc = (struct iw_encode_ext *)extra;
> -	   int index = dwrq->flags & IW_ENCODE_INDEX;
> -	   WPA (not used ?? wpa_supplicant) */
> +	/* WPA (not used ?? wpa_supplicant)
> +	 * struct ks_wlan_private *priv = (struct ks_wlan_private *)dev->priv;
> +	 * struct iw_encode_ext *enc;
> +	 * enc = (struct iw_encode_ext *)extra;
> +	 * int index = dwrq->flags & IW_ENCODE_INDEX;
> +	 * WPA (not used ?? wpa_supplicant)
> +	 */
>  	return 0;
>  }
>  
> @@ -2105,7 +2114,8 @@ static struct iw_statistics *ks_get_wireless_stats(struct net_device *dev)
>  	}
>  
>  	/* Packets discarded in the wireless adapter due to wireless
> -	 * specific problems */
> +	 * specific problems
> +	 */
>  	wstats->discard.nwid = 0;	/* Rx invalid nwid      */
>  	wstats->discard.code = 0;	/* Rx invalid crypt     */
>  	wstats->discard.fragment = 0;	/* Rx invalid frag      */
> @@ -3351,7 +3361,8 @@ void send_packet_complete(void *arg1, void *arg2)
>  }
>  
>  /* Set or clear the multicast filter for this adaptor.
> -   This routine is not state sensitive and need not be SMP locked. */
> + * This routine is not state sensitive and need not be SMP locked. 
> + */
>  static
>  void ks_wlan_set_multicast_list(struct net_device *dev)
>  {
> -- 
> 2.11.0
> 
> _______________________________________________
> devel mailing list
> devel@xxxxxxxxxxxxxxxxxxxxxx
> http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel