[PATCH v2] x86/efi: Correct ident mapping of efi old_map when kalsr enabled
From: Baoquan He
Date: Thu Apr 27 2017 - 08:07:31 EST
For EFI with old_map enabled, Kernel will panic when kaslr is enabled.
The root cause is the ident mapping is not built correctly in this case.
For nokaslr kernel, PAGE_OFFSET is 0xffff880000000000 which is PGDIR_SIZE
aligned. We can borrow the pud table from direct mapping safely. Given a
physical address X, we have pud_index(X) == pud_index(__va(X)). However,
for kaslr kernel, PAGE_OFFSET is PUD_SIZE aligned. For a given physical
address X, pud_index(X) != pud_index(__va(X)). We can't only copy pgd entry
from direct mapping to build ident mapping, instead need copy pud entry
one by one from direct mapping.
So fix it in this patch.
The panic message is like below, an emty PUD or a wrong PUD.
[ 0.233007] BUG: unable to handle kernel paging request at 000000007febd57e
[ 0.233899] IP: 0x7febd57e
[ 0.234000] PGD 1025a067
[ 0.234000] PUD 0
[ 0.234000]
[ 0.234000] Oops: 0010 [#1] SMP
[ 0.234000] Modules linked in:
[ 0.234000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc8+ #125
[ 0.234000] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
[ 0.234000] task: ffffffffafe104c0 task.stack: ffffffffafe00000
[ 0.234000] RIP: 0010:0x7febd57e
[ 0.234000] RSP: 0000:ffffffffafe03d98 EFLAGS: 00010086
[ 0.234000] RAX: ffff8c9e3fff9540 RBX: 000000007c4b6000 RCX: 0000000000000480
[ 0.234000] RDX: 0000000000000030 RSI: 0000000000000480 RDI: 000000007febd57e
[ 0.234000] RBP: ffffffffafe03e40 R08: 0000000000000001 R09: 000000007c4b6000
[ 0.234000] R10: ffffffffafa71a40 R11: 20786c6c2478303d R12: 0000000000000030
[ 0.234000] R13: 0000000000000246 R14: ffff8c9e3c4198d8 R15: 0000000000000480
[ 0.234000] FS: 0000000000000000(0000) GS:ffff8c9e3fa00000(0000) knlGS:0000000000000000
[ 0.234000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 0.234000] CR2: 000000007febd57e CR3: 000000000fe09000 CR4: 00000000000406b0
[ 0.234000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 0.234000] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 0.234000] Call Trace:
[ 0.234000] ? efi_call+0x58/0x90
[ 0.234000] ? printk+0x58/0x6f
[ 0.234000] efi_enter_virtual_mode+0x3c5/0x50d
[ 0.234000] start_kernel+0x40f/0x4b8
[ 0.234000] ? set_init_arg+0x55/0x55
[ 0.234000] ? early_idt_handler_array+0x120/0x120
[ 0.234000] x86_64_start_reservations+0x24/0x26
[ 0.234000] x86_64_start_kernel+0x14c/0x16f
[ 0.234000] start_cpu+0x14/0x14
[ 0.234000] Code: Bad RIP value.
[ 0.234000] RIP: 0x7febd57e RSP: ffffffffafe03d98
[ 0.234000] CR2: 000000007febd57e
[ 0.234000] ---[ end trace d4ded46ab8ab8ba9 ]---
[ 0.234000] Kernel panic - not syncing: Attempted to kill the idle task!
[ 0.234000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
Signed-off-by: Baoquan He <bhe@xxxxxxxxxx>
Signed-off-by: Dave Young <dyoung@xxxxxxxxxx>
Cc: Matt Fleming <matt@xxxxxxxxxxxxxxxxxxx>
Cc: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxxxxx>
Cc: "H. Peter Anvin" <hpa@xxxxxxxxx>
Cc: Thomas Garnier <thgarnie@xxxxxxxxxx>
Cc: Kees Cook <keescook@xxxxxxxxxxxx>
Cc: x86@xxxxxxxxxx
Cc: linux-efi@xxxxxxxxxxxxxxx
---
v1->v2:
Change code and add description according to Thomas's suggestion as below:
1. Add checking if pud table is allocated successfully. If not just break
the for loop.
2. Add code comment to explain how the 1:1 mapping is built in efi_call_phys_prolog
3. Other minor change
arch/x86/platform/efi/efi_64.c | 72 +++++++++++++++++++++++++++++++++++++-----
1 file changed, 64 insertions(+), 8 deletions(-)
diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
index 2ee7694..48de7fd 100644
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -71,11 +71,13 @@ static void __init early_code_mapping_set_exec(int executable)
pgd_t * __init efi_call_phys_prolog(void)
{
- unsigned long vaddress;
+ unsigned long vaddr, left_vaddr;
+ unsigned int num_entries;
pgd_t *save_pgd;
-
- int pgd;
+ pud_t *pud, *pud_k;
+ int pud_idx;
int n_pgds;
+ int i;
if (!efi_enabled(EFI_OLD_MEMMAP)) {
save_pgd = (pgd_t *)read_cr3();
@@ -88,10 +90,51 @@ pgd_t * __init efi_call_phys_prolog(void)
n_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT), PGDIR_SIZE);
save_pgd = kmalloc_array(n_pgds, sizeof(*save_pgd), GFP_KERNEL);
- for (pgd = 0; pgd < n_pgds; pgd++) {
- save_pgd[pgd] = *pgd_offset_k(pgd * PGDIR_SIZE);
- vaddress = (unsigned long)__va(pgd * PGDIR_SIZE);
- set_pgd(pgd_offset_k(pgd * PGDIR_SIZE), *pgd_offset_k(vaddress));
+ /*
+ * We try to build 1:1 ident mapping for efi old_map usage. However,
+ * whether kaslr is enabled or not, PAGE_OFFSET must be PUD_SIZE
+ * aligned. Given a physical address X, we can copy its pud entry
+ * of __va(X) to fill in its pud entry of 1:1 mapping since both
+ * of them relate to the same physical memory position.
+ *
+ * And copying those pud entries one by one is inefficient. We copy
+ * memory. Assume PAGE_OFFSET is not PGDIR_SIZE aligned, say it's
+ * 0xffff880080000000, and we have memory bigger than 512G. Then the
+ * first 512G will cross two pgd entries. We need copy memory twice.
+ * The 1st pud entry will be in the 3rd slot of pud table, so we copy
+ * pud[2] to pud[511] of the 1st pud table pointed by the 1st pgd entry
+ * firstly, then copy pud[0] to pud[1] of the 2nd pud table pointed by
+ * 2nd pgd entry at the second time.
+ */
+ for (i = 0; i < n_pgds; i++) {
+ save_pgd[i] = *pgd_offset_k(i * PGDIR_SIZE);
+
+ vaddr = (unsigned long)__va(i * PGDIR_SIZE);
+
+ /*
+ * Though it may fail to allocate page in the middle, just
+ * leave those allocated pages there since 1:1 mapping has
+ * been built. And efi region could be located there, efi_call
+ * still can work.
+ */
+ pud = pud_alloc_one(NULL, 0);
+ if (!pud) {
+ pr_err("Failed to allocate page for %d-th pud table "
+ "to build 1:1 mapping!\n", i);
+ break;
+ }
+
+ pud_idx = pud_index(vaddr);
+ num_entries = PTRS_PER_PUD - pud_idx;
+ pud_k = pud_offset(pgd_offset_k(vaddr), vaddr);
+ memcpy(pud, pud_k, num_entries);
+ if (pud_idx > 0) {
+ left_vaddr = vaddr + (num_entries * PUD_SIZE);
+ pud_k = pud_offset(pgd_offset_k(left_vaddr),
+ left_vaddr);
+ memcpy(pud + num_entries, pud_k, pud_idx);
+ }
+ pgd_populate(NULL, pgd_offset_k(i * PGDIR_SIZE), pud);
}
out:
__flush_tlb_all();
@@ -106,6 +149,8 @@ void __init efi_call_phys_epilog(pgd_t *save_pgd)
*/
int pgd_idx;
int nr_pgds;
+ pud_t *pud;
+ pgd_t *pgd;
if (!efi_enabled(EFI_OLD_MEMMAP)) {
write_cr3((unsigned long)save_pgd);
@@ -115,8 +160,19 @@ void __init efi_call_phys_epilog(pgd_t *save_pgd)
nr_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT) , PGDIR_SIZE);
- for (pgd_idx = 0; pgd_idx < nr_pgds; pgd_idx++)
+ for (pgd_idx = 0; pgd_idx < nr_pgds; pgd_idx++) {
+ pgd = pgd_offset_k(pgd_idx * PGDIR_SIZE);
+
+ /*
+ * We need check if the pud table was really allocated
+ * successfully. Otherwise no need to free.
+ * */
+ if (pgd_val(*pgd) != pgd_val(save_pgd[pgd_idx])) {
+ pud = (pud_t *)pgd_page_vaddr(*pgd);
+ pud_free(NULL, pud);
+ }
set_pgd(pgd_offset_k(pgd_idx * PGDIR_SIZE), save_pgd[pgd_idx]);
+ }
kfree(save_pgd);
--
2.5.5