Re: [PATCH v2] x86/efi: Correct ident mapping of efi old_map when kalsr enabled
From: Thomas Garnier
Date: Mon May 01 2017 - 10:21:26 EST
On Thu, Apr 27, 2017 at 5:07 AM, Baoquan He <bhe@xxxxxxxxxx> wrote:
> For EFI with old_map enabled, Kernel will panic when kaslr is enabled.
>
> The root cause is the ident mapping is not built correctly in this case.
>
> For nokaslr kernel, PAGE_OFFSET is 0xffff880000000000 which is PGDIR_SIZE
> aligned. We can borrow the pud table from direct mapping safely. Given a
> physical address X, we have pud_index(X) == pud_index(__va(X)). However,
> for kaslr kernel, PAGE_OFFSET is PUD_SIZE aligned. For a given physical
> address X, pud_index(X) != pud_index(__va(X)). We can't only copy pgd entry
> from direct mapping to build ident mapping, instead need copy pud entry
> one by one from direct mapping.
>
> So fix it in this patch.
>
> The panic message is like below, an emty PUD or a wrong PUD.
>
> [ 0.233007] BUG: unable to handle kernel paging request at 000000007febd57e
> [ 0.233899] IP: 0x7febd57e
> [ 0.234000] PGD 1025a067
> [ 0.234000] PUD 0
> [ 0.234000]
> [ 0.234000] Oops: 0010 [#1] SMP
> [ 0.234000] Modules linked in:
> [ 0.234000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc8+ #125
> [ 0.234000] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
> [ 0.234000] task: ffffffffafe104c0 task.stack: ffffffffafe00000
> [ 0.234000] RIP: 0010:0x7febd57e
> [ 0.234000] RSP: 0000:ffffffffafe03d98 EFLAGS: 00010086
> [ 0.234000] RAX: ffff8c9e3fff9540 RBX: 000000007c4b6000 RCX: 0000000000000480
> [ 0.234000] RDX: 0000000000000030 RSI: 0000000000000480 RDI: 000000007febd57e
> [ 0.234000] RBP: ffffffffafe03e40 R08: 0000000000000001 R09: 000000007c4b6000
> [ 0.234000] R10: ffffffffafa71a40 R11: 20786c6c2478303d R12: 0000000000000030
> [ 0.234000] R13: 0000000000000246 R14: ffff8c9e3c4198d8 R15: 0000000000000480
> [ 0.234000] FS: 0000000000000000(0000) GS:ffff8c9e3fa00000(0000) knlGS:0000000000000000
> [ 0.234000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 0.234000] CR2: 000000007febd57e CR3: 000000000fe09000 CR4: 00000000000406b0
> [ 0.234000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 0.234000] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [ 0.234000] Call Trace:
> [ 0.234000] ? efi_call+0x58/0x90
> [ 0.234000] ? printk+0x58/0x6f
> [ 0.234000] efi_enter_virtual_mode+0x3c5/0x50d
> [ 0.234000] start_kernel+0x40f/0x4b8
> [ 0.234000] ? set_init_arg+0x55/0x55
> [ 0.234000] ? early_idt_handler_array+0x120/0x120
> [ 0.234000] x86_64_start_reservations+0x24/0x26
> [ 0.234000] x86_64_start_kernel+0x14c/0x16f
> [ 0.234000] start_cpu+0x14/0x14
> [ 0.234000] Code: Bad RIP value.
> [ 0.234000] RIP: 0x7febd57e RSP: ffffffffafe03d98
> [ 0.234000] CR2: 000000007febd57e
> [ 0.234000] ---[ end trace d4ded46ab8ab8ba9 ]---
> [ 0.234000] Kernel panic - not syncing: Attempted to kill the idle task!
> [ 0.234000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
>
> Signed-off-by: Baoquan He <bhe@xxxxxxxxxx>
> Signed-off-by: Dave Young <dyoung@xxxxxxxxxx>
> Cc: Matt Fleming <matt@xxxxxxxxxxxxxxxxxxx>
> Cc: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> Cc: Ingo Molnar <mingo@xxxxxxxxxx>
> Cc: "H. Peter Anvin" <hpa@xxxxxxxxx>
> Cc: Thomas Garnier <thgarnie@xxxxxxxxxx>
> Cc: Kees Cook <keescook@xxxxxxxxxxxx>
> Cc: x86@xxxxxxxxxx
> Cc: linux-efi@xxxxxxxxxxxxxxx
> ---
> v1->v2:
> Change code and add description according to Thomas's suggestion as below:
>
> 1. Add checking if pud table is allocated successfully. If not just break
> the for loop.
>
> 2. Add code comment to explain how the 1:1 mapping is built in efi_call_phys_prolog
>
> 3. Other minor change
>
Thanks for the changes.
Acked-by: Thomas Garnier <thgarnie@xxxxxxxxxx>
> arch/x86/platform/efi/efi_64.c | 72 +++++++++++++++++++++++++++++++++++++-----
> 1 file changed, 64 insertions(+), 8 deletions(-)
>
> diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
> index 2ee7694..48de7fd 100644
> --- a/arch/x86/platform/efi/efi_64.c
> +++ b/arch/x86/platform/efi/efi_64.c
> @@ -71,11 +71,13 @@ static void __init early_code_mapping_set_exec(int executable)
>
> pgd_t * __init efi_call_phys_prolog(void)
> {
> - unsigned long vaddress;
> + unsigned long vaddr, left_vaddr;
> + unsigned int num_entries;
> pgd_t *save_pgd;
> -
> - int pgd;
> + pud_t *pud, *pud_k;
> + int pud_idx;
> int n_pgds;
> + int i;
>
> if (!efi_enabled(EFI_OLD_MEMMAP)) {
> save_pgd = (pgd_t *)read_cr3();
> @@ -88,10 +90,51 @@ pgd_t * __init efi_call_phys_prolog(void)
> n_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT), PGDIR_SIZE);
> save_pgd = kmalloc_array(n_pgds, sizeof(*save_pgd), GFP_KERNEL);
>
> - for (pgd = 0; pgd < n_pgds; pgd++) {
> - save_pgd[pgd] = *pgd_offset_k(pgd * PGDIR_SIZE);
> - vaddress = (unsigned long)__va(pgd * PGDIR_SIZE);
> - set_pgd(pgd_offset_k(pgd * PGDIR_SIZE), *pgd_offset_k(vaddress));
> + /*
> + * We try to build 1:1 ident mapping for efi old_map usage. However,
> + * whether kaslr is enabled or not, PAGE_OFFSET must be PUD_SIZE
> + * aligned. Given a physical address X, we can copy its pud entry
> + * of __va(X) to fill in its pud entry of 1:1 mapping since both
> + * of them relate to the same physical memory position.
> + *
> + * And copying those pud entries one by one is inefficient. We copy
> + * memory. Assume PAGE_OFFSET is not PGDIR_SIZE aligned, say it's
> + * 0xffff880080000000, and we have memory bigger than 512G. Then the
> + * first 512G will cross two pgd entries. We need copy memory twice.
> + * The 1st pud entry will be in the 3rd slot of pud table, so we copy
> + * pud[2] to pud[511] of the 1st pud table pointed by the 1st pgd entry
> + * firstly, then copy pud[0] to pud[1] of the 2nd pud table pointed by
> + * 2nd pgd entry at the second time.
> + */
> + for (i = 0; i < n_pgds; i++) {
> + save_pgd[i] = *pgd_offset_k(i * PGDIR_SIZE);
> +
> + vaddr = (unsigned long)__va(i * PGDIR_SIZE);
> +
> + /*
> + * Though it may fail to allocate page in the middle, just
> + * leave those allocated pages there since 1:1 mapping has
> + * been built. And efi region could be located there, efi_call
> + * still can work.
> + */
> + pud = pud_alloc_one(NULL, 0);
> + if (!pud) {
> + pr_err("Failed to allocate page for %d-th pud table "
> + "to build 1:1 mapping!\n", i);
> + break;
> + }
> +
> + pud_idx = pud_index(vaddr);
> + num_entries = PTRS_PER_PUD - pud_idx;
> + pud_k = pud_offset(pgd_offset_k(vaddr), vaddr);
> + memcpy(pud, pud_k, num_entries);
> + if (pud_idx > 0) {
> + left_vaddr = vaddr + (num_entries * PUD_SIZE);
> + pud_k = pud_offset(pgd_offset_k(left_vaddr),
> + left_vaddr);
> + memcpy(pud + num_entries, pud_k, pud_idx);
> + }
> + pgd_populate(NULL, pgd_offset_k(i * PGDIR_SIZE), pud);
> }
> out:
> __flush_tlb_all();
> @@ -106,6 +149,8 @@ void __init efi_call_phys_epilog(pgd_t *save_pgd)
> */
> int pgd_idx;
> int nr_pgds;
> + pud_t *pud;
> + pgd_t *pgd;
>
> if (!efi_enabled(EFI_OLD_MEMMAP)) {
> write_cr3((unsigned long)save_pgd);
> @@ -115,8 +160,19 @@ void __init efi_call_phys_epilog(pgd_t *save_pgd)
>
> nr_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT) , PGDIR_SIZE);
>
> - for (pgd_idx = 0; pgd_idx < nr_pgds; pgd_idx++)
> + for (pgd_idx = 0; pgd_idx < nr_pgds; pgd_idx++) {
> + pgd = pgd_offset_k(pgd_idx * PGDIR_SIZE);
> +
> + /*
> + * We need check if the pud table was really allocated
> + * successfully. Otherwise no need to free.
> + * */
> + if (pgd_val(*pgd) != pgd_val(save_pgd[pgd_idx])) {
> + pud = (pud_t *)pgd_page_vaddr(*pgd);
> + pud_free(NULL, pud);
> + }
> set_pgd(pgd_offset_k(pgd_idx * PGDIR_SIZE), save_pgd[pgd_idx]);
> + }
>
> kfree(save_pgd);
>
> --
> 2.5.5
>
--
Thomas