[GIT PULL] Power management updates for v4.12-rc1, part 1
From: Rafael J. Wysocki
Date: Mon May 01 2017 - 16:49:28 EST
Hi Linus,
Please pull from the tag
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git \
pm-4.12-rc1
with top-most commit a1d2fcfd80bef6cdc5675dcabe25587010720bdb
Merge branch 'pm-tools'
on top of commit 5a7ad1146caa895ad718a534399e38bd2ba721b7
Linux 4.11-rc8
to receive the first batch of power management updates for v4.12-rc1.
This time the majority of changes go to the cpufreq subsystem (and
to the intel_pstate driver in particular) and there are some updates
in the generic power domains framework, cpuidle, tools and a couple
of other places.
One thing worth mentioning is that the intel_pstate's sysfs interface
has been reworked to be more consistent with the general expectations
of the cpufreq core and less confusing, hopefully for the better.
Also, we have a new cpufreq driver for Tegra186 and new hardware
support in intel_pstata and the Mediatek cpufreq driver.
Apart from that, the AnalyzeSuspend utility for system suspend
profiling gets a companion called AnalyzeBoot for the analogous
profiling of system boot and they both go into one place under
tools/power/pm-graph/.
The rest is mostly fixes, cleanups and code reorganization.
Specifics:
- Rework the intel_pstate driver's sysfs interface to make it
more straightforward and more intuitive (Rafael Wysocki).
- Make intel_pstate support all processors which advertise HWP
(hardware-managed P-states) to the kernel in all operation modes
and make it use the load-based P-state selection algorithm on a
wider range of systems in the active mode (Rafael Wysocki).
- Add cpufreq driver for Tegra186 (Mikko Perttunen).
- Add support for Gemini Lake SoCs to intel_pstate (David Box).
- Add support for MT8176 and MT817x to the Mediatek cpufreq driver
and clean up that driver a bit (Daniel Kurtz).
- Clean up intel_pstate and optimize it slightly (Rafael Wysocki).
- Update the schedutil cpufreq governor, mostly to fix a couple of
issues with it related to specific workloads, and rework its sysfs
tunable and initialization a bit (Rafael Wysocki, Viresh Kumar).
- Fix minor issues in the imx6q, dbx500 and qoriq cpufreq drivers
(Christophe Jaillet, Irina Tirdea, Leonard Crestez, Viresh Kumar,
YuanTian Tang).
- Add file patterns for cpufreq DT bindings to MAINTAINERS (Geert
Uytterhoeven).
- Add support for "always on" power domains to the genpd (generic
power domains) framework and clean up that code somewhat (Ulf
Hansson, Lina Iyer, Viresh Kumar).
- Fix minor issues in the powernv cpuidle driver and clean it up
(Anton Blanchard, Gautham Shenoy).
- Move the AnalyzeSuspend utility under tools/power/pm-graph/ and
add an analogous boot-profiling utility called AnalyzeBoot to it
(Todd Brandt).
- Add rk3328 support to the rockchip-io AVS (Adaptive Voltage
Scaling) driver (David Wu).
- Fix minor issues in the cpuidle core, the intel_pstate_tracer
utility, the devfreq framework and the PM core documentation
(Chanwoo Choi, Doug Smythies, Johan Hovold, Marcin Nowakowski).
Thanks!
---------------
Anton Blanchard (3):
cpuidle: powernv: Don't bounce between low and very low thread priority
cpuidle: powernv: Don't continually set thread priority in snooze_loop()
cpuidle: powernv: Avoid a branch in the core snooze_loop() loop
Chanwoo Choi (1):
PM / devfreq: Move struct devfreq_governor to devfreq directory
Christophe Jaillet (1):
cpufreq: imx6q: Fix error handling code
Daniel Kurtz (2):
cpufreq: mt8173: Mark mt8173_cpufreq_driver_init as __init
cpufreq: mediatek: Add support for MT8176 and MT817x
David E. Box (1):
cpufreq: intel_pstate: Add support for Gemini Lake
David Wu (1):
PM / AVS: rockchip-io: add io selectors and supplies for rk3328
Doug Smythies (1):
tools/power/x86/intel_pstate_tracer: Adjust directory ownership
Gautham R. Shenoy (1):
powernv-cpuidle: Validate DT property array size
Geert Uytterhoeven (1):
MAINTAINERS: Add file patterns for cpufreq device tree bindings
Irina Tirdea (1):
cpufreq: imx6q: Fix handling EPROBE_DEFER from regulator
Johan Hovold (2):
PM / runtime: Fix autosuspend documentation
PM / runtime: Document autosuspend-helper side effects
Leonard Crestez (1):
cpufreq: imx6q: Set max suspend_freq to avoid changes during suspend
Lina Iyer (1):
PM / Domains: Ignore domain-idle-states that are not compatible
Marcin Nowakowski (1):
cpuidle: cpuidle-cps: remove unused variable
Mikko Perttunen (1):
cpufreq: Add Tegra186 cpufreq driver
Rafael J. Wysocki (25):
cpufreq: intel_pstate: Drop redundant wrapper function
cpufreq: schedutil: Avoid reducing frequency of busy CPUs prematurely
cpufreq: schedutil: Trace frequency only if it has changed
cpufreq: intel_pstate: Support HWP processors in all operation modes
cpufreq: intel_pstate: Use load-based P-state selection more widely
cpufreq: intel_pstate: Active mode P-state limits rework
cpufreq: intel_pstate: Avoid transient updates of cpuinfo.max_freq
cpufreq: intel_pstate: Eliminate struct perf_limits
cpufreq: intel_pstate: Drop pointless initialization of PID parameters
cpufreq: intel_pstate: Initialize pid_params statically
cpufreq: intel_pstate: Fold intel_pstate_reset_all_pid() into the caller
cpufreq: intel_pstate: Clean up intel_pstate_busy_pid_reset()
cpufreq: intel_pstate: Set HWP sampling interval once
cpufreq: intel_pstate: Skip unnecessary PID resets on init
cpufreq: intel_pstate: Drop driver_registered variable
cpufreq: intel_pstate: Modify check in intel_pstate_update_status()
cpufreq: intel_pstate: Use different utilization update callbacks
cpufreq: intel_pstate: Add update_util callback to pstate_funcs
cpufreq: intel_pstate: Move cpu_defaults definitions
cpufreq: intel_pstate: Drop struct cpu_defaults
cpufreq: intel_pstate: Introduce pid_in_use()
cpufreq: intel_pstate: Do not walk policy->cpus
cpufreq: intel_pstate: Eliminate intel_pstate_get_min_max()
cpufreq: schedutil: Reduce frequencies slower
cpufreq: schedutil: Use policy-dependent transition delays
Todd E Brandt (3):
tools: power: pm-graph: AnalyzeSuspend v4.6
tools: power: pm-graph: AnalyzeBoot v2.0
tools: power: pm-graph: Package makefile and man pages
Ulf Hansson (4):
PM / Domains: Clean up code validating genpd's status
PM / Domains: Enable users of genpd to specify always on PM domains
PM / Domains: Respect errors from genpd's ->power_off() callback
PM / Domains: Don't warn about IRQ safe device for an always on PM domain
Viresh Kumar (4):
cpufreq: schedutil: Redefine the rate_limit_us tunable
cpufreq: schedutil: Refactor sugov_next_freq_shared()
cpufreq: dbx500: Manage cooling device from cpufreq driver
PM / Domain: remove conditional from error case
YuanTian Tang (1):
cpufreq: qoriq: enhance bus frequency calculation
---------------
.../devicetree/bindings/power/power_domain.txt | 4 +-
.../bindings/power/rockchip-io-domain.txt | 1 +
Documentation/power/runtime_pm.txt | 19 +-
MAINTAINERS | 1 +
arch/arm/boot/dts/ste-dbx5x0.dtsi | 5 -
drivers/base/power/domain.c | 68 +-
drivers/cpufreq/Kconfig.arm | 6 +
drivers/cpufreq/Makefile | 1 +
drivers/cpufreq/dbx500-cpufreq.c | 20 +
drivers/cpufreq/imx6q-cpufreq.c | 17 +-
drivers/cpufreq/intel_pstate.c | 910 +++++++++-----------
drivers/cpufreq/mt8173-cpufreq.c | 23 +-
drivers/cpufreq/qoriq-cpufreq.c | 24 +-
drivers/cpufreq/tegra186-cpufreq.c | 275 +++++++
drivers/cpuidle/cpuidle-cps.c | 3 +-
drivers/cpuidle/cpuidle-powernv.c | 69 +-
drivers/devfreq/governor.h | 29 +
drivers/power/avs/rockchip-io-domain.c | 41 +
drivers/thermal/Kconfig | 12 -
drivers/thermal/Makefile | 1 -
drivers/thermal/db8500_cpufreq_cooling.c | 105 ---
include/linux/cpufreq.h | 7 +
include/linux/devfreq.h | 30 +-
include/linux/pm_domain.h | 1 +
include/linux/tick.h | 1 +
kernel/sched/cpufreq_schedutil.c | 82 +-
kernel/time/tick-sched.c | 12 +
tools/power/pm-graph/Makefile | 28 +
tools/power/pm-graph/analyze_boot.py | 824 ++++++++++++++++++
.../power/pm-graph}/analyze_suspend.py | 916 +++++++++++----------
tools/power/pm-graph/bootgraph.8 | 132 +++
tools/power/pm-graph/sleepgraph.8 | 243 ++++++
.../x86/intel_pstate_tracer/intel_pstate_tracer.py | 17 +
33 files changed, 2774 insertions(+), 1153 deletions(-)