[PATCH 02/13] clk: sunxi-ng: add support for DE2 CCU

From: Icenowy Zheng
Date: Thu May 04 2017 - 07:43:40 EST

Next message: Icenowy Zheng: "[PATCH 03/13] dt-bindings: add bindings for DE2 on V3s SoC"
Previous message: Icenowy Zheng: "[PATCH 01/13] dt-bindings: add binding for the Allwinner DE2 CCU"
In reply to: Icenowy Zheng: "[PATCH 01/13] dt-bindings: add binding for the Allwinner DE2 CCU"
Next in thread: Icenowy Zheng: "[PATCH 03/13] dt-bindings: add bindings for DE2 on V3s SoC"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

The "Display Engine 2.0" in Allwinner newer SoCs contains a clock
management unit for its subunits, like the DE CCU in A80.

Add a sunxi-ng style driver for it.

Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
---
drivers/clk/sunxi-ng/Kconfig | 5 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun8i-de2.c | 218 +++++++++++++++++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun8i-de2.h | 28 +++++
4 files changed, 252 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-de2.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-de2.h

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 64088e599404..2e4d804fbf61 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -140,6 +140,11 @@ config SUN8I_V3S_CCU
default MACH_SUN8I
depends on MACH_SUN8I || COMPILE_TEST

+config SUN8I_DE2_CCU
+ bool "Support for the Allwinner SoCs DE2 CCU"
+ select SUNXI_CCU_DIV
+ select SUNXI_CCU_GATE
+
config SUN9I_A80_CCU
bool "Support for the Allwinner A80 CCU"
select SUNXI_CCU_DIV
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 0ec02fe14c50..be616279450e 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o
obj-$(CONFIG_SUN8I_V3S_CCU) += ccu-sun8i-v3s.o
+obj-$(CONFIG_SUN8I_DE2_CCU) += ccu-sun8i-de2.o
obj-$(CONFIG_SUN8I_R_CCU) += ccu-sun8i-r.o
obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80.o
obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-de.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
new file mode 100644
index 000000000000..adb2c344692a
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
@@ -0,0 +1,218 @@
+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy@xxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include "ccu_common.h"
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_reset.h"
+
+#include "ccu-sun8i-de2.h"
+
+static SUNXI_CCU_GATE(bus_mixer0_clk, "bus-mixer0", "bus-de",
+ 0x04, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_mixer1_clk, "bus-mixer1", "bus-de",
+ 0x04, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_wb_clk, "bus-wb", "bus-de",
+ 0x04, BIT(2), 0);
+
+static SUNXI_CCU_GATE(mixer0_clk, "mixer0", "mixer0-div",
+ 0x00, BIT(0), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(mixer1_clk, "mixer1", "mixer1-div",
+ 0x00, BIT(1), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(wb_clk, "wb", "wb-div",
+ 0x00, BIT(2), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M(mixer0_div_clk, "mixer0-div", "de", 0x0c, 0, 4,
+ CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M(mixer1_div_clk, "mixer1-div", "de", 0x0c, 4, 4,
+ CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M(wb_div_clk, "wb-div", "de", 0x0c, 8, 4,
+ CLK_SET_RATE_PARENT);
+
+static struct ccu_common *sunxi_de2_clks[] = {
+ &mixer0_clk.common,
+ &mixer1_clk.common,
+ &wb_clk.common,
+
+ &bus_mixer0_clk.common,
+ &bus_mixer1_clk.common,
+ &bus_wb_clk.common,
+
+ &mixer0_div_clk.common,
+ &mixer1_div_clk.common,
+ &wb_div_clk.common,
+};
+
+static struct clk_hw_onecell_data sunxi_de2_hw_clks = {
+ .hws = {
+ [CLK_MIXER0] = &mixer0_clk.common.hw,
+ [CLK_MIXER1] = &mixer1_clk.common.hw,
+ [CLK_WB] = &wb_clk.common.hw,
+
+ [CLK_BUS_MIXER0] = &bus_mixer0_clk.common.hw,
+ [CLK_BUS_MIXER1] = &bus_mixer1_clk.common.hw,
+ [CLK_BUS_WB] = &bus_wb_clk.common.hw,
+
+ [CLK_MIXER0_DIV] = &mixer0_div_clk.common.hw,
+ [CLK_MIXER1_DIV] = &mixer1_div_clk.common.hw,
+ [CLK_WB_DIV] = &wb_div_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun8i_a83t_de2_resets[] = {
+ [RST_MIXER0] = { 0x08, BIT(0) },
+ /*
+ * For A83T, H3 and R40, mixer1 reset line is shared with wb, so
+ * only RST_WB is exported here.
+ */
+ [RST_WB] = { 0x08, BIT(2) },
+};
+
+static struct ccu_reset_map sun50i_a64_de2_resets[] = {
+ [RST_MIXER0] = { 0x08, BIT(0) },
+ [RST_MIXER1] = { 0x08, BIT(1) },
+ [RST_WB] = { 0x08, BIT(2) },
+};
+
+static const struct sunxi_ccu_desc sun8i_a83t_de2_clk_desc = {
+ .ccu_clks = sunxi_de2_clks,
+ .num_ccu_clks = ARRAY_SIZE(sunxi_de2_clks),
+
+ .hw_clks = &sunxi_de2_hw_clks,
+
+ .resets = sun8i_a83t_de2_resets,
+ .num_resets = ARRAY_SIZE(sun8i_a83t_de2_resets),
+};
+
+static const struct sunxi_ccu_desc sun50i_a64_de2_clk_desc = {
+ .ccu_clks = sunxi_de2_clks,
+ .num_ccu_clks = ARRAY_SIZE(sunxi_de2_clks),
+
+ .hw_clks = &sunxi_de2_hw_clks,
+
+ .resets = sun50i_a64_de2_resets,
+ .num_resets = ARRAY_SIZE(sun50i_a64_de2_resets),
+};
+
+static int sunxi_de2_clk_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct clk *bus_clk, *mod_clk;
+ struct reset_control *rstc;
+ void __iomem *reg;
+ const struct sunxi_ccu_desc *ccu_desc;
+ int ret;
+
+ ccu_desc = of_device_get_match_data(&pdev->dev);
+ if (!ccu_desc)
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reg = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(reg))
+ return PTR_ERR(reg);
+
+ bus_clk = devm_clk_get(&pdev->dev, "bus");
+ if (IS_ERR(bus_clk)) {
+ ret = PTR_ERR(bus_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
+ return ret;
+ }
+
+ mod_clk = devm_clk_get(&pdev->dev, "mod");
+ if (IS_ERR(mod_clk)) {
+ ret = PTR_ERR(mod_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Couldn't get mod clk: %d\n", ret);
+ return ret;
+ }
+
+ rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(rstc)) {
+ ret = PTR_ERR(bus_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "Couldn't get reset control: %d\n", ret);
+ return ret;
+ }
+
+ /* The clocks need to be enabled for us to access the registers */
+ ret = clk_prepare_enable(bus_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't enable bus clk: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(mod_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't enable mod clk: %d\n", ret);
+ return ret;
+ }
+
+ /* The reset control needs to be asserted for the controls to work */
+ ret = reset_control_deassert(rstc);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Couldn't deassert reset control: %d\n", ret);
+ goto err_disable_clk;
+ }
+
+ ret = sunxi_ccu_probe(pdev->dev.of_node, reg, ccu_desc);
+ if (ret)
+ goto err_assert_reset;
+
+ return 0;
+
+err_assert_reset:
+ reset_control_assert(rstc);
+err_disable_clk:
+ clk_disable_unprepare(bus_clk);
+ return ret;
+}
+
+static const struct of_device_id sunxi_de2_clk_ids[] = {
+ {
+ .compatible = "allwinner,sun8i-a83t-de2-clk",
+ .data = &sun8i_a83t_de2_clk_desc,
+ },
+ {
+ .compatible = "allwinner,sun50i-h5-de2-clk",
+ .data = &sun50i_a64_de2_clk_desc,
+ },
+ /*
+ * The Allwinner A64 SoC needs some bit to be poke in syscon to make
+ * DE2 really working.
+ * So there's currently no A64 compatible here.
+ * H5 shares the same reset line with A64, so here H5 is using the
+ * clock description of A64.
+ */
+ { }
+};
+
+static struct platform_driver sunxi_de2_clk_driver = {
+ .probe = sunxi_de2_clk_probe,
+ .driver = {
+ .name = "sunxi-de2-clks",
+ .of_match_table = sunxi_de2_clk_ids,
+ },
+};
+builtin_platform_driver(sunxi_de2_clk_driver);
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.h b/drivers/clk/sunxi-ng/ccu-sun8i-de2.h
new file mode 100644
index 000000000000..530c006e0ae9
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2016 Icenowy Zheng <icenowy@xxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN8I_DE2_H_
+#define _CCU_SUN8I_DE2_H_
+
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+
+/* Intermediary clock dividers are not exported */
+#define CLK_MIXER0_DIV 3
+#define CLK_MIXER1_DIV 4
+#define CLK_WB_DIV 5
+
+#define CLK_NUMBER (CLK_WB + 1)
+
+#endif /* _CCU_SUN8I_DE2_H_ */
--
2.12.2

Next message: Icenowy Zheng: "[PATCH 03/13] dt-bindings: add bindings for DE2 on V3s SoC"
Previous message: Icenowy Zheng: "[PATCH 01/13] dt-bindings: add binding for the Allwinner DE2 CCU"
In reply to: Icenowy Zheng: "[PATCH 01/13] dt-bindings: add binding for the Allwinner DE2 CCU"
Next in thread: Icenowy Zheng: "[PATCH 03/13] dt-bindings: add bindings for DE2 on V3s SoC"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]