Re: [PATCH v10 2/3] backlight arcxcnn devicetree bindings for ArcticSand

[Lee Jones]

On Wed, 03 May 2017, Olimpiu Dejeu wrote:

> backlight: Add devicetree bindings for the Arctic Sand backlight driver
> This patch provides devicetree bindings for the Arctic Sand
>     driver submitted in the previous patch
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> Acked-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
> Signed-off-by: Olimpiu Dejeu <olimpiu@xxxxxxxxxxxxxx>

Same points as I made in [PATCH 3/3]

> ---
> v9 => v10:
> - Per Rob Herring's request changed vendor-prefix to arctic
> v8 => v9:
> - Version updated to match other patch in set. No other changes.
> v7 => v8:
> - Version updated to match other patch in set. No other changes.
> v6 => v7:
> - Version updated to match other patch in set. No other changes.
> v5 => v6:
> - Version updated to match other patch in set. No other changes.
> v4 => v5:
> - Added spaces for increased readability per Lee Jones
> v3 => v4:
> - Added spaces for increased readability per Lee Jones
> v2 => v3:
> - Version updated to match other patch in set. No other changes.
> v1 => v2:
> - Version updated to match other patch in set. No other changes.
> 
>  .../bindings/leds/backlight/arcxcnn_bl.txt         | 33 ++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
> 
> diff --git a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
> new file mode 100644
> index 0000000..ecb7731
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
> @@ -0,0 +1,33 @@
> +Binding for ArcticSand arc2c0608 LED driver
> +
> +Required properties:
> +- compatible:		should be "arctic,arc2c0608"
> +- reg:			slave address
> +
> +Optional properties:
> +- default-brightness:	brightness value on boot, value from: 0-4095
> +- label:		The name of the backlight device
> +			See Documentation/devicetree/bindings/leds/common.txt
> +- led-sources:		List of enabled channels from 0 to 5.
> +			See Documentation/devicetree/bindings/leds/common.txt
> +
> +- arctic,led-config-0:	setting for register ILED_CONFIG_0
> +- arctic,led-config-1:	setting for register ILED_CONFIG_1
> +- arctic,dim-freq:		PWM mode frequence setting (bits [3:0] used)
> +- arctic,comp-config:	setting for register CONFIG_COMP
> +- arctic,filter-config:	setting for register FILTER_CONFIG
> +- arctic,trim-config:	setting for register IMAXTUNE
> +
> +Note: Optional properties not specified will default to values in IC EPROM
> +
> +Example:
> +
> +arc2c0608@30 {
> +	compatible = "arctic,arc2c0608";
> +	reg = <0x30>;
> +	default-brightness = <500>;
> +	label = "lcd-backlight";
> +	linux,default-trigger = "backlight";
> +	led-sources = <0 1 2 5>;
> +};
> +

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog