Re: [PATCH 2/3] iommu/pci: reserve iova for PCI masters
From: Oza Oza
Date: Fri May 05 2017 - 04:10:48 EST
On Thu, May 4, 2017 at 11:50 PM, Robin Murphy <robin.murphy@xxxxxxx> wrote:
> On 03/05/17 05:46, Oza Pawandeep wrote:
>> this patch reserves the iova for PCI masters.
>> ARM64 based SOCs may have scattered memory banks.
>> such as iproc based SOC has
>>
>> <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */
>> <0x00000008 0x80000000 0x3 0x80000000>, /* 14G @ 34G */
>> <0x00000090 0x00000000 0x4 0x00000000>, /* 16G @ 576G */
>> <0x000000a0 0x00000000 0x4 0x00000000>; /* 16G @ 640G */
>>
>> but incoming PCI transcation addressing capability is limited
>> by host bridge, for example if max incoming window capability
>> is 512 GB, then 0x00000090 and 0x000000a0 will fall beyond it.
>>
>> to address this problem, iommu has to avoid allocating iovas which
>> are reserved. which inturn does not allocate iova if it falls into hole.
>
> I don't necessarily disagree with doing this, as we could do with facing
> up to the issue of discontiguous DMA ranges in particular (I too have a
> platform with this problem), but I'm still not overly keen on pulling DT
> specifics into this layer. More than that, though, if we are going to do
> it, then we should do it for all devices with a restrictive
> "dma-ranges", not just PCI ones.
>
pci_create_root_bus allocates host bridge, and currently it takes only
oubound resources.
if inbound memory is also added as a part of pci_create_root_bus params,
then IOVA allocation can directly make use of inbound_windows member
of structure pci_host_bridge.
struct pci_host_bridge {
struct device dev;
struct pci_bus *bus; /* root bus */
struct list_head windows; /* resource_entry */
struct list_head inbound_windows; /* resource_entry */
.
.
}
so iova_reserve_pci_windows can iterate throough
resource_list_for_each_entry(window, &bridge->inbound_windows)
this way we can remove the dependency of dma-iommu.c on OF layer.
but only thing is:
pci_create_root_bus is called by handful of RC drivers, which needs to change.
ideally if you see both inbound and outbound resource should belong to
pci_host_bridge anyway.
and inbound is completely missing.
let me know your thoughts on this, Robin.
>> Bug: SOC-5216
>> Change-Id: Icbfc99a045d730be143fef427098c937b9d46353
>> Signed-off-by: Oza Pawandeep <oza.oza@xxxxxxxxxxxx>
>> Reviewed-on: http://gerrit-ccxsw.broadcom.net/40760
>> Reviewed-by: vpx_checkpatch status <vpx_checkpatch@xxxxxxxxxxxx>
>> Reviewed-by: CCXSW <ccxswbuild@xxxxxxxxxxxx>
>> Tested-by: vpx_autobuild status <vpx_autobuild@xxxxxxxxxxxx>
>> Tested-by: vpx_smoketest status <vpx_smoketest@xxxxxxxxxxxx>
>> Tested-by: CCXSW <ccxswbuild@xxxxxxxxxxxx>
>> Reviewed-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
>>
>> diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
>> index 48d36ce..08764b0 100644
>> --- a/drivers/iommu/dma-iommu.c
>> +++ b/drivers/iommu/dma-iommu.c
>> @@ -27,6 +27,7 @@
>> #include <linux/iova.h>
>> #include <linux/irq.h>
>> #include <linux/mm.h>
>> +#include <linux/of_pci.h>
>> #include <linux/pci.h>
>> #include <linux/scatterlist.h>
>> #include <linux/vmalloc.h>
>> @@ -171,8 +172,12 @@ static void iova_reserve_pci_windows(struct pci_dev *dev,
>> struct iova_domain *iovad)
>> {
>> struct pci_host_bridge *bridge = pci_find_host_bridge(dev->bus);
>> + struct device_node *np = bridge->dev.parent->of_node;
>> struct resource_entry *window;
>> unsigned long lo, hi;
>> + int ret;
>> + dma_addr_t tmp_dma_addr = 0, dma_addr;
>> + LIST_HEAD(res);
>>
>> resource_list_for_each_entry(window, &bridge->windows) {
>> if (resource_type(window->res) != IORESOURCE_MEM &&
>> @@ -183,6 +188,36 @@ static void iova_reserve_pci_windows(struct pci_dev *dev,
>> hi = iova_pfn(iovad, window->res->end - window->offset);
>> reserve_iova(iovad, lo, hi);
>> }
>> +
>> + /* PCI inbound memory reservation. */
>> + ret = of_pci_get_dma_ranges(np, &res);
>> + if (!ret) {
>> + resource_list_for_each_entry(window, &res) {
>> + struct resource *res_dma = window->res;
>> +
>> + dma_addr = res_dma->start - window->offset;
>> + if (tmp_dma_addr > dma_addr) {
>> + pr_warn("PCI: failed to reserve iovas; ranges should be sorted\n");
>
> I don't see anything in the DT spec about the entries having to be
> sorted, and it's not exactly impossible to sort a list if you need it so
> (and if I'm being really pedantic, one could still trigger this with a
> list that *is* sorted, only by different criteria).
>
> Robin.
>
>> + return;
>> + }
>> + if (tmp_dma_addr != dma_addr) {
>> + lo = iova_pfn(iovad, tmp_dma_addr);
>> + hi = iova_pfn(iovad, dma_addr - 1);
>> + reserve_iova(iovad, lo, hi);
>> + }
>> + tmp_dma_addr = window->res->end - window->offset;
>> + }
>> + /*
>> + * the last dma-range should honour based on the
>> + * 32/64-bit dma addresses.
>> + */
>> + if (tmp_dma_addr < DMA_BIT_MASK(sizeof(dma_addr_t) * 8)) {
>> + lo = iova_pfn(iovad, tmp_dma_addr);
>> + hi = iova_pfn(iovad,
>> + DMA_BIT_MASK(sizeof(dma_addr_t) * 8) - 1);
>> + reserve_iova(iovad, lo, hi);
>> + }
>> + }
>> }
>>
>> /**
>>
>