Re: [PATCH 5/5] phy: bcm-ns-usb3: add MDIO driver using proper bus layer

[Florian Fainelli]

On 05/11/2017 06:29 AM, RafaÅ MiÅecki wrote:
> From: RafaÅ MiÅecki <rafal@xxxxxxxxxx>
> 
> As USB 3.0 PHY is attached to the MDIO bus this module should provide a
> MDIO driver and use a proper bus layer. This is a proper (cleaner)
> solution which doesn't require code to know this specific MDIO bus
> details. It also allows reusing the driver with other MDIO buses.
> 
> Signed-off-by: RafaÅ MiÅecki <rafal@xxxxxxxxxx>
> ---
>  drivers/phy/Kconfig           |  1 +
>  drivers/phy/phy-bcm-ns-usb3.c | 98 ++++++++++++++++++++++++++++++++++++++++++-
>  2 files changed, 98 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index afaf7b643eeb..2a9186b98ae0 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -29,6 +29,7 @@ config PHY_BCM_NS_USB3
>  	depends on ARCH_BCM_IPROC || COMPILE_TEST
>  	depends on HAS_IOMEM && OF
>  	select GENERIC_PHY
> +	select PHYLIB

Should not this be select MDIO_DEVICE instead? 4.11 introduced the
possibility to build support for MDIO bus/devices without requiring PHYLIB.

>  	help
>  	  Enable this to support Broadcom USB 3.0 PHY connected to the USB
>  	  controller on Northstar family.
> diff --git a/drivers/phy/phy-bcm-ns-usb3.c b/drivers/phy/phy-bcm-ns-usb3.c
> index 2c9a0d5f43d8..389f5e5a6238 100644
> --- a/drivers/phy/phy-bcm-ns-usb3.c
> +++ b/drivers/phy/phy-bcm-ns-usb3.c
> @@ -16,7 +16,9 @@
>  #include <linux/bcma/bcma.h>
>  #include <linux/delay.h>
>  #include <linux/err.h>
> +#include <linux/mdio.h>
>  #include <linux/module.h>
> +#include <linux/of_address.h>
>  #include <linux/of_platform.h>
>  #include <linux/platform_device.h>
>  #include <linux/phy/phy.h>
> @@ -52,6 +54,7 @@ struct bcm_ns_usb3 {
>  	enum bcm_ns_family family;
>  	void __iomem *dmp;
>  	void __iomem *ccb_mii;
> +	struct mdio_device *mdiodev;
>  	struct phy *phy;
>  
>  	int (*phy_write)(struct bcm_ns_usb3 *usb3, u16 reg, u16 value);
> @@ -183,6 +186,77 @@ static const struct phy_ops ops = {
>  };
>  
>  /**************************************************
> + * MDIO driver code
> + **************************************************/
> +
> +static int bcm_ns_usb3_mdiodev_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,
> +					 u16 value)
> +{
> +	struct mdio_device *mdiodev = usb3->mdiodev;
> +
> +	return mdiobus_write(mdiodev->bus, mdiodev->addr, reg, value);
> +}
> +
> +static int bcm_ns_usb3_mdio_probe(struct mdio_device *mdiodev)
> +{
> +	struct device *dev = &mdiodev->dev;
> +	const struct of_device_id *of_id;
> +	struct phy_provider *phy_provider;
> +	struct device_node *syscon_np;
> +	struct bcm_ns_usb3 *usb3;
> +	struct resource res;
> +	int err;
> +
> +	usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL);
> +	if (!usb3)
> +		return -ENOMEM;
> +
> +	usb3->dev = dev;
> +	usb3->mdiodev = mdiodev;
> +
> +	of_id = of_match_device(bcm_ns_usb3_id_table, dev);
> +	if (!of_id)
> +		return -EINVAL;
> +	usb3->family = (enum bcm_ns_family)of_id->data;
> +
> +	syscon_np = of_parse_phandle(dev->of_node, "usb3-dmp-syscon", 0);
> +	err = of_address_to_resource(syscon_np, 0, &res);
> +	of_node_put(syscon_np);
> +	if (err)
> +		return err;
> +
> +	usb3->dmp = devm_ioremap_resource(dev, &res);
> +	if (IS_ERR(usb3->dmp)) {
> +		dev_err(dev, "Failed to map DMP regs\n");
> +		return PTR_ERR(usb3->dmp);
> +	}
> +
> +	usb3->phy_write = bcm_ns_usb3_mdiodev_phy_write;
> +
> +	usb3->phy = devm_phy_create(dev, NULL, &ops);
> +	if (IS_ERR(usb3->phy)) {
> +		dev_err(dev, "Failed to create PHY\n");
> +		return PTR_ERR(usb3->phy);
> +	}
> +
> +	phy_set_drvdata(usb3->phy, usb3);
> +
> +	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +
> +	return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static struct mdio_driver bcm_ns_usb3_mdio_driver = {
> +	.mdiodrv = {
> +		.driver = {
> +			.name = "bcm_ns_mdio_usb3",
> +			.of_match_table = bcm_ns_usb3_id_table,
> +		},
> +	},
> +	.probe = bcm_ns_usb3_mdio_probe,
> +};
> +
> +/**************************************************
>   * Platform driver code
>   **************************************************/
>  
> @@ -297,6 +371,28 @@ static struct platform_driver bcm_ns_usb3_driver = {
>  		.of_match_table = bcm_ns_usb3_id_table,
>  	},
>  };
> -module_platform_driver(bcm_ns_usb3_driver);
> +
> +static int __init bcm_ns_usb3_module_init(void)
> +{
> +	int err;
> +
> +	err = mdio_driver_register(&bcm_ns_usb3_mdio_driver);
> +	if (err)
> +		return err;
> +
> +	err = platform_driver_register(&bcm_ns_usb3_driver);
> +	if (err)
> +		mdio_driver_unregister(&bcm_ns_usb3_mdio_driver);
> +
> +	return err;
> +}
> +module_init(bcm_ns_usb3_module_init);
> +
> +static void __exit bcm_ns_usb3_module_exit(void)
> +{
> +	platform_driver_unregister(&bcm_ns_usb3_driver);
> +	mdio_driver_unregister(&bcm_ns_usb3_mdio_driver);
> +}
> +module_exit(bcm_ns_usb3_module_exit)

Do we need to keep both platform device and mdio device registration
here? Do you have a depreciation time line for when we can entirely
switch to mdio device (assuming this is for backwards compatibility)?
-- 
Florian