[PATCH 1/2] ARM: dts: qcom-apq8064: Collapse usb support into one node

From: John Stultz
Date: Fri May 12 2017 - 17:18:30 EST

Next message: John Stultz: "[PATCH 2/2] ARM: dts: nexus7: Add regulator tweaks and wcnss entry to support wifi"
Previous message: John Stultz: "[RFC][PATCH 0/2] Few DTS changes needed for Nexus7 support"
In reply to: John Stultz: "[RFC][PATCH 0/2] Few DTS changes needed for Nexus7 support"
Next in thread: Bjorn Andersson: "Re: [PATCH 1/2] ARM: dts: qcom-apq8064: Collapse usb support into one node"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: Stephen Boyd <stephen.boyd@xxxxxxxxxx>

We currently have three device nodes for the same USB hardware
block, as evident by the reuse of the same reg address multiple
times. Now that the chipidea driver fully supports OTG with the
MSM wrapper we can collapse the three nodes into one USB device
node, reflecting the true nature of the hardware.

Since we're here, we also mark the irq trigger flags correctly,
as IRQ_TYPE_LEVEL_HIGH instead of IRQ_TYPE_NONE.

Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Cc: Nicolas Dechesne <nicolas.dechesne@xxxxxxxxxx>
Cc: Stephen Boyd <stephen.boyd@xxxxxxxxxx>
Cc: Andy Gross <andy.gross@xxxxxxxxxx>
Cc: Rob Clark <robdclark@xxxxxxxxx>
Cc: Vinay Simha <simhavcs@xxxxxxxxx>
Cc: David Brown <david.brown@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Signed-off-by: Stephen Boyd <stephen.boyd@xxxxxxxxxx>
Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
---
.../arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts | 49 +++----
arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 21 +--
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 54 ++++----
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 54 ++++----
.../arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts | 16 +--
arch/arm/boot/dts/qcom-apq8064.dtsi | 154 ++++++++++++---------
6 files changed, 169 insertions(+), 179 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
index 8f5de02..c5f561f 100644
--- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
@@ -319,44 +319,37 @@
target-supply = <&pm8921_lvs7>;
};

- /* OTG */
- phy@12500000 {
- status = "okay";
- dr_mode = "peripheral";
- vddcx-supply = <&pm8921_s3>;
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l4>;
- };
-
- phy@12520000 {
- status = "okay";
- vddcx-supply = <&pm8921_s3>;
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l23>;
- };
-
- phy@12530000 {
- status = "okay";
- vddcx-supply = <&pm8921_s3>;
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l23>;
- };
-
- gadget@12500000 {
- status = "okay";
- };
-
- /* OTG */
usb@12500000 {
status = "okay";
+ dr_mode = "peripheral";
+ ulpi {
+ phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+ };
+ };
};

usb@12520000 {
status = "okay";
+ dr_mode = "otg";
+ ulpi {
+ phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+ };
};

usb@12530000 {
status = "okay";
+ dr_mode = "otg";
+ ulpi {
+ phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+ };
};

amba {
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index e39440a..e5fef32 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -320,22 +320,15 @@
};
};

- /* OTG */
- phy@12500000 {
- status = "okay";
- vddcx-supply = <&pm8921_s3>;
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l4>;
- dr_mode = "otg";
- };
-
- gadget@12500000 {
- status = "okay";
- };
-
- /* OTG */
usb@12500000 {
status = "okay";
+ dr_mode = "otg";
+ ulpi {
+ phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+ };
+ };
};

amba {
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 35f1d46..d736203 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -149,43 +149,37 @@
};
};

- /* OTG */
- usb1_phy: phy@12500000 {
- status = "okay";
- vddcx-supply = <&pm8921_s3>;
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l4>;
- };
-
- usb3_phy: phy@12520000 {
- status = "okay";
- vddcx-supply = <&pm8921_s3>;
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l23>;
- };
-
- usb4_phy: phy@12530000 {
- status = "okay";
- vddcx-supply = <&pm8921_s3>;
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l23>;
- };
-
- gadget1: gadget@12500000 {
- status = "ok";
- };
-
- /* OTG */
- usb1: usb@12500000 {
+ usb@12500000 {
status = "ok";
+ dr_mode = "otg";
+ ulpi {
+ phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+ };
+ };
};

- usb3: usb@12520000 {
+ usb@12520000 {
status = "okay";
+ dr_mode = "host";
+ ulpi {
+ phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+ };
};

- usb4: usb@12530000 {
+ usb@12530000 {
status = "okay";
+ dr_mode = "host";
+ ulpi {
+ phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+ };
};

/* on board fixed 3.3v supply */
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 881ce70..bbd1dac 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -243,43 +243,37 @@
target-supply = <&pm8921_s4>;
};

- /* OTG */
- usb1_phy: phy@12500000 {
- status = "okay";
- vddcx-supply = <&pm8921_s3>;
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l4>;
- };
-
- usb3_phy: phy@12520000 {
- status = "okay";
- vddcx-supply = <&pm8921_s3>;
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l23>;
- };
-
- usb4_phy: phy@12530000 {
- status = "okay";
- vddcx-supply = <&pm8921_s3>;
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l23>;
- };
-
- gadget1: gadget@12500000 {
- status = "okay";
- };
-
- /* OTG */
- usb1: usb@12500000 {
+ usb@12500000 {
status = "okay";
+ dr_mode = "otg";
+ ulpi {
+ phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+ };
+ };
};

- usb3: usb@12520000 {
+ usb@12520000 {
status = "okay";
+ dr_mode = "host";
+ ulpi {
+ phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+ };
};

- usb4: usb@12530000 {
+ usb@12530000 {
status = "okay";
+ dr_mode = "host";
+ ulpi {
+ phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+ };
};

pci@1b500000 {
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
index a34ba35..88a9aff4 100644
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
@@ -349,15 +349,15 @@
};
};

- phy@12500000 {
- status = "okay";
- vddcx-supply = <&pm8921_s3>;
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l4>;
- };
-
- gadget@12500000 {
+ usb@12500000 {
status = "okay";
+ dr_mode = "otg";
+ ulpi {
+ phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+ };
+ };
};

gsbi@1a200000 {
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 14a6f5e..f3db185 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -197,7 +197,7 @@
clock-frequency = <27000000>;
};

- sleep_clk {
+ sleep_clk: sleep_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
@@ -884,81 +884,97 @@
};
};

- usb1_phy: phy@12500000 {
- compatible = "qcom,usb-otg-ci";
- reg = <0x12500000 0x400>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;
- status = "disabled";
-
- clocks = <&gcc USB_HS1_XCVR_CLK>,
- <&gcc USB_HS1_H_CLK>;
- clock-names = "core", "iface";
-
- resets = <&gcc USB_HS1_RESET>;
- reset-names = "link";
- };
-
- usb3_phy: phy@12520000 {
- compatible = "qcom,usb-otg-ci";
- reg = <0x12520000 0x400>;
- interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
- status = "disabled";
- dr_mode = "host";
-
- clocks = <&gcc USB_HS3_XCVR_CLK>,
- <&gcc USB_HS3_H_CLK>;
- clock-names = "core", "iface";
-
- resets = <&gcc USB_HS3_RESET>;
- reset-names = "link";
- };
-
- usb4_phy: phy@12530000 {
- compatible = "qcom,usb-otg-ci";
- reg = <0x12530000 0x400>;
- interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>;
- status = "disabled";
- dr_mode = "host";
-
- clocks = <&gcc USB_HS4_XCVR_CLK>,
- <&gcc USB_HS4_H_CLK>;
- clock-names = "core", "iface";
-
- resets = <&gcc USB_HS4_RESET>;
- reset-names = "link";
- };
-
- gadget1: gadget@12500000 {
- compatible = "qcom,ci-hdrc";
- reg = <0x12500000 0x400>;
- status = "disabled";
- dr_mode = "peripheral";
- interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;
- usb-phy = <&usb1_phy>;
- };
-
usb1: usb@12500000 {
- compatible = "qcom,ehci-host";
- reg = <0x12500000 0x400>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;
- status = "disabled";
- usb-phy = <&usb1_phy>;
+ compatible = "qcom,ci-hdrc";
+ reg = <0x12500000 0x200>,
+ <0x12500200 0x200>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;
+ clock-names = "core", "iface";
+ assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;
+ assigned-clock-rates = <60000000>;
+ resets = <&gcc USB_HS1_RESET>;
+ reset-names = "core";
+ phy_type = "ulpi";
+ ahb-burst-config = <0>;
+ phys = <&usb_hs1_phy>;
+ phy-names = "usb-phy";
+ status = "disabled";
+ #reset-cells = <1>;
+
+ ulpi {
+ usb_hs1_phy: phy {
+ compatible = "qcom,usb-hs-phy-apq8064",
+ "qcom,usb-hs-phy";
+ #phy-cells = <0>;
+ clocks = <&sleep_clk>, <&cxo_board>;
+ clock-names = "sleep", "ref";
+ resets = <&usb1 0>;
+ reset-names = "por";
+ };
+ };
};

usb3: usb@12520000 {
- compatible = "qcom,ehci-host";
- reg = <0x12520000 0x400>;
- interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
- status = "disabled";
- usb-phy = <&usb3_phy>;
+ compatible = "qcom,ci-hdrc";
+ reg = <0x12520000 0x200>,
+ <0x12520200 0x200>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc USB_HS3_XCVR_CLK>, <&gcc USB_HS3_H_CLK>;
+ clock-names = "core", "iface";
+ assigned-clocks = <&gcc USB_HS3_XCVR_CLK>;
+ assigned-clock-rates = <60000000>;
+ resets = <&gcc USB_HS3_RESET>;
+ reset-names = "core";
+ phy_type = "ulpi";
+ ahb-burst-config = <0>;
+ phys = <&usb_hs3_phy>;
+ phy-names = "usb-phy";
+ status = "disabled";
+ #reset-cells = <1>;
+
+ ulpi {
+ usb_hs3_phy: phy {
+ compatible = "qcom,usb-hs-phy-apq8064",
+ "qcom,usb-hs-phy";
+ #phy-cells = <0>;
+ clocks = <&sleep_clk>, <&cxo_board>;
+ clock-names = "sleep", "ref";
+ resets = <&usb3 0>;
+ reset-names = "por";
+ };
+ };
};

usb4: usb@12530000 {
- compatible = "qcom,ehci-host";
- reg = <0x12530000 0x400>;
- interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>;
- status = "disabled";
- usb-phy = <&usb4_phy>;
+ compatible = "qcom,ci-hdrc";
+ reg = <0x12530000 0x200>,
+ <0x12530200 0x200>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc USB_HS4_XCVR_CLK>, <&gcc USB_HS4_H_CLK>;
+ clock-names = "core", "iface";
+ assigned-clocks = <&gcc USB_HS4_XCVR_CLK>;
+ assigned-clock-rates = <60000000>;
+ resets = <&gcc USB_HS4_RESET>;
+ reset-names = "core";
+ phy_type = "ulpi";
+ ahb-burst-config = <0>;
+ phys = <&usb_hs4_phy>;
+ phy-names = "usb-phy";
+ status = "disabled";
+ #reset-cells = <1>;
+
+ ulpi {
+ usb_hs4_phy: phy {
+ compatible = "qcom,usb-hs-phy-apq8064",
+ "qcom,usb-hs-phy";
+ #phy-cells = <0>;
+ clocks = <&sleep_clk>, <&cxo_board>;
+ clock-names = "sleep", "ref";
+ resets = <&usb4 0>;
+ reset-names = "por";
+ };
+ };
};

sata_phy0: phy@1b400000 {
--
2.7.4

Next message: John Stultz: "[PATCH 2/2] ARM: dts: nexus7: Add regulator tweaks and wcnss entry to support wifi"
Previous message: John Stultz: "[RFC][PATCH 0/2] Few DTS changes needed for Nexus7 support"
In reply to: John Stultz: "[RFC][PATCH 0/2] Few DTS changes needed for Nexus7 support"
Next in thread: Bjorn Andersson: "Re: [PATCH 1/2] ARM: dts: qcom-apq8064: Collapse usb support into one node"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]