Re: [PATCH v3 03/21] ARM: dts: omap: Add generic compatible string for I2C EEPROM

[Javier Martinez Canillas]

Hello Rob,

On Thu, Apr 20, 2017 at 1:56 AM, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Thu, Apr 13, 2017 at 10:04:27PM -0300, Javier Martinez Canillas wrote:
>> The at24 driver allows to register I2C EEPROM chips using different vendor
>> and devices, but the I2C subsystem does not take the vendor into account
>> when matching using the I2C table since it only has device entries.
>>
>> But when matching using an OF table, both the vendor and device has to be
>> taken into account so the driver defines only a set of compatible strings
>> using the "atmel" vendor as a generic fallback for compatible I2C devices.
>>
>> So add this generic fallback to the device node compatible string to make
>> the device to match the driver using the OF device ID table.
>>
>> Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
>> ---
>>
>> Changes in v3: None
>> Changes in v2: None
>>
>>  arch/arm/boot/dts/am335x-baltos.dtsi            |  2 +-
>>  arch/arm/boot/dts/am335x-base0033.dts           |  2 +-
>>  arch/arm/boot/dts/am335x-bone-common.dtsi       | 10 +++++-----
>>  arch/arm/boot/dts/am335x-nano.dts               |  2 +-
>>  arch/arm/boot/dts/am335x-pepper.dts             |  2 +-
>>  arch/arm/boot/dts/am335x-shc.dts                |  2 +-
>>  arch/arm/boot/dts/am335x-sl50.dts               |  2 +-
>>  arch/arm/boot/dts/am437x-idk-evm.dts            |  2 +-
>>  arch/arm/boot/dts/am437x-sk-evm.dts             |  2 +-
>>  arch/arm/boot/dts/am43x-epos-evm.dts            |  2 +-
>>  arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi |  2 +-
>>  arch/arm/boot/dts/omap3-cm-t3x.dtsi             |  2 +-
>>  arch/arm/boot/dts/omap3-gta04.dtsi              |  2 +-
>>  arch/arm/boot/dts/omap3-sb-t35.dtsi             |  2 +-
>>  arch/arm/boot/dts/omap4-var-som-om44.dtsi       |  2 +-
>>  arch/arm/boot/dts/omap5-cm-t54.dts              |  2 +-
>>  arch/arm/boot/dts/omap5-sbc-t54.dts             |  2 +-
>>  17 files changed, 21 insertions(+), 21 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
>> index d42b98f15e8b..6ca780d0623f 100644
>> --- a/arch/arm/boot/dts/am335x-baltos.dtsi
>> +++ b/arch/arm/boot/dts/am335x-baltos.dtsi
>> @@ -255,7 +255,7 @@
>>       };
>>
>>       at24@50 {
>> -             compatible = "at24,24c02";
>> +             compatible = "at24,24c02", "atmel,24c02";
>
> I think you can just drop the at24 compatibles. A new kernel doesn't
> need it. An old kernel ignores the manufacturer. I checked that u-boot
> only matches on "atmel,*", so okay there. Don't know about the *BSDs. I
> couldn't find anything.
>

That's a very good point, it doesn't make sense indeed to keep them,
since the vendor prefix can as you said be ignored (until the OF
modalias report is fixed).

I'll re-spin the series dropping them. Thanks a lot.

Best regards,
Javier