[PATCH] dt-bindings: net: move FMan binding
From: Madalin Bucur
Date: Mon May 15 2017 - 09:37:00 EST
Besides the PPC SoCs, the QorIQ DPAA FMan is also present on ARM SoCs,
moving the device tree binding document into the bindings/net folder.
Signed-off-by: Madalin Bucur <madalin.bucur@xxxxxxx>
---
Documentation/devicetree/bindings/net/fsl-fman.txt | 657 +++++++++++++++++++++
.../devicetree/bindings/powerpc/fsl/fman.txt | 657 ---------------------
2 files changed, 657 insertions(+), 657 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/fsl-fman.txt
delete mode 100644 Documentation/devicetree/bindings/powerpc/fsl/fman.txt
diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt
new file mode 100644
index 0000000..df873d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl-fman.txt
@@ -0,0 +1,657 @@
+=============================================================================
+Freescale Frame Manager Device Bindings
+
+CONTENTS
+ - FMan Node
+ - FMan Port Node
+ - FMan MURAM Node
+ - FMan dTSEC/XGEC/mEMAC Node
+ - FMan IEEE 1588 Node
+ - FMan MDIO Node
+ - Example
+
+=============================================================================
+FMan Node
+
+DESCRIPTION
+
+Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs,
+etc.) the FMan node will have child nodes for each of them.
+
+PROPERTIES
+
+- compatible
+ Usage: required
+ Value type: <stringlist>
+ Definition: Must include "fsl,fman"
+ FMan version can be determined via FM_IP_REV_1 register in the
+ FMan block. The offset is 0xc4 from the beginning of the
+ Frame Processing Manager memory map (0xc3000 from the
+ beginning of the FMan node).
+
+- cell-index
+ Usage: required
+ Value type: <u32>
+ Definition: Specifies the index of the FMan unit.
+
+ The cell-index value may be used by the SoC, to identify the
+ FMan unit in the SoC memory map. In the table below,
+ there's a description of the cell-index use in each SoC:
+
+ - P1023:
+ register[bit] FMan unit cell-index
+ ============================================================
+ DEVDISR[1] 1 0
+
+ - P2041, P3041, P4080 P5020, P5040:
+ register[bit] FMan unit cell-index
+ ============================================================
+ DCFG_DEVDISR2[6] 1 0
+ DCFG_DEVDISR2[14] 2 1
+ (Second FM available only in P4080 and P5040)
+
+ - B4860, T1040, T2080, T4240:
+ register[bit] FMan unit cell-index
+ ============================================================
+ DCFG_CCSR_DEVDISR2[24] 1 0
+ DCFG_CCSR_DEVDISR2[25] 2 1
+ (Second FM available only in T4240)
+
+ DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
+ the specific SoC "Device Configuration/Pin Control" Memory
+ Map.
+
+- reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the offset of the
+ following configuration registers:
+ - BMI configuration registers.
+ - QMI configuration registers.
+ - DMA configuration registers.
+ - FPM configuration registers.
+ - FMan controller configuration registers.
+
+- ranges
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property.
+
+- clocks
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: phandle for the fman input clock.
+
+- clock-names
+ usage: required
+ Value type: <stringlist>
+ Definition: "fmanclk" for the fman input clock.
+
+- interrupts
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A pair of IRQs are specified in this property.
+ The first element is associated with the event interrupts and
+ the second element is associated with the error interrupts.
+
+- fsl,qman-channel-range
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Specifies the range of the available dedicated
+ channels in the FMan. The first cell specifies the beginning
+ of the range and the second cell specifies the number of
+ channels.
+ Further information available at:
+ "Work Queue (WQ) Channel Assignments in the QMan" section
+ in DPAA Reference Manual.
+
+- fsl,qman
+- fsl,bman
+ Usage: required
+ Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt
+
+=============================================================================
+FMan MURAM Node
+
+DESCRIPTION
+
+FMan Internal memory - shared between all the FMan modules.
+It contains data structures that are common and written to or read by
+the modules.
+FMan internal memory is split into the following parts:
+ Packet buffering (Tx/Rx FIFOs)
+ Frames internal context
+
+PROPERTIES
+
+- compatible
+ Usage: required
+ Value type: <stringlist>
+ Definition: Must include "fsl,fman-muram"
+
+- ranges
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property.
+ Specifies the multi-user memory offset and the size within
+ the FMan.
+
+EXAMPLE
+
+muram@0 {
+ compatible = "fsl,fman-muram";
+ ranges = <0 0x000000 0x28000>;
+};
+
+=============================================================================
+FMan Port Node
+
+DESCRIPTION
+
+The Frame Manager (FMan) supports several types of hardware ports:
+ Ethernet receiver (RX)
+ Ethernet transmitter (TX)
+ Offline/Host command (O/H)
+
+PROPERTIES
+
+- compatible
+ Usage: required
+ Value type: <stringlist>
+ Definition: A standard property.
+ Must include one of the following:
+ - "fsl,fman-v2-port-oh" for FManV2 OH ports
+ - "fsl,fman-v2-port-rx" for FManV2 RX ports
+ - "fsl,fman-v2-port-tx" for FManV2 TX ports
+ - "fsl,fman-v3-port-oh" for FManV3 OH ports
+ - "fsl,fman-v3-port-rx" for FManV3 RX ports
+ - "fsl,fman-v3-port-tx" for FManV3 TX ports
+
+- cell-index
+ Usage: required
+ Value type: <u32>
+ Definition: Specifies the hardware port id.
+ Each hardware port on the FMan has its own hardware PortID.
+ Super set of all hardware Port IDs available at FMan Reference
+ Manual under "FMan Hardware Ports in Freescale Devices" table.
+
+ Each hardware port is assigned a 4KB, port-specific page in
+ the FMan hardware port memory region (which is part of the
+ FMan memory map). The first 4 KB in the FMan hardware ports
+ memory region is used for what are called common registers.
+ The subsequent 63 4KB pages are allocated to the hardware
+ ports.
+ The page of a specific port is determined by the cell-index.
+
+- reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: There is one reg region describing the port
+ configuration registers.
+
+- fsl,fman-10g-port
+ Usage: optional
+ Value type: boolean
+ Definition: The default port rate is 1G.
+ If this property exists, the port is s 10G port.
+
+- fsl,fman-best-effort-port
+ Usage: optional
+ Value type: boolean
+ Definition: Can be defined only if 10G-support is set.
+ This property marks a best-effort 10G port (10G port that
+ may not be capable of line rate).
+
+EXAMPLE
+
+port@a8000 {
+ cell-index = <0x28>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xa8000 0x1000>;
+};
+
+port@88000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x88000 0x1000>;
+};
+
+port@81000 {
+ cell-index = <0x1>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x81000 0x1000>;
+};
+
+=============================================================================
+FMan dTSEC/XGEC/mEMAC Node
+
+DESCRIPTION
+
+mEMAC/dTSEC/XGEC are the Ethernet network interfaces
+
+PROPERTIES
+
+- compatible
+ Usage: required
+ Value type: <stringlist>
+ Definition: A standard property.
+ Must include one of the following:
+ - "fsl,fman-dtsec" for dTSEC MAC
+ - "fsl,fman-xgec" for XGEC MAC
+ - "fsl,fman-memac for mEMAC MAC
+
+- cell-index
+ Usage: required
+ Value type: <u32>
+ Definition: Specifies the MAC id.
+
+ The cell-index value may be used by the FMan or the SoC, to
+ identify the MAC unit in the FMan (or SoC) memory map.
+ In the tables below there's a description of the cell-index
+ use, there are two tables, one describes the use of cell-index
+ by the FMan, the second describes the use by the SoC:
+
+ 1. FMan Registers
+
+ FManV2:
+ register[bit] MAC cell-index
+ ============================================================
+ FM_EPI[16] XGEC 8
+ FM_EPI[16+n] dTSECn n-1
+ FM_NPI[11+n] dTSECn n-1
+ n = 1,..,5
+
+ FManV3:
+ register[bit] MAC cell-index
+ ============================================================
+ FM_EPI[16+n] mEMACn n-1
+ FM_EPI[25] mEMAC10 9
+
+ FM_NPI[11+n] mEMACn n-1
+ FM_NPI[10] mEMAC10 9
+ FM_NPI[11] mEMAC9 8
+ n = 1,..8
+
+ FM_EPI and FM_NPI are located in the FMan memory map.
+
+ 2. SoC registers:
+
+ - P2041, P3041, P4080 P5020, P5040:
+ register[bit] FMan MAC cell
+ Unit index
+ ============================================================
+ DCFG_DEVDISR2[7] 1 XGEC 8
+ DCFG_DEVDISR2[7+n] 1 dTSECn n-1
+ DCFG_DEVDISR2[15] 2 XGEC 8
+ DCFG_DEVDISR2[15+n] 2 dTSECn n-1
+ n = 1,..5
+
+ - T1040, T2080, T4240, B4860:
+ register[bit] FMan MAC cell
+ Unit index
+ ============================================================
+ DCFG_CCSR_DEVDISR2[n-1] 1 mEMACn n-1
+ DCFG_CCSR_DEVDISR2[11+n] 2 mEMACn n-1
+ n = 1,..6,9,10
+
+ EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
+ the specific SoC "Device Configuration/Pin Control" Memory
+ Map.
+
+- reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property.
+
+- fsl,fman-ports
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: An array of two phandles - the first references is
+ the FMan RX port and the second is the TX port used by this
+ MAC.
+
+- ptp-timer
+ Usage required
+ Value type: <phandle>
+ Definition: A phandle for 1EEE1588 timer.
+
+- pcsphy-handle
+ Usage required for "fsl,fman-memac" MACs
+ Value type: <phandle>
+ Definition: A phandle for pcsphy.
+
+- tbi-handle
+ Usage required for "fsl,fman-dtsec" MACs
+ Value type: <phandle>
+ Definition: A phandle for tbiphy.
+
+EXAMPLE
+
+fman1_tx28: port@a8000 {
+ cell-index = <0x28>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xa8000 0x1000>;
+};
+
+fman1_rx8: port@88000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x88000 0x1000>;
+};
+
+ptp-timer: ptp_timer@fe000 {
+ compatible = "fsl,fman-ptp-timer";
+ reg = <0xfe000 0x1000>;
+};
+
+ethernet@e0000 {
+ compatible = "fsl,fman-dtsec";
+ cell-index = <0>;
+ reg = <0xe0000 0x1000>;
+ fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
+ ptp-timer = <&ptp-timer>;
+ tbi-handle = <&tbi0>;
+};
+
+============================================================================
+FMan IEEE 1588 Node
+
+DESCRIPTION
+
+The FMan interface to support IEEE 1588
+
+
+PROPERTIES
+
+- compatible
+ Usage: required
+ Value type: <stringlist>
+ Definition: A standard property.
+ Must include "fsl,fman-ptp-timer".
+
+- reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property.
+
+EXAMPLE
+
+ptp-timer@fe000 {
+ compatible = "fsl,fman-ptp-timer";
+ reg = <0xfe000 0x1000>;
+};
+
+=============================================================================
+FMan MDIO Node
+
+DESCRIPTION
+
+The MDIO is a bus to which the PHY devices are connected.
+
+PROPERTIES
+
+- compatible
+ Usage: required
+ Value type: <stringlist>
+ Definition: A standard property.
+ Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2.
+ Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2.
+ Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from
+ FMan v3.
+
+- reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property.
+
+- bus-frequency
+ Usage: optional
+ Value type: <u32>
+ Definition: Specifies the external MDIO bus clock speed to
+ be used, if different from the standard 2.5 MHz.
+ This may be due to the standard speed being unsupported (e.g.
+ due to a hardware problem), or to advertise that all relevant
+ components in the system support a faster speed.
+
+- interrupts
+ Usage: required for external MDIO
+ Value type: <prop-encoded-array>
+ Definition: Event interrupt of external MDIO controller.
+
+- fsl,fman-internal-mdio
+ Usage: required for internal MDIO
+ Value type: boolean
+ Definition: Fman has internal MDIO for internal PCS(Physical
+ Coding Sublayer) PHYs and external MDIO for external PHYs.
+ The settings and programming routines for internal/external
+ MDIO are different. Must be included for internal MDIO.
+
+For internal PHY device on internal mdio bus, a PHY node should be created.
+See the definition of the PHY node in booting-without-of.txt for an
+example of how to define a PHY (Internal PHY has no interrupt line).
+- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
+- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY,
+ PCS PHY addr must be '0'.
+
+EXAMPLE
+
+Example for FMan v2 external MDIO:
+
+mdio@f1000 {
+ compatible = "fsl,fman-xmdio";
+ reg = <0xf1000 0x1000>;
+ interrupts = <101 2 0 0>;
+};
+
+Example for FMan v2 internal MDIO:
+
+mdio@e3120 {
+ compatible = "fsl,fman-mdio";
+ reg = <0xe3120 0xee0>;
+ fsl,fman-internal-mdio;
+
+ tbi1: tbi-phy@8 {
+ reg = <0x8>;
+ device_type = "tbi-phy";
+ };
+};
+
+Example for FMan v3 internal MDIO:
+
+mdio@f1000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0xf1000 0x1000>;
+ fsl,fman-internal-mdio;
+
+ pcsphy6: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+};
+
+=============================================================================
+Example
+
+fman@400000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ compatible = "fsl,fman"
+ ranges = <0 0x400000 0x100000>;
+ reg = <0x400000 0x100000>;
+ clocks = <&fman_clk>;
+ clock-names = "fmanclk";
+ interrupts = <
+ 96 2 0 0
+ 16 2 1 1>;
+ fsl,qman-channel-range = <0x40 0xc>;
+
+ muram@0 {
+ compatible = "fsl,fman-muram";
+ reg = <0x0 0x28000>;
+ };
+
+ port@81000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x81000 0x1000>;
+ };
+
+ port@82000 {
+ cell-index = <2>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x82000 0x1000>;
+ };
+
+ port@83000 {
+ cell-index = <3>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x83000 0x1000>;
+ };
+
+ port@84000 {
+ cell-index = <4>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x84000 0x1000>;
+ };
+
+ port@85000 {
+ cell-index = <5>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x85000 0x1000>;
+ };
+
+ port@86000 {
+ cell-index = <6>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x86000 0x1000>;
+ };
+
+ fman1_rx_0x8: port@88000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x88000 0x1000>;
+ };
+
+ fman1_rx_0x9: port@89000 {
+ cell-index = <0x9>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x89000 0x1000>;
+ };
+
+ fman1_rx_0xa: port@8a000 {
+ cell-index = <0xa>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x8a000 0x1000>;
+ };
+
+ fman1_rx_0xb: port@8b000 {
+ cell-index = <0xb>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x8b000 0x1000>;
+ };
+
+ fman1_rx_0xc: port@8c000 {
+ cell-index = <0xc>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x8c000 0x1000>;
+ };
+
+ fman1_rx_0x10: port@90000 {
+ cell-index = <0x10>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x90000 0x1000>;
+ };
+
+ fman1_tx_0x28: port@a8000 {
+ cell-index = <0x28>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xa8000 0x1000>;
+ };
+
+ fman1_tx_0x29: port@a9000 {
+ cell-index = <0x29>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xa9000 0x1000>;
+ };
+
+ fman1_tx_0x2a: port@aa000 {
+ cell-index = <0x2a>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xaa000 0x1000>;
+ };
+
+ fman1_tx_0x2b: port@ab000 {
+ cell-index = <0x2b>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xab000 0x1000>;
+ };
+
+ fman1_tx_0x2c: port@ac0000 {
+ cell-index = <0x2c>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xac000 0x1000>;
+ };
+
+ fman1_tx_0x30: port@b0000 {
+ cell-index = <0x30>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xb0000 0x1000>;
+ };
+
+ ethernet@e0000 {
+ compatible = "fsl,fman-dtsec";
+ cell-index = <0>;
+ reg = <0xe0000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>;
+ tbi-handle = <&tbi5>;
+ };
+
+ ethernet@e2000 {
+ compatible = "fsl,fman-dtsec";
+ cell-index = <1>;
+ reg = <0xe2000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0x9 &fman1_tx_0x29>;
+ tbi-handle = <&tbi6>;
+ };
+
+ ethernet@e4000 {
+ compatible = "fsl,fman-dtsec";
+ cell-index = <2>;
+ reg = <0xe4000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0xa &fman1_tx_0x2a>;
+ tbi-handle = <&tbi7>;
+ };
+
+ ethernet@e6000 {
+ compatible = "fsl,fman-dtsec";
+ cell-index = <3>;
+ reg = <0xe6000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0xb &fman1_tx_0x2b>;
+ tbi-handle = <&tbi8>;
+ };
+
+ ethernet@e8000 {
+ compatible = "fsl,fman-dtsec";
+ cell-index = <4>;
+ reg = <0xf0000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0xc &fman1_tx_0x2c>;
+ tbi-handle = <&tbi9>;
+
+ ethernet@f0000 {
+ cell-index = <8>;
+ compatible = "fsl,fman-xgec";
+ reg = <0xf0000 0x1000>;
+ fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
+ };
+
+ ptp-timer@fe000 {
+ compatible = "fsl,fman-ptp-timer";
+ reg = <0xfe000 0x1000>;
+ };
+
+ mdio@f1000 {
+ compatible = "fsl,fman-xmdio";
+ reg = <0xf1000 0x1000>;
+ interrupts = <101 2 0 0>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
deleted file mode 100644
index df873d1..0000000
--- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
+++ /dev/null
@@ -1,657 +0,0 @@
-=============================================================================
-Freescale Frame Manager Device Bindings
-
-CONTENTS
- - FMan Node
- - FMan Port Node
- - FMan MURAM Node
- - FMan dTSEC/XGEC/mEMAC Node
- - FMan IEEE 1588 Node
- - FMan MDIO Node
- - Example
-
-=============================================================================
-FMan Node
-
-DESCRIPTION
-
-Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs,
-etc.) the FMan node will have child nodes for each of them.
-
-PROPERTIES
-
-- compatible
- Usage: required
- Value type: <stringlist>
- Definition: Must include "fsl,fman"
- FMan version can be determined via FM_IP_REV_1 register in the
- FMan block. The offset is 0xc4 from the beginning of the
- Frame Processing Manager memory map (0xc3000 from the
- beginning of the FMan node).
-
-- cell-index
- Usage: required
- Value type: <u32>
- Definition: Specifies the index of the FMan unit.
-
- The cell-index value may be used by the SoC, to identify the
- FMan unit in the SoC memory map. In the table below,
- there's a description of the cell-index use in each SoC:
-
- - P1023:
- register[bit] FMan unit cell-index
- ============================================================
- DEVDISR[1] 1 0
-
- - P2041, P3041, P4080 P5020, P5040:
- register[bit] FMan unit cell-index
- ============================================================
- DCFG_DEVDISR2[6] 1 0
- DCFG_DEVDISR2[14] 2 1
- (Second FM available only in P4080 and P5040)
-
- - B4860, T1040, T2080, T4240:
- register[bit] FMan unit cell-index
- ============================================================
- DCFG_CCSR_DEVDISR2[24] 1 0
- DCFG_CCSR_DEVDISR2[25] 2 1
- (Second FM available only in T4240)
-
- DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
- the specific SoC "Device Configuration/Pin Control" Memory
- Map.
-
-- reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property. Specifies the offset of the
- following configuration registers:
- - BMI configuration registers.
- - QMI configuration registers.
- - DMA configuration registers.
- - FPM configuration registers.
- - FMan controller configuration registers.
-
-- ranges
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property.
-
-- clocks
- Usage: required
- Value type: <prop-encoded-array>
- Definition: phandle for the fman input clock.
-
-- clock-names
- usage: required
- Value type: <stringlist>
- Definition: "fmanclk" for the fman input clock.
-
-- interrupts
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A pair of IRQs are specified in this property.
- The first element is associated with the event interrupts and
- the second element is associated with the error interrupts.
-
-- fsl,qman-channel-range
- Usage: required
- Value type: <prop-encoded-array>
- Definition: Specifies the range of the available dedicated
- channels in the FMan. The first cell specifies the beginning
- of the range and the second cell specifies the number of
- channels.
- Further information available at:
- "Work Queue (WQ) Channel Assignments in the QMan" section
- in DPAA Reference Manual.
-
-- fsl,qman
-- fsl,bman
- Usage: required
- Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt
-
-=============================================================================
-FMan MURAM Node
-
-DESCRIPTION
-
-FMan Internal memory - shared between all the FMan modules.
-It contains data structures that are common and written to or read by
-the modules.
-FMan internal memory is split into the following parts:
- Packet buffering (Tx/Rx FIFOs)
- Frames internal context
-
-PROPERTIES
-
-- compatible
- Usage: required
- Value type: <stringlist>
- Definition: Must include "fsl,fman-muram"
-
-- ranges
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property.
- Specifies the multi-user memory offset and the size within
- the FMan.
-
-EXAMPLE
-
-muram@0 {
- compatible = "fsl,fman-muram";
- ranges = <0 0x000000 0x28000>;
-};
-
-=============================================================================
-FMan Port Node
-
-DESCRIPTION
-
-The Frame Manager (FMan) supports several types of hardware ports:
- Ethernet receiver (RX)
- Ethernet transmitter (TX)
- Offline/Host command (O/H)
-
-PROPERTIES
-
-- compatible
- Usage: required
- Value type: <stringlist>
- Definition: A standard property.
- Must include one of the following:
- - "fsl,fman-v2-port-oh" for FManV2 OH ports
- - "fsl,fman-v2-port-rx" for FManV2 RX ports
- - "fsl,fman-v2-port-tx" for FManV2 TX ports
- - "fsl,fman-v3-port-oh" for FManV3 OH ports
- - "fsl,fman-v3-port-rx" for FManV3 RX ports
- - "fsl,fman-v3-port-tx" for FManV3 TX ports
-
-- cell-index
- Usage: required
- Value type: <u32>
- Definition: Specifies the hardware port id.
- Each hardware port on the FMan has its own hardware PortID.
- Super set of all hardware Port IDs available at FMan Reference
- Manual under "FMan Hardware Ports in Freescale Devices" table.
-
- Each hardware port is assigned a 4KB, port-specific page in
- the FMan hardware port memory region (which is part of the
- FMan memory map). The first 4 KB in the FMan hardware ports
- memory region is used for what are called common registers.
- The subsequent 63 4KB pages are allocated to the hardware
- ports.
- The page of a specific port is determined by the cell-index.
-
-- reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: There is one reg region describing the port
- configuration registers.
-
-- fsl,fman-10g-port
- Usage: optional
- Value type: boolean
- Definition: The default port rate is 1G.
- If this property exists, the port is s 10G port.
-
-- fsl,fman-best-effort-port
- Usage: optional
- Value type: boolean
- Definition: Can be defined only if 10G-support is set.
- This property marks a best-effort 10G port (10G port that
- may not be capable of line rate).
-
-EXAMPLE
-
-port@a8000 {
- cell-index = <0x28>;
- compatible = "fsl,fman-v2-port-tx";
- reg = <0xa8000 0x1000>;
-};
-
-port@88000 {
- cell-index = <0x8>;
- compatible = "fsl,fman-v2-port-rx";
- reg = <0x88000 0x1000>;
-};
-
-port@81000 {
- cell-index = <0x1>;
- compatible = "fsl,fman-v2-port-oh";
- reg = <0x81000 0x1000>;
-};
-
-=============================================================================
-FMan dTSEC/XGEC/mEMAC Node
-
-DESCRIPTION
-
-mEMAC/dTSEC/XGEC are the Ethernet network interfaces
-
-PROPERTIES
-
-- compatible
- Usage: required
- Value type: <stringlist>
- Definition: A standard property.
- Must include one of the following:
- - "fsl,fman-dtsec" for dTSEC MAC
- - "fsl,fman-xgec" for XGEC MAC
- - "fsl,fman-memac for mEMAC MAC
-
-- cell-index
- Usage: required
- Value type: <u32>
- Definition: Specifies the MAC id.
-
- The cell-index value may be used by the FMan or the SoC, to
- identify the MAC unit in the FMan (or SoC) memory map.
- In the tables below there's a description of the cell-index
- use, there are two tables, one describes the use of cell-index
- by the FMan, the second describes the use by the SoC:
-
- 1. FMan Registers
-
- FManV2:
- register[bit] MAC cell-index
- ============================================================
- FM_EPI[16] XGEC 8
- FM_EPI[16+n] dTSECn n-1
- FM_NPI[11+n] dTSECn n-1
- n = 1,..,5
-
- FManV3:
- register[bit] MAC cell-index
- ============================================================
- FM_EPI[16+n] mEMACn n-1
- FM_EPI[25] mEMAC10 9
-
- FM_NPI[11+n] mEMACn n-1
- FM_NPI[10] mEMAC10 9
- FM_NPI[11] mEMAC9 8
- n = 1,..8
-
- FM_EPI and FM_NPI are located in the FMan memory map.
-
- 2. SoC registers:
-
- - P2041, P3041, P4080 P5020, P5040:
- register[bit] FMan MAC cell
- Unit index
- ============================================================
- DCFG_DEVDISR2[7] 1 XGEC 8
- DCFG_DEVDISR2[7+n] 1 dTSECn n-1
- DCFG_DEVDISR2[15] 2 XGEC 8
- DCFG_DEVDISR2[15+n] 2 dTSECn n-1
- n = 1,..5
-
- - T1040, T2080, T4240, B4860:
- register[bit] FMan MAC cell
- Unit index
- ============================================================
- DCFG_CCSR_DEVDISR2[n-1] 1 mEMACn n-1
- DCFG_CCSR_DEVDISR2[11+n] 2 mEMACn n-1
- n = 1,..6,9,10
-
- EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
- the specific SoC "Device Configuration/Pin Control" Memory
- Map.
-
-- reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property.
-
-- fsl,fman-ports
- Usage: required
- Value type: <prop-encoded-array>
- Definition: An array of two phandles - the first references is
- the FMan RX port and the second is the TX port used by this
- MAC.
-
-- ptp-timer
- Usage required
- Value type: <phandle>
- Definition: A phandle for 1EEE1588 timer.
-
-- pcsphy-handle
- Usage required for "fsl,fman-memac" MACs
- Value type: <phandle>
- Definition: A phandle for pcsphy.
-
-- tbi-handle
- Usage required for "fsl,fman-dtsec" MACs
- Value type: <phandle>
- Definition: A phandle for tbiphy.
-
-EXAMPLE
-
-fman1_tx28: port@a8000 {
- cell-index = <0x28>;
- compatible = "fsl,fman-v2-port-tx";
- reg = <0xa8000 0x1000>;
-};
-
-fman1_rx8: port@88000 {
- cell-index = <0x8>;
- compatible = "fsl,fman-v2-port-rx";
- reg = <0x88000 0x1000>;
-};
-
-ptp-timer: ptp_timer@fe000 {
- compatible = "fsl,fman-ptp-timer";
- reg = <0xfe000 0x1000>;
-};
-
-ethernet@e0000 {
- compatible = "fsl,fman-dtsec";
- cell-index = <0>;
- reg = <0xe0000 0x1000>;
- fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
- ptp-timer = <&ptp-timer>;
- tbi-handle = <&tbi0>;
-};
-
-============================================================================
-FMan IEEE 1588 Node
-
-DESCRIPTION
-
-The FMan interface to support IEEE 1588
-
-
-PROPERTIES
-
-- compatible
- Usage: required
- Value type: <stringlist>
- Definition: A standard property.
- Must include "fsl,fman-ptp-timer".
-
-- reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property.
-
-EXAMPLE
-
-ptp-timer@fe000 {
- compatible = "fsl,fman-ptp-timer";
- reg = <0xfe000 0x1000>;
-};
-
-=============================================================================
-FMan MDIO Node
-
-DESCRIPTION
-
-The MDIO is a bus to which the PHY devices are connected.
-
-PROPERTIES
-
-- compatible
- Usage: required
- Value type: <stringlist>
- Definition: A standard property.
- Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2.
- Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2.
- Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from
- FMan v3.
-
-- reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property.
-
-- bus-frequency
- Usage: optional
- Value type: <u32>
- Definition: Specifies the external MDIO bus clock speed to
- be used, if different from the standard 2.5 MHz.
- This may be due to the standard speed being unsupported (e.g.
- due to a hardware problem), or to advertise that all relevant
- components in the system support a faster speed.
-
-- interrupts
- Usage: required for external MDIO
- Value type: <prop-encoded-array>
- Definition: Event interrupt of external MDIO controller.
-
-- fsl,fman-internal-mdio
- Usage: required for internal MDIO
- Value type: boolean
- Definition: Fman has internal MDIO for internal PCS(Physical
- Coding Sublayer) PHYs and external MDIO for external PHYs.
- The settings and programming routines for internal/external
- MDIO are different. Must be included for internal MDIO.
-
-For internal PHY device on internal mdio bus, a PHY node should be created.
-See the definition of the PHY node in booting-without-of.txt for an
-example of how to define a PHY (Internal PHY has no interrupt line).
-- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
-- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY,
- PCS PHY addr must be '0'.
-
-EXAMPLE
-
-Example for FMan v2 external MDIO:
-
-mdio@f1000 {
- compatible = "fsl,fman-xmdio";
- reg = <0xf1000 0x1000>;
- interrupts = <101 2 0 0>;
-};
-
-Example for FMan v2 internal MDIO:
-
-mdio@e3120 {
- compatible = "fsl,fman-mdio";
- reg = <0xe3120 0xee0>;
- fsl,fman-internal-mdio;
-
- tbi1: tbi-phy@8 {
- reg = <0x8>;
- device_type = "tbi-phy";
- };
-};
-
-Example for FMan v3 internal MDIO:
-
-mdio@f1000 {
- compatible = "fsl,fman-memac-mdio";
- reg = <0xf1000 0x1000>;
- fsl,fman-internal-mdio;
-
- pcsphy6: ethernet-phy@0 {
- reg = <0x0>;
- };
-};
-
-=============================================================================
-Example
-
-fman@400000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- compatible = "fsl,fman"
- ranges = <0 0x400000 0x100000>;
- reg = <0x400000 0x100000>;
- clocks = <&fman_clk>;
- clock-names = "fmanclk";
- interrupts = <
- 96 2 0 0
- 16 2 1 1>;
- fsl,qman-channel-range = <0x40 0xc>;
-
- muram@0 {
- compatible = "fsl,fman-muram";
- reg = <0x0 0x28000>;
- };
-
- port@81000 {
- cell-index = <1>;
- compatible = "fsl,fman-v2-port-oh";
- reg = <0x81000 0x1000>;
- };
-
- port@82000 {
- cell-index = <2>;
- compatible = "fsl,fman-v2-port-oh";
- reg = <0x82000 0x1000>;
- };
-
- port@83000 {
- cell-index = <3>;
- compatible = "fsl,fman-v2-port-oh";
- reg = <0x83000 0x1000>;
- };
-
- port@84000 {
- cell-index = <4>;
- compatible = "fsl,fman-v2-port-oh";
- reg = <0x84000 0x1000>;
- };
-
- port@85000 {
- cell-index = <5>;
- compatible = "fsl,fman-v2-port-oh";
- reg = <0x85000 0x1000>;
- };
-
- port@86000 {
- cell-index = <6>;
- compatible = "fsl,fman-v2-port-oh";
- reg = <0x86000 0x1000>;
- };
-
- fman1_rx_0x8: port@88000 {
- cell-index = <0x8>;
- compatible = "fsl,fman-v2-port-rx";
- reg = <0x88000 0x1000>;
- };
-
- fman1_rx_0x9: port@89000 {
- cell-index = <0x9>;
- compatible = "fsl,fman-v2-port-rx";
- reg = <0x89000 0x1000>;
- };
-
- fman1_rx_0xa: port@8a000 {
- cell-index = <0xa>;
- compatible = "fsl,fman-v2-port-rx";
- reg = <0x8a000 0x1000>;
- };
-
- fman1_rx_0xb: port@8b000 {
- cell-index = <0xb>;
- compatible = "fsl,fman-v2-port-rx";
- reg = <0x8b000 0x1000>;
- };
-
- fman1_rx_0xc: port@8c000 {
- cell-index = <0xc>;
- compatible = "fsl,fman-v2-port-rx";
- reg = <0x8c000 0x1000>;
- };
-
- fman1_rx_0x10: port@90000 {
- cell-index = <0x10>;
- compatible = "fsl,fman-v2-port-rx";
- reg = <0x90000 0x1000>;
- };
-
- fman1_tx_0x28: port@a8000 {
- cell-index = <0x28>;
- compatible = "fsl,fman-v2-port-tx";
- reg = <0xa8000 0x1000>;
- };
-
- fman1_tx_0x29: port@a9000 {
- cell-index = <0x29>;
- compatible = "fsl,fman-v2-port-tx";
- reg = <0xa9000 0x1000>;
- };
-
- fman1_tx_0x2a: port@aa000 {
- cell-index = <0x2a>;
- compatible = "fsl,fman-v2-port-tx";
- reg = <0xaa000 0x1000>;
- };
-
- fman1_tx_0x2b: port@ab000 {
- cell-index = <0x2b>;
- compatible = "fsl,fman-v2-port-tx";
- reg = <0xab000 0x1000>;
- };
-
- fman1_tx_0x2c: port@ac0000 {
- cell-index = <0x2c>;
- compatible = "fsl,fman-v2-port-tx";
- reg = <0xac000 0x1000>;
- };
-
- fman1_tx_0x30: port@b0000 {
- cell-index = <0x30>;
- compatible = "fsl,fman-v2-port-tx";
- reg = <0xb0000 0x1000>;
- };
-
- ethernet@e0000 {
- compatible = "fsl,fman-dtsec";
- cell-index = <0>;
- reg = <0xe0000 0x1000>;
- fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>;
- tbi-handle = <&tbi5>;
- };
-
- ethernet@e2000 {
- compatible = "fsl,fman-dtsec";
- cell-index = <1>;
- reg = <0xe2000 0x1000>;
- fsl,fman-ports = <&fman1_rx_0x9 &fman1_tx_0x29>;
- tbi-handle = <&tbi6>;
- };
-
- ethernet@e4000 {
- compatible = "fsl,fman-dtsec";
- cell-index = <2>;
- reg = <0xe4000 0x1000>;
- fsl,fman-ports = <&fman1_rx_0xa &fman1_tx_0x2a>;
- tbi-handle = <&tbi7>;
- };
-
- ethernet@e6000 {
- compatible = "fsl,fman-dtsec";
- cell-index = <3>;
- reg = <0xe6000 0x1000>;
- fsl,fman-ports = <&fman1_rx_0xb &fman1_tx_0x2b>;
- tbi-handle = <&tbi8>;
- };
-
- ethernet@e8000 {
- compatible = "fsl,fman-dtsec";
- cell-index = <4>;
- reg = <0xf0000 0x1000>;
- fsl,fman-ports = <&fman1_rx_0xc &fman1_tx_0x2c>;
- tbi-handle = <&tbi9>;
-
- ethernet@f0000 {
- cell-index = <8>;
- compatible = "fsl,fman-xgec";
- reg = <0xf0000 0x1000>;
- fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
- };
-
- ptp-timer@fe000 {
- compatible = "fsl,fman-ptp-timer";
- reg = <0xfe000 0x1000>;
- };
-
- mdio@f1000 {
- compatible = "fsl,fman-xmdio";
- reg = <0xf1000 0x1000>;
- interrupts = <101 2 0 0>;
- };
-};
--
2.1.0