Re: [PATCH V2] pwm: tegra: Set maximum pwm clock source per SoC tapeout

[Laxman Dewangan]

On Tuesday 02 May 2017 11:13 PM, Laxman Dewangan wrote:
> On Tuesday 02 May 2017 08:53 PM, Jon Hunter wrote:
> > On 02/05/17 15:05, Laxman Dewangan wrote:
> > > The PWM hardware IP is taped-out with different maximum frequency
> > > on different SoCs.
> > >
> > >  From HW team:
> > >     Before Tegra186, it is 38.4MHz.
> > >     In Tegra186, it is 102MHz.
> > >
> > > Add support to limit the clock source frequency to the maximum IP
> > > supported frequency. Provide these values via SoC chipdata.
> > >
> > > Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
> > >
> > > ---
> > > Changes from V1:
> > > - Set the 48MHz maximum frequency for Tegra210 and earlier.
> > I think that your changelog needs to be updated, because it still says
> > 38.4MHz and not 48MHz.
>
> Oops, thanks for pointing.
>
> Thierry,
> Do I need to recycle the patch or can be corrected when applying?
> If there is any further review comment in code then I will recycle and 
> correct it.

Thierry,
Can you please review?