[PATCH v2 42/53] docs: remove DocBook from the building system

From: Mauro Carvalho Chehab
Date: Tue May 16 2017 - 08:21:55 EST

Next message: Mauro Carvalho Chehab: "[PATCH v2 43/53] docs: update old references for DocBook from the documentation"
Previous message: Mauro Carvalho Chehab: "[PATCH v2 37/53] docs-rst: convert mtdnand book to ReST"
In reply to: Boris Brezillon: "Re: [PATCH v2 37/53] docs-rst: convert mtdnand book to ReST"
Next in thread: Mauro Carvalho Chehab: "[PATCH v2 43/53] docs: update old references for DocBook from the documentation"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Now that we don't have any DocBook anymore, remove it from
the building system.

Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
---
Documentation/00-INDEX | 4 --
Documentation/DocBook/.gitignore | 17 -----
Documentation/DocBook/Makefile | 1 -
Documentation/DocBook/stylesheet.xsl | 11 ---
Documentation/Makefile | 125 +++++++++++++++++++++++++++++++++
Documentation/Makefile.sphinx | 130 -----------------------------------
Documentation/doc-guide/docbook.rst | 90 ------------------------
Makefile | 11 ++-
scripts/Makefile | 9 +--
scripts/check-lc_ctype.c | 11 ---
10 files changed, 132 insertions(+), 277 deletions(-)
delete mode 100644 Documentation/DocBook/.gitignore
delete mode 100644 Documentation/DocBook/Makefile
delete mode 100644 Documentation/DocBook/stylesheet.xsl
delete mode 100644 Documentation/Makefile.sphinx
delete mode 100644 Documentation/doc-guide/docbook.rst
delete mode 100644 scripts/check-lc_ctype.c

diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 8c2a66e176b9..d0165461b024 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -24,8 +24,6 @@ DMA-ISA-LPC.txt
- How to do DMA with ISA (and LPC) devices.
DMA-attributes.txt
- listing of the various possible attributes a DMA region can have
-DocBook/
- - directory with DocBook templates etc. for kernel documentation.
EDID/
- directory with info on customizing EDID for broken gfx/displays.
IPMI.txt
@@ -40,8 +38,6 @@ Intel-IOMMU.txt
- basic info on the Intel IOMMU virtualization support.
Makefile
- It's not of interest for those who aren't touching the build system.
-Makefile.sphinx
- - It's not of interest for those who aren't touching the build system.
PCI/
- info related to PCI drivers.
RCU/
diff --git a/Documentation/DocBook/.gitignore b/Documentation/DocBook/.gitignore
deleted file mode 100644
index e05da3f7aa21..000000000000
--- a/Documentation/DocBook/.gitignore
+++ /dev/null
@@ -1,17 +0,0 @@
-*.xml
-*.ps
-*.pdf
-*.html
-*.9.gz
-*.9
-*.aux
-*.dvi
-*.log
-*.out
-*.png
-*.gif
-*.svg
-*.proc
-*.db
-media-indices.tmpl
-media-entities.tmpl
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
deleted file mode 100644
index 8b137891791f..000000000000
--- a/Documentation/DocBook/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-
diff --git a/Documentation/DocBook/stylesheet.xsl b/Documentation/DocBook/stylesheet.xsl
deleted file mode 100644
index 3bf4ecf3d760..000000000000
--- a/Documentation/DocBook/stylesheet.xsl
+++ /dev/null
@@ -1,11 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<stylesheet xmlns="http://www.w3.org/1999/XSL/Transform"; version="1.0">
-<param name="chunk.quietly">1</param>
-<param name="funcsynopsis.style">ansi</param>
-<param name="funcsynopsis.tabular.threshold">80</param>
-<param name="callout.graphics">0</param>
-
-<param name="generate.consistent.ids">1</param>
-<param name="generate.section.toc.level">2</param>
-<param name="use.id.as.filename">1</param>
-</stylesheet>
diff --git a/Documentation/Makefile b/Documentation/Makefile
index c2a469112c37..a42320385df3 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -1 +1,126 @@
+# -*- makefile -*-
+# Makefile for Sphinx documentation
+#
+
subdir-y :=
+
+# You can set these variables from the command line.
+SPHINXBUILD = sphinx-build
+SPHINXOPTS =
+SPHINXDIRS = .
+_SPHINXDIRS = $(patsubst $(srctree)/Documentation/%/conf.py,%,$(wildcard $(srctree)/Documentation/*/conf.py))
+SPHINX_CONF = conf.py
+PAPER =
+BUILDDIR = $(obj)/output
+PDFLATEX = xelatex
+LATEXOPTS = -interaction=batchmode
+
+# User-friendly check for sphinx-build
+HAVE_SPHINX := $(shell if which $(SPHINXBUILD) >/dev/null 2>&1; then echo 1; else echo 0; fi)
+
+ifeq ($(HAVE_SPHINX),0)
+
+.DEFAULT:
+ $(warning The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed and in PATH, or set the SPHINXBUILD make variable to point to the full path of the '$(SPHINXBUILD)' executable.)
+ @echo " SKIP Sphinx $@ target."
+
+else # HAVE_SPHINX
+
+# User-friendly check for pdflatex
+HAVE_PDFLATEX := $(shell if which $(PDFLATEX) >/dev/null 2>&1; then echo 1; else echo 0; fi)
+
+# Internal variables.
+PAPEROPT_a4 = -D latex_paper_size=a4
+PAPEROPT_letter = -D latex_paper_size=letter
+KERNELDOC = $(srctree)/scripts/kernel-doc
+KERNELDOC_CONF = -D kerneldoc_srctree=$(srctree) -D kerneldoc_bin=$(KERNELDOC)
+ALLSPHINXOPTS = $(KERNELDOC_CONF) $(PAPEROPT_$(PAPER)) $(SPHINXOPTS)
+# the i18n builder cannot share the environment and doctrees with the others
+I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+
+# commands; the 'cmd' from scripts/Kbuild.include is not *loopable*
+loop_cmd = $(echo-cmd) $(cmd_$(1)) || exit;
+
+# $2 sphinx builder e.g. "html"
+# $3 name of the build subfolder / e.g. "media", used as:
+# * dest folder relative to $(BUILDDIR) and
+# * cache folder relative to $(BUILDDIR)/.doctrees
+# $4 dest subfolder e.g. "man" for man pages at media/man
+# $5 reST source folder relative to $(srctree)/$(src),
+# e.g. "media" for the linux-tv book-set at ./Documentation/media
+
+quiet_cmd_sphinx = SPHINX $@ --> file://$(abspath $(BUILDDIR)/$3/$4)
+ cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media $2 && \
+ PYTHONDONTWRITEBYTECODE=1 \
+ BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(srctree)/$(src)/$5/$(SPHINX_CONF)) \
+ $(SPHINXBUILD) \
+ -b $2 \
+ -c $(abspath $(srctree)/$(src)) \
+ -d $(abspath $(BUILDDIR)/.doctrees/$3) \
+ -D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) \
+ $(ALLSPHINXOPTS) \
+ $(abspath $(srctree)/$(src)/$5) \
+ $(abspath $(BUILDDIR)/$3/$4)
+
+htmldocs:
+ @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
+
+linkcheckdocs:
+ @$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,linkcheck,$(var),,$(var)))
+
+latexdocs:
+ @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,latex,$(var),latex,$(var)))
+
+ifeq ($(HAVE_PDFLATEX),0)
+
+pdfdocs:
+ $(warning The '$(PDFLATEX)' command was not found. Make sure you have it installed and in PATH to produce PDF output.)
+ @echo " SKIP Sphinx $@ target."
+
+else # HAVE_PDFLATEX
+
+pdfdocs: latexdocs
+ $(foreach var,$(SPHINXDIRS), $(MAKE) PDFLATEX=$(PDFLATEX) LATEXOPTS="$(LATEXOPTS)" -C $(BUILDDIR)/$(var)/latex || exit;)
+
+endif # HAVE_PDFLATEX
+
+epubdocs:
+ @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,epub,$(var),epub,$(var)))
+
+xmldocs:
+ @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,xml,$(var),xml,$(var)))
+
+endif # HAVE_SPHINX
+
+# The following targets are independent of HAVE_SPHINX, and the rules should
+# work or silently pass without Sphinx.
+
+# no-ops for the Sphinx toolchain
+sgmldocs:
+ @:
+psdocs:
+ @:
+mandocs:
+ @:
+installmandocs:
+ @:
+
+cleandocs:
+ $(Q)rm -rf $(BUILDDIR)
+ $(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media clean
+
+dochelp:
+ @echo ' Linux kernel internal documentation in different formats from ReST:'
+ @echo ' htmldocs - HTML'
+ @echo ' latexdocs - LaTeX'
+ @echo ' pdfdocs - PDF'
+ @echo ' epubdocs - EPUB'
+ @echo ' xmldocs - XML'
+ @echo ' linkcheckdocs - check for broken external links (will connect to external hosts)'
+ @echo ' cleandocs - clean all generated files'
+ @echo
+ @echo ' make SPHINXDIRS="s1 s2" [target] Generate only docs of folder s1, s2'
+ @echo ' valid values for SPHINXDIRS are: $(_SPHINXDIRS)'
+ @echo
+ @echo ' make SPHINX_CONF={conf-file} [target] use *additional* sphinx-build'
+ @echo ' configuration. This is e.g. useful to build with nit-picking config.'
diff --git a/Documentation/Makefile.sphinx b/Documentation/Makefile.sphinx
deleted file mode 100644
index bcf529f6cf9b..000000000000
--- a/Documentation/Makefile.sphinx
+++ /dev/null
@@ -1,130 +0,0 @@
-# -*- makefile -*-
-# Makefile for Sphinx documentation
-#
-
-# You can set these variables from the command line.
-SPHINXBUILD = sphinx-build
-SPHINXOPTS =
-SPHINXDIRS = .
-_SPHINXDIRS = $(patsubst $(srctree)/Documentation/%/conf.py,%,$(wildcard $(srctree)/Documentation/*/conf.py))
-SPHINX_CONF = conf.py
-PAPER =
-BUILDDIR = $(obj)/output
-PDFLATEX = xelatex
-LATEXOPTS = -interaction=batchmode
-
-# User-friendly check for sphinx-build
-HAVE_SPHINX := $(shell if which $(SPHINXBUILD) >/dev/null 2>&1; then echo 1; else echo 0; fi)
-
-ifeq ($(HAVE_SPHINX),0)
-
-.DEFAULT:
- $(warning The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed and in PATH, or set the SPHINXBUILD make variable to point to the full path of the '$(SPHINXBUILD)' executable.)
- @echo " SKIP Sphinx $@ target."
-
-else ifneq ($(DOCBOOKS),)
-
-# Skip Sphinx build if the user explicitly requested DOCBOOKS.
-.DEFAULT:
- @echo " SKIP Sphinx $@ target (DOCBOOKS specified)."
-
-else # HAVE_SPHINX
-
-# User-friendly check for pdflatex
-HAVE_PDFLATEX := $(shell if which $(PDFLATEX) >/dev/null 2>&1; then echo 1; else echo 0; fi)
-
-# Internal variables.
-PAPEROPT_a4 = -D latex_paper_size=a4
-PAPEROPT_letter = -D latex_paper_size=letter
-KERNELDOC = $(srctree)/scripts/kernel-doc
-KERNELDOC_CONF = -D kerneldoc_srctree=$(srctree) -D kerneldoc_bin=$(KERNELDOC)
-ALLSPHINXOPTS = $(KERNELDOC_CONF) $(PAPEROPT_$(PAPER)) $(SPHINXOPTS)
-# the i18n builder cannot share the environment and doctrees with the others
-I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-
-# commands; the 'cmd' from scripts/Kbuild.include is not *loopable*
-loop_cmd = $(echo-cmd) $(cmd_$(1)) || exit;
-
-# $2 sphinx builder e.g. "html"
-# $3 name of the build subfolder / e.g. "media", used as:
-# * dest folder relative to $(BUILDDIR) and
-# * cache folder relative to $(BUILDDIR)/.doctrees
-# $4 dest subfolder e.g. "man" for man pages at media/man
-# $5 reST source folder relative to $(srctree)/$(src),
-# e.g. "media" for the linux-tv book-set at ./Documentation/media
-
-quiet_cmd_sphinx = SPHINX $@ --> file://$(abspath $(BUILDDIR)/$3/$4)
- cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media $2 && \
- PYTHONDONTWRITEBYTECODE=1 \
- BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(srctree)/$(src)/$5/$(SPHINX_CONF)) \
- $(SPHINXBUILD) \
- -b $2 \
- -c $(abspath $(srctree)/$(src)) \
- -d $(abspath $(BUILDDIR)/.doctrees/$3) \
- -D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) \
- $(ALLSPHINXOPTS) \
- $(abspath $(srctree)/$(src)/$5) \
- $(abspath $(BUILDDIR)/$3/$4)
-
-htmldocs:
- @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
-
-linkcheckdocs:
- @$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,linkcheck,$(var),,$(var)))
-
-latexdocs:
- @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,latex,$(var),latex,$(var)))
-
-ifeq ($(HAVE_PDFLATEX),0)
-
-pdfdocs:
- $(warning The '$(PDFLATEX)' command was not found. Make sure you have it installed and in PATH to produce PDF output.)
- @echo " SKIP Sphinx $@ target."
-
-else # HAVE_PDFLATEX
-
-pdfdocs: latexdocs
- $(foreach var,$(SPHINXDIRS), $(MAKE) PDFLATEX=$(PDFLATEX) LATEXOPTS="$(LATEXOPTS)" -C $(BUILDDIR)/$(var)/latex || exit;)
-
-endif # HAVE_PDFLATEX
-
-epubdocs:
- @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,epub,$(var),epub,$(var)))
-
-xmldocs:
- @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,xml,$(var),xml,$(var)))
-
-endif # HAVE_SPHINX
-
-# The following targets are independent of HAVE_SPHINX, and the rules should
-# work or silently pass without Sphinx.
-
-# no-ops for the Sphinx toolchain
-sgmldocs:
- @:
-psdocs:
- @:
-mandocs:
- @:
-installmandocs:
- @:
-
-cleandocs:
- $(Q)rm -rf $(BUILDDIR)
- $(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media clean
-
-dochelp:
- @echo ' Linux kernel internal documentation in different formats (Sphinx):'
- @echo ' htmldocs - HTML'
- @echo ' latexdocs - LaTeX'
- @echo ' pdfdocs - PDF'
- @echo ' epubdocs - EPUB'
- @echo ' xmldocs - XML'
- @echo ' linkcheckdocs - check for broken external links (will connect to external hosts)'
- @echo ' cleandocs - clean all generated files'
- @echo
- @echo ' make SPHINXDIRS="s1 s2" [target] Generate only docs of folder s1, s2'
- @echo ' valid values for SPHINXDIRS are: $(_SPHINXDIRS)'
- @echo
- @echo ' make SPHINX_CONF={conf-file} [target] use *additional* sphinx-build'
- @echo ' configuration. This is e.g. useful to build with nit-picking config.'
diff --git a/Documentation/doc-guide/docbook.rst b/Documentation/doc-guide/docbook.rst
deleted file mode 100644
index d8bf04308b43..000000000000
--- a/Documentation/doc-guide/docbook.rst
+++ /dev/null
@@ -1,90 +0,0 @@
-DocBook XML [DEPRECATED]
-========================
-
-.. attention::
-
- This section describes the deprecated DocBook XML toolchain. Please do not
- create new DocBook XML template files. Please consider converting existing
- DocBook XML templates files to Sphinx/reStructuredText.
-
-Converting DocBook to Sphinx
-----------------------------
-
-Over time, we expect all of the documents under ``Documentation/DocBook`` to be
-converted to Sphinx and reStructuredText. For most DocBook XML documents, a good
-enough solution is to use the simple ``Documentation/sphinx/tmplcvt`` script,
-which uses ``pandoc`` under the hood. For example::
-
- $ cd Documentation/sphinx
- $ ./tmplcvt ../DocBook/in.tmpl ../out.rst
-
-Then edit the resulting rst files to fix any remaining issues, and add the
-document in the ``toctree`` in ``Documentation/index.rst``.
-
-Components of the kernel-doc system
------------------------------------
-
-Many places in the source tree have extractable documentation in the form of
-block comments above functions. The components of this system are:
-
-- ``scripts/kernel-doc``
-
- This is a perl script that hunts for the block comments and can mark them up
- directly into reStructuredText, DocBook, man, text, and HTML. (No, not
- texinfo.)
-
-- ``Documentation/DocBook/*.tmpl``
-
- These are XML template files, which are normal XML files with special
- place-holders for where the extracted documentation should go.
-
-- ``scripts/docproc.c``
-
- This is a program for converting XML template files into XML files. When a
- file is referenced it is searched for symbols exported (EXPORT_SYMBOL), to be
- able to distinguish between internal and external functions.
-
- It invokes kernel-doc, giving it the list of functions that are to be
- documented.
-
- Additionally it is used to scan the XML template files to locate all the files
- referenced herein. This is used to generate dependency information as used by
- make.
-
-- ``Makefile``
-
- The targets 'xmldocs', 'psdocs', 'pdfdocs', and 'htmldocs' are used to build
- DocBook XML files, PostScript files, PDF files, and html files in
- Documentation/DocBook. The older target 'sgmldocs' is equivalent to 'xmldocs'.
-
-- ``Documentation/DocBook/Makefile``
-
- This is where C files are associated with SGML templates.
-
-How to use kernel-doc comments in DocBook XML template files
-------------------------------------------------------------
-
-DocBook XML template files (\*.tmpl) are like normal XML files, except that they
-can contain escape sequences where extracted documentation should be inserted.
-
-``!E<filename>`` is replaced by the documentation, in ``<filename>``, for
-functions that are exported using ``EXPORT_SYMBOL``: the function list is
-collected from files listed in ``Documentation/DocBook/Makefile``.
-
-``!I<filename>`` is replaced by the documentation for functions that are **not**
-exported using ``EXPORT_SYMBOL``.
-
-``!D<filename>`` is used to name additional files to search for functions
-exported using ``EXPORT_SYMBOL``.
-
-``!F<filename> <function [functions...]>`` is replaced by the documentation, in
-``<filename>``, for the functions listed.
-
-``!P<filename> <section title>`` is replaced by the contents of the ``DOC:``
-section titled ``<section title>`` from ``<filename>``. Spaces are allowed in
-``<section title>``; do not quote the ``<section title>``.
-
-``!C<filename>`` is replaced by nothing, but makes the tools check that all DOC:
-sections and documented functions, symbols, etc. are used. This makes sense to
-use when you use ``!F`` or ``!P`` only and want to verify that all documentation
-is included.
diff --git a/Makefile b/Makefile
index 220121fdca4d..80be98ccca60 100644
--- a/Makefile
+++ b/Makefile
@@ -1298,7 +1298,7 @@ clean: archclean vmlinuxclean
#
mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
-mrproper-dirs := $(addprefix _mrproper_,Documentation/DocBook scripts)
+mrproper-dirs := $(addprefix _mrproper_,scripts)

PHONY += $(mrproper-dirs) mrproper archmrproper
$(mrproper-dirs):
@@ -1400,9 +1400,7 @@ help:
@$(MAKE) $(build)=$(package-dir) help
@echo ''
@echo 'Documentation targets:'
- @$(MAKE) -f $(srctree)/Documentation/Makefile.sphinx dochelp
- @echo ''
- @$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
+ @$(MAKE) -f $(srctree)/Documentation/Makefile dochelp
@echo ''
@echo 'Architecture specific targets ($(SRCARCH)):'
@$(if $(archhelp),$(archhelp),\
@@ -1453,9 +1451,8 @@ $(help-board-dirs): help-%:
DOC_TARGETS := xmldocs sgmldocs psdocs latexdocs pdfdocs htmldocs mandocs installmandocs epubdocs cleandocs linkcheckdocs
PHONY += $(DOC_TARGETS)
$(DOC_TARGETS): scripts_basic FORCE
- $(Q)$(MAKE) $(build)=scripts build_docproc build_check-lc_ctype
- $(Q)$(MAKE) $(build)=Documentation -f $(srctree)/Documentation/Makefile.sphinx $@
- $(Q)$(MAKE) $(build)=Documentation/DocBook $@
+ $(Q)$(MAKE) $(build)=scripts build_docproc
+ $(Q)$(MAKE) $(build)=Documentation $@

else # KBUILD_EXTMOD

diff --git a/scripts/Makefile b/scripts/Makefile
index 1d80897a9644..55550e4141c4 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -6,8 +6,7 @@
# pnmttologo: Convert pnm files to logo files
# conmakehash: Create chartable
# conmakehash: Create arrays for initializing the kernel console tables
-# docproc: Used in Documentation/DocBook
-# check-lc_ctype: Used in Documentation/DocBook
+# docproc: Used in Documentation/

HOST_EXTRACFLAGS += -I$(srctree)/tools/include

@@ -29,16 +28,14 @@ HOSTLOADLIBES_extract-cert = -lcrypto
always := $(hostprogs-y) $(hostprogs-m)

# The following hostprogs-y programs are only build on demand
-hostprogs-y += unifdef docproc check-lc_ctype
+hostprogs-y += unifdef docproc

# These targets are used internally to avoid "is up to date" messages
-PHONY += build_unifdef build_docproc build_check-lc_ctype
+PHONY += build_unifdef build_docproc
build_unifdef: $(obj)/unifdef
@:
build_docproc: $(obj)/docproc
@:
-build_check-lc_ctype: $(obj)/check-lc_ctype
- @:

subdir-$(CONFIG_MODVERSIONS) += genksyms
subdir-y += mod
diff --git a/scripts/check-lc_ctype.c b/scripts/check-lc_ctype.c
deleted file mode 100644
index 9097ff5449fb..000000000000
--- a/scripts/check-lc_ctype.c
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * Check that a specified locale works as LC_CTYPE. Used by the
- * DocBook build system to probe for C.UTF-8 support.
- */
-
-#include <locale.h>
-
-int main(void)
-{
- return !setlocale(LC_CTYPE, "");
-}
--
2.9.3

Next message: Mauro Carvalho Chehab: "[PATCH v2 43/53] docs: update old references for DocBook from the documentation"
Previous message: Mauro Carvalho Chehab: "[PATCH v2 37/53] docs-rst: convert mtdnand book to ReST"
In reply to: Boris Brezillon: "Re: [PATCH v2 37/53] docs-rst: convert mtdnand book to ReST"
Next in thread: Mauro Carvalho Chehab: "[PATCH v2 43/53] docs: update old references for DocBook from the documentation"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]