Re: [PATCH 3/4] Documentation: dt: Add bindings documentation for CSI-2 Host Video Platform

[Ramiro Oliveira]

Hi Sakari,

Thank you for your feedback and sorry for the late response.

On 3/8/2017 1:18 PM, Sakari Ailus wrote:
> Hi Ramiro,
> 
> On Tue, Mar 07, 2017 at 02:37:50PM +0000, Ramiro Oliveira wrote:
>> Create device tree bindings documentation for the CSI-2 Host Video
>>  platform.
> 
> Extra space here.
> 
>>
>> Signed-off-by: Ramiro Oliveira <roliveir@xxxxxxxxxxxx>
>> ---
>>  .../devicetree/bindings/media/snps,plat-csi2.txt   | 77 ++++++++++++++++++++++
>>  1 file changed, 77 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/media/snps,plat-csi2.txt
>>
>> diff --git a/Documentation/devicetree/bindings/media/snps,plat-csi2.txt b/Documentation/devicetree/bindings/media/snps,plat-csi2.txt
>> new file mode 100644
>> index 000000000000..f559257a0a44
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/snps,plat-csi2.txt
>> @@ -0,0 +1,77 @@
>> +Synopsys DesignWare CSI-2 Host Video Platform
>> +
>> +The Synopsys DesignWare CSI-2 Host Video Device subsystem comprises of multiple
>> +sub-devices represented by separate device tree nodes. Currently this includes:
>> +plat-csi2, video-device, and dw-mipi-csi.
>> +
>> +The sub-subdevices are defined as child nodes of the common 'camera'.
>> +
>> +Common 'camera' node
>> +--------------------
>> +
>> +Required properties:
>> +
>> +- compatible: must be "snps,plat-csi2", "simple-bus"
>> +
>> +The 'camera' node must include at least one 'video-device' and one 'dw-mipi-csi'
>> +child node.
>> +
>> +'video-device' device nodes
>> +-------------------
>> +
>> +Required properties:
>> +
>> +- compatible: "snps,video-device"
>> +- dmas, dma-names: List of one DMA specifier and identifier string (as defined
>> +  in Documentation/devicetree/bindings/dma/dma.txt) per port. Each port
>> +  requires a DMA channel with the identifier string set to "vdma" followed by
>> +  the port index.
>> +
>> +Image sensor nodes
>> +------------------
>> +
>> +The sensor device nodes should be added to their control bus controller (e.g.
>> +I2C0) nodes and linked to a port node in the dw-mipi-csi,using the common video
>> +interfaces bindings, defined in video-interfaces.txt.
> 
> You should defined which properties you explicitly support on endpoints and
> elsewhere. There are some optional ones for CSI-2, for instance.
> 

I'll take a look and see if it makes sense to add support for some properties

>> +
>> +Example:
>> +
>> +
>> +	camera {
>> +		compatible = "snps,plat-csi2", "simple-bus";
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges;
> 
> Is there something missing here?
> 

I don't think so, but should I add something?

>> +			video_device: video-device@0x10000 {
>> +				compatible = "snps,video-device";
>> +				dmas = <&axi_vdma_0 0>;
>> +				dma-names = "vdma0";
>> +			};
>> +
>> +			csi2:	csi2@0x03000 {
>> +				compatible = "snps,dw-mipi-csi";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				reg = < 0x03000 0x7FF>;
>> +				interrupts = <2>;
>> +				phys = <&mipi_phy_ctrl1 0>;
>> +				resets = <&csi2_rst 1>;
>> +
>> +				output-type = <2>;
>> +				ipi-mode = <0>;
>> +				ipi-color-mode = <0>;
>> +				ipi-auto-flush = <1>;
>> +				virtual-channel = <0>;
>> +
>> +				port@1 {
> 
> What are the valid ports for this device?
> 

I don't think I understand what you mean by valid.

>> +					reg = <1>;
>> +					csi1_ep1: endpoint {
>> +						remote-endpoint = <&camera>;
>> +						data-lanes = <1 2>;
>> +					};
>> +				};
>> +			};
>> +		};
>> +	};
>> +
>> +The dw-mipi-csi device binding is defined in snps,dw-mipi-csi.txt.
> 

-- 
Best Regards

Ramiro Oliveira
Ramiro.Oliveira@xxxxxxxxxxxx