[PATCH 12/22] scsi: hisi_sas: add phy up/down/bcast and channel ISR
From: John Garry
Date: Wed May 17 2017 - 06:23:08 EST
From: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
Add code to initialise interrupts and add some interrupt handlers.
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
Signed-off-by: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
---
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 281 +++++++++++++++++++++++++++++++++
1 file changed, 281 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index ea18582..f7872c5 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -172,6 +172,13 @@ enum {
HISI_SAS_PHY_INT_NR
};
+static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off)
+{
+ void __iomem *regs = hisi_hba->regs + off;
+
+ return readl(regs);
+}
+
static void hisi_sas_write32(struct hisi_hba *hisi_hba, u32 off, u32 val)
{
void __iomem *regs = hisi_hba->regs + off;
@@ -396,6 +403,276 @@ static void sl_notify_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
}
+static int phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
+{
+ int i, res = 0;
+ u32 context, port_id, link_rate, hard_phy_linkrate;
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct device *dev = hisi_hba->dev;
+
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_PHY_ENA_MSK, 1);
+
+ port_id = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA);
+ port_id = (port_id >> (4 * phy_no)) & 0xf;
+ link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE);
+ link_rate = (link_rate >> (phy_no * 4)) & 0xf;
+
+ if (port_id == 0xf) {
+ dev_err(dev, "phyup: phy%d invalid portid\n", phy_no);
+ res = IRQ_NONE;
+ goto end;
+ }
+ sas_phy->linkrate = link_rate;
+ hard_phy_linkrate = hisi_sas_phy_read32(hisi_hba, phy_no,
+ HARD_PHY_LINKRATE);
+ phy->maximum_linkrate = hard_phy_linkrate & 0xf;
+ phy->minimum_linkrate = (hard_phy_linkrate >> 4) & 0xf;
+ phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+
+ /* Check for SATA dev */
+ context = hisi_sas_read32(hisi_hba, PHY_CONTEXT);
+ if (context & (1 << phy_no)) {
+ struct hisi_sas_initial_fis *initial_fis;
+ struct dev_to_host_fis *fis;
+ u8 attached_sas_addr[SAS_ADDR_SIZE] = {0};
+
+ dev_info(dev, "phyup: phy%d link_rate=%d\n", phy_no, link_rate);
+ initial_fis = &hisi_hba->initial_fis[phy_no];
+ fis = &initial_fis->fis;
+ sas_phy->oob_mode = SATA_OOB_MODE;
+ attached_sas_addr[0] = 0x50;
+ attached_sas_addr[7] = phy_no;
+ memcpy(sas_phy->attached_sas_addr,
+ attached_sas_addr,
+ SAS_ADDR_SIZE);
+ memcpy(sas_phy->frame_rcvd, fis,
+ sizeof(struct dev_to_host_fis));
+ phy->phy_type |= PORT_TYPE_SATA;
+ phy->identify.device_type = SAS_SATA_DEV;
+ phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
+ phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
+ } else {
+ u32 *frame_rcvd = (u32 *)sas_phy->frame_rcvd;
+ struct sas_identify_frame *id =
+ (struct sas_identify_frame *)frame_rcvd;
+
+ dev_info(dev, "phyup: phy%d link_rate=%d\n", phy_no, link_rate);
+ for (i = 0; i < 6; i++) {
+ u32 idaf = hisi_sas_phy_read32(hisi_hba, phy_no,
+ RX_IDAF_DWORD0 + (i * 4));
+ frame_rcvd[i] = __swab32(idaf);
+ }
+ sas_phy->oob_mode = SAS_OOB_MODE;
+ memcpy(sas_phy->attached_sas_addr,
+ &id->sas_addr,
+ SAS_ADDR_SIZE);
+ phy->phy_type |= PORT_TYPE_SAS;
+ phy->identify.device_type = id->dev_type;
+ phy->frame_rcvd_size = sizeof(struct sas_identify_frame);
+ if (phy->identify.device_type == SAS_END_DEVICE)
+ phy->identify.target_port_protocols =
+ SAS_PROTOCOL_SSP;
+ else if (phy->identify.device_type != SAS_PHY_UNUSED)
+ phy->identify.target_port_protocols =
+ SAS_PROTOCOL_SMP;
+ }
+
+ phy->port_id = port_id;
+ phy->phy_attached = 1;
+ queue_work(hisi_hba->wq, &phy->phyup_ws);
+
+end:
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
+ CHL_INT0_SL_PHY_ENABLE_MSK);
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_PHY_ENA_MSK, 0);
+
+ return res;
+}
+
+static int phy_down_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
+{
+ int res = 0;
+ u32 phy_state, sl_ctrl, txid_auto;
+ struct device *dev = hisi_hba->dev;
+
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_NOT_RDY_MSK, 1);
+
+ phy_state = hisi_sas_read32(hisi_hba, PHY_STATE);
+ dev_info(dev, "phydown: phy%d phy_state=0x%x\n", phy_no, phy_state);
+ hisi_sas_phy_down(hisi_hba, phy_no, (phy_state & 1 << phy_no) ? 1 : 0);
+
+ sl_ctrl = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
+ hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL,
+ sl_ctrl&(~SL_CTA_MSK));
+
+ txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no, TXID_AUTO);
+ hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
+ txid_auto | CT3_MSK);
+
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, CHL_INT0_NOT_RDY_MSK);
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_NOT_RDY_MSK, 0);
+
+ return res;
+}
+
+static void phy_bcast_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
+{
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_ha_struct *sas_ha = &hisi_hba->sha;
+
+ hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 1);
+ sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
+ CHL_INT0_SL_RX_BCST_ACK_MSK);
+ hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 0);
+}
+
+static irqreturn_t int_phy_up_down_bcast_v3_hw(int irq_no, void *p)
+{
+ struct hisi_hba *hisi_hba = p;
+ u32 irq_msk;
+ int phy_no = 0;
+ irqreturn_t res = IRQ_NONE;
+
+ irq_msk = hisi_sas_read32(hisi_hba, CHNL_INT_STATUS)
+ & 0x11111111;
+ while (irq_msk) {
+ if (irq_msk & 1) {
+ u32 irq_value = hisi_sas_phy_read32(hisi_hba, phy_no,
+ CHL_INT0);
+ u32 phy_state = hisi_sas_read32(hisi_hba, PHY_STATE);
+ int rdy = phy_state & (1 << phy_no);
+
+ if (rdy) {
+ if (irq_value & CHL_INT0_SL_PHY_ENABLE_MSK)
+ /* phy up */
+ if (phy_up_v3_hw(phy_no, hisi_hba)
+ == IRQ_HANDLED)
+ res = IRQ_HANDLED;
+ if (irq_value & CHL_INT0_SL_RX_BCST_ACK_MSK)
+ /* phy bcast */
+ phy_bcast_v3_hw(phy_no, hisi_hba);
+ } else {
+ if (irq_value & CHL_INT0_NOT_RDY_MSK)
+ /* phy down */
+ if (phy_down_v3_hw(phy_no, hisi_hba)
+ == IRQ_HANDLED)
+ res = IRQ_HANDLED;
+ }
+ }
+ irq_msk >>= 4;
+ phy_no++;
+ }
+
+ return res;
+}
+
+static irqreturn_t int_chnl_int_v3_hw(int irq_no, void *p)
+{
+ struct hisi_hba *hisi_hba = p;
+ struct device *dev = hisi_hba->dev;
+ u32 ent_msk, ent_tmp, irq_msk;
+ int phy_no = 0;
+
+ ent_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK3);
+ ent_tmp = ent_msk;
+ ent_msk |= ENT_INT_SRC_MSK3_ENT95_MSK_MSK;
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, ent_msk);
+
+ irq_msk = hisi_sas_read32(hisi_hba, CHNL_INT_STATUS)
+ & 0xeeeeeeee;
+
+ while (irq_msk) {
+ u32 irq_value0 = hisi_sas_phy_read32(hisi_hba, phy_no,
+ CHL_INT0);
+ u32 irq_value1 = hisi_sas_phy_read32(hisi_hba, phy_no,
+ CHL_INT1);
+ u32 irq_value2 = hisi_sas_phy_read32(hisi_hba, phy_no,
+ CHL_INT2);
+
+ if ((irq_msk & (4 << (phy_no * 4))) &&
+ irq_value1) {
+ if (irq_value1 & (CHL_INT1_DMAC_RX_ECC_ERR_MSK |
+ CHL_INT1_DMAC_TX_ECC_ERR_MSK))
+ panic("%s: DMAC RX/TX ecc bad error! (0x%x)",
+ dev_name(dev), irq_value1);
+
+ hisi_sas_phy_write32(hisi_hba, phy_no,
+ CHL_INT1, irq_value1);
+ }
+
+ if (irq_msk & (8 << (phy_no * 4)) && irq_value2)
+ hisi_sas_phy_write32(hisi_hba, phy_no,
+ CHL_INT2, irq_value2);
+
+
+ if (irq_msk & (2 << (phy_no * 4)) && irq_value0) {
+ hisi_sas_phy_write32(hisi_hba, phy_no,
+ CHL_INT0, irq_value0
+ & (~CHL_INT0_HOTPLUG_TOUT_MSK)
+ & (~CHL_INT0_SL_PHY_ENABLE_MSK)
+ & (~CHL_INT0_NOT_RDY_MSK));
+ }
+ irq_msk &= ~(0xe << (phy_no * 4));
+ phy_no++;
+ }
+
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, ent_tmp);
+
+ return IRQ_HANDLED;
+}
+
+static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
+ int_phy_up_down_bcast_v3_hw,
+ int_chnl_int_v3_hw,
+};
+
+static int interrupt_init_v3_hw(struct hisi_hba *hisi_hba)
+{
+ struct device *dev = hisi_hba->dev;
+ struct pci_dev *pdev = hisi_hba->pci_dev;
+ int vectors, i, irq, rc;
+ int max_msi = HISI_SAS_MSI_COUNT_V3_HW;
+ int msi_vectors[HISI_SAS_MSI_COUNT_V3_HW];
+
+ if (pdev->msi_enabled)
+ pci_disable_msi(pdev);
+
+ vectors = pci_alloc_irq_vectors(hisi_hba->pci_dev, 1,
+ max_msi, PCI_IRQ_MSI);
+ if (vectors < max_msi) {
+ dev_err(dev, "could not allocate all msi (%d)\n", vectors);
+ return -ENOENT;
+ }
+
+ for (i = 0; i < vectors; i++)
+ msi_vectors[i] = pdev->irq + i;
+
+ for (i = 0; i < HISI_SAS_PHY_INT_NR; i++) {
+ int idx = i;
+
+ irq = msi_vectors[idx + 1]; /* Phy up/down/bcast is irq1 */
+ if (!irq) {
+ dev_err(dev, "irq init: failed to map PHY interrupt %d\n",
+ idx);
+ return -ENOENT;
+ }
+
+ rc = devm_request_irq(dev, irq, phy_interrupts[i], 0,
+ DRV_NAME " phy", hisi_hba);
+ if (rc) {
+ dev_err(dev, "irq init: could not request "
+ "phy interrupt %d, rc=%d\n",
+ irq, rc);
+ return -ENOENT;
+ }
+ }
+
+ return 0;
+}
+
static int hisi_sas_v3_init(struct hisi_hba *hisi_hba)
{
int rc;
@@ -404,6 +681,10 @@ static int hisi_sas_v3_init(struct hisi_hba *hisi_hba)
if (rc)
return rc;
+ rc = interrupt_init_v3_hw(hisi_hba);
+ if (rc)
+ return rc;
+
return 0;
}
--
1.9.1