çå: çå: [PATCH 1/2] PCI: dwc: kirin: add PCIe Driver for HiSilicon Kirin SoC

[songxiaowei]

-----éäåä-----
åää: Niklas Cassel [mailto:niklas.cassel@xxxxxxxx] 
åéæé: 2017å5æ18æ 16:57
æää: Guodong Xu; songxiaowei
æé: Arnd Bergmann; Bjorn Helgaas; Kishon; Jingoo Han; Tomasz Nowicki; Keith Busch; Duc Dang; liudongdong (C); Chenfeng (puck); Wangbinghui; Suzhuangluan; Linux Kernel Mailing List; linux-pci
äé: Re: çå: [PATCH 1/2] PCI: dwc: kirin: add PCIe Driver for HiSilicon Kirin SoC



On 05/18/2017 08:23 AM, Guodong Xu wrote:
> On Thu, May 18, 2017 at 9:50 AM, songxiaowei <songxiaowei@xxxxxxxxxxxxx> wrote:
>> Hi Arnd,
>>
>>
>> On Fri, May 12, 2017 at 3:51 AM, Song Xiaowei <songxiaowei@xxxxxxxxxxxxx> wrote:
>>> From: songxiaowei <songxiaowei@xxxxxxxxxxxxx>
>>
>> Looks good overall, just a few details:
>>
>> Please fix your ~/.gitconfig to contain the same real name ("Song Xiaowei"
>> instead of "songxiaowei") that you use for sending the emails.
>>
>> [Xiaowei Song]  I'll fix this issue and update the patch.
>>
>>> +
>>> +static int kirin_pcie_phy_init(struct kirin_pcie *kirin_pcie) {
>> ...
>>> +       reg_val = kirin_apb_phy_readl(kirin_pcie, 0x400);
>>> +       while (reg_val & pipe_clk_stable) {
>>> +               udelay(100);
>>> +               if (time == 0) {
>>> +                       dev_err(kirin_pcie->pci->dev, "PIPE clk is not stable\n");
>>> +                       return -EINVAL;
>>> +               }
>>> +               time--;
>>> +               reg_val = kirin_apb_phy_readl(kirin_pcie, 0x400);
>>> +       }
>>
>> If this is not called with interrupts disabled, please use a sleeping function (e.g. msleep(1)) as the delay and compare against ktime_before() to see how much total time has expired when waiting for a timeout, instead of using a counter.
>>
>> [Xiaowei Song] This issue was fixed in the patch sent at 2017-5-15, and I'll send it again.
> 
> Xiaowei,
> 
> Please make sure you add [PATCH v..] version information when you 
> making future updates. Eg.
> 
> $ git format-patch --subject-prefix="PATCH v3"

I actually prefer

git format-patch -v 3

that way you don't accidentally get something other than "PATCH".



Another very, very minor remark.
It's usually a good idea to have a comma after each initializer, that way you don't have to change multiple lines when adding/removing something.

[songxiaowei] I should fix this point immediately, Thank you a lot.

+struct platform_driver kirin_pcie_driver = {
+	.probe			= kirin_pcie_probe,
+	.driver			= {
+		.name			= "Kirin-pcie",
+		.of_match_table = kirin_pcie_match,
+		.suppress_bind_attrs = true
+	},
+};


Best regards,
Xiaowei