[PATCH 36/41] ARM: dts: am57xx-idk: Set MMC2 IO voltage to 3.3V

[Kishon Vijay Abraham I]

From: Sekhar Nori <nsekhar@xxxxxx>

MMC2 interface on AM57xx IDK, connected to
onboard eMMC, has IO voltage fixed to 3.3V.

Add no-1-8-v device-tree property to mmc2 node
in the board's device-tree file to reflect
this.

Note that the AM57xx SoC itself supports
dual-voltage on MMC2. The limitation above is
due to the board.

Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
 arch/arm/boot/dts/am57xx-idk-common.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 5d6965ab7339..a8c9e5f714e4 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -413,6 +413,7 @@
 	bus-width = <8>;
 	ti,non-removable;
 	max-frequency = <96000000>;
+	no-1-8-v;
 	/delete-property/ mmc-hs200-1_8v;
 };
 
-- 
2.11.0