Re: [PATCH net] bonding: fix randomly populated arp target array

[Mahesh Bandewar (àààà ààààààà)]

On Fri, May 19, 2017 at 11:46 AM, Jarod Wilson <jarod@xxxxxxxxxx> wrote:
> In commit dc9c4d0fe023, the arp_target array moved from a static global
> to a local variable. By the nature of static globals, the array used to
> be initialized to all 0. At present, it's full of random data, which
> that gets interpreted as arp_target values, when none have actually been
> specified. Systems end up booting with spew along these lines:
>
> [   32.161783] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
> [   32.168475] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
> [   32.175089] 8021q: adding VLAN 0 to HW filter on device lacp0
> [   32.193091] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
> [   32.204892] lacp0: Setting MII monitoring interval to 100
> [   32.211071] lacp0: Removing ARP target 216.124.228.17
> [   32.216824] lacp0: Removing ARP target 218.160.255.255
> [   32.222646] lacp0: Removing ARP target 185.170.136.184
> [   32.228496] lacp0: invalid ARP target 255.255.255.255 specified for removal
> [   32.236294] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
> [   32.243987] lacp0: Removing ARP target 56.125.228.17
> [   32.249625] lacp0: Removing ARP target 218.160.255.255
> [   32.255432] lacp0: Removing ARP target 15.157.233.184
> [   32.261165] lacp0: invalid ARP target 255.255.255.255 specified for removal
> [   32.268939] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
> [   32.276632] lacp0: Removing ARP target 16.0.0.0
> [   32.281755] lacp0: Removing ARP target 218.160.255.255
> [   32.287567] lacp0: Removing ARP target 72.125.228.17
> [   32.293165] lacp0: Removing ARP target 218.160.255.255
> [   32.298970] lacp0: Removing ARP target 8.125.228.17
> [   32.304458] lacp0: Removing ARP target 218.160.255.255
>
> None of these were actually specified as ARP targets, and the driver does
> seem to clean up the mess okay, but it's rather noisy and confusing, leaks
> values to userspace, and the 255.255.255.255 spew shows up even when debug
> prints are disabled.
>
> The fix: just zero out arp_target at init time.
>
> While we're in here, init arp_all_targets_value in the right place.
>
> Fixes: dc9c4d0fe023 ("bonding: reduce scope of some global variables")
> CC: Mahesh Bandewar <maheshb@xxxxxxxxxx>
> CC: Jay Vosburgh <j.vosburgh@xxxxxxxxx>
> CC: Veaceslav Falico <vfalico@xxxxxxxxx>
> CC: Andy Gospodarek <andy@xxxxxxxxxxxxx>
> CC: netdev@xxxxxxxxxxxxxxx
> CC: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Jarod Wilson <jarod@xxxxxxxxxx>
> ---
>  drivers/net/bonding/bond_main.c | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
> index 2be78807fd6e..73313318399c 100644
> --- a/drivers/net/bonding/bond_main.c
> +++ b/drivers/net/bonding/bond_main.c
> @@ -4271,10 +4271,10 @@ static int bond_check_params(struct bond_params *params)
>         int arp_validate_value, fail_over_mac_value, primary_reselect_value, i;
>         struct bond_opt_value newval;
>         const struct bond_opt_value *valptr;
> -       int arp_all_targets_value;
> +       int arp_all_targets_value = 0;

I think this is unnecessary as long as the var is initialized before it's use.

>         u16 ad_actor_sys_prio = 0;
>         u16 ad_user_port_key = 0;
> -       __be32 arp_target[BOND_MAX_ARP_TARGETS];
> +       __be32 arp_target[BOND_MAX_ARP_TARGETS] = { 0 };

this is the only change required to avoid reported error.

>         int arp_ip_count;
>         int bond_mode   = BOND_MODE_ROUNDROBIN;
>         int xmit_hashtype = BOND_XMIT_POLICY_LAYER2;
> @@ -4501,7 +4501,6 @@ static int bond_check_params(struct bond_params *params)
>                 arp_validate_value = 0;
>         }
>
> -       arp_all_targets_value = 0;
>         if (arp_all_targets) {
>                 bond_opt_initstr(&newval, arp_all_targets);
>                 valptr = bond_opt_parse(bond_opt_get(BOND_OPT_ARP_ALL_TARGETS),
> --
> 2.12.1
>