Re: [PATCH] ARM: cpuidle: Support asymmetric idle definition

[Daniel Lezcano]

Hi Sudeep,


On 22/05/2017 12:11, Sudeep Holla wrote:
> 
> 
> On 19/05/17 17:45, Daniel Lezcano wrote:
>> Some hardware have clusters with different idle states. The current code does
>> not support this and fails as it expects all the idle states to be identical.
>>
>> Because of this, the Mediatek mtk8173 had to create the same idle state for a
>> big.Little system and now the Hisilicon 960 is facing the same situation.
>>
> 
> While I agree the we don't support them today, it's better to benchmark
> and record/compare the gain we get with the support for cluster based
> idle states.

Sorry, I don't get what you are talking about. What do you want to
benchmark ? Cluster idling ?

>> Solve this by simply assuming the multiple driver will be needed for all the
>> platforms using the ARM generic cpuidle driver which makes sense because of the
>> different topologies we can support with a single kernel for ARM32 or ARM64.
>>
> 
> Unfortunately, it's not true always and for sure will break with the new
> ARM DynamIQ [1]

We will see when a platform will be available for testing :)

>> Tested on:
>>  - 96boards: Hikey 620
>>  - 96boards: Hikey 960
>>  - 96boards: dragonboard410c
>>  - Mediatek 8173
>>
>> Tested-by: Leo Yan <leo.yan@xxxxxxxxxx>
>> Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
>> ---
>>  drivers/cpuidle/Kconfig.arm   |  1 +
>>  drivers/cpuidle/cpuidle-arm.c | 55 +++++++++++++++++++++++++++++--------------
>>  2 files changed, 38 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
>> index 21340e0..f521448 100644
>> --- a/drivers/cpuidle/Kconfig.arm
>> +++ b/drivers/cpuidle/Kconfig.arm
>> @@ -4,6 +4,7 @@
>>  config ARM_CPUIDLE
>>          bool "Generic ARM/ARM64 CPU idle Driver"
>>          select DT_IDLE_STATES
>> +	select CPU_IDLE_MULTIPLE_DRIVERS
>>          help
>>            Select this to enable generic cpuidle driver for ARM.
>>            It provides a generic idle driver whose idle states are configured
>> diff --git a/drivers/cpuidle/cpuidle-arm.c b/drivers/cpuidle/cpuidle-arm.c
>> index f440d38..bec31d5 100644
>> --- a/drivers/cpuidle/cpuidle-arm.c
>> +++ b/drivers/cpuidle/cpuidle-arm.c
>> @@ -18,6 +18,7 @@
>>  #include <linux/module.h>
>>  #include <linux/of.h>
>>  #include <linux/slab.h>
>> +#include <linux/topology.h>
>>  
>>  #include <asm/cpuidle.h>
>>  
>> @@ -44,7 +45,7 @@ static int arm_enter_idle_state(struct cpuidle_device *dev,
>>  	return CPU_PM_CPU_IDLE_ENTER(arm_cpuidle_suspend, idx);
>>  }
>>  
>> -static struct cpuidle_driver arm_idle_driver = {
>> +static struct cpuidle_driver arm_idle_driver __initdata = {
>>  	.name = "arm_idle",
>>  	.owner = THIS_MODULE,
>>  	/*
>> @@ -80,23 +81,40 @@ static const struct of_device_id arm_idle_state_match[] __initconst = {
>>  static int __init arm_idle_init(void)
>>  {
>>  	int cpu, ret;
>> -	struct cpuidle_driver *drv = &arm_idle_driver;
>> +	struct cpuidle_driver *drv = NULL;
>>  	struct cpuidle_device *dev;
>>  
>> -	/*
>> -	 * Initialize idle states data, starting at index 1.
>> -	 * This driver is DT only, if no DT idle states are detected (ret == 0)
>> -	 * let the driver initialization fail accordingly since there is no
>> -	 * reason to initialize the idle driver if only wfi is supported.
>> -	 */
>> -	ret = dt_init_idle_driver(drv, arm_idle_state_match, 1);
>> -	if (ret <= 0)
>> -		return ret ? : -ENODEV;
>> -
>> -	ret = cpuidle_register_driver(drv);
>> -	if (ret) {
>> -		pr_err("Failed to register cpuidle driver\n");
>> -		return ret;
>> +	for_each_possible_cpu(cpu) {
>> +
>> +		if (drv && cpumask_test_cpu(cpu, drv->cpumask))
>> +			continue;
>> +
>> +		ret = -ENOMEM;
>> +
>> +		drv = kmemdup(&arm_idle_driver, sizeof(*drv), GFP_KERNEL);
>> +		if (!drv)
>> +			goto out_fail;
>> +
>> +		drv->cpumask = &cpu_topology[cpu].core_sibling;
>> +
> 
> This is not always true and not architecturally guaranteed. So instead
> of introducing this broken dependency, better to extract information
> from the device tree.

Can you give an example of a broken dependency ?

The cpu topology information is extracted from the device tree. So if
the topology is broken, the DT is broken also. Otherwise, the topology
code must fix the broken dependency from the DT.





-- 
 <http://www.linaro.org/> Linaro.org â Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog